Related
I just bought a Google cardboard vr headset and the honor 8 doesn't seem to work with it. It happens in the YouTube 360 videos too, when you try to set it to cardboard.
Does anyone else have this problem? I'm on the nougat beta, 320.
Thanks!
What kind of problem to you have ? I have the xiaomi vr headset and I can watch 360 YT videos without any problem.
You had the same issue on MM?!
CronaMell said:
You had the same issue on MM?!
Click to expand...
Click to collapse
I went to the nougat beta right when i got the phone so didn't check it on marshmallow.
The two video screens keep on jittering/shaking very fast like the calibration for gyroscope is off.
Thanks for the help! So it's either my phone or an issue with the beta update then!
JJustin said:
I went to the nougat beta right when i got the phone so didn't check it on marshmallow.
The two video screens keep on jittering/shaking very fast like the calibration for gyroscope is off.
Thanks for the help! So it's either my phone or an issue with the beta update then!
Click to expand...
Click to collapse
It's probably a problem with the Nougat Beta, as it's not a fully working model. I'd recommend reverting back to Marshmallow and your device should work with Google Cardboard again.
JJustin said:
I went to the nougat beta right when i got the phone so didn't check it on marshmallow.
The two video screens keep on jittering/shaking very fast like the calibration for gyroscope is off.
Thanks for the help! So it's either my phone or an issue with the beta update then!
Click to expand...
Click to collapse
Probably, just wait for an OTA and retry
I have the same problem but, not in beta, on Nougat.
Like this topic https://forum.xda-developers.com/honor-8/help/honor-8-emui-5-android-7-0-gyroscope-t3562562
Other in this case ?
I'm still having this same problem on official nougat after a factory reset. Didn't have it on marshmallow.
I think some P9 owners are having the same issue.
Same issues here..
Never had an issue. Just used a generic VR headset.
adriansticoid said:
Never had an issue. Just used a generic VR headset.
Click to expand...
Click to collapse
I have cheap Quality domo vr headset , but it showed some better results over what others posted
Issues with Google cardboard
JJustin said:
I just bought a Google cardboard vr headset and the honor 8 doesn't seem to work with it. It happens in the YouTube 360 videos too, when you try to set it to cardboard.
Does anyone else have this problem? I'm on the nougat beta, 320.
Thanks!
Click to expand...
Click to collapse
Yes there is is problem with some of the phones. They seem to have got crappy circuts. Almost no VR app is working with my phone, and when you call support, they say we cannot take responsibility for one app. That is Google cardboard. And all of the thousands of apps that are in the. This is not a great support, in fact no support at all. My next phone will be a Samsung, they all work with cardboard. This one does not.
/Ulf
Hey guys
Android Wear 2.8 update brings black theme to HW2.
I've just updated and it's nice.
biohaz55 said:
Hey guys
Android Wear 2.8 update brings black theme to HW2.
I've just updated and it's nice.
Click to expand...
Click to collapse
I have the update but can't remember actually the watch actually doing the update? Does it update when the wear app updates?
matthewgwilt said:
I have the update but can't remember actually the watch actually doing the update? Does it update when the wear app updates?
Click to expand...
Click to collapse
The watch app will update eventually once the phone app has updated.
neither my phone nor the watch show the update in playstore...I tried to download and intall the 2.8 apk from apkmirror on my phone but still the watch hasent been updated and nothing has changed...
any ideas?!
Kianush said:
neither my phone nor the watch show the update in playstore...I tried to download and intall the 2.8 apk from apkmirror on my phone but still the watch hasent been updated and nothing has changed...
any ideas?!
Click to expand...
Click to collapse
Have you definitely checked the android wear version in the watch settings in System, About, Versions?
matthewgwilt said:
Have you definitely checked the android wear version in the watch settings in System, About, Versions?
Click to expand...
Click to collapse
yeah its still the old version and the worse part is that in play store its also the same old version
I was really deciding to sell this and buy a gear s3 frontier untill I saw this new ball black update...
(man, only if that circle bezzle could rotate...)
also please tell me what version is the android wear app on phone?! because I heard it would be 2.7 on phone nd 2.8 on watch
Kianush said:
yeah its still the old version and the worse part is that in play store its also the same old version
I was really deciding to sell this and buy a gear s3 frontier untill I saw this new ball black update...
(man, only if that circle bezzle could rotate...)
also please tell me what version is the android wear app on phone?! because I heard it would be 2.7 on phone nd 2.8 on watch
Click to expand...
Click to collapse
I have version 2.8 on phone and watch. Maybe don't worry about what version you have... It will update real soon if your not on the latest update, there is nothing wrong with your watch mate
Go to Playstore ON Watch. You will find an update for "Android Wear", and it update the watch to 2.8
dersie said:
Go to Playstore ON Watch. You will find an update for "Android Wear", and it update the watch to 2.8
Click to expand...
