Related
[Q&A] [GPLv3][FALCON][Kernel]3.4.104-XPerience™-18+/3.4.103-XPerience™-STK-18+[16/10
Q&A for [GPLv3][FALCON][Kernel]3.4.104-XPerience™-18+/3.4.103-XPerience™-STK-18+[16/10/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GPLv3][FALCON][Kernel]3.4.104-XPerience™-18+/3.4.103-XPerience™-STK-18+[16/10/2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i've just flashed v18 on PA rom, everything is fine except dt2w. i try gesture wake or performance control, but still not work. :crying:
pianogreja said:
i've just flashed v18 on PA rom, everything is fine except dt2w. i try gesture wake or performance control, but still not work. :crying:
Click to expand...
Click to collapse
You need enable Dt2w with faux clock or other tweaker
later go to Wake gestures and now it work
It does not work quite right ...
Although I can install the kernel, the camera does not work properly, try as abriral says "can't connect to the camera", everything else works fine ... but I can not help if the kernel does not work very well.
Sent from Moto G (xt1033).
Regards.
TeamMex said:
You need enable Dt2w with faux clock or other tweaker
later go to Wake gestures and now it work
Click to expand...
Click to collapse
i use faux clock (latest version 2.2.6), but i can't find Dt2w option.
IGorMcLven said:
Although I can install the kernel, the camera does not work properly, try as abriral says "can't connect to the camera", everything else works fine ... but I can not help if the kernel does not work very well.
Sent from Moto G (xt1033).
Regards.
Click to expand...
Click to collapse
just flash cam-libs-old.zip, go to first page to download
I had to fall back to 17+ because 18+ broke my native hotspot, is native hotspot working in 18+ yet??
Camera?
I love this kernel as its the only one that I know of that still has OC. But everytime I try to open any camera app, even stock, it says that it can't connect to the camera. Why does it do that? Is there something I did wrong?
can anyone link me to the 17+ version can't find it
I had some problems with the camera it shows an error message but it worked fine. I flashed the old camera libs and now camera fc when I open it. What should I do? Are there any "new" libs to flash and fix it? (I am on stock 4.4.4)
No more dtw2 in xperience 17/18?
Hey,
Using these kernel for a while know. I read that dt2w does not work in 17 and 18 using unly trickstermod? Do I need to have a special xposed mod for that?
Thanks
no deep sleep
cannot achieve deep sleep in v18.
min set to 192
max to 1192
Does anyone know why?
Appreciate.
DanCap8 said:
cannot achieve deep sleep in v18.
min set to 192
max to 1192
Does anyone know why?
Appreciate.
Click to expand...
Click to collapse
turn off d2w
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
prgprg said:
I had some problems with the camera it shows an error message but it worked fine. I flashed the old camera libs and now camera fc when I open it. What should I do? Are there any "new" libs to flash and fix it? (I am on stock 4.4.4)
Click to expand...
Click to collapse
old cam libs aren't for stock i guess..did the same to me. reflashing the kernel also didn't help.
---------- Post added at 02:59 PM ---------- Previous post was at 02:58 PM ----------
DanCap8 said:
Hey,
Using these kernel for a while know. I read that dt2w does not work in 17 and 18 using unly trickstermod? Do I need to have a special xposed mod for that?
Thanks
Click to expand...
Click to collapse
wake gestures. and u have to turn onn d2w through terminal. read op
---------- Post added at 03:02 PM ---------- Previous post was at 02:59 PM ----------
@TeamMex can u release a patch for cam on stock...getting stuck with 18+
I did my own patch with the libs from stock kk rom and it works. i can try to upload it but just flashing the stock rom should fix it
Enviado desde mi XT1032
prgprg said:
I did my own patch with the libs from stock kk rom and it works. i can try to upload it but just flashing the stock rom should fix it
Enviado desde mi XT1032
Click to expand...
Click to collapse
the patch would b great! i want to avoid flashing stock..thanks in advance
tjkingg said:
the patch would b great! i want to avoid flashing stock..thanks in advance
Click to expand...
Click to collapse
mega.co.nz/#!tUsTmZKB!-inR56miLYNA04rOW_yzbqhgG3xfqd6eV28Kxz-yLp8
I only could upload it to mega. Just flash this from recovery and camera should be fixed on stock rom. It worked for me
Sorry for my bad english, im spanish
i think found a bug
HI! i have updated my cyanogen mod at the ultimate nightly. Reflashed xperience-18 kernel, and every time i open the youtube app, i got an error and the app crash.
