Database Info

Cyanogenmod update fails with error 7

Hello everybody, I hope to find help here.
My phone is the HTC One A9, Europe Version ("hiaeuhl"). Recovery is TWRP 3.0.2-0.
The background story is that I already managed to install Cyanogenmod after downgrading the original ROM to Version 1.10 and unlocked the bootloader with the HTC Unlock tool. I also managed to decrypt the device.
I'd like to update my system regularly, but unfortunately the last running version is the cm-13.0-20160904-NIGHTLY-hiaeuhl.zip from September 4th.
If I try to install the latest versions of Cyanogenmod (for example from September 9th) I always get the error
hiae.veryfy.trustzone() failed to read current TZ version: -2
Updater process ended with ERROR 7
I already tried to remove the lines that check this in the file updater_script inside the ROM's zip, then I could install the update, but afterwards I was stuck in a boot loop.
The error has nothing to do with the encryption, it apears with and without device encryption, and it has nothing to do which system (original or custom) is installed before flashing. It is also indifferent if I try the update via the system's update function or directly in TWRP. It's the fact that the Cyanogenmod version from September 4th is the last working for me. I definetly chose the right one for hiaeuhl, but it seems the developers have added a feature that makey my device incompatible to this ROM.
If there is anything I can do to update my system again, please let me know.

Have the same issue.
We need to update it, but I don't know how
jira.cyanogenmod.org/browse/NIGHTLIES-3351

Here is how I could solve the issue:
- flashing the latest stock firmware (and let it possibly completely update)
- install TWRP via fastboot
- from TWRP a factory reset
- install new version of the Cyanogenmod from TWRP
It worked for me, now I can use my beloved custom Rom

The Same Problem
I have exactly the same Problem, last working CM-Update was the 3rd September

Did you try my solution? With the older CM Rom versions for the HTC A9 you had to downgrade the stock rom, otherwise the CM wouldn't have started after the installation. Now it seems that the stock rom has to be the latest one (for me the 1.56) that you are able to flash the latest CM versions.

I do not have the latest stock Rom, my os is 1.27.161.6, seems actually cm needs 1.57, i am unlocked and s-off

You should probably find the right version for your phone here:
http://forum.xda-developers.com/one-a9/general/wip-ruu-htc-one-a9-t3240344
You should take the one with the right cid for your phone (which you can find with "fastboot getvar all" in the fastboot mode)

Thanks, i will try it and report

The last build i found for my version is 1.27. this is what i have

Hmmm... then I guess you have to wait until the new version appears in the forum. Seems that you have a device with vodafone branding. Since you already set S-off you also have the possibility to change your cid to one of the existing newer firmwares.

Is there a solution without going back to stock?

I'm not an expert, but I don't think so. It seems that the version number of the stock rom is stored somewhere even after changing the system to Cyanogenmod, and this version has to be the latest one. So unfortunately, as far as I know, you'll have to do the flashing procedure again...

thanks Silberhase, now i am on CM 13 again. Thats what i did: wrote Supdercid, searched a ruu-version for my build, found a 1.56.401.70 version, flashed this, then flashed twrp 3.0.2.0 again, factory reset - without factory reset i was not able to install cm, format data, recovery, latest cm update, flash gapps, restore my other data with titanium, done....

I'm glad to hear it worked for you!

Yes, but next Problem or better i actually do not know what problems will raise. After updating today successfully to last cm build phone is encrypted... TWRP requires password for decryption. Problem all over forums. Today i habe no fun to Format data again and restore all.

That's also what I experienced. Other users reported that the current TWRP version 3.0.2.0 can't handle the encryption of the HTC One A9. And every update will encrypt the device again. As a workaround you can do this:
- copy the downloaded update from /sdcard/cmupdater to the external memory card
- boot to the recovery (when asked for password push the cancel button) and install both the update and the gapps again (without wiping anything) from the memory card.

