Database Info

New update from italy new firmware 3.33.401.6 and new radio 11.76a.3504.00u_11.24a.35

In italy today htc release for normal sensation new update (68 mb) and this update firmware to 3.33.401.6. Other details when peoples report many details.
Edit ok this contain new radio 11.76a.3504.00u_11.24a.3504.31_m and hboot is 1.27.0000

Exchange issue fixed..??uhm..

kekkojoker90 said:
In italy today htc release for normal sensation new update (68 mb) and this update firmware to 3.33.401.6. Other details when peoples report many details.
Edit ok this contain new radio 11.76a.3504.00u_11.24a.3504.31_m and hboot is 1.27.0000
Click to expand...
Click to collapse
Direct link to ota file: http://fotadl.htc.com/OTA_PYRAMID_I...32.401.5_R_release_266230n9ouzm6y7ls02drn.zip

Error during the update.red exclamation mark.
not even by recovery

IRREAL said:
Error during the update.red exclamation mark.
not even by recovery
Click to expand...
Click to collapse
because this want stock recovery

ops..
PYRAMID PVT SHIP S-OFF RL
HBOOT 1.27.0000
Any guide for s-on please?

After upgrade my WiFi stopp working (can´t get connected to my router)

IRREAL said:
ops..
PYRAMID PVT SHIP S-OFF RL
HBOOT 1.27.0000
Any guide for s-on please?
Click to expand...
Click to collapse
you dont need to s-on, you just need stock recovery

Jonny said:
you dont need to s-on, you just need stock recovery
Click to expand...
Click to collapse
Ok and where can I download this recovery?
How to put it?

How I can apply this via bootloader? Im running 3.32.401.5_R with superCID and s-off with stock recovery too. Completely stock and not rooted.

Available here in Germany as well. Installed it without any issues. Everything seems to be working as expected, GSM Call, HSDPA connection and WiFi all working. Seems that HSDPA reception is a bit better, tested this within an elevator were I usually dropped of the network, this time even data transfer was possible...might be the weather but perhaps an improvment...
bye
Sven

IRREAL said:
Ok and where can I download this recovery?
How to put it?
Click to expand...
Click to collapse
run an RUU and it will give stock recovery
---------- Post added at 05:07 PM ---------- Previous post was at 05:06 PM ----------
ajay83 said:
How I can apply this via bootloader? Im running 3.32.401.5_R with superCID and s-off with stock recovery too. Completely stock and not rooted.
Click to expand...
Click to collapse
You need to recieve the OTA first, there may be a way to download it from the link in first post then flash but if there is then ive forgotten it, sorry

ajay83 said:
How I can apply this via bootloader? Im running 3.32.401.5_R with superCID and s-off with stock recovery too. Completely stock and not rooted.
Click to expand...
Click to collapse
simply install new baadnewz rom with this new base. And apply new radio via bootloader

kekkojoker90 said:
simply install new baadnewz rom with this new base. And apply new radio via bootloader
Click to expand...
Click to collapse
Thanks bud. But dont want a custom rom.

I just received this update in Finland. So far so good. I disabled fast boot and it no longer optimises all applications every time it boots.
- Mark.
Sent from my HTC Sensation Z710e using xda premium

Mark RS said:
I just received this update in Finland. So far so good. I disabled fast boot and it no longer optimises all applications every time it boots.
- Mark.
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Can you tell me how to do that disable fast boot.

cicc74 said:
Can you tell me how to do that disable fast boot.
Click to expand...
Click to collapse
Menu > settings > power >
Edit: I'm guessing that this update isn't available for the XE yet?

Not working for me, red triangle when he unpack the update with stock recovery (i've re installed all my phone with the ICS RUU in march because i have the same problem)
Bootloader locked non-root
Don't know what's the problem

UKseagull said:
Edit: I'm guessing that this update isn't available for the XE yet?
Click to expand...
Click to collapse
Wrong, this update was available for my Sensation XE tonight
I didn't test it because it needs recovery stock (what I do not have at this time), so I get the *** red exclamation mark.
I'll apply it an other day

Everything is working fine
Finally HTC has fixed those anoying bugs.

