I am using osprey with viper is nougat build. Is there any way to fix safety-net.
tom jp said:
I am using osprey with viper is nougat build. Is there any way to fix safety-net.
Click to expand...
Click to collapse
There will be module in magisk itself
---------- Post added at 09:30 PM ---------- Previous post was at 09:27 PM ----------
coolguy_16 said:
Hey guys,
After seeing this Magisk module https://github.com/DeicPro/xiaomi-safetynet-fix
I began to experiment to make SafetyNet pass on Osprey.
And finally I was able to do just that.
DO REMEMBER THAT THIS REQUIRES MAGISK WITH MAGISK HIDE ENABLED. THIS WILL NOT WORK WITH SUPERSU.
IF YOU ALREADY HAD SuperSU, CLEAN FLASH THE ROM AND THEN FLASH MAGISK ZIP.
Steps-
NOTE: SINCE GOOGLE HAS UPDATED SAFETYNET, THE BELOW METHOD NOW REQUIRES MAGISK v14.0+-
Open the build.prop file located in /system. [REQUIRES ROOT]
Add this line to the build.prop file-
For XT1550(Retail Asia | India (2GB))-
ro.build.fingerprint=motorola/osprey_retasia_ds_2gb/osprey_ud2:6.0.1/MPIS24.107-55-2-12/14:user/release-keys
For XT1543(Retail Latin America (1GB)) -
ro.build.fingerprint=motorola/osprey_retla_ds/osprey_uds:6.0.1/MPI24.107-55-2/2:user/release-keys
For XT1540(Retail US (2GB)) -
ro.build.fingerprint=motorola/osprey_retus_2gb/osprey_u2:6.0/MPI24.65-25/28:user/release-keys
For XT1540(Retail US (1GB))-
ro.build.fingerprint=motorola/osprey_retus/osprey_umts:6.0/MPI24.65-25.1/1:user/release-keys
Save and Exit.
Make sure you have enabled Magisk Hide in Magisk setings.
Reboot.
NEW! Magisk module is available here.
~Please read the Note section below~
---------------------------------------------------------------------------------------------------------------------------------------------------------------
NOTE-
1. The fingerprint values need to be exactly the same. Any small change will trigger safetynet.
2. You can use any fingerprint value for your device. It's not necessary for you to take value specific to your device. As long as the fingerprint is valid, it will work.
3. This same trick should also work on Merlin devices.
4. Read this too please.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks to -
@Rohi09 for providing stock ROM XT1550 build.prop
@Deic for his magisk module which inspired me to do this.
@KrisM22 for providing XT1540(2 GB) values.
@xMotoDA for providing XT1543 values.
@lettucecube for providing XT1540(1 GB) values and creating the Magisk module.
Click to expand...
Click to collapse
Here is a related thread
sanju455 said:
There will be module in magisk itself
---------- Post added at 09:30 PM ---------- Previous post was at 09:27 PM ----------
Here is a related thread
Click to expand...
Click to collapse
Not working bro!!
Have you followed all the steps as described
Related
I have an MTCD head unit (a Joying one) running the latest September image and MCU.
I have managed to get it all setup pretty nice, but I need Xposed (for tomtom)
I can install the SDK22 framework using flashfire, but as soon as it restarts it crashes.
Comes up with hundreds of messages like com.android.phone has stopped, pressing OK just gives you the same message over and over.
I know there are several versions and patched ones and ones by developer X and developer Y.
Does anyone know a working version for 5.1.1 MTCD units ?
Many thanks.
Install the latest Malaysk ROM(use that link not the previous 6.5 version), it has it integrated into it and it's finally pretty stable.
http://forum.xda-developers.com/and...tcd-device-t3385309/post68861166#post68861166
nixfu said:
Install the latest Maylask ROM, it has it integrated into it and it's finally pretty stable.
Click to expand...
Click to collapse
Thanks I should have already stated that I've tried the latest Malaysk ROMs and it's not stable for me on my MTCD unit.
