I had a faulty digitizer/lcd display and replaced both yesterday. When I first booted up the phone, I was disappointed because I couldn't even unlock the phone. After a few swipes, it unlocked and I checked if my touch screen problems went away. It looked like they did, but every time I tried to unlock my phone, it would still take multiple tries for it to recognize my touch. Very annoying, especially if I get a call. By the time I would get it to recognize my touch the caller would be sent to voicemail, so I tried different lock types but they all had the same problem. The simple solution was to disable the lock screen altogether, but I didn't want my screen to accidentally keep turning on while it's in my pocket so I tried a different rom after backing up. After multiple attempts to install a different rom, I had to use the TMOUS RUU and get back to stock 4.0.3. I'm still having the same problem. I'm pretty sure it's nothing having to do with the digitizer/lcd since they are both brand new and all parts of the screen are responsive once I get past the unlock screen. Anyone else have this problem, and any solutions besides disabling the unlock screen?
where did u get the digitizer/lcd from i had that issue to when i bought a cheap digitiezer with lcd screen from ebay it was low quality.So i ended with buying another one and it worked with that one without issues did u check all connections ? that might be a problem or do u got a screen protector on it i heard about a lot of problems with them too
I don't wan't to discourage you, but when you change displays it's never the same as the original. You've didn't note, if you bought an original HTC Sensation display, but I doubt that it is. Anyway, the problem should be with the micro flat cable connection. I've had the same problem replacing my screen on Samsung Galaxy Ace. You should give it to someone that can try and connect the flat again, but really, don't get your hopes up.
dennis8 said:
where did u get the digitizer/lcd from i had that issue to when i bought a cheap digitiezer with lcd screen from ebay it was low quality.So i ended with buying another one and it worked with that one without issues did u check all connections ? that might be a problem or do u got a screen protector on it i heard about a lot of problems with them too
Click to expand...
Click to collapse
I got it from ebay, it's the one with the HTC logo in the middle and no T-Mobile logo, supposedly brand new and never used except to test if it works. I'll try re-installing it and see if that fixes it.
hey
here try this that might help
just found it and thought about that i answered u yesterday if thatll work i could saved my money hahahahaha might help u to save ur money
http://forum.xda-developers.com/showthread.php?t=1360638
Ok..
I had this phone for a while and I started using it again recently. I have fully replaced the digitizer/lcd bezel before with no problems (been a phone repair tech for 10 years) And it has worked fine.
The other night I reverted it back to stock because it seems to be the only way to get a constant data signal. Worked fine. I then updated it to the newest OTA update without a problem.
I then rebooted it and it stuck on a black screen loop with the buttons going on and off for hours. I spent 7 hours trying to figure out what was wrong, flashing, re flashing.. Nothing. Finally I get CWM recovery installed and find out my SD card is fried. So I put a new one in, and transfer over the roms I want t flash. 3 different roms, all with no touch screen.
Revert back to stock, still no touch screen.
Could something have gone bad on the board to have caused this? Is there something system wise not getting wiped that may cause this? Its to much of a coincidence that the touch screen and buttons would go out after all this happened.
Any help would be appreciated. Im waiting on a new digitizer now to check because Ive already gone over all the connections. But if its something software wise, Id like to try that before doing another digitizer replacement.
Thanks
funny you made this thread. i just got my hands on a soft bricked g2x that was stuck on the blue lg logo. after a quick nvflash it boots right up......but with no touchscreen. not sure if it ever worked as im not the original owner.
but i'll be keeping my eyes out on this thread for sure!
Id give a pretty to see inside both of your phones. Sounds like a bad contact on the ribbons.or one of them may have been ripped during a screen installation. I've never heard of the screen just up and quoting working without some major stuff happening to the phone. My guess is these screens were replaced with the wrong screen.just a guess though.
Sent from my LG-P999
grantusmantus said:
Id give a pretty to see inside both of your phones. Sounds like a bad contact on the ribbons.or one of them may have been ripped during a screen installation. I've never heard of the screen just up and quoting working without some major stuff happening to the phone. My guess is these screens were replaced with the wrong screen.just a guess though.
Sent from my LG-P999
Click to expand...
Click to collapse
I have done phone repairs for quite a few years, It wasnt a wrong screen and has worked fine for a year since its replacement. I have already opened the phone again and made sure all contacts were fine. What Im trying to figure out is if there is maybe some part of the system/boot that holds the touchscreen drivers and they have bee erased?