Its a pity, all worked perfectly. Installed last cm.. Which encrypted phone. Restored my backup. All Working. Updated apps, want backup again.... .... Error opening /system/addon.d (not a directory)..error in generating tarlist......Create tarfork()
Process Ended with error 255

I'm trying to help as much as I can even though I have no experience with all this. I never did a backup
Maybe you find the answer here:
http://forum.xda-developers.com/nexus-6/help/e-createtarfork-process-error255-t3302462
Maybe it helps to mount "system" in TWRP and then delete /system/addon.d. But it seems that this step has to be repeated before every backup.

Any news to this theme? Is Twrp able to handle A9 again in new Version?

The recent version 3.0.2.0 of TWRP is available for the A9 but can't handle it's encryption. It works anyway if you are willing to use some workarounds.

XT926 from 4.1.1 to LineageOS 14.1

I do not understand how to do what I want to do. I want to install the custom ROM LineageOS 14.1. Here's where I am stuck.
In trying to install the xt926/spyder 14.1 nightly build from 6.30.17 using ROM Manager, I get the following error message E3004: This package is for device: cdma_spyder; this device is xt926. It seems the error message states I am trying to install it on the wrong phone, so the install is aborted. But I do have an xt926 that I'm trying to install to. I posted on the Lineage site. I was told "don't use rom manager or clockworkmod they haven't been supported in years; also make sure you're using the latest TWRP for the correct device. The "this is device xxxx" is based on what the recovery says it is." I do not know which old TWRP I can use. In ROM Manager it states my current recovery is ClockworkMod 6.0.4.4. What's wrong with my recovery? The installer says I have an xt926, so why did it really fail? I'm wondering if I need the KKBL (KitKat bootloader), and the lack of that is why it really failed. If so, I do not understand from reading the posts how to get the KKBL. I read where I felt some were stating there was a small window to be able to get it and still root. I read about just flashing the BL, but then some said to never do that. Can someone please help me? TIA
Current -
OS: android 4.1.1 / 9.1.41xt926.verizon.en.us
Bootloader unlocked
Rooted
Baseband version: vanquish_bp_100700.210.64.05p
Kernel version: 3.0.31-g59a8475
System modifications: android 4.1.1 / 9.1.41xt926.verizon.en.us
Goal -
LineageOS 14.1 (Nougat)
Bootloader unlocked
Rooted

retalger said:
I do not understand how to do what I want to do. I want to install the custom ROM LineageOS 14.1. Here's where I am stuck.
In trying to install the xt926/spyder 14.1 nightly build from 6.30.17 using ROM Manager, I get the following error message E3004: This package is for device: cdma_spyder; this device is xt926. It seems the error message states I am trying to install it on the wrong phone, so the install is aborted. But I do have an xt926 that I'm trying to install to. I posted on the Lineage site. I was told "don't use rom manager or clockworkmod they haven't been supported in years; also make sure you're using the latest TWRP for the correct device. The "this is device xxxx" is based on what the recovery says it is." I do not know which old TWRP I can use. In ROM Manager it states my current recovery is ClockworkMod 6.0.4.4. What's wrong with my recovery? The installer says I have an xt926, so why did it really fail? I'm wondering if I need the KKBL (KitKat bootloader), and the lack of that is why it really failed. If so, I do not understand from reading the posts how to get the KKBL. I read where I felt some were stating there was a small window to be able to get it and still root. I read about just flashing the BL, but then some said to never do that. Can someone please help me? TIA
Current -
OS: android 4.1.1 / 9.1.41xt926.verizon.en.us
Bootloader unlocked
Rooted
Baseband version: vanquish_bp_100700.210.64.05p
Kernel version: 3.0.31-g59a8475
System modifications: android 4.1.1 / 9.1.41xt926.verizon.en.us
Goal -
LineageOS 14.1 (Nougat)
Bootloader unlocked
Rooted
Click to expand...
Click to collapse
The spyer is the old razor xt912 not the razor hd xt926 the xt926 is the vanquish. your flashing xt912 firmware on an xt926 device.