It crashes, and it skips songs in the music player. So I'm trying to hack the stock ROM because that seems stable for me.
lordxenu said:
Thanks I should have already stated that I've tried the latest Malaysk ROMs and it's not stable for me on my MTCD unit.
It crashes, and it skips songs in the music player. So I'm trying to hack the stock ROM because that seems stable for me.
Click to expand...
Click to collapse
Use the one in that link. It's not an official release from him, its a dev/preview and he has made some changes to it from the original 6.5 and I think it is the most stable version since V4 on my Joying. Many people are calling it 6.5.5, but I think I believe he has a few more things he wants to do before an official v7 so he has not posted it as an official version yet with this update on the top of the thread, it is only via the link in that particular post that you can find it.
If you only have tried the official v6.5 and not this one, I highly suggest you try it. v6.5 was totally unusable on my joying but this version is running great.
Thanks but it looks like i've actually managed to solve my own problem !!!
And I got TomTom working wooohooo...
The version of Xposed framework I used is xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip
It worked ok with the MTCService app I needed to make TT work.
It's fast and *appears* stable. It even boots up in 14 seconds !!!
where can I find this version of xposed framework?
lordxenu said:
Thanks but it looks like i've actually managed to solve my own problem !!!
And I got TomTom working wooohooo...
The version of Xposed framework I used is xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip
It worked ok with the MTCService app I needed to make TT work.
It's fast and *appears* stable. It even boots up in 14 seconds !!!
Click to expand...
Click to collapse
can you give me a link to that? i wanna stay stock too but i want xposed
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
GameSomnic said:
where can I find this version of xposed framework?
Click to expand...
Click to collapse
ShadyGame said:
can you give me a link to that? i wanna stay stock too but i want xposed
Click to expand...
Click to collapse
install first
1. Put Xposed shell to work with the modules - XposedInstaller_3.0_alpha4.apk https://mega.nz/#!2Q4GGAJb!2CS3h7pwNsAwN2shW02ksQbKGHKh2Q-FdwkJMVUoIsI
2) Download the zip-archive with the framework Android 5.1.1 - xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip http://huifei.fs-fileserver.de/content/Xposed for MTCB 5.1.1 (framework only no app)/
3) is sewn in the [root] FlashFire zip-archive with the framework https://mega.nz/#!nIZyjKLT!zcKSL5PAhmCZKJJ6vzR8ANZRpVWG4eDSVunk0Ke0BTk
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
GameSomnic said:
where can I find this version of xposed framework?
Click to expand...
Click to collapse
install first
1. Put Xposed shell to work with the modules - XposedInstaller_3.0_alpha4.apk https://mega.nz/#!2Q4GGAJb!2CS3h7pwNsAwN2shW02ksQbKGHKh2Q-FdwkJMVUoIsI
2) Download the zip-archive with the framework Android 5.1.1 - xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip http://huifei.fs-fileserver.de/content/Xposed for MTCB 5.1.1 (framework only no app)/
3) is sewn in the [root] FlashFire zip-archive with the framework.https://mega.nz/#!nIZyjKLT!zcKSL5PAhmCZKJJ6vzR8ANZRpVWG4eDSVunk0Ke0BTk
Hiiiiii all!
I was just wondering if anyone has A.R.I.S.E. Sound Systems working in their S7 Exynos, I just need opinions if it works and if possible why it is better than the standard Viper4Android
Thaaaaaaanks alot ^w^
Got it working on my rooted vzw s7 running echoerom... latest v. 2.3.3 deuteronomy... got bootloops with previous vers.
---------- Post added at 04:48 PM ---------- Previous post was at 04:45 PM ----------
Did install selinux changer to change to permissive b4 install... i did it like i would in twrp, but in flashfire i wiped dalvik/cache - flash rom - flash universal selinux permissive - flash arise - flash dolby addon & finally smeejays toolbox... flashfire reboots & PROFIT
Donate to the ROM and Kernel sources builder!:
https://money.yandex.ru/to/410012996231186
####################
WhatsApp fix: https://forum.xda-developers.com/lg...-1-lg-magna-h502-my90ds-t3668878/post74920229
####################
LATEST ROM RELEASE: February 24, 2018
####################
Hello everyone!
