Good Morning,
yesterday when i flashed a rom, something goes wrong.
My opo don't go in boot animation and work only the recovery and fastboot.
I don't know why but afther another reboot the phone is dead, i think that is a normal hard brick so i try to restore with the tool "msm8974 download tool" but it don't work, when i start the restore come out a red word.
I never seen a hard brick like this, the phone is 100% dead , when i press the power button don't vibrates and nothing come out, diplay is black.
What can i do to restore my opo? :crying:
Try Wiping everything from TWRP and try a different ROM.
Another thing to try is connecting ADB to get the logcat.
Can you give more details on what you've tried so far?
Additionally, I remember reading that the OPO can stop booting correctly when the battery starts failing.
umer936 said:
Try Wiping everything from TWRP and try a different ROM.
Another thing to try is connecting ADB to get the logcat.
Can you give more details on what you've tried so far?
Additionally, I remember reading that the OPO can stop booting correctly when the battery starts failing.
Click to expand...
Click to collapse
Now the phone is dead, if I press the power button nothing come out (no vibration, no screen) the phone look like without battery! (But it is over 50%)
I followed the tutorial to restore HARD BRICK with the tool but it don't success!
ghibli2 said:
Now the phone is dead, if I press the power button nothing come out (no vibration, no screen) the phone look like without battery! (But it is over 50%)
I followed the tutorial to restore HARD BRICK with the tool but it don't success!
Click to expand...
Click to collapse
Me to.. this morning my phone dead.. i dont know what can i do again..
Trying pressing all combination button not showing anything even in pc device manager usb not recognize or qhsusb_bulk not appear
Anyone can help me please.. @netbuzz
I have bricked this phone in and out, believe me lol all you gotta do is open the phone, unscrew all (TOP HALF) screws and UN plugg battery......wait about 30 sec RE plugg/connect battery and re run the unbricking tool
Related
here is my problem guys. i was trying to flash my htc touch 2 sprint it with Raphaelhardspl(wrong flashing) and in the process the screen went blank. i was trying to do it one more time and my PC is asking for qualcomm cdmd technologies msn driver, every time i connect the phone to my PC. i have tried it soft reset. and hard reset wont work. any suggestion will be thanks full. thank you. the main problem is that my pc wont recognize ??
WHOEVER solve my problem will pay 50 buck via paypal
The quickest way to brick your phone is to try to flash it with programs meant for other phones, which it appears you have done.( bricked )
Try putting it into bootloader and flashing stock rom , or try mtty.exe, but if your pc won't recognize it and your screen shows no life, it is probably toast. Does it at least have hardspl on it . ?
yes it does have hardspl. there have to be a way that my pc will recognized it. i think.
As denco7 said, have you tried getting into the bootloader mode?
Hold volume down and press the red button with your stylus.
Connect your pro2 to your PC and if it connects the word 'serial' will change into 'USB'.
If it does, your device is not bricked.
I suggest you flash Hard-SPL again, and make sure to follow the instructions exactly! Don't think you can do it just in a minute, just take your time.
Then flash another ROM by using MTTY (see here) and there you'll get some instructions.
Good luck!
it wont go to boot loader mode, when i connect it to the pc it begin to charge and noting happen , then suddenly the light go off and the pc detect a driver is missing quaccom etc. does any one know about that this driver.
I've had that before... that the MSM technology qualcomm **** is asking for a driver.
There's a driver replacement (used before mtty). You can try to install that; altough I don't think it will help.
If you can't get into bootloader your device is (probably) bricked.
What you can also try is getting your battery, sd-card and simcard out of your phone and leave it for an hour. Then put the battery only back, and try to boot.
Does your phone start when you press the start button? So do you feel a vibrate or somethin like that?
no it wont start but maybe by following that MTTY my pc read it, i will try it. . it doesn even bibrate it just that power light show when that phone its charging thats all.
thanks for you comment guys.
That's strange.
There's one last thing you could try: the ultimate hard-reset
Some time ago I bricked my diamond. I tried all available sofkey combinations.
Then, suddenly, my device vibrated like 3 tiimes very loudly.
It didn't still boot nor go into bootloader.
But after about 4 hours it booted!
I only don't know what the combination was... something like VOl UP + VOL DWN + lOCK BUTTON + RESET.
Just try some combinations, maybe it works for you.maybe not, but you could try it.
Does anyone have this problem? I`ve searched and cant find a solution.