Serious Problem With Phone. Completely Lost & Desperately Need Help!

Hi guys
Basically I purchased a One S today second hand and have run into a massive problem. Basically I'm used to having an sd card and ended up accidental wiping the backup that I had of my stock rom. Totally my fault but now I have no ROM installed and cannot seem to do anything about it.
I can't seem to get adb to work (maybe because usb debugging is disabled?)
I have tried to flash roms such as
Ville_Europe_3.16.401.8_OTA_UPDATE_Stock_Rooted_ODEX_FULL
OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.9-3.16.401.8_release_314502nkooijnhkglckupn
These should be the correct ones given my CID is HTC_001 and my phone is an unbranded one. I have tried flashing them directly from
TWRP, ADB Sideload on the One S Toolkit, and also the "flash factory RUU Zip."
I keep getting various errors such as
In TWRP “zip verification failed”
Then when I turn zip verification off, I get “Error executing updater binary in zip”
I get the error when trying to flash via the toolkit.
“FAILED (remote: 24 parsing android-info fail)”
I am sure these are the correct roms for my cid, so I’m at a loss at what I can do.
I think I need a stock recovery to flash a stock RUU, but I can’t find a way to flash the stock recovery back since I can’t get adb to work. The drivers installed are the correct ones and it was working before this problem occurred.
Here are my bootloader details
Tampered & Unlocked
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.11.50.05.28
OPENDSP-v31.1.0.45.0015
eMMC-boot
Dec 14 2012.17.10:57: 12687
Toolbox seems to recognise it and I can attempt to flash but the roms just don’t seem to work. ADB just doesn’t list my device and I think this may have something to do with USB debugging.
It has been several several hours now and I really am stuck and extremely frustrated and just don’t know what to do next and it’s beginning to feel like this is money down the drain. I have search online for hours but can’t seem to find anything that’ll work for me.
I would really appreciate some help if possible 
Thanks in advanced

Did you update your sdk files to newest version? Could be an explanation why your device isn't found by ADB

foeti said:
Did you update your sdk files to newest version? Could be an explanation why your device isn't found by ADB
Click to expand...
Click to collapse
Thanks for your response
As far as I'm aware they're the latest ones. It worked earlier when I flashed the stock recovery back, but doesn't work now ever since I foolishly wiped everything.

Oh, ah you tried to flash OTAS. That won't work without any RUU. Choose the right RUU for your device, relock your bootloader and run the .exe
Btw. I never had to flash the stock recovery before running a RUU...
Gesendet von meinem One S mit Tapatalk 2

foeti said:
Oh, ah you tried to flash OTAS. That won't work without any RUU. Choose the right RUU for your device, relock your bootloader and run the .exe
Gesendet von meinem One S mit Tapatalk 2
Click to expand...
Click to collapse
Sorry, I'm a little bit confused with what you mean
I tried running the exe RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
After several minutes of looking like it was working it eventually gave me "ERROR (155): UNKNOWN ERROR"
"The rom update utlity cannot update your Android phone.
Please get the correct ROM update utility and try again"

Opps sorry.. Bootloader was still locked!
Will unlock and try again
Thanks

fade2black101 said:
Sorry, I'm a little bit confused with what you mean
I tried running the exe RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
After several minutes of looking like it was working it eventually gave me "ERROR (155): UNKNOWN ERROR"
"The rom update utlity cannot update your Android phone.
Please get the correct ROM update utility and try again"
Click to expand...
Click to collapse
Uh, OK... Cause in your OP you wrote:
OTA_Ville_U_JB_45....
Do you have fastboot access to your phone?
If so, download stock recovery from here:
http://loadbalancing.modaco.com/download.php?file=ville_recovery_signed.img
Flash it via fastboot, relock bootloader and try to run RUU again....
Gesendet von meinem One S mit Tapatalk 2
---------- Post added at 11:28 PM ---------- Previous post was at 11:09 PM ----------
fade2black101 said:
Opps sorry.. Bootloader was still locked!
Will unlock and try again
Thanks
Click to expand...
Click to collapse
For running a RUU you have to relock your bootloader. Many devices need stock recovery for that, so try the steps from the post above....
Gesendet von meinem One S mit Tapatalk 2

foeti - you're a star
You're advise to relock the bootloader and flash the exe file worked perfectly.
Thank you so much for your help!