I know LG Magna users is waited so long for official Android Nougat update.
But,
There will be no more official Android updates for this device...
Hey, don't be upset. At least I have the unofficial LineageOS 14.1 ROM for LG Magna H502 (my90ds).
You can download the ROM here (at my Google Drive):
https://drive.google.com/folderview?id=0B2yLJ45Kp33Rc1FYYzhOMkZqVms (2017/7/22 - old - v1)
Also, if you messed the boot.img up, you can also download the fresh boot.img there...
If this helps, hit the Thanks [:good:] button.
Note: This ROM was built by xcore_rj from 4PDA
####################
Link for 2017/12/14 (v2) update:
https://yadi.sk/d/-zZYGWVv3QdEfp
Link for boot.img:
https://drive.google.com/file/d/14XzxoXFiRV2QQv3lW3uNowmRNzza5Xyx/view?usp=drivesdk
What's New:
• Optimizations
• Updated LineageOS features
• FM Radio native support
• Ambient Display
####################
Link for 2018/2/24 (v3) update:
https://yadi.sk/d/b_yUAp5l3Sj7BV
Link for boot.img:
**NO BOOT.IMG PROVIDED**
What's New:
• Fixed video recording so it won't crash
• Updated kernel to version 3.10.72
• Fixed ffmpeg service, no more "green screen" when recording or mirroring
**INSTALL THIS UPDATE USING TWRP RESTORE FEATURE**
####################
Link for 2019/03/15 (v4) update:
https://drive.google.com/file/d/1PvOwTIQKAffqe8FL6vF5WIoYz-Nhmz78/view?usp=sharing
Changelogs:
https://forum.xda-developers.com/lg...-1-lg-magna-h502-my90ds-t3668878/post79166490
GPS workaround fix:
https://forum.xda-developers.com/lg...-1-lg-magna-h502-my90ds-t3668878/post79166555
As there is no SuperSU and/or Magisk support for this ROM, the only way to access superuser privileges ("root") this phone is by installing the "addonsu-14.1-arm-signed" ZIP package:
http://download.lineageos.org/extras
Sorry for the inconvenience.
####################
How to install the ROM (for v1-v2):
Tested on TWRP 3.0.0.0 for LG Magna (my90ds)
(You can search how to install TWRP for LG Magna around the internet)
Notes:
- Always perform a system partition backup before flashing!!
- Disable zip signature verification on TWRP
- Download the GApps package first before flashing (I recommend the nano package from Open GApps team)
1. Download the ROM (to your phone) from the earlier post.
2. Reboot to recovery
3. Open Wipe > Advanced Wipe
4. Select "System", "Data", "Dalvik/ART Cache", and "Cache"
5. Swipe to Wipe!
6. Go to the main menu
7. Open Install
8. Locate where did you place your ROM zip
9. Select it
10. Swipe to Install!
11. Go to the main menu
12. Install the GApps package
13. Select "Reboot System"
How to install the ROM (for v3):
https://forum.xda-developers.com/lg...-1-lg-magna-h502-my90ds-t3668878/post75763681
That's it! Now you'll have the sleek LineageOS performance inside your LG Magna (my90ds)!!!
does this work for h500f ?
My mom is using a Magna H502f, she complaints about lack of storage space very often. She uses Youtube on speaker a lot. So kindly let me know if it is possible to use it as a daily driver.
yashkrish619 said:
My mom is using a Magna H502f, she complaints about lack of storage space very often. She uses Youtube on speaker a lot. So kindly let me know if it is possible to use it as a daily driver.
Click to expand...
Click to collapse
Dear @yashkrish619
Well, the ROM is very stable and the system data uses only 3.69 GB of the internal storage.
Also, don't forget to frequently clean the app caches.
Sent from my LG Magna using XDA Labs
This rom was built by Xcore_rj?