Again, I find its a huge coincidence that it worked fine up until this happened then as soon as its booting again, stops working... Which is why I think its a software issue.
Try touching the corners of the screen after booting up start with the top left and go clockwise. One of the roms used to mess up the connectivity between phone and screen. And that is supposed to reset the touch screen. A old g1 trick
Sent from my SGH-T999 using xda premium
Hello XDA,
My Nexus 5 running CM12 5.0.2 nightly will not respond to the touches anymore infact when I press the power button to activate the display it acts as if someone is touching it randomly messing all the apps that are running and opening and closing many other things.
Furthermore it displays weird and burned lines throughout the screen. It was not dropped, no water went inside the device or anything. If it helps I did install the OTA updates that CM gives us.
I have also attached pictures so you may get a better understanding of my problem.
Thanks in advance.
Saad S. said:
Hello XDA,
My Nexus 5 running CM12 5.0.2 nightly will not respond to the touches anymore infact when I press the power button to activate the display it acts as if someone is touching it randomly messing all the apps that are running and opening and closing many other things.
Furthermore it displays weird and burned lines throughout the screen. It was not dropped, no water went inside the device or anything. If it helps I did install the OTA updates that CM gives us.
I have also attached pictures so you may get a better understanding of my problem.
Thanks in advance.
Click to expand...
Click to collapse
Has this happened after you flashed a rom or.. ??
semirr said:
Has this happened after you flashed a rom or.. ??
Click to expand...
Click to collapse
Yes after I flashed the rom but not directly after. But after a good 1 month.
Saad S. said:
Yes after I flashed the rom but not directly after. But after a good 1 month.
Click to expand...
Click to collapse
Hmm I see. Well since a month HAS passed, its definetly not the rom thats causing the problem, i don't know if anything regarding the software could even be causing the problem. Its 100% hardware and by that i mean the screen, you should change it, the touch and also the display are messed up.
semirr said:
Hmm I see. Well since a month HAS passed, its definetly not the rom thats causing the problem, i don't know if anything regarding the software could even be causing the problem. Its 100% hardware and by that i mean the screen, you should change it, the touch and also the display are messed up.
Click to expand...
Click to collapse
Is it possible that a driver update could fix this, if so then how?
Saad S. said:
Is it possible that a driver update could fix this, if so then how?
Click to expand...
Click to collapse
Hmm i dont think that a driver could be the problem. And if it is i dont know how you could fix it Google it
I hate to be the bringer of bad news - but your screen is toast. Fortunately you can replace the touch and display components all at once.
http://www.amazon.com/Skiliwah-Digitizer-Assembly-Google-nexus5/dp/B00HN0U168
Here is what you need to perform the repairs - and here are the procedures for disassembly.
https://www.ifixit.com/Teardown/Disassembling+Nexus+5+Display+Teardown+-+liquid+damage/32410
Trust me, it's not that difficult. Unfortunately, it's a bit pricey ($60 for the screen and digitizer), nevertheless much cheaper than a new device or sending your device in for repairs.
Rma
Problem Solved
The screen isn't toast, neither is the digitizer. I have 2 of these phones. The parts which cause problems like this are the main board and the ribbon with the USB connector on it, which also attaches the screen & digitizer to the main board. One was showing lines exactly like this, & also no touch. I put a replacement main board in. Works great now. The other, wouldn't even turn on. I put the main board from the first phone in the second one, it still wouldn't turn on. I replaced the ribbon cable, it turns on and perfectly replicates the issue from the first phone. So now, I have one fully functioning LG Nexus 5, and another which turns on with the same problem as yours. This is good, I started out with 2 of them that were useless to me. So, it appears that your display and touch issues are caused solely by a bad main board. A replacement main board costs somewhere around $75. After swapping stuff around, I have 2 bad main boards, 1 bad USB ribbon & 1 working phone of 2. Not bad, not bad at all.
Ok read the other posts but having touchscreen issues with the phone running Resurrection remix latest ROM. Only happened over last days and I cannot remember dropping it.
Its the middle part of the screen that sometimes do not respond.
Its 3 years old and has served me well but just wondering if there is any fix or is it time to upgrade?
funkyirishman said:
Ok read the other posts but having touchscreen issues with the phone running Resurrection remix latest ROM. Only happened over last days and I cannot remember dropping it.
Its the middle part of the screen that sometimes do not respond.