Stuck in bootloader

Hello everyone!
I've a problem.
I have an HTC One S(S3) with Unlocked Bootloader and S-ON.
Now I'm stuck in HTC logo(with some red words).
I can't run the Rom, I can't go in recovery(exclamation mark appear).
But I can go in bootloader.
So, I tried to install an RUU but the executable file return the [132] error(signature).
Have you a solution?
Thank you and sorry for bad english.
p.s.
this is my getvar output:
Code:
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.11.50.05.28
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: XXX
INFOimei: XXX
INFOproduct: vle
INFOplatform: HBOOT-8960
INFOmodelid: PJ4010000
INFOcidnum: HTC__405
INFObattery-status: good
INFObattery-voltage: 4112mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-64bedd38
INFOhbootpreupdate: 11
INFOgencheckpt: 0

Someone correct me, but doesn't "INFOversion-bootloader: 2.15.0000" mean that the phone is an S4 model?

tivofool said:
Someone correct me, but doesn't "INFOversion-bootloader: 2.15.0000" mean that the phone is an S4 model?
Click to expand...
Click to collapse
Hm, info product vle also sounds like s4.
But back on topic: What did you (try) to do?
Edit: Before you run the ruu?
Basic path I would follow:
* flash stock kernel
* flash stock recovery
If that doesn't work:
* flash custom recovery
* MAKE BACKUP
* SAVE BACKUP
* install stock or custom ROM
* restore data from backup

Did you locked before you runned RUU?
If not, try.
Look on your package of your phone on the backside, which model you have.
Z560e -> S3
Z520e -> S4
Did you updated to Jelly bean?
If yes, any RUU for S3 won't work!
Try to flash a custom recovery (please take twrp 2.3.x.x). It must work.
And then you must flash a custom Rom. Take Liberty Rom or Paranoid Android. And after you flashed the custom recovery, flash the boot.img, cause you are S-ON. If you can start your phone now, make a Backup in TWRP and save the backup on your PC.
If all of these Steps were succesfull, send me a PN. I will send you a Tutorial, made by @khan.orak, how to flash stock rom via OTA!
But first of all, try my beginning steps.
Good Luck, and pay attention: send us all of the error Logs. We need them!
Sent from my HTC One S using xda app-developers app

Hey, i have exactly the same problem.
I got a S4 version, S-ON and stuck in the bootloader.
I have a TWRP 2.3.3 recovery and i can mount on my sdcard so i try to copy the last Liberty ROM just like you said.
Copy and installation were ok but when my phone is rebooting nothing appears except the HTC logo.
What am i doing wrong ?

Paperboy25 said:
Hey, i have exactly the same problem.
I got a S4 version, S-ON and stuck in the bootloader.
I have a TWRP 2.3.3 recovery and i can mount on my sdcard so i try to copy the last Liberty ROM just like you said.
Copy and installation were ok but when my phone is rebooting nothing appears except the HTC logo.
What am i doing wrong ?
Click to expand...
Click to collapse
Liberty ROM is the version of S3 processor.

