Hi, i have S7 with 8.0 updated original .
When i had the previous version of android 7.x , no problem with google assistance.
Now with 8.0 i have so much problem:
-Google assistance with wifi home work perfectly , very speed, no problem.
-When i use it on car many times not work. hear what is dictated, but before what is dictated appears on the screen is a long time, then it goes into timeout and only then everything appears on video written.
I use it for write messages automatically by dictating them.
Once it has gone into timeout, it goes back to working and writing automatically for a few minutes, then the problem returns again
I have also search on google a fix but not resolve.
This is not a problem of bluetooth (bluetooth and car) , i have the same problem with bluetooth off.
It seems like a connection problem, as if it were timeout and before connecting again takes a long time to reach the server, once connected then it works
I have no root and i can't do it because is a work phone.
thanks
Hi
Im so sorry.i think perhap you need wipe full data.and reset your phone.then you need update all apps.
Related
I was hoping that CM13.0 would solve my Bluetooth problem but did not.
Although most of the time is working with a factory Bluetooth system (in a MB car) every now and then it disconnects.
Disconnection usually happens when there is an incoming call - before I press the accept call button, phone disconnects and reconnects a second or so latter.
I had this problem with CM12.1 and I was hoping CM13 would fix it - only in CM12.0 it was working fine.
Rare times it disconnects while idle – or it happens often and it goes unnoticed.
Is there any solution I missed?
Things like complete factory reset / clearing cash etc are done with no change in the results.
Car has no update (it’s an Alpine NTG2.5 system).
papars said:
I was hoping that CM13.0 would solve my Bluetooth problem but did not.
Although most of the time is working with a factory Bluetooth system (in a MB car) every now and then it disconnects.
Disconnection usually happens when there is an incoming call - before I press the accept call button, phone disconnects and reconnects a second or so latter.
I had this problem with CM12.1 and I was hoping CM13 would fix it - only in CM12.0 it was working fine.
Rare times it disconnects while idle – or it happens often and it goes unnoticed.
Is there any solution I missed?
Things like complete factory reset / clearing cash etc are done with no change in the results.
Car has no update (it’s an Alpine NTG2.5 system).
Click to expand...
Click to collapse
Sadly, this is a wide problem with a lot of Android phones.
One of the fixes Ive read around is to not give so many permissions when pairing a Android device. Example I read: Someone's device would never connect if they shared contacts with their car. You can share contacts and have the hands free not working or not share any contacts and have handsfree working. Its a trade off.
So far CM13 seems little better.
What I can't figure out is the pattern, if there is one. Why sometime it works and sometimes is not. When I initiate the call from the phone or the car keypad, 99% it will work without a problem.
When I receive a call, its a hit or miss. Sometimes it works, sometimes it doesn't. The only reason the phone is not landed out of the window is the fact that reconnection is quick, so I get to answer the call from BT no matter what. But is frustrating.
I remember my first phone with this car was a (non smartphone) nokia. In that case from BT I could hear the selected phone ringtone and the phone did not ring at all.
With any smartphone from then on, both the phone rings (with its own ringtone) and the BT rings with a generic tone. Oh well ...
BTW I had zero problem with BT when I first bought OPO - but then it had CM12.0 I think.
Hello! Long-time lurker, first time poster.
I have a sudden problem with my Android phone (Samsung Galaxy S6 running Android 7.0). Hopefully you bright gentlemen and gentle-ladies can help me:
Approximately 1 week ago, my phone stopped transmitting Voice data on phone calls. I cannot hear what the other user says on their phone, and they cannot hear me, however, pressing number keys DOES transmit the dial-tone to the other user (both ways). It does not matter if I call them or if they call me. It does not matter where I am physically, I have tried in several locations around the city (likely on several towers). It does not matter if they are using a mobile or land-line.
During this time, all of my data connections work fine. Texts, Email and Browsing is unaffected. Phone performance is normal.
Since this has occurred, I have:
- Simulated battery disconnect
- Wiped Cache Partition
- Force-stopped the Phone app (all three instances)
- Verified the physical Microphone is working using the Voice Recorder app (it works fine)
- Booted the phone in Safe Mode
- Contacted my service provider to check in there was any problems with my account or transmissions.