Its 3 years old and has served me well but just wondering if there is any fix or is it time to upgrade?
Click to expand...
Click to collapse
Tried changing rom?
same problem here, switched from RR to Lineage and then now Tugapower . did factory reset, system reset, media everything but no use still i see lot of screen freeze's n stuck at middle of something...
Was working fine and then suddenly the middle of the screen not responding?
Not sure if its a hardware issue as restored to a previous version and same issue.
Is there any fix?
Was working and then suddenly just stopped responding to the middle part of the screen. Resorted back to back up and same issue
Is this a hardware issue and is there any fix?
Anyone helped here or is the phone Fubarred?
As getting annoying. Was going to try a factory reset but not sure if it can be fixed by this. Is there any fix like replacing screen or is that cash down the drain?
cheers
funkyirishman said:
Anyone helped here or is the phone Fubarred?
As getting annoying. Was going to try a factory reset but not sure if it can be fixed by this. Is there any fix like replacing screen or is that cash down the drain?
cheers
Click to expand...
Click to collapse
You can always replace display.
Mr.Ak said:
You can always replace display.
Click to expand...
Click to collapse
thanks
thing is I dont want to waste spending euros if this wont fix it. The top and bottom of the screen work ok its just the middle and screen not cracked or anything but if I spend money on it and it does not fix it just a waste of Euros then. Before I do just want to check could it be any other issue?
funkyirishman said:
thanks
thing is I dont want to waste spending euros if this wont fix it. The top and bottom of the screen work ok its just the middle and screen not cracked or anything but if I spend money on it and it does not fix it just a waste of Euros then. Before I do just want to check could it be any other issue?
Click to expand...
Click to collapse
Seems like display issue only.
Mr.Ak said:
Seems like display issue only.
Click to expand...
Click to collapse
Thanks
Reading up I can see it maybe the digitizer also. So If the screen gets replaced does the digitizer get replaced with it, Tried to find out if they are connected?
funkyirishman said:
Thanks
Reading up I can see it maybe the digitizer also. So If the screen gets replaced does the digitizer get replaced with it, Tried to find out if they are connected?
Click to expand...
Click to collapse
They must be replaced in combo.Even if there's a way to separate them,it might not be the best idea.
funkyirishman said:
thanks
thing is I dont want to waste spending euros if this wont fix it. The top and bottom of the screen work ok its just the middle and screen not cracked or anything but if I spend money on it and it does not fix it just a waste of Euros then. Before I do just want to check could it be any other issue?
Click to expand...
Click to collapse
I registered just to respond to you and let you know that replacing the screen did not work for me.
I bough this phone online a few months back but gave up on it because it was literally unusable due to ghost touch inputs. I have since installed LineageOS and completely replaced the old screen and STILL get ghost inputs along the whole right edge of the phone.
Some people say it's due to an issue with the grounding of the screen. I've tried many solutions and the touches still seem random.
I noticed, that my 1+1 always works ok on stock roms (cm11,cm13 from this forum) and when i set up Android Oreo or Halogen (7.1.2 unoff) or even Flyme 6, my screen don't want to wake up from time to time, buttons vibrate, sound works, all works except screen. Even though, i noticed one way to wake it up, just repeat the touches some times, double tap to panel (i don't see it), and again, to block the screen... it wake up always, or reboot sometimes, but this is not a variant to use at real situations. somtimes headphones help, sometimes usb cable, but no 100% solution.
may be someone know how to solve this problem? i saw a lot of messages here about SOD, and no solution. just something about a modem or flash stock, but this is a software trouble, may be it is firmware.zip or just one .bin file inside (power management). may be this error can be solved?
I really want to go to Oreo and today i tried to do it, but when I suddenly understood that it doesn't work again (after stock) i decided to go back, no way to use it. may be i should take some files from stock?
60puc said:
I noticed, that my 1+1 always works ok on stock roms (cm11,cm13 from this forum) and when i set up Android Oreo or Halogen (7.1.2 unoff) or even Flyme 6, my screen don't want to wake up from time to time, buttons vibrate, sound works, all works except screen. Even though, i noticed one way to wake it up, just repeat the touches some times, double tap to panel (i don't see it), and again, to block the screen... it wake up always, or reboot sometimes, but this is not a variant to use at real situations. somtimes headphones help, sometimes usb cable, but no 100% solution.
may be someone know how to solve this problem? i saw a lot of messages here about SOD, and no solution. just something about a modem or flash stock, but this is a software trouble, may be it is firmware.zip or just one .bin file inside (power management). may be this error can be solved?