Paperboy25 said:
Hey, i have exactly the same problem.
I got a S4 version, S-ON and stuck in the bootloader.
I have a TWRP 2.3.3 recovery and i can mount on my sdcard so i try to copy the last Liberty ROM just like you said.
Copy and installation were ok but when my phone is rebooting nothing appears except the HTC logo.
What am i doing wrong ?
Click to expand...
Click to collapse
Find a ROM for S4.
You're in the way to brick your Phone! DONT FLASH S3 roms!
Flash a S4 rom and flash boot.img/kernel of that rom. It'll flash fine and reboot fine then.
Sent from my HTC One S using xda app-developers app

leit4444 said:
Hm, info product vle also sounds like s4.
Click to expand...
Click to collapse
Exactly. It's an S4
I want kill the old owner. he said me that it's an S3 model. Why I had to doubt?
I'm sure it's an S4 model because the RUU S4 run good and complete the installation(same for a twrp for S4).
Now there is another problem. After I installed the RUU, it reboot continually.
Whats' worng? it maybe an Hardware problem? :crying:
In TWRP it doens't reboot but when "htcOne" logo appear, after a second it reboot again and again and again.
Thank you for the answer.
Basic path I would follow:
* flash stock kernel
* flash stock recovery
Click to expand...
Click to collapse
Where I could find these stock kernel and recovery?
Thank you

Thats a bootloop
I dont know how it is on a s4 model after RUU, but try to flash the kernel. Open the RUU setup via winrar or other programs.
I dont know exactly which zip you must open in the ruu but try to find the boot.img in the rom.zip/firmware.zip ...
I hope i can help you!
Sent from my HTC One S using xda app-developers app

Hi everyone,
I have a similar problem. I am also in a bootloop. And due to Hboot 2.15 and the lack of a RUU supporting my phone (T-mobile branding CID T-MOB101) I can't get back to stock. Unfortunately I can't get into any recovery, neither twrp, cmw nor stock recovery. I've flashed several twrp versions a couple of times but always when I select recovery in the bootloader the phone returned into the bootloop. After flashing the custom recovery I also used "fastboot erase cache" and flashed the boot.img.
Does anyone know how I can get TWRP or CWM up and running in order to be able to flash a custom rom?
Thank you in advance.

djmro said:
(T-mobile branding CID T-MOB101)
Click to expand...
Click to collapse
I have the same model and I had no trouble flashing CWM or TWRP. Currently I have the latest CWM.
On www.cyanogenmod.org there is a good tutorial on how to install CM on the Ville with TWRP.
Can you factory reset? Or erase storage?

djmro said:
Hi everyone,
I have a similar problem. I am also in a bootloop. And due to Hboot 2.15 and the lack of a RUU supporting my phone (T-mobile branding CID T-MOB101) I can't get back to stock. Unfortunately I can't get into any recovery, neither twrp, cmw nor stock recovery. I've flashed several twrp versions a couple of times but always when I select recovery in the bootloader the phone returned into the bootloop. After flashing the custom recovery I also used "fastboot erase cache" and flashed the boot.img.
Does anyone know how I can get TWRP or CWM up and running in order to be able to flash a custom rom?
Thank you in advance.
Click to expand...
Click to collapse
Do you already have the drivers?
-try to install Twrp 2.3.x.x
-than you can read the tutorial from @khan.orak "how to get back to Stock with Ota!
You must have a choice to install twrp. It MUST work. You can only go to recovery if you UNLOCKED your bootloader. Unlock it, if it is locked (htcdev) :*
Sent from my HTC One S using xda app-developers app

xQubee5o3 said:
Do you already have the drivers?
-try to install Twrp 2.3.x.x
-than you can read the tutorial from @khan.orak "how to get back to Stock with Ota!
You must have a choice to install twrp. It MUST work. You can only go to recovery if you UNLOCKED your bootloader. Unlock it, if it is locked (htcdev) :*
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Thank you! I have already had it unlocked. I'll try using the OTA method.

djmro said:
Thank you! I have already had it unlocked. I'll try using the OTA method.
Click to expand...
Click to collapse
Say which cid you have.
But I eill send you the correct script data which you must edit, too ^^
Just send me a PM.
Dont forget to "Thanks"

xQubee5o3 said:
Thats a bootloop
Open the RUU setup via winrar or other programs.
Click to expand...
Click to collapse
But I've installed the RUU with ".exe". How can I have the right kernel("boot.img")?