Every time i see an video in chrome, chrome beta, the audio is playing and the video is in black screen, still a few seconds and chrome crash.
i've done a fresh reinstall of cyanogen (with all wipes), then open youtube app and videos in chrome/chrome beta and all function ok. Then flash xperience kernel, and the problems come again.
Any ideas? some other people with the same issue?
Thanks!
I'm running a stock rom and xperience kernel. the USB keyboard doesn't seem to work. Must I have CM 11 for this to work?
???
what file works in cm11 please help ???
Device turns on while chargin
I'm on PA + 18v (but tested v16 too) and devices turns on if you connect to charger while it's off.
Already tested with stock kernel from PA and phantom kernel and the problem dissapear.
Atached last_kmg.log (but I don't know if it would be something usefull)
nmapper said:
HI! i have updated my cyanogen mod at the ultimate nightly. Reflashed xperience-18 kernel, and every time i open the youtube app, i got an error and the app crash.
Every time i see an video in chrome, chrome beta, the audio is playing and the video is in black screen, still a few seconds and chrome crash.
i've done a fresh reinstall of cyanogen (with all wipes), then open youtube app and videos in chrome/chrome beta and all function ok. Then flash xperience kernel, and the problems come again.
Any ideas? some other people with the same issue?
Thanks!
Click to expand...
Click to collapse
video playback don't work on cm..wait for an update or use stock cm kernel
---------- Post added at 08:52 AM ---------- Previous post was at 08:51 AM ----------
prgprg said:
mega.co.nz/#!tUsTmZKB!-inR56miLYNA04rOW_yzbqhgG3xfqd6eV28Kxz-yLp8
I only could upload it to mega. Just flash this from recovery and camera should be fixed on stock rom. It worked for me
Sorry for my bad english, im spanish
Click to expand...
Click to collapse
thanks for the patch..but it didn't work
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
can you extract Boxer email from the c-apps of COS13...
really need that app
nulogic said:
can you extract Boxer email from the c-apps of COS13...
really need that app
Click to expand...
Click to collapse
Sorry, this post is only for TrueCaller integrated. See you in this forum http://forum.xda-developers.com/android/development/c-apps-modded-cyanogen-os-c-apps-cm13-t3254865/post67207838#post67207838
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
TheQuarterMile said:
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
Click to expand...
Click to collapse
Yes, it´s working for me. But you make all of the steeps of the first post... :bueno:
Did the above and got it to work on my OnePlusOne running Temaesk ROM. Just one question... I can't seem to find the option for vibrate on answer and hangup... Is it there?
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
I managed to get this done by flashing only one zip.
I updated the c-apps thread because there are more people in there.
if you want, you can can update the steps, if everything working for you.
Thanks, worked perfectly
There was already a time searching for these mods!
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
Is there any way to install the dialer on rooted stock Marshmallow?
kushalchauhan98 said:
Is there any way to install the dialer on rooted stock Marshmallow?
Click to expand...
Click to collapse
I don't know. This is for CM13 and CM13 based roms.
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
kunalshah912 said:
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
Click to expand...
Click to collapse
Thanks for the info. I'll upload soon again.
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
After I've tried to enable true caller for the dealer I've got an error
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
arvindgr said:
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
Click to expand...
Click to collapse
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Click to expand...
Click to collapse
Yeah It just worked fine for me. Give that a try...
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
sanangel said:
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Ibuprophen said:
sanangel said:
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Can I ask you what has worked?
Click to expand...
Click to collapse
sanangel said:
Can I ask you what has worked?
Click to expand...
Click to collapse
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
These are the Steps i took:
1) I Installed the "Cyanogen Account" app. Then i log into it.
2) I then i Installed the "Truecaller" app. Then i did not open it, nor did anything else, till I completed Step 5.
3) I then booted into Recovery and flashed the "Dialer" zip file. I then cleared the Dalvik Cache and rebooted the device.
4) After the bootup has completed, right away, I then went into:
I first entered the System "Settings" menu
--> Apps/Applications
--> selected the gear on the top right that placed me in the "Configure Apps" screen
--> i then selected "Default App"
--> i then selected "Phone App"
--> i then selected the blue "Phone" (which is probably the only one there to choose from)
--> then i then exited the System "Settings" menu.
5) Now you open the "Dialer" and then a "Truecaller" popup will appear. Select the "Yes" option. Then another popup will appear with an option to select the "Cyanogen" account. You will then select your email address (FYI... your email address is the username of your "Cyanogen" account). Once your email is selected, you will then proceed. Now just sit back and do nothing (as it will have your devices phone number already and will confirm it on it's own). Once you see the confirmation, you will then select the option to proceed.