I really want to go to Oreo and today i tried to do it, but when I suddenly understood that it doesn't work again (after stock) i decided to go back, no way to use it. may be i should take some files from stock?
Click to expand...
Click to collapse
This has happened to me before.What I simply did was replace the display.
Mr.Ak said:
This has happened to me before.What I simply did was replace the display.
Click to expand...
Click to collapse
that's the way, but not for me. i've just changed my display, i just can check old one, it is not broken, just a dead zone on the touchscreen. but it means that the revision is incorrect, it is something like a driver, i think. i already had the same situation with a old tablet, it didn't wake up anytime after boot, it was discussed at 4pda, so people found, that only one of the 3 revisions works ok at last firmware, i had 2 type of display and could to swith and check it. but it wasn't so good with colors, so i stayed at stock. it seems that situation is the same now.
60puc said:
that's the way, but not for me. i've just changed my display, i just can check old one, it is not broken, just a dead zone on the touchscreen. but it means that the revision is incorrect, it is something like a driver, i think. i already had the same situation with a old tablet, it didn't wake up anytime after boot, it was discussed at 4pda, so people found, that only one of the 3 revisions works ok at last firmware, i had 2 type of display and could to swith and check it. but it wasn't so good with colors, so i stayed at stock. it seems that situation is the same now.
Click to expand...
Click to collapse
Nope,I'm pretty sure it's the display that you changed.Get a refund or replacement.
Mr.Ak said:
Nope,I'm pretty sure it's the display that you changed.Get a refund or replacement.
Click to expand...
Click to collapse
Why do yoy think so? Stock fw can realize all functions for that display, why custom can't do it at the hardware level? no reason to think so.
Just only one idea - is a revision. Now i can try my old display. And if i'd manage to change touchscreen, that can be a solution. But i don't.
60puc said:
Why do yoy think so? Stock fw can realize all functions for that display, why custom can't do it at the hardware level? no reason to think so.
Just only one idea - is a revision. Now i can try my old display. And if i'd manage to change touchscreen, that can be a solution. But i don't.
Click to expand...
Click to collapse
As I already said,the same issue happened to me after I changed my display.I asked for replacement and replaced that damaged display,boom! I don't know what's so hard in it for you to understand.
Thank you for advice. I've just opened a dispute. Today it didn't woke up at stock firmware.
60puc said:
Thank you for advice. I've just opened a dispute. Today it didn't woke up at stock firmware.
Click to expand...
Click to collapse
Aliexpress?
Yes. But at first everything was ok. And when i installed oreo it stops some times and Sod started. I tried to use 7.1.2, it SOD's anyway. Then the stock was the solution. I'm already relaxed, and decided that it is software error, but after a few days it started again.
I've accepted this display, but with your help it's not so late to open a dispute. I think it will be ok.
60puc said:
Yes. But at first everything was ok. And when i installed oreo it stops some times and Sod started. I tried to use 7.1.2, it SOD's anyway. Then the stock was the solution. I'm already relaxed, and decided that it is software error, but after a few days it started again.
I've accepted this display, but with your help it's not so late to open a dispute. I think it will be ok.
Click to expand...
Click to collapse
Get ready with a lot of proofs tho'!
to me it happens, I do not know if it is the same as described, but unlocking the screen works everything but not touch, lock, unlock, and it works, what is it due?
Gab_echelon said:
to me it happens, I do not know if it is the same as described, but unlocking the screen works everything but not touch, lock, unlock, and it works, what is it due?
Click to expand...
Click to collapse
See previous page,I've already explained what is the cause of the issue.
I just finished replacing my screen, been waiting for my broken antenna cable and volume button flex to arrive. Everything works except the damn SOD i never had with my old screen. Tried turning off the proximity sensor check and still a no go. The screen turns on fine initially and trying to wake it instantly works all the time, but if I leave it off for any longer than 5 sec probably it won't respond to anything - power button, volume button, double tap and plugging in the usb cable connected to a power source.
Does this sound more like a governor issue? The rom installed is lineageOS (just updated to 10-30 release). Looking up my purchase log to open a dispute...
tested it again, repeated lock/unlocks puts it into the SOD state, doesn't even take 2 sec to do it...
oh wow, it does this even in the twrp recovery. I have wiped cache and dalvik cache just for the hell of it but doubt that was the real cause...