darkvision said:
But I've installed the RUU with ".exe". How can I have the right kernel("boot.img")?
Click to expand...
Click to collapse
Open with... Winrar?
Right click on ruu.exe
Select "open with..."
Select winRAR
But you must have installed winrar first. ;*
Sent from my HTC One S using xda app-developers app

Do you brought your one s back to life?
Sent from my HTC One S using xda app-developers app

xQubee5o3 said:
Do you brought your one s back to life?
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
I got mine figured out with the right rom that works with s-on if anyone wants help to get a custom rom working and stable send me a message. I have all files to save time.

RichieRich84 said:
I got mine figured out with the right rom that works with s-on if anyone wants help to get a custom rom working and stable send me a message. I have all files to save time.
Click to expand...
Click to collapse
I think your way is very easy for everybody

xQubee5o3 said:
I think your way is very easy for everybody
Click to expand...
Click to collapse
yes once shown how to use cmd correctly. lol

[S-Off] Convert to HTC USA Unlocked 1.12.617.6

this guide is probably not user friendly. im a long time htc user, and am just showing how i successfully converted my ATT A9 to the USA Unlocked A9 version 1.12.617.6
this should work for any A9 with the MID: 2PQ912000
if you have another MID like 2PQ910000, it may work but i cannot test -see step 2b (thanks @alray)
i also cannot test to see if this ACTUALLY unlocks the phone, because i dont have a nanosim from another carrier
finally, i am not responsible if you mess your device up and make it unusable, this worked for me.
i used SuperCID, 11111111, but this also may work with the cid of the unlocked phone, BS_US001.
Note: if youre using a different cid and/or mid you will not be able to install OTA updates. (thanks @htconeXX and @JochenP)
Extra Note: if you used superCID already, you can change it and try OTA again without reflashing, given you have not modified /system (tested by me)
prerequisites:
1.12.617.6 RUU: Here
drivers, bootloader unlocked from htcdev, s-off using sunshine YES PAY FOR IT IT WORKS AND THEYRE GREAT PEOPLE theroot.ninja
fastboot and ability to use command line
steps:
step 1: boot into DOWNLOAD MODE
this is the BLACK SCREEN that you can get to from the bootloader
from cmd, run
Code:
adb reboot bootloader
(or use the hardkey method)
which which will take you to the WHITE BOOTLOADER SCREEN
from there, navigate to "reboot to download mode" using the volume buttons and select with the power button
or
by turning off the phone, and holding the power + volume down buttons until you see the htc logo
step 2 change cid
once youre in the BLACK DOWNLOAD MODE screen, from your computer run
Code:
fastboot oem writecid BS_US001
from the command line (or fastboot oem writecid 11111111 for SuperCID)
(step 2b if your mid is something other than 2PQ912000 you can change it with the command
Code:
fastboot oem writemid 2PQ912000
which should allow you to flash the RUU (thanks @alray) )
then run
Code:
fastboot reboot-bootloader
step 3 go back into download mode, verify it says the cid youve chosen , and run the RUU you downloaded from above. follow the onscreen instructions to update your phone to 1.12.617.6
step4: re root, install recovery.
supersu BETA now supports /system-less root
you can find the TWRP flashible package here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
SYSTEMLESS SUPERSU is no longer beta, its WIP, and the post can be found HERE
the most recent supersu as of 12/31/15 is v2.65
(any supersu should suffice, but you know what they say, latest is greatest)
First flash twrp
Code:
fastboot flash recovery <recovery.img>
then boot into recovery and FORMAT YOUR DATA PARTITION
IGNORE PASSWORD PROMPT
GOTO WIPE>FORMAT DATA> and TYPE YES
reboot recovery
then sideload <supersu>.zip you downloaded earlier
go to advanced> adb sideload in TWRP
then from your computer run
Code:
adb sideload <supersu>.zip
which will patch your bootloader, and root your device