Click to collapse
As i said before, there is no updtae available, maybe its regional and will be available later
Same situation here. We'll have to be patient as you said...
No update yet in Sydney Australia :crying:
Just to let you know guys... This isn't the Oreo update. This is just a minor update that just seems to take advantage of amoled screens. After the update my watch is still running 7.1.1
so i am in Germany, and still not received the 2.8 update.
i searched for it in Play Store .. nothing (watch & phone).
I have searched for it on "apkmirror" found it, installed it on the phone.
so far so good....but the Watch wont update to the 2.8 Version...I don't understand.
i will have to wait
flopyro said:
so i am in Germany, and still not received the 2.8 update.
i searched for it in Play Store .. nothing (watch & phone).
I have searched for it on "apkmirror" found it, installed it on the phone.
so far so good....but the Watch wont update to the 2.8 Version...I don't understand.
i will have to wait
Click to expand...
Click to collapse
Yeah, it's somehow annoying, considering all the hype and still Google rolls it out fast as a giant snail, I mean I understand that not everyone can receive it the same time but it was announced 5 days ago and there're still not to much wearables around, one might think that Google easily provides this update in a short period of time...
TL;DR
Yup, no AW 2.8 update in Germany
- store shows only AW 2.7
Edit:
For everyone who still hasn't got the AW 2.8 update (like me in Germany) just download the apk for the watch from here:
https://www.apkmirror.com/apk/googl...id-wear-2-8-0-182596874-android-apk-download/
And use "adb install -r" this will update the app without losing your settings worked just fine - the apk for the phone can be found here...
https://www.apkmirror.com/apk/googl...-182413461-gms-android-apk-download/download/
Finally, just received 2.8. It automatically downloaded on to my HW2 without me even noticing. Sydney Australia has now caught up with the rest of the world :laugh:
I can confirm that Android Wear 2.8.0.183 came up on my phone and watch today, Just downloaded and the black theme is great!
Im in Iran
Got the update today. I live in Sweden. I really like this new look
UK have update.
Hi git my update last week.
gadjet said:
Hi git my update last week.
Click to expand...
Click to collapse
Again, you received an Android Wear update. Your OS version will still be 7.1.1.
cornelha said:
Again, you received an Android Wear update. Your OS version will still be 7.1.1.
Click to expand...
Click to collapse
we all know that my friend, no need to mention it again, its already been mentioned and also the topic says android wear 2.8...
https://www.androidpolice.com/2018/03/28/wear-os-developer-preview-android-p-announced-now-available-huawei-watch-2/
Already flashing
LTE missed out once again! But hopefully the next preview comes for LTE since their are connectivity features in the preview.
Love to here you feedback on this!
i flashed it, the wear os app connects ok, but the Huawei wear app just says connecting and never connects, anyone seeing the same?
ramb02000 said:
i flashed it, the wear os app connects ok, but the Huawei wear app just says connecting and never connects, anyone seeing the same?
Click to expand...
Click to collapse
I believe that Huawei wear app needs to be updated to Android P support, I am using Android P on my pixel phone and the Huawei app crashes on it.
Alaadragonfire said:
I believe that Huawei wear app needs to be updated to Android P support, I am using Android P on my pixel phone and the Huawei app crashes on it.
Click to expand...
Click to collapse
I'm running Android P on my pixel 2 xl and like you Huawei Wear (keeps asking for Bluetooth permission even though it's on and it has it) and Huawei health crashes whenever it's open. I sent a crash report to Huawei and also email them about android p support. Might be worth while doing the same
---------- Post added at 11:26 AM ---------- Previous post was at 11:24 AM ----------
I find it alittle surprising that this watch gets the Android P update and the Huawei applications don't get an immediate up. Surely google and Huawei are working together on this. But it sounds like maybe they aren't. There could well be an API issue between Android P on the watch and the mobile apps. Keep us posted, hopefully there are mobile app updates coming soon
it actually the other way around, my phone is running Oreo (Galaxy S8) and the Huawei opens and loads fine, but it cannot connect to my Huawei watch 2 which is now running the dev preview 1 (P).. the wear os sees it fine though..
Alaadragonfire said:
I believe that Huawei wear app needs to be updated to Android P support, I am using Android P on my pixel phone and the Huawei app crashes on it.
Click to expand...
Click to collapse
ramb02000 said:
it actually the other way around, my phone is running Oreo (Galaxy S8) and the Huawei opens and loads fine, but it cannot connect to my Huawei watch 2 which is now running the dev preview 1 (P).. the wear os sees it fine though..
Click to expand...
Click to collapse
Maybe I wasn't clear, I have Android P on both my phone and my watch, the watch and phone connects fine for wear os app but not Huawei apps.