I had sense rom on my phone then decided to go back to jboogie rom. I booted into stock recovery(power+vol down) and when i tried to tap bottom right of screen the screen wouldn`t respond so I couldn`t do a factory reset. I then tried volume up=power button to flash sbf through RSDlite. Nothing came on my phone screen telling me to attach usb, it juat stayed blank, although rsdlite said phone was connected so i started to flash sbf anyway. Then on the phone screen it said software update in progress, once it finished flashing, instead of saying rebooting phone on RSDlite it came up with "pass" and the phone wont boot or do anything at all now.
Sorry for long message, but hope someone can help.
Thanks
Mark
try to flash a stock rom sbf with rsdlite and after that, do a wipe in recovery mod. to enter recovery press power+ vol down, after the droid apears, push vol up+vol down. You have to see then the stock recovery menu. I did in the same way and is working. I think is now so easy to really brick this phone.
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
not even white led?
maybe your battery is 2low?
if u see the white led u can still go into bootloader and flash .sbf with rsd lite
Hi there,
I can't believe its dead!!
I have tried every rom available and tried out all the .sbf's too. A couple of times i thought i have bricked it but it was always done to user error (or a lack of understanding at times on my part). These Defy's seem to be almost bullet proof!
I had the "pass message" from RSDLite and all i had to do was flash the "2.2 bootonly" sbf to get past it. I have had corrupted boot loader messages and more but it just keeps coming back for more once things the right things are done in the right sequence.
Assuming your battery is ok, I would try installing one of the latest froyo .sbf's with RSDLite 3.9 only completion do a wipe from the stock recovery (hold pwr + vol down). Press vol up and vol down to activate the menu, select wipe with volume up or down, press power to go. The after rooting apply one of the excellent roms from Jboogie & Pays.
Good luck... sure it will be fine.
Andy
qpzmaluk said:
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
Click to expand...
Click to collapse
If you have only black screen, you have to flash the latest undowngradable rom you flashed, then you you finally get to moto logo, you will be able to go to recovery and wipe. After it it will boot just fine.
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
astearon said:
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
Click to expand...
Click to collapse
I had a similar thing when i flattened my battery half way through flashing an .sbf. I borrowed a friends battery, flashed the boot only and all was fine. There is a couple of pointers on the forum on how to charge your battery if you dont have a working rom (it wont charge without one! You have to get the motorola logo followed by the battery animation to charge your battery).
In your case im pretty certain you could have saved yourself the hassle of sending it off for service.
Andy
Thanks for all the replys, I have already had the dead battery a couple of weeks ago and "revived" it by putting the + and _ wires of usb cable into the battery of the defy, but this seems different, I cant get anything to work on it, no roms will flash and all I get is black screen. I do get the white led but only sometimes. It is very change indeed, I will try some of the solutions you guys said tomorrow and let yous know how I got on.
Thanks again
Mark
I did not want to risk charging out of wires, i have unlimited warranty on it after all so i gave it to service hoping a fix will be made by guys who know what they where doing (i hope).
In any case i see -qpzmaluk- tried off of wires and nothing happened.
I tried to flash again this morning using all the techniques above but I cant get rsdlite to recognise my phone either now. All i get is when connected to usb is the white led, nothing else happens when i try to go into recovery etc.
Mark
Huge thanks to EDITION I got my phone working again.
I did what he said about flashing last undowngradeable rom and surprisingly it came back to life. Brilliant mate, i cant thank you enough.
Mark
how did u do that? if u said your rsd lite cant recognize your phone?
I kept trying to connect to pc with usb and rsdlite eventually found it so I took the chance of flashing froyo 3.4.3-the one I last had on the phone, and surprisingly this time it went throughht to the end of booting the phone and now I have everything working again including stock recovery etc.
One thing to mention was that I couldn`t get into pwer+vol up or down before I flashed this time I flashed my phone. I just connected it to pc and luckily rsdlite recognised it this time and I just pressed flash button, then eventually phone booted up. So something was wrong and it didn`t flash it the normal way by going into stock recovery on phone but it worked
was installing ARHD 7.0, which ive done several times and now the phone wont boot after a reboot. i can vol/pwr up to get to the splash screen, but cannot get into fastboot/hboot or back into twrp. any ideas?
Belay my Last!
Fortunately I found a post from the M8 thread and was more or less, a timing issue on my part. Thanks to Tikerz for his post/reply
Quote below:
"When you plug it into the computer does the computer make a ding sound that it's connected? If so, then press power and volume up until the disconnect ding sound which indicates it's rebooting and then immediately press volume down and see if you can get into fastboot. The timing is tricky so I've found using audio cues from computer can help if the phone is messed up."