Ae3NerdGod said:
if you have another MID like 2PQ910000, it may work but i cannot test
Click to expand...
Click to collapse
Someone did it in the ruu thread.
Code:
fastboot oem writemid 2PQ912000
nice guide :good:

alray said:
Someone did it in the ruu thread.
Code:
fastboot oem writemid 2PQ912000
nice guide :good:
Click to expand...
Click to collapse
very useful. didnt know it was that easy on the a9. someone had to mess with hex to change the mid on the m8 i believe

Works with mobile Europe this method?,Thanks
Enviado desde mi HTC One A9 mediante Tapatalk

jureca said:
Works with mobile Europe this method?,Thanks
Enviado desde mi HTC One A9 mediante Tapatalk
Click to expand...
Click to collapse
Should work on any UHL variant

alray said:
Should work on any UHL variant
Click to expand...
Click to collapse
Ok Thanks.
Enviado desde mi HTC One A9 mediante Tapatalk

If it helps, I have an s-off, unlocked bootloader supercid and was able to flash this on a at&t branded a9

Hi Ae3NerdGod
you don't have to use adb reboot bootloader and - adb reboot download boots direct to download mode

htconeXX said:
If it helps, I have an s-off, unlocked bootloader supercid and was able to flash this on a at&t branded a9
Click to expand...
Click to collapse
yep, like said above, this should work on any UHL variant.

Can you remove my at&t branding too? Lol that'd be awesome. Nice guide. I'll be doing this when my at&t one arrives
Sent from my Nexus 5 using Tapatalk

alray said:
yep, like said above, this should work on any UHL variant.
Click to expand...
Click to collapse
Well with supercid s-off and stock unlocked rom, the 6.0.1 update will not take, downloads but wont install. I think I need to teh CID for a US unlocked phone.

cid AND mid
Gesendet von meinem HTC One A9 mit Tapatalk

SU 2.65 Beta is out. I would recommend you use 2.64 system less from here on out anybody to start with. There are issues with 2.63 (non-systemless) and trying to then go system less. More steps to ensure a proper installation.
2.65 Beta you can install right on top of 2.64 Beta in TWRP recovery. I tested this, no issues.
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3

htconeXX said:
Well with supercid s-off and stock unlocked rom, the 6.0.1 update will not take, downloads but wont install. I think I need to teh CID for a US unlocked phone.
Click to expand...
Click to collapse
JochenP said:
cid AND mid
Gesendet von meinem HTC One A9 mit Tapatalk
Click to expand...
Click to collapse
This is accurate, i will update OP with these notes.
techlogik said:
SU 2.65 Beta is out. I would recommend you use 2.64 system less from here on out anybody to start with. There are issues with 2.63 (non-systemless) and trying to then go system less. More steps to ensure a proper installation.
2.65 Beta you can install right on top of 2.64 Beta in TWRP recovery. I tested this, no issues.
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
i personally dont like systemless, ive been removing it afterwards and manually rooting, but ill update the OP.

@Ae3NerdGod would you you. Know if i s-off a sprint Htc a9 and convert it with your method... Would that sim unlock the device?

Google~Android said:
@Ae3NerdGod would you you. Know if i s-off a sprint Htc a9 and convert it with your method... Would that sim unlock the device?
Click to expand...
Click to collapse
Do NOT try to convert a Sprint/CDMA device! It will break completely break mobile data because the radio firmware is incompatible.

Captain_Throwback said:
Do NOT try to convert a Sprint/CDMA device! It will break completely break mobile data because the radio firmware is incompatible.
Click to expand...
Click to collapse
But wudnt returning the stock sprint wit ruu fix it?? I want to at least give it a shot..