Does the watch mode work for anyone ? I tried couple of times to trun it on, but the watch acts as off afterwards and I had to restart it.
Hey guys,
Did anyone get Huawei Health working on the preview? Just installed the preview and found out that the health app isn't included!
Thanks up front
Android pie on Huawei watch 2 Lte
The Huawei watch 2 Lte LL roll out to Android pie
lewis1982 said:
The Huawei watch 2 Lte LL roll out to Android pie
Click to expand...
Click to collapse
Is that a question? Or do you have information? Please elaborate
Question
What about if I install the dp2 Android p on Huawei watch 2 Lte? Do you know?
mrlb said:
LTE missed out once again! But hopefully the next preview comes for LTE since their are connectivity features in the preview.
Love to here you feedback on this!
Click to expand...
Click to collapse
if I install the dp2 Android p on Huawei watch 2 Lte? Do you know?
Dp2 Android p
mrlb said:
LTE missed out once again! But hopefully the next preview comes for LTE since their are connectivity features in the preview.
Love to here you feedback on this!
Click to expand...
Click to collapse
Can't text dp2 on Huawei watch 2 Lte?
Very laggy. Plus Google Pay does not work.
I've not updated, but just to let you know u no longer need Huawei Wear if you have Huawei Health installed. Both apps were merged so just need Health now
Can anyone provide ota file for dp2?
Google has only dp1 for download.
thx
Doenerbude said:
Can anyone provide ota file for dp2?
Google has only dp1 for download.
thx
Click to expand...
Click to collapse
I think the factory image for dp2 is on the page?
https://developer.android.com/wear/releases/wear-preview-downloads#set_up_a_watch
Note the build date 180422 is after the dp1 release date and before the dp2 announcement 8th May. I could be wrong..
what is the latest wear os version on huawei watch 2. mine is showing 1.6 is this the latest version?
It just showed up!
Got it on my device too. My app drawer was in dark mode post-install, but swiftly went back to default, which I found strange seeing as I can't find anything relating to dark mode outside of the Poco Launcher settings, which do not effect the app drawer.
hope the battery isnt as bad as the previous updates!!
Is it streaming HD content on Hotstar and Netflix? Someone please try as I'm on the beta.
hrizuwan12 said:
Is it streaming HD content on Hotstar and Netflix? Someone please try as I'm on the beta.
Click to expand...
Click to collapse
it should but if i'm not wrong you will need to have locked the bootloader
eLaDiio said:
it should but if i'm not wrong you will need to have locked the bootloader
Click to expand...
Click to collapse
My bootloader is locked. I am able to stream HD contents on Amazon Prime but not on Hotstar or Netflix. I am on the beta version so I thought they still have works to do . But as they have released it in stable so I thought it should stream Hd contents on Hotstar and Netflix too. Someone check it out and report. Thanks?
hrizuwan12 said:
My bootloader is locked. I am able to stream HD contents on Amazon Prime but not on Hotstar or Netflix. I am on the beta version so I thought they still have works to do . But as they have released it in stable so I thought it should stream Hd contents on Hotstar and Netflix too. Someone check it out and report. Thanks
Click to expand...
Click to collapse
I don't think Netflix has yet to whitelist the POCO F1. The poco team said they are making progress with them and the HD content will come soon, so maybe after the positive feedback from Netflix they rolled it out. (not sure for Hotstar though...) I'm sure when its officially confirmed and tested + working by the team, they will make a huge announcement that you can watch your HD netflix !
bankaimaster999 said:
I don't think Netflix has yet to whitelist the POCO F1. The poco team said they are making progress with them and the HD content will come soon, so maybe after the positive feedback from Netflix they rolled it out. (not sure for Hotstar though...) I'm sure when its officially confirmed and tested + working by the team, they will make a huge announcement that you can watch your HD netflix !
Click to expand...
Click to collapse
No HD streaming for Hotstar and Netflix yet. Confirmed. I checked. Seems like we have to wait more. ? Anyways the team does an amazing job let's keep supporting ?.
DRM info app still show L3 for me!
jazzzzzzz said:
DRM info app still show L3 for me!
Click to expand...
Click to collapse
Same for mee
There's no need to clutter the forum with repeated topics.
Regarding this you may continue here:
https://forum.xda-developers.com/po...-f1-unlock-bootloader-custom-t3839405/page453
Thanks.
Lupin The Third
So a new release is out! Anyone try it yet?
Change log: https://del.dog/statix4-changelog.txt
Download: https://sourceforge.net/projects/statixos/
Let me know if you install and how Google Chrome now works!
Neat brother, thanks for the heads up !
Do they force us to use Gapps, or is there a google free version as well for those who don't want the malware ?