CONGRATULATIONS!
You are now all set with Truecaller.
I hope my instructions are understandable.
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
Good Luck!!!
Sent from my Samsung SCH-I535 using XDA Labs
I have an MTCD head unit (a Joying one) running the latest September image and MCU.
I have managed to get it all setup pretty nice, but I need Xposed (for tomtom)
I can install the SDK22 framework using flashfire, but as soon as it restarts it crashes.
Comes up with hundreds of messages like com.android.phone has stopped, pressing OK just gives you the same message over and over.
I know there are several versions and patched ones and ones by developer X and developer Y.
Does anyone know a working version for 5.1.1 MTCD units ?
Many thanks.
Install the latest Malaysk ROM(use that link not the previous 6.5 version), it has it integrated into it and it's finally pretty stable.
http://forum.xda-developers.com/and...tcd-device-t3385309/post68861166#post68861166
nixfu said:
Install the latest Maylask ROM, it has it integrated into it and it's finally pretty stable.
Click to expand...
Click to collapse
Thanks I should have already stated that I've tried the latest Malaysk ROMs and it's not stable for me on my MTCD unit.
It crashes, and it skips songs in the music player. So I'm trying to hack the stock ROM because that seems stable for me.
lordxenu said:
Thanks I should have already stated that I've tried the latest Malaysk ROMs and it's not stable for me on my MTCD unit.
It crashes, and it skips songs in the music player. So I'm trying to hack the stock ROM because that seems stable for me.
Click to expand...
Click to collapse
Use the one in that link. It's not an official release from him, its a dev/preview and he has made some changes to it from the original 6.5 and I think it is the most stable version since V4 on my Joying. Many people are calling it 6.5.5, but I think I believe he has a few more things he wants to do before an official v7 so he has not posted it as an official version yet with this update on the top of the thread, it is only via the link in that particular post that you can find it.
If you only have tried the official v6.5 and not this one, I highly suggest you try it. v6.5 was totally unusable on my joying but this version is running great.
Thanks but it looks like i've actually managed to solve my own problem !!!
And I got TomTom working wooohooo...
The version of Xposed framework I used is xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip
It worked ok with the MTCService app I needed to make TT work.
It's fast and *appears* stable. It even boots up in 14 seconds !!!
where can I find this version of xposed framework?
lordxenu said:
Thanks but it looks like i've actually managed to solve my own problem !!!
And I got TomTom working wooohooo...
The version of Xposed framework I used is xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip
It worked ok with the MTCService app I needed to make TT work.
It's fast and *appears* stable. It even boots up in 14 seconds !!!
Click to expand...
Click to collapse
can you give me a link to that? i wanna stay stock too but i want xposed
---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------
GameSomnic said:
where can I find this version of xposed framework?
Click to expand...
Click to collapse
ShadyGame said:
can you give me a link to that? i wanna stay stock too but i want xposed
Click to expand...
Click to collapse
install first
1. Put Xposed shell to work with the modules - XposedInstaller_3.0_alpha4.apk https://mega.nz/#!2Q4GGAJb!2CS3h7pwNsAwN2shW02ksQbKGHKh2Q-FdwkJMVUoIsI
2) Download the zip-archive with the framework Android 5.1.1 - xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip http://huifei.fs-fileserver.de/content/Xposed for MTCB 5.1.1 (framework only no app)/
3) is sewn in the [root] FlashFire zip-archive with the framework https://mega.nz/#!nIZyjKLT!zcKSL5PAhmCZKJJ6vzR8ANZRpVWG4eDSVunk0Ke0BTk
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
GameSomnic said:
where can I find this version of xposed framework?
Click to expand...
Click to collapse
install first
1. Put Xposed shell to work with the modules - XposedInstaller_3.0_alpha4.apk https://mega.nz/#!2Q4GGAJb!2CS3h7pwNsAwN2shW02ksQbKGHKh2Q-FdwkJMVUoIsI
2) Download the zip-archive with the framework Android 5.1.1 - xposed-v86-sdk22-arm-custom-build-by-dsa-20160715.zip http://huifei.fs-fileserver.de/content/Xposed for MTCB 5.1.1 (framework only no app)/
3) is sewn in the [root] FlashFire zip-archive with the framework.https://mega.nz/#!nIZyjKLT!zcKSL5PAhmCZKJJ6vzR8ANZRpVWG4eDSVunk0Ke0BTk
Code:
* Your warranty is now void(almost)---------- Flashing this rom at your own risk
* If you aren't familar with flashing custom roms --------------- STOP HERE!!