I successfully converted by AT&T to USA unlocked thank you for the post. Only issue an facing is I can't delete pictures from my gallery is telling me about permissions on my system but I have gone thru the app and made sure it was active.
Sent from my HTC One A9 using Tapatalk

Convert from China to US
Work great for me
Thank you

Followed the guide and successfully converted my AT&T to US unlocked using SuperCID thanks to @Ae3NerdGod ran 1.55.617.4 Dev Edition RUU from @Captain_Throwback and updated to 6.0.1, re-rooted and installed Xposed on the stock ROM. I can confirm that all are working fine:good:

European cid HTC__034 update v1.24.401.7

Update https://twitter.com/sardroid/status/973784166058819584
OTA file https://androidfilehost.com/?fid=890129502657590717 Thanks @DavidMB
Magisk patched boot image to flash in download mode https://androidfilehost.com/?fid=673956719939827469
modelid: 2Q4D10000
cidnum: HTC__001
cidnum: HTC__034
cidnum: HTC__J15
cidnum: HTC__A07
cidnum: HTC__002
cidnum: HTC__M27
mainver: 1.24.401.7

How i can save the OTA?

Should be in one of the following locations
/data/data/com.htc.updater/files/
/data/data/com.android.providers.downloads
But you must be rooted

TeHashX said:
Update https://twitter.com/sardroid/status/973784166058819584
I just updated the phone but I didn't save the OTA, can someone save and share the ota.zip?
Thanks
Click to expand...
Click to collapse
Hi, see https://androidfilehost.com/?w=search&s=2Q4DIMG there are all current firmwares. :good:

neofrost37 said:
Hi, see https://androidfilehost.com/?w=search&s=2Q4DIMG there are all current firmwares. :good:
Click to expand...
Click to collapse
Thanks, it's not there, yet.

TeHashX said:
Thanks, it's not there, yet.
Click to expand...
Click to collapse
It's true, i was wrong, when you get OTA ?....i got same CID and i have the 1.24.401.2 but still no OTA

This morning, 5 hours ago

Do you have root?

TeHashX said:
Do you have root?
Click to expand...
Click to collapse
now no

I updated without saving ota and now I can't patch boot image with magisk, I'm stuck without root until I get boot.img from somewhere.

TeHashX said:
I updated without saving ota and now I can't patch boot image with magisk, I'm stuck without root until I get boot.img from somewhere.
Click to expand...
Click to collapse
Dont worry men, in just few hours it will be somwhere to download ..one thing, i dont know but looks the screen more bright after update, the system very smooth and the battery drain problem over the network stanby seems gone... please post your impresions please

Yes, battery seams to drain slower now

I saved the boot.img through TWRP recovery and patched with magisk, in case someone need it just flash in download mode
https://www.dropbox.com/s/2ygfflsb89j5u7w/patched_boot-1.24.401.7.img?dl=0

@topjohnwu @TeHashX One question... Just received update is available. I rooted my u11 plus with Magisk and don't have twrp (don't need it right now) So if I install the update, I guess root will be lost. So I just have to do the same procedure? Only flash the patched boot.img that is posted here?

Exactly
But before apply ota please save the zip and share, thanks.

TeHashX said:
Exactly
Click to expand...
Click to collapse
But before that I have to restore stock boot img with Magisk, right? Then take the Ota, then flash patched boot.img, then install Magisk and have root again?

No, I flashed directly with magisk, patched boot image and xposed

TeHashX said:
No, I flashed directly with magisk, patched boot image and xposed
Click to expand...
Click to collapse
Please help me! I got RUU decrypt tool to get stock boot.img and recovery.img. I flashed them, download OTA, but when installin it stopped at 24%. D I do not know , why? What is the problem? Thnx

TeHashX said:
No, I flashed directly with magisk, patched boot image and xposed
Click to expand...
Click to collapse
Ok, sorry for still asking... I download Ota and save zip. Then I restore stock boot img inside Magisk, then apply Ota. After reboot I patch the stock boot again with Magisk and flash the patched boot.img via fastboot in download mode... Right? ?

TeHashX said:
Exactly
But before apply ota please save the zip and share, thanks.
Click to expand...
Click to collapse
please check your PM. I don't have enough posts to write a link here. Thanks