Gapps is included. Don't think they have a non Gapps version. I am on Lineage at the moment as I could not get Google Chrome to work on the 4.0 version of this ROM and had issues getting cdDroid running. I would like to get on 11 but I need a stable ROM for my daily driver.
SirDigitalKnight said:
So a new release is out! Anyone try it yet?
Change log: https://del.dog/statix4-changelog.txt
Download: https://sourceforge.net/projects/statixos/
Let me know if you install and how Google Chrome now works!
Click to expand...
Click to collapse
Chrome is working, but there's issue with in call audio. Don't use this version, they're fixing it.
Thank you for the update. Will hold off for the next release.
chanh2018 said:
Chrome is working, but there's issue with in call audio. Don't use this version, they're fixing it.
Click to expand...
Click to collapse
What's the bug? I'm using It for two hours and it seems pretty stable (ok, I haven't still test any call).
Darkside1984 said:
What's the bug? I'm using It for two hours and it seems pretty stable (ok, I haven't still test any call).
Click to expand...
Click to collapse
There's no in or out audio when you call or receive a call with the Phone app, even if connected through a Bluetooth device (car or headphone).
Besides that, this new official ROM is very good.
I'm really surprised of its stability... Is it feasible to use Nuclear version until the bug is fixed?
SELinux Is enforcing or still permissive?
ZeroAlee said:
SELinux Is enforcing or still permissive?
Click to expand...
Click to collapse
Enforcing
SirDigitalKnight said:
So a new release is out! Anyone try it yet?
...
Let me know if you install and how Google Chrome now works!
Click to expand...
Click to collapse
chanh2018 said:
Chrome is working, but there's issue with in call audio. Don't use this version, they're fixing it.
Click to expand...
Click to collapse
Latest Chrome, Brave and Brave Beta are suffering of sudden freezes, at least on my PH-1. Are there other users having this same issue?
aamadorj said:
Latest Chrome, Brave and Brave Beta are suffering of sudden freezes, at least on my PH-1. Are there other users having this same issue?
Click to expand...
Click to collapse
On 4.0, Chrome would just freeze at 60 seconds on the dot. Not sure if that is what yours is doing but if so then they still have not fixed it on 4.1 :-(
SirDigitalKnight said:
On 4.0, Chrome would just freeze at 60 seconds on the dot. Not sure if that is what yours is doing but if so then they still have not fixed it on 4.1 :-(
Click to expand...
Click to collapse
hmm...that's weird. Mine is working fine, I'm using Chrome and browsing for 10 mins without any issue. Maybe built hardware difference? I bought mine from Amazon (Halo gray) unlocked version few years back.
chanh2018 said:
hmm...that's weird. Mine is working fine, I'm using Chrome and browsing for 10 mins without any issue. Maybe built hardware difference? I bought mine from Amazon (Halo gray) unlocked version few years back.
Click to expand...
Click to collapse
exact same for me, even the same color But I have not loaded 4.1 yet to test to see if it works on it. Did you have issues with 4.0?
chanh2018 said:
hmm...that's weird. Mine is working fine, I'm using Chrome and browsing for 10 mins without any issue. Maybe built hardware difference? I bought mine from Amazon (Halo gray) unlocked version few years back.
Click to expand...
Click to collapse
SirDigitalKnight said:
exact same for me, even the same color But I have not loaded 4.1 yet to test to see if it works on it. Did you have issues with 4.0?
Click to expand...
Click to collapse
Maybe is worth to mention I had to install QQ1A.200105.007 firmware (January 2020) to be able to use TWRP to flash StatiXOS 4.1. Before, my device was using last Essential official build (February 2020) but with this firmware TWRP didn't work, as reported at many threads.
I know StatiXOS 4.1 is using its own vendor, but I guess the firmware goes beyond the vendor and there could be some leftovers.
SirDigitalKnight said:
exact same for me, even the same color But I have not loaded 4.1 yet to test to see if it works on it. Did you have issues with 4.0?
Click to expand...
Click to collapse
Nope, I just didn't use 4.0 because of something else. My IMS was not registered and so no VoLTE available.
chanh2018 said:
Nope, I just didn't use 4.0 because of something else. My IMS was not registered and so no VoLTE available.
Click to expand...
Click to collapse
Well then I am glad that they fixed the Chrome issue in 4.1. Once the in-call audio I will give it another try.
Hope next version will be better. Many thanks!
I don't know if it's related to the ROM or the Android version but I can't get the Amazon apps to work (Amazon and Amazon Prime Video).
Darkside1984 said:
I don't know if it's related to the ROM or the Android version but I can't get the Amazon apps to work (Amazon and Amazon Prime Video).
Click to expand...
Click to collapse
I'm in Australia and I have no problem using Prime Video on StatiXOS 4.1