* The roms comes as it is----no workarounds --------- no extended development
* If you wish to change or develop this rom -------------- send a P.M. to me
* I will not help you if you have issues and you didnt follow the guide
* Introduction *
I made this ROM, in order to have the best Pixel Experience without any additional/useless features. It is based on the latest Lineage OS and it was built by me. It is working perfectly on my 3T and it should work with the 3 too (unified build)
*Features*
Based on the latest Lineage OS (built by me)
February Security patch
All Google Apps (replaced the stock ones)
Pixel Launcher with round icon support
Pixel Boot Animation
Pixel Sounds
Pixel Live Wallpapers
Pixel's blue accent
Google Assistant
Root is included (you have to enable it from the dev options)
Round Icon for Settings
OnePlus' Recorder app
*Bugs*
Camera is buggy (expected)
*Installation Guide*
PLEASE FOLLOW IT
1. Download the ROM
1b. Download the add-on package (required)
1c. Download the GApps OpenGapps creates many problems)
2. Boot to TWRP
3. Wipe system, data, cache
4. Flash the ROM
5. Boot to the system and finish the setup wizard
6. Boot to TWRP
7. Flash the GApps
8. Flash the add-on
9. Boot to system
9b. In order to have your Phone App fully working, you must set the Google DIaler / Phone as default on the Settings (See here)
10. VOILA
*Download*
Take a look at the 2nd post
*Donations*
Donations are always welcome. But I think it is more than enough just to press the "Thanks" button
XDA:DevDB Information
Pixel Experience, ROM for the OnePlus 3
Contributors
t-shock
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader and TWRP installed
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-02-28
Created 2017-02-27
Last Updated 2017-02-28
Download Section
*Download section*
Links for:
ROM: Here
Add-ON: Here (you MUST flash this only on my LAOS and not on the official one)
Gapps: Here
*Changelog*
Version 1.1:
1. Another layout of the rom. Easier to fix any issue and easier to update.
F.A.Q
Frequently Asked Questions (F.A.Q)
You may have some questions about this whole project and this is completely normal. So let’s begin
Q: Google Play Services force closes a lot
A: No reason to panic. Just follow my guide and everything will work just fine.
1. Connect with your WiFi
2. Go to Settings → Apps and find the Google Play Services.
3. Wipe Data and Cache
4. Go to Permission of the app, and enable everything
5. Add your Google Account
6. Voila
Q: The SimToolKit is missing. I need it
A: Flash this zip and it will be restored. I removed it because it wasnt round (uploading)
Q: Can I flash any other Gapps package?
A: NO. The other packages replaces apps that are vital for the phone and it may lead to a bad experience overall
Q: Why did you made this rom?
A: I wanted to have a great Pixel Experience (thus its name)
Q: Any screenshot?
A: Take a look at the Screenshot category
*Thanks to*
Lineage OS Team for managing to create this rom for our 3/3T
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
kscjx said:
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
Click to expand...
Click to collapse
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
t-shock said:
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
Click to expand...
Click to collapse
OK. Thanks. Will report on my experiences
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Kookitza said:
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Click to expand...
Click to collapse
Glad to see older users !! Do you own a 3/3T now?
t-shock said:
Glad to see older users !! Do you own a 3/3T now?
Click to expand...
Click to collapse
Yep, sold my s7 and bought op3t
Kookitza said:
Yep, sold my s7 and bought op3t
Click to expand...
Click to collapse
I did exaclty the same
I love my 3T although I miss the IP68
Woow congatulations for the rom man 5 stars from me
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Here we go
cannot get the in call ui? any fix?
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Kookitza said:
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Click to expand...
Click to collapse
Me too, when the setup pass through the "Just a sec.." screen it stops working.
How to workaround??
Solved, I've just remove the setup wizard from /system/priv-app by using twrp's file manager.
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Yes. Go to Default apps and set Google dialer as the default one.
pankajramnani said:
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Click to expand...
Click to collapse
For me it works just fine. Try flashing root again, whether it's lineage root or supersu
manikandanguru said:
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
Click to expand...
Click to collapse
It is based on purely stock Lineage OS, not with extra commits.
OpenGapps will delete some apps and thus the ROM will have many issues eg no launcher or some apps may miss.
Try flashing the ROM and the Gapps (that I gave) without booting and of course wipe everything again
-BE AWARE-
Flash the given Gapps without booting the system. Let me be more specific. Do not boot the ROM before flashing the given Gapps, otherwise you will have many issues.