Gab_echelon said:
works everything but not touch
Click to expand...
Click to collapse
we've got a reverse situation. touch, buttons, sounds, modem works, but not screen (if you lock/unlock it 10-20 times it can raise again without reboot.
Buratei said:
it does this even in the twrp recovery.
Click to expand...
Click to collapse
i've got the first SOD in twrp mode. it doesn't matter, but at first - no troubles were with that. and now it works so so at home. and if i use it outdoor it becomes very often, but at home it seems that it works ok, just only seems, because if i want - i can do some manipulations (use camera, lock/unlock it etc) and the SOD appears again. but custom os executes SOD more frequently. i think it can be real overvoltage, like people says.
there are many posts here and everyone advices not effective solutions (flash stock, modem, fw ...) at first it helped me, but now i know there is no way, i can just try but ...
long time ago i owned an old tablet iconbit matrix - it has just the similar issue. it boots, but if you go to a sleep mode - it didn't wake up every time. it lights works ok inside, but no image. i had two displays and if i used one in a custom rom it worked ok, but not another one. stock rom works ok with every display. the solution was a display driver, like at windows OS.
cause of developers bugs, it was a little different (not stock-based) and some revisions of display works ok, others aren't.
so, i think it can be fixed, but the solution for me - change a display like the first reply says. Ali seller read this topic and posted me this in a few days after i started this topic:
Your dispute has been processed and the money will back to you in 7~10 working days.
so could you give us a positive feedback, please?
Best regards.
so, i'll order another one, no trouble, i hope this will help me to enjoy my oneplus.
60puc said:
so could you give us a positive feedback, please?
Best regards.
Click to expand...
Click to collapse
They always ask for positive feedback in exchange for refund/replacement.Bastards,aren't they? @evronetwork
For the sake of other people that'll read your feedback and make their decisions upon it,don't do it! Just complain this bribery to aliexpress staff ffs!
well I wish I bought from aliepxress... I bought mine from ebay to pinch some pennies, and because I was waiting on other replacement parts (which were only needed due to damage occurred during a screen replacement op) to ge here I am way over the protection period. aw shiiiiit, I guess you live and learn
gotta tell you though, the screen is a bit wacky in other ways too. the capacitive buttons do light up but not completely (kinda dark in the corners) and the colors look a bit off. hopefully the seller would honor the refund/return request...
EDIT: whoa... kinda hard to believe, but I messed around with battery profile just for the hell of it and by some pure luck discovered that the "performance" profile (second one from the far right) works just fine and wakes the screen every time. The "balanced" profile and everything below that gives me an insta-death. go figure!
EDIT2: guess I spoke too soon. it sure as hell looked like fixed, but it came back after a while. maybe it is just more sporadic than I thought...
No solution yet? I think, that it can be some trouble with lights (this wire with 3 contacts), because touch starts, but no image. may be the signal comes to the matrix, but it is not enough energy to enable this diods. what can we do? im going to change the back side of the screen.
ow, no way, don't even try, it has combined technology. i disasabled the whole wire, no chance there...
http://i102.fastpic.ru/big/2017/1215/50/bd4e28b5b320ad2b4de26baf9d809350.jpg
http://i103.fastpic.ru/big/2017/1215/28/9803686e8a12d29baa902c3a2577de28.jpg
60puc said:
No solution yet? I think, that it can be some trouble with lights (this wire with 3 contacts), because touch starts, but no image. may be the signal comes to the matrix, but it is not enough energy to enable this diods. what can we do? im going to change the back side of the screen.
ow, no way, don't even try, it has combined technology. i disasabled the whole wire, no chance there...
http://i102.fastpic.ru/big/2017/1215/50/bd4e28b5b320ad2b4de26baf9d809350.jpg
http://i103.fastpic.ru/big/2017/1215/28/9803686e8a12d29baa902c3a2577de28.jpg
Click to expand...
Click to collapse
What happened to getting a new display?
I use this one, because it works ok, but only at home. As a home tablet. At the street it fails every time.
I can reboot it if it doesn't wake up. But it wakes up often, so i don't want to order new one now. I want to check my mainboard to be sure, that it is dispaly problem
a bit late, but thought I should update on the situation... all working fine after a (yet another) LCD replacement. Much better color balance to boot, points to QC problems at the supplier's end. If I ever have to do this again, I am definitely going to inspect the new LCD as soon as I receive I receive it.