Helllo i bought a redmi s2 and come with the 9.5.14 OOOMIFA, so i try update to MIUI10 using the normal method download the firmware and put it on the folder download_rom, like i didn't see nothing normal or someone talking about this i try the update, but fail and the phone came to brick i have not the phone bootload unlocked is lock, and dont know what to do, someone appear pls help
Fastboot and my flash
Fastboot And use my flash, install the ROM in mode fastboot. Install the drivers before.
Related
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk
hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
I had already rooted My S6 and install Xero lite rom It's still work fine. Then I try to install Axis rom in twrp
after i was flash my phone look seem got a bootloop ,my screen stuck on "Samsung Galaxy s6 Powered by android " but sound have loop again and again. I Try to put another rom file with Usb Cable and it didn't work then i try to flash stock rom with Odin because my phone still able to get in download mode but when i click start to flash It Show error and fail
can anyone help me please?
Sorry for my bad English skill.
Thankyou.
Bring your S6 back to Samsung for warranty repair.
tan3warut4 said:
I had already rooted My S6 and install Xero lite rom It's still work fine. Then I try to install Axis rom in twrp
after i was flash my phone look seem got a bootloop ,my screen stuck on "Samsung Galaxy s6 Powered by android " but sound have loop again and again. I Try to put another rom file with Usb Cable and it didn't work then i try to flash stock rom with Odin because my phone still able to get in download mode but when i click start to flash It Show error and fail
can anyone help me please?
Sorry for my bad English skill.
Thankyou.
Click to expand...
Click to collapse
When you tried to installed Axis ROM you do a dirty flash or a clean wipe? Can you still get into twrp recovery?
Piece of advice always do a backup or at least have a backup available on your phone.
Make sure to do a clean wipe and then install the ROM. If none of them work flash the official stock ROM for your phone via Odin
Okay, i have been owning a well functioning xiaomi mi note 3 unlocked bootloader, and rooted. Today i tried to install installed lineage os and thats where everything got messed up. I have lost my serial number, IMEI, mac adress and basically everything,,,I cant now use a sim card on my device coz it shut down itself and also cant access wifi, tried installing original firmware but to no avail, only saying missmatching image and device. and its like my phone is pronounced useless, any help will be appreciated!
Did you try fastboot flashing thry MIUI flash tool ?
Sent from my Mi Note 3 using Tapatalk
i had the same problem. if you have twrp, download recovery rom from official site and install it from twrp. then you can install fastboot rom and lock bootloader if you want.
Maybe the efs partition is corrupted
Did you solve the problem? I got the same thing too...
Hi,
I recently got a Note 7 pro from China as a gift and I flashed it to global rom using fastboot. But because there was an app that wasn't working anymore and people have suggested its because the phone is in unlocked mode, so I went ahead and used ADB to lock it and now it's stuck in this recovery mode 3.0. Does anybody know how to either reset the phone or bypass this? Thanks in advance.
First unlock bootloader & flash again with fastboot rom
Locking and re-unlocking the bootloader
To lock the bootloader, the device has to be clean installed in Fastboot mode. For the instructions, see this page.
Once a device has been unlocked, it can be locked and re-unlocked using the same account countless of times, anytime, on any official or custom ROM.
BobbeyW said:
Hi,
I recently got a Note 7 pro from China as a gift and I flashed it to global rom using fastboot. But because there was an app that wasn't working anymore and people have suggested its because the phone is in unlocked mode, so I went ahead and used ADB to lock it and now it's stuck in this recovery mode 3.0. Does anybody know how to either reset the phone or bypass this? Thanks in advance.
Click to expand...
Click to collapse
1. Unlocking the phone will never affect any app except Mi Find My Device or other Mi Security (that too it isn't much of an impact)
2.. Now use Mi Unlock to unlock the bootloader, since you already unlocked it would unlock immediately but will also format your phone..
3. Now never lock the bootloader while using a custom ROM
Just tried but won't work... it says that this account is not bound by this device. I think it's in a *bricked* state.
Same here. Cannot unlock. Tried fastboot install with miflashtool.
I think you sign out of mi account before locking bootloader if you have done this then you have to visit service centre, they will be able to flash as they have authorised account or else you can try extracting rom into adb folder & direct click on clear all.bat file if it works
Yes, this is the problem. My mistake was installing pixel experience. After install, the device don't boot up and goes în bootloop and I wasnt able to turn off the device. After, I boot up în fastboot and flashed fastboot stock rom. This rom relocked the bootloader but don't boot. The version of stock rom is the good one, only one from miui site for Redmi Note 7 pro available. My device don't boot and cannot install anything neither stock or custom. The recovery is now stock without the option to turn off or installing update. Maybe i will try @navi_58861170's method. Maybe it will work. În other case we must use edl method which is a little tricky. If you find another way, tell me.
Not working. Sadly.
mitomanu said:
Not working. Sadly.
Click to expand...
Click to collapse
What is the error you are getting
Xbl error. Cannot flash on locked bootloader. Now my device was Sent to service.
i debloated my note 7 pro, now im stucked on recovery mode
pls help :<
chrislerchrisler said:
i debloated my note 7 pro, now im stucked on recovery mode
pls help :<
Click to expand...
Click to collapse
Download the full recovery ROM, Boot to recovery, and dirty flash the ROM.
Additional info : next time maybe debloat using
XiaomiADBFastbootTools.
Lost inbuilt recovery and peter twrp after custom rom flashing
I cant boot into any recovery mode afer installing any the custom roms like pixel experience in redmi note 7 pro violet.
whenever it try to boot into recovery mode , it cannt boot up into any recovery mode. please help me. i am tired of flashing stocked rom again and again for flashing new customs rom. i lost its all recovery mode,neither twrp nor its inbuilt recovery mode. phone only get restarting in normally.