Also OpenGapps will delete Pixel Launcher and thus you won't be able to use the ROM
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Go to settings - apps - click on gear icon - click on 'Phone app' and select Phone.
This helped in my case.
video HD:
DOWNLOAD FOR MIDO:https://androidfilehost.com/?fid=1322778262904001290
DOWNLOAD EPIC ROM ADDONS:https://androidfilehost.com/?w=files&flid=223300[/URL]volte fix for last version 7.12.xx:https://androidfilehost.com/?fid=745849072291695502
Features:
Based on Latest weekly developer build
Multilanguage
Gapps Pico pre-installed (Google Play Store and Google Services... you can choose what Google app's are you going to install later )
Épic OTA Service Added on Settings
Epic Mods on OTA app
Music App Improved
Icons on Settings
Root SuperSU updated and adapted to RN4X
Init.d support
Busybox pre-installed
Kernel tweaks (very little changes on boot.img)
MIUI Launcher improvements
Camera MODs (better image quality)
Adway integrated on system (you can see also on Settings)
All Chinese app's and Google app's (bloatware) removed
Advanced Reboot Menú (PowerMenu improved)
DolbyAtmos Updated to latest version
Fingeprint Lock (Not Enabled by default)
Supports Xposed
Few New Icons Added
Some Nice Wallpapers added
RAM Improved [On an average 1.9GB or 1.8 GB is available]
More Languages and Spanish Updated (thanks to @JamFlux)
Assistant Touch Updated Like Epic Team Style
Animations on SystemUI (lockscreen). Thanks to Xiaomi EU.
Epic Bootanimation
Increased Battery Performance
Better Battery and Performance/RAM management thanks to few more code lines from Epic Team & Xiaomi Eu
Fixed OTA and Mods App Fixed Crashing!
Installation Instruction :
For Clean Install :
Go To TWRP
Wipe :
~System
~Data
~Cache
~Dalvik
Flash The ROM zip From Recovery
wait 10 minutes maximum to boot, if its stuck then:
flash lazy flasher https://androidfilehost.com/?fid=529152257862700328
flash SUPER SUhttps://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
Reboot
Enjoy
For Update From Previous Version :
Flash The ROM zip From Recovery
Wipe Cache and Dalvik
Reboot
enter TWRP flash SUPER SUhttps://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
Enjoy
Kernel Source:
Github
OfficialWebsite/Credits/Downloads:
http://www.epicrom.pro"]epic rom[/URL]
I'm not the developer of this rom, I'm just sharing it., thanks to @Escobar 1945
TWRP recommended, video tutorial HD:
Screenshot??
Finally and congratulations!
another new ROM, thanks!
gonna try it.
Google voice search working, does not answer speaking - Fix Please.
---------- Post added at 05:06 AM ---------- Previous post was at 04:56 AM ----------
boyriot said:
another new ROM, thanks!
gonna try it.
Click to expand...
Click to collapse
This rom is already long for 4pda and other Forum:good:
Few days ago, I have flash rom, but it just logo and does not work.
Great rom
I want to try it
MinkDaz1st said:
Few days ago, I have flash rom, but it just logo and does not work.
Click to expand...
Click to collapse
Flash lazy flasher after rom installation
8.0?
Flashed it two weeks ago and it is working flawlessly.
Thank you
just fresh instaled on my note4 work very good
---------- Post added at 07:43 PM ---------- Previous post was at 07:04 PM ----------
desoooooo said:
just fresh instaled on my note4 work very good
Click to expand...
Click to collapse
only thing is the signal drop
I would invite the developer ESCOBAR 1945 to discuss this Rom. smokerman just inserted it and does not provide any information or even respond. We invite ESCOBAR 1945 .
Is Bluetooth work correctly with hand free systems?
Wysłane z mojego Redmi Note 4 przy użyciu Tapatalka
coool, very like this rom form redmi note3 kenzo....now support for redmi note 4x mido.....GOOOD
Best miui 9 rom ever I loved it ....no bugs and everything works as good. thanks for this amazing rom .....
This is really Epic ROM? settings have no any Epic Mod...
Fingerprint lock is not in settings...how to enable it? Nothing explained....
maxxx83 said:
Fingerprint lock is not in settings...how to enable it? Nothing explained....
Click to expand...
Click to collapse
Please share some scrrenshots
bhanu saini said:
Please share some scrrenshots
Click to expand...
Click to collapse
I'm on RR now...but believe me rom is same as xiaomi.eu and Globerom.It only has some apps added and i don't like new installed apps app in settings because you can't set all apps permissions like in same app in xiaomi.eu.