CarlosHenrq said:
This rom was built by Xcore_rj?
Click to expand...
Click to collapse
Well, I pulled the sources from xcore995's GitHub.
Sent from my LG Magna using XDA Labs
Can i install this on my LG magna H500?
thanks
any bugs? issues?
---------- Post added at 07:20 PM ---------- Previous post was at 06:45 PM ----------
any bugs? issues?
whatsapp problem
hey , Whatsapp does not work on this rom .Whatsapp stuck on intiallization....
DiegoJp said:
any bugs? issues?
---------- Post added at 07:20 PM ---------- Previous post was at 06:45 PM ----------
any bugs? issues?
Click to expand...
Click to collapse
Whatsapp doesn't work correctly
Offline charge
---------- Post added at 11:27 AM ---------- Previous post was at 11:23 AM ----------
harman matharu said:
hey , Whatsapp does not work on this rom .Whatsapp stuck on intiallization....
Click to expand...
Click to collapse
Use this: https://yadi.sk/d/ktrYdSzi3H6gSA
Led fix: https://yadi.sk/d/HParDcZM3H7ect
(It's an older build)
CarlosHenrq said:
Whatsapp doesn't work correctly
Offline charge
---------- Post added at 11:27 AM ---------- Previous post was at 11:23 AM ----------
Use this: https://yadi.sk/d/ktrYdSzi3H6gSA
Led fix: https://yadi.sk/d/HParDcZM3H7ect
(It's an older build)
Click to expand...
Click to collapse
LED fix is not necessary anymore in the latest rom
Sent from my LG Magna using XDA Labs
Announcement:
• This ROM is compatible with PurifyOS' Xposed. Use Xposed Installer by @DVDandroid to flash Xposed SDK25.
Sent from my LG Magna using XDA Labs
Is there a way to get .flac music files working without third party apps? I studied my logcat and took some files (stagefright/ffmpeg related) from recent lineage Rom (LG G3S) but nothing changed. Rom is still working. Is this kernel related?
hidden wifi not connecting
plz fix it
also sim contacts showing up
Is there an alternative method to fix the whatsapp issue?
I wonder if there are another alternatives to fix the whatsapp issue other by flashing a previous build? And does anyone knows why whatsapp stuck on the initialization screen?
Installed on my lg magna 500h.
No problem all things works. Thanks .
Now i am on android 7.1
I used opgapps nano arm
JohnDovas said:
does this work for h500f ?
Click to expand...
Click to collapse
I'm asking the same thing myself I installed it , however it never went pass the boot screen any ideas ?
maybe locked bootloader?
I have no problems, even whats app is working.
First boot takes a long time.
SurgicalShooter93 said:
I'm asking the same thing myself I installed it , however it never went pass the boot screen any ideas ?
Click to expand...
Click to collapse
Looks like the kernel is not compatible...
Sent from my LG Magna using XDA Labs
Hey friends, I have found ResurrectionRemix-M-v5.7.4 marshmellow based.
I have tried it, every thing is fine but fingerprint sensor is missing.
For fingerprint sensor, download the lib zip file attached below. files and put them in the system folder as it is and change the permission to 644. if you like it then donate me via paytm ( +918930765938).
here is the download link.
Rom - ResurrectionRemix-M-v5.7.4-20170919.zip
Lib zip file - fingerprint lib for RR-M_mido.zip
what is the use of this file when we have resurrection remix nougat in which everything is working?
IND_TechNetiUm said:
what is the use of this file when we have resurrection remix nougat in which everything is working?
Click to expand...
Click to collapse
many of us still love mm because of xposed framework, still some of the modules doesn't work with naugat.
Fingerprint, Gps all are working??
What camera app.would be better with this rom??
---------- Post added at 06:22 PM ---------- Previous post was at 06:20 PM ----------
Which one is more stable the nougat or marshmallow rr rom?
volte is working???? i tried and its not working?? @Ak Arbitrator
ayush.gl said:
Fingerprint, Gps all are working??
What camera app.would be better with this rom??