SOLVED
OGdroidster said:
The spyer is the old razor xt912 not the razor hd xt926 the xt926 is the vanquish. your flashing xt912 firmware on an xt926 device.
Click to expand...
Click to collapse
Oh! Thank you so much for the help.

retalger said:
Oh! Thank you so much for the help.
Click to expand...
Click to collapse
Sure your welcome

Has anyone managed to get Lineage OS 14.1 working on the xt926? I was able to flash it through TWRP along with opengapps 7.1 and it boots but either System UI or Setup is constantly crashing meaning i'm unable to proceed past setup.

drkdeath5000 said:
Has anyone managed to get Lineage OS 14.1 working on the xt926? I was able to flash it through TWRP along with opengapps 7.1 and it boots but either System UI or Setup is constantly crashing meaning i'm unable to proceed past setup.
Click to expand...
Click to collapse
To get 14.1 working you need to use RSDLite to flash back to 4.1.2 Jelly Bean (https://www.androidfilehost.com/?fid=24269982087011677), then install TWRP for the Photon Q (https://twrp.me/devices/motorolaphotonq.html) then use the official nightly builds for the Photon Q posted on the Lineage website. Open Gapps ARM 7.1 nano works best for me.
That said, you won't be able to use your main mic for phone calls, only speakerphone. I have yet to find a rom/recovery/firmware combination that will allow fully functional phone calls with anything above 4.4. This isn't a problem for me as this is a toy without a sim card in it, what some people call a toilet phone. It sits in my bathroom vanity and comes out when I forget one of my main devices. Other than that I play with it once every few months to see how far the development community has pushed it.

thunder2132 said:
To get 14.1 working you need to use RSDLite to flash back to 4.1.2 Jelly Bean (https://www.androidfilehost.com/?fid=24269982087011677), then install TWRP for the Photon Q (https://twrp.me/devices/motorolaphotonq.html) then use the official nightly builds for the Photon Q posted on the Lineage website. Open Gapps ARM 7.1 nano works best for me.
That said, you won't be able to use your main mic for phone calls, only speakerphone. I have yet to find a rom/recovery/firmware combination that will allow fully functional phone calls with anything above 4.4. This isn't a problem for me as this is a toy without a sim card in it, what some people call a toilet phone. It sits in my bathroom vanity and comes out when I forget one of my main devices. Other than that I play with it once every few months to see how far the development community has pushed it.
Click to expand...
Click to collapse
I tried this last weekend but was getting constant force closes from System UI so i gave up and went back to the MokeeOS build.

Thanks @thunder2132. After fumbling about, I finally got this working:
- In TWRP, wiped cache, data & system
- Reflashed 4.1.2 factory image
- I used fastboot manually and followed the recipe in the XML file. The gpt and tz images can't be downgraded, and I did not wipe userdata [not wiping this was probably a mistake])
- Rebooted to system with sim card
- Powered off
- Booted into bootloader/fastboot and flashed TWRP
- `fastboot reboot-bootloader` (in an attempt to keep the phone from trying to boot into system again)
- Booted into TWRP, flashed LOS & OpenGApps Nano
- Tried to reboot into system and failed
- Booted into TWRP, "Format Data"
- Rebooted into system, waited, profited
Now I'd like to figure out why I can only use ADB over the network. >:| It doesn't show up at all over USB, neither in LOS nor TWRP.
PS: Later I wiped system, reflashed LOS, and flashed OpenGApps *Pico*. No issues yet.

polyzen said:
Thanks @thunder2132. After fumbling about, I finally got this working:
- In TWRP, wiped cache, data & system
- Reflashed 4.1.2 factory image
- I used fastboot manually and followed the recipe in the XML file. The gpt and tz images can't be downgraded, and I did not wipe userdata [not wiping this was probably a mistake])
- Rebooted to system with sim card
- Powered off
- Booted into bootloader/fastboot and flashed TWRP
- `fastboot reboot-bootloader` (in an attempt to keep the phone from trying to boot into system again)
- Booted into TWRP, flashed LOS & OpenGApps Nano
- Tried to reboot into system and failed
- Booted into TWRP, "Format Data"
- Rebooted into system, waited, profited
Now I'd like to figure out why I can only use ADB over the network. >:| It doesn't show up at all over USB, neither in LOS nor TWRP.
PS: Later I wiped system, reflashed LOS, and flashed OpenGApps *Pico*. No issues yet.
Click to expand...
Click to collapse
Nice! I'm glad you got it working.

what do you mean with reflashed factory image 4.1.2?