- Transferred my Sim card to another device to test if my card/connection was ok. (Voice worked 100% on the secondary device)
- And lastly today; Completed a Factory Reset
I am sitting here now trying to understand how a hardware problem could possibly cause a failure of Voice encoding on only one app, and how to fix it. Or how a software problem survived the Factory Reset into the (semi-)fresh install.
Any suggestions?
I recall one fixing another phone that had a problem with its Capacitive Touch Screen being not sensitive enough/not reading presses problem by accessing a special menu that allowed me to re-download the driver. Is there anything like that for the Voice?
Thanks!
Ack, only 10 views and buried on page 3 already. Chances of resolution seem low...
(Duplicated from previous post as per suggestion by admin. See here: https://forum.xda-developers.com/general/help/voice-transmission-phone-calls-t3690651 See Addendum notes)
Hello! Long-time lurker, first time poster.
I have a sudden problem with my Android phone (Samsung Galaxy S6 running Android 7.0). Hopefully you bright gentlemen and gentle-ladies can help me:
Approximately 1 week ago (edit: 3 weeks ago), my phone stopped transmitting Voice data on phone calls. I cannot hear what the other user says on their phone, and they cannot hear me, however, pressing number keys DOES transmit the dial-tone to the other user (both ways). It does not matter if I call them or if they call me. It does not matter where I am physically, I have tried in several locations around the city (likely on several towers). It does not matter if they are using a mobile or land-line. (Addendum: Hangouts dialer functions perfectly with the hardware, before and after factory reset(s), Bluetooth headset works with Hangouts but not regular Phone)
During this time, all of my data connections work fine. Texts, Email and Browsing is unaffected. Phone performance is normal.
Since this has occurred, I have:
- Simulated battery disconnect
- Wiped Cache Partition
- Force-stopped the Phone app (all three instances)
- Verified the physical Microphone is working using the Voice Recorder app (it works fine)
- Booted the phone in Safe Mode
- Contacted my service provider to check in there was any problems with my account or transmissions.
- Transferred my Sim card to another device to test if my card/connection was ok. (Voice worked 100% on the secondary device)
- And lastly today (two weeks ago); Completed a Factory Reset
(Addendum:
- Flashed stock firmware from Sammobile via Odin
- Attempted to clean out the Microphones with toothpicks and blunt metal objects, just to be sure
- Plugged in and removed a wired headset as well as checking for debris)
I am sitting here now trying to understand how a hardware problem could possibly cause a failure of Voice encoding on only one app, and how to fix it. Or how a software problem survived the Factory Reset (and Firmware flash) into the fresh install. I did indeed try without any 3rd party apps being installed, without even adding my Google or Samsung accounts to the phone, just plain old Android; no dice.
Any suggestions?
I recall one fixing another phone that had a problem with its Capacitive Touch Screen being not sensitive enough/not reading presses problem by accessing a special menu that allowed me to re-download the driver. Is there anything like that for the Voice? (Addendum - I have looked at all the star ** codes available for this model and tried several, nothing has worked so far)
Thanks!
Thoughts today (Oct 31/17): I am not sure that flashing a custom rom is really what may fix the phone. I am willing to do so, but it is somewhat frowned upon by Canadian carriers (or at least it used to be). I was curious if it was a problem with Noise Cancellation or an SD Card problem as those are issues brought up when googling the issue. My current plan is to flash to a stock Android 6.0.1 and see if the phone works then. If so, then try the standard upgrade path. Any suggestions will be helpful!
Any help with this issue would be very appreciated! I've had this from the very beginning where after the device goes to sleep, then wakes again the bluetooth devices disappear from the paired list, plus it won't find anything when you search. After you hard reboot it works perfectly again until you next put it to sleep. This means the OBDII won't connect in Torque, phone won't connect etc until you reboot every time you get in the car which is major pain.
- I've tried replacing the bluetooth module with a USB and physically removing the onboard one.