I had to do this also. It will work. I thought for sure I had bricked my M8. But if u hold power and volume up at same time time screen goes black..then let go of power and volume up and hold volume down till u see fastboot. From there u can fastboot flash RUU package. I say that cause I personally found that restoring a backup of re-flashing ROM didnt work..at least for me.
http://forum.xda-developers.com/showthread.php?t=2727831
donlu30 said:
was installing ARHD 7.0, which ive done several times and now the phone wont boot after a reboot. i can vol/pwr up to get to the splash screen, but cannot get into fastboot/hboot or back into twrp. any ideas?
Click to expand...
Click to collapse
A brick refers to a phone that is essentially a .. brick. Won't power on, no charge light, 100% dead.
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Pra7ul said:
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Click to expand...
Click to collapse
adb reboot bootloader
waterdaan said:
adb reboot bootloader
Click to expand...
Click to collapse
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Pra7ul said:
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Click to expand...
Click to collapse
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
noahvt said:
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
Click to expand...
Click to collapse
Even If my volume button dosent work then why wont it enter bootloader via advance reboot it just restarts to system after selecting reboot to bootloader,so i should hard brick my device once again, P.S. i have done that twice before though.
I'm going to try to keep this as simple as possible as I don't really know what I did wrong or how I ended up where I am now.
I have a Samsung Galaxy 8+ and I decided to root it. I decided to follow this guy's instructions on how to do it: youtube.com/watch?v=eh-I4uxAmUY.
I follow his steps and am bought to the "Unmodified System Partition" menu after having gone through the process of factory resetting, wiping my data and using Odin to flash twrp-3.1.0-r1_dreamlteks.
The problem is that now the touch screen is unresponsive. It does literally nothing.
I am stuck at the screen that says "Keep System Read only?" where I have to "Swipe to Unlock Modifications", but find myself unable to do so because my touch screen doesn't let me swipe!
So now I'm panicking:
Firstly, I can't get the phone to shut down. Holding the power button does nothing, even if I hold it for a full minute.
Secondly, I can't boot the phone into anything except this unresponsive TWRP thing.
Thirdly, my computer no longer recognizes my phone when I try to connect it via USB (might be unrelated?).
How ****ed am I?
Is my phone just bricked now?
Can I save this rooting attempt in any way, or at least revert to the stock?
Will bringing the phone to a retailer help me in any way, or have I already broken the warranty?
Please guys I am desperate for some assistance here.
ViRALiC said:
I'm going to try to keep this as simple as possible as I don't really know what I did wrong or how I ended up where I am now.
I have a Samsung Galaxy 8+ and I decided to root it. I decided to follow this guy's instructions on how to do it: youtube.com/watch?v=eh-I4uxAmUY.
I follow his steps and am bought to the "Unmodified System Partition" menu after having gone through the process of factory resetting, wiping my data and using Odin to flash twrp-3.1.0-r1_dreamlteks.
The problem is that now the touch screen is unresponsive. It does literally nothing.
I am stuck at the screen that says "Keep System Read only?" where I have to "Swipe to Unlock Modifications", but find myself unable to do so because my touch screen doesn't let me swipe!
So now I'm panicking:
Firstly, I can't get the phone to shut down. Holding the power button does nothing, even if I hold it for a full minute.
Secondly, I can't boot the phone into anything except this unresponsive TWRP thing.
Thirdly, my computer no longer recognizes my phone when I try to connect it via USB (might be unrelated?).
How ****ed am I?
Is my phone just bricked now?
Can I save this rooting attempt in any way, or at least revert to the stock?
Will bringing the phone to a retailer help me in any way, or have I already broken the warranty?
Please guys I am desperate for some assistance here.
Click to expand...
Click to collapse
You have voided your warranty so you can't take it down to the shop and get it replaced.
It isn't fully bricked because you can still boot into an "os" that isn't fully functional. It ain't recognised because you have to swipe past this and hop into the ADB sideload interface. Btw, try holding your home button, power button and volume up (or down) and report results.
If I was you, I would wait till the battery drains and shuts off and then let it be off for the rest of the night or something and then try again.
RAZERZDAHACKER said:
You have voided your warranty so you can't take it down to the shop and get it replaced.
It isn't fully bricked because you can still boot into an "os" that isn't fully functional. It ain't recognised because you have to swipe past this and hop into the ADB sideload interface. Btw, try holding your home button, power button and volume up (or down) and report results.
If I was you, I would wait till the battery drains and shuts off and then let it be off for the rest of the night or something and then try again.
Click to expand...
Click to collapse
Alright, I'll give it until it passes out from battery loss and then get back on when things change. Thanks for the reply!