I was on Resurrection Remix for the Razr M and now flashed LOS from this thread because of connectivity problems and I hoped it is a problem of RR. But unfortunately I still just have Edge connection, no 3G or 4G. Does anyone know how to fix that? There were no problems under 4.1.
Edit: I went back to 4.1.2 and wanted to start from zero but now on 4.1.2 there's only Edge connection as well :/

Keep getting error 7 on ROMs installation

I just got my z5 from the service centre.
I use this guide to root my phone as soon as I got it.
https://forum.xda-developers.com/xperia-z5/general/ftf-e66xx-patched-kernels-google-drive-t3630282
Then proceeded to install Resurrection remix and LineageOS.
First one gave me error 7 and the latter too.
I tried to delete the assert line in updater-script but the same problem persist.

You have to flash twrp 3.1.1 and everything will work without problem, so you are doing something wrong.

TWRP flash is already inside the guide. How would I say I get error 7 without installing TWRP?

That's kinda weird since I specifically deleted the line that checks for the device string for RR (only the AOSP / lineageOS based TWRP versions would match, so that check is kinda stupid),
in that case users need to know for sure that they have that specific device (e.g. NOT flashing Z5 compact to Z5) but the hassle is removed.
I believe I'm using the attached TWRP (it's 3.1.0 anyway),
and with that I could flash RR without problems

i will flash that TWRP again and try re-installing the ROM again

Still the same errorRIP

TWRP will not installan ROM that I give it on OP7 P

I have been trying unsucessfully tryiing to install Havoc OS on my phone for 2 days now and I believe the common theme seems to be TWRP.
I have tried to install different versions of Havoc, and then other Roms too and all fail in the same place.
There is no error code.
I have also tried to install different versions of TWRP going from 3.4.0.0 to 3.3.1.79 to 3.3.1.70 and none of these work
The steps are not complex and I have followed them to the letter
the bootloader is unlocked and magisk got installed although not needed for this part.
I also tried to install the rom via USB OTG and didnt work
please assist I am having so many issues with stock OS that i would like to try something else
TIA Bart

This can be closed I found it a much older version on the TWRP site itself and that actually allowed me to to flash the ROM

Question Bricked trying to install LineageOS

Hello,
I have a moto G100 I just purchased. I unlocked the bootloader and I tried to install LineageOS but it was being difficult. I could get it to boot into TWRP. Now I tried to restore everything to stock as it wasn't even booting. After flashing the rom back in via fastboot the unit shows up as a serial device but that's it, no picture on the screen or anything.
I need some help to get this working again. Besides the directions on the LineageOS page sucks, steps are missing and things do not work properly.
Any help would be appreciated.
This is Qualcomm HS-USB QDLoader 9008 mode and won't boot.
Can anyone please help so this won't take weeks or months?
Thanks

Hello,
I fixed the brick with the blankflash file blankflash_nio_RRTS31.Q1-84-24-3-6
I was able to then use the official tool to recover the firmware. I was able to get LineageOS working but I wasn't able to do TWRP at all properly.

So I managed to install twrp but couldn't install lineage or anything out of it...

I managed to get TWRP installed but it was essentially useless as I couldn't access the internal flash unless it was setup by the OS already if you format the internal flash storage with TWRP it's useless especially via MTP.
I was able to install LineageOS and I was able to boot it, but I don't understand why it says I do not have enough space to install gapps. Without gapps LineageOS is essentially useless as an OS unless you do not use anything from google at all whatsoever not eve maps or anything.
How do I fix it so I can install gapps? I can't resize the system partition via TWRP as it doesn't even show it.
Thanks

if you have the bootloader unlocked you can try the "tinyflashscript" way and use that to overwrite all partitions with a stock image found here
RET stands for Retail and than the region code follows, just download the latest one for your region
after that your partitions are reset to the start and you could keep it that way or attempt to install lineage again but clean this time
I ran into the exact same situation as you with the storage issues and this fixed it for me