- Replacing MTCManager with a version that doesn't kill any services/apps during sleep
- Using the whitelist from Graser Dasaita's tool
- Tried multiple ROM's
Unfortunately I'm at the end of my Android knowledge so not sure what to try next. Seems like its some kind of service that gets killed? Weirdly it will sometimes for no apparent reason randomly reconnect when I'm driving along.
Please help!
Running PX5, Maylask Android 6.0.1 (ROM version 7.2)
I've since discovered the system service "bluetoothservice" gets killed which is probably causing my issue. How do you automatically start a service on wake? Any suggestions?
I had white listed "bluetooth com.microntek.bluetooth" but I also needed to white list bluetoothservice android.microntek.mtcservice still doesn't work though.
Removed
bjt2 said:
Removed
Click to expand...
Click to collapse
Hi !
What do you mean by removed?
I have a similar issue.
I must say i love the phone as in battery life and the camera also gives some nice pictures.
But what started it to not love the phone anymore is the notification problem.
I installed Whatsapp and as soon as the lockscreen was active or a few minutes later it stopped to receive notifications.
This also was for Telegram and my home automation app.
I have searched for topics and found quite allot of these similar notification problems with tips.
What i have done is set by every application that needed to be running in the background :
Enable autostart
Turn of battery saving mode - no limitation
Lock the app in the screen where you can empty / close the running apps.
Also found a topic and application that should "fix" some notification problems for MIUI.
https://github.com/FabioCZ
Not sure if this completly works but i am starting to get most notifications on whatsapp/telegram etc.
What does not work at all is my video doorbell,
the application is Hik-Connect.
Got my older samsung phone laying next to the note 10 and press the ring button.
Only samsung rings, the note 10 doesn't work at all.
ofcourse i have installed them both from the playstore, used the same settings on the xiaomi to keep it running.
Nothing
Is there anyone that has an idea, because the whole handy thingy is gone now.
maybe a custrom rom will solve it,but since i have no idea how to make it thats a no go
I did unlocked the phone , installed orange fox and magisk to use titanium backup.
Can say that this didn't work flawless also, getting magisk giving the toast message to give certain apps root acces etc etc.
whats even worse, can't return the phones ( got 2, 1 for me and for m girlfriend)
Well hope someone has an idea.
Thanks
edit: i am using nightskeeper to automatically turn of the sound at a certain time and turn it on.
Give some contacts rights to still call trough the audio block.
But also this application does not work anymore, i get this notice every time but its already active.
When i enter ok, and turn the permissions on it works again for a few hours or so and then its gone.
its getting a bit frustrating , hopefully my alarm clock will still stay working
try this setting
Sylar82 said:
try this setting
Click to expand...
Click to collapse
try to put a system sound, the same thing happens when I put an mp3 or music sound
thanks guys,
the sound trick was indeed a good one because it could not find the audio file that was set from my samsung phone ( used titanium backup to install WA again)
It does seem that 9 of 10 times i do get the notices.
Also got my Hik-Connect app finally running and ringing when i press the doorbell.
Now comes the strangest part, the settings that i have put in my phone are identical to the phone of my girlfriend.
And my phone works with most of the services that i want but the phone from my girl doesn't.
Also bumped into another thing, wifi tethering .
I have a android radio in my car, what i got set with Tasker for years is :
1 - jump in the car
2- bluetooth makes a connection to the radio/phone .
3- tasker notices this, starts wifi tethering / hotspot
4- radio will connect on the hotspot of the phone and live traffic naviation / streaming radio works.
That was how it was supposed to work, now i get a notice from tasker that its not working, need a extra application and root.
I have root / installed the wifi tasker tether application. Also found the module that should do the same and installed this in magisk.
But still a no go
i do like fiddeling around with my phones, but it has to work eventually haha.
Would come in handy if i know how to write code and make my own fix for this.
Ah well anyway, im going to make a full backup from my phone and try to set this 1:1 on my girls phone.
Hopefully the notifications and the doorbell will work then.
Thanks guys
Im using notifybuddy for notifications and it's a life changer.
Hello Vincenttot, I have bought a PocoX3 PRO mobile and the same thing happens to you.
What does not work at all is my video doorbell, the application is Hik-Connect. But on other phones it works fine.
Have you found any solution?
Thanks guys