---------- Post added at 06:22 PM ---------- Previous post was at 06:20 PM ----------
Which one is more stable the nougat or marshmallow rr rom?
Click to expand...
Click to collapse
It seem that the Nougat based is more stable than MM based (this one)
Ak Arbitrator said:
Hey friends, I have found ResurrectionRemix-M-v5.7.4 marshmellow based.
I have tried it, every thing is fine but fingerprint sensor is missing.
For fingerprint sensor, download the lib zip file attached below. files and put them in the system folder as it is and change the permission to 644. if you like it then donate me via paytm ( +918930765938).
here is the download link.
Rom - ResurrectionRemix-M-v5.7.4-20170919.zip
Lib zip file - fingerprint lib for RR-M_mido.zip
Click to expand...
Click to collapse
volte working????
Hello guys, I tried to install Xposed to my Mi Note 3 today via TWRP (v89) but I went bootloop after install.
I uninstalled the xposed with uninstaller and my device was booted successfully.
After, I tried to install xposed at this MIUI Forum thread: http://en.miui.com/thread-78894-1-1.html
But, not worked again.
My device stuck at bootloop even I tried to uninstall it this time.
I restored my backup as last option. My device is working well now but I still couldn't install Xposed.
Any ideas?
Note: I have Magisk.
[Sorry if my English is bad but I tried to explain my problem as much as possible ]
Hi,
on my Note 3 it works completly only with global 9.14, no newer versions and no costum rom.
In 9.14 you can simply install the xposed app (3.15) and from there download and install the framework.
In all other roms you must deactivate the ressource api (xposed app -> settings) before you install the framework.
Then the framework works, but not all modules (e. g. MinMinGuard).
Dark.Arrow said:
Hello guys, I tried to install Xposed to my Mi Note 3 today via TWRP (v89) but I went bootloop after install.
I uninstalled the xposed with uninstaller and my device was booted successfully.
After, I tried to install xposed at this MIUI Forum thread: http://en.miui.com/thread-78894-1-1.html
But, not worked again.
My device stuck at bootloop even I tried to uninstall it this time.
I restored my backup as last option. My device is working well now but I still couldn't install Xposed.
Any ideas?
Note: I have Magisk.
[Sorry if my English is bad but I tried to explain my problem as much as possible ]
Click to expand...
Click to collapse
dcmedia said:
Hi,
on my Note 3 it works completly only with global 9.14, no newer versions and no costum rom.
In 9.14 you can simply install the xposed app (3.15) and from there download and install the framework.
In all other roms you must deactivate the ressource api (xposed app -> settings) before you install the framework.
Then the framework works, but not all modules (e. g. MinMinGuard).
Click to expand...
Click to collapse
Thanks, I will try it :highfive:
I also thinking about a bugless and stable Custom ROM. Do you have any advice?
No custom good working. All is buggy. Tested all from xda.
---------- Post added at 03:46 PM ---------- Previous post was at 03:45 PM ----------
Custom = aosp like
---------- Post added at 04:17 PM ---------- Previous post was at 03:46 PM ----------
Dark.Arrow said:
Thanks, I will try it :highfive:
I also thinking about a bugless and stable Custom ROM. Do you have any advice?
Click to expand...
Click to collapse
But you could use miui 10 with Google : sms app, dialer app, Google launcher, lock screen, <on miui 9.x F.e Google sms app can't work correctly, now works perfectly >. On developer options you could turn off miui optimalization (yes it could be turn off, people don't like it), and you has aosp like Rom.
---------- Post added at 04:18 PM ---------- Previous post was at 04:17 PM ----------
Dark.Arrow said:
Thanks, I will try it :highfive:
I also thinking about a bugless and stable Custom ROM. Do you have any advice?
Click to expand...
Click to collapse
But you could use miui 10 with Google : sms app, dialer app, Google launcher, lock screen, <on miui 9.x F.e Google sms app can't work correctly, now works perfectly >. On developer options you could turn off miui optimalization (yes it could be turn off, people don't like it), and you has aosp like Rom.