Hello my G100 was fully hard bricked trying to installed LineageOS (not the modded). I followed the following steps:
1. Installed and booted into LineageOS recovery from electimon.
2. Factory reset
3. Install ROM as adb sideload.
However, installation stuck at 47% and aborted. Phone was hard bricked once turned off. It couldn't even boot into booloader.
Luckily, I was able to enter EDL mode by pressing and holding volume and power down together for some time while it was plugged into PC using usb. Then I used blankflash to restore. This saved me from taking it to repair centre.

Hello,
I had the same brick issue and blankflash fixed it for me. I will try writing stock again then install LOSRecovery again and then try sideloading both LineageOS and gapps but I don't think that will work correctly as I think I did try that but we shall see, last time I did an install though after fixing the brick issue I used fastboot to do the stock recovery which should have fixed the partition sizes...
Thanks

It's strange that device becomes hard bricked because I installed LineageOS before and it booted fine. Only thing now changed is that I'm using February stock ROM instead of December one. Did Motorola change anything in Feb update that would cause hard brick when trying to install custom ROM?
Also, I've never did the "Ensuring all firmware partitions are consistent" thing. It worked before but not sure if we need to do it now.

Hello,
Strange indeed I can get LineageOS installed BUT because this is an A/B phone which is so silly, I can't install Gapps into LineageOS so essentially useless as the installer says the partition is too small and I do not have a way to fix that at the moment.
Thanks, and blankflash was able to get me up and running on stock but I cannot use the phone yet just like the DooGee S95 Pro I bought in hopes to use LineageOS... long story. Stuck with my ZTE Axon 7 from 2016 and a crap phone to make calls since my provider killed service to my ZTE Axon 7 so I carry basically 3 phones now. Until there is a fully working TWRP I am essentially screwed and feel like I wasted $400 on another phone.

marcusah123 said:
Hello,
Strange indeed I can get LineageOS installed BUT because this is an A/B phone which is so silly, I can't install Gapps into LineageOS so essentially useless as the installer says the partition is too small and I do not have a way to fix that at the moment.
Thanks, and blankflash was able to get me up and running on stock but I cannot use the phone yet just like the DooGee S95 Pro I bought in hopes to use LineageOS... long story. Stuck with my ZTE Axon 7 from 2016 and a crap phone to make calls since my provider killed service to my ZTE Axon 7 so I carry basically 3 phones now. Until there is a fully working TWRP I am essentially screwed and feel like I wasted $400 on another phone.
Click to expand...
Click to collapse
Using the method I described above I was able to install Lineageos 19.1 and then gapps (mindthegapps) using lineage recovery. it should be entirely possible

Hello,
With the storage not being large enough I was trying to install openGapps ( stock size ) for Android 11 since I was trying to use Lineage 18.1 and not 19/19.1 since 19/19.1 appear to have bugs and 18.1 does not. Anyhow I tried to sideload openGapps and it said there wasn't enough space on the system partition. I suppose I should try mindthegapps instead.
Thanks

So anyone successfully installed it without causing hardbrick? What exact steps did u follow? r u using g100 or edge s and what is the build number of stock rom prior to install? thanks

Windoors said:
So anyone successfully installed it without causing hardbrick? What exact steps did u follow? r u using g100 or edge s and what is the build number of stock rom prior to install? thanks
Click to expand...
Click to collapse
I used the latest stock after doing a recovery with blankflash and the rescue utility from Motorola. I then installed LOSrecovery because TWRP isn't ready. I then booted into LOSrecovery and sideloaded 19.1 latest from this forum. I can't figure out how to resize /system correctly so I cannot install anything other than MindTheGapps which sucks a lot.
Anyhow if we get a working TWRP soon that will allow resize as TWRP can't show the system partition and A/B switching is being worked out then we will be good to go.
If this isn't helpful or you need exact commands then I can do that too for you.