Hi have the original US sprint version of the samsung s9+ which I had recently unlocked and unbranded from an unlocking service through team viewer. The model number is now SM-G965U1 and the baseband version is G965U1UEU3ARG7. I noticed on websites like sammobile that there are updates to this software for this phone model. When I click update software on the phone it states that I have the latest one. Is this normal or should it be able to update to later firmwares such as ARK5? I am using a t-mobile sim card in the phone currently. Any help would be greatly appreciated.
icebreaker0202 said:
Hi have the original US sprint version of the samsung s9+ which I had recently unlocked and unbranded from an unlocking service through team viewer. The model number is now SM-G965U1 and the baseband version is G965U1UEU3ARG7. I noticed on websites like sammobile that there are updates to this software for this phone model. When I click update software on the phone it states that I have the latest one. Is this normal or should it be able to update to later firmwares such as ARK5? I am using a t-mobile sim card in the phone currently. Any help would be greatly appreciated.
Click to expand...
Click to collapse
OTA software updates are controlled by your carrier, in your case, it is T-Mobile.
If T-Mobile does not offer an update for SM-G965U1, you will not get a notification to update and it will not find any updates when you check for them.
But, if there are updates for that model number available to download from Sammobile, just download the firmware and flash it via Odin onto your device.
Note:
When the unlocking service unlocked your device, they might have only used a small part of the software from S-G965U1 and not the entire firmware because the entire firmware might not be compatible with the model that your device originally was.
For example, they may have only used the bootloader from SM-965U1 or only the system.img or only the modem.img or any combination but not the entire firmware, if this is the case, flashing the entire firmware might cause issues.
I would email the unlocking service and ask them if the entire SM-G965U1 firmware can be flashed or at least ask what files were used in the unlocking process and which parts of SM-G965U1 firmware are safe to use or not.
Sent from my LGL84VL using Tapatalk
Droidriven said:
OTA software updates are controlled by your carrier, in your case, it is T-Mobile.
If T-Mobile does not offer an update for SM-G965U1, you will not get a notification to update and it will not find any updates when you check for them.
But, if there are updates for that model number available to download from Sammobile, just download the firmware and flash it via Odin onto your device.
Note:
When the unlocking service unlocked your device, they might have only used a small part of the software from S-G965U1 and not the entire firmware because the entire firmware might not be compatible with the model that your device originally was.
For example, they may have only used the bootloader from SM-965U1 or only the system.img or only the modem.img or any combination but not the entire firmware, if this is the case, flashing the entire firmware might cause issues.
I would email the unlocking service and ask them if the entire SM-G965U1 firmware can be flashed or at least ask what files were used in the unlocking process and which parts of SM-G965U1 firmware are safe to use or not.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Hey thank you for your response. I just spoke with them and they said that the full software was used and that I would get OTA updates? Even if I do flash the firmware, am I able to jump to the latest firmware or do I have to flash all of the firmware in order to get to the latest one?
icebreaker0202 said:
Hey thank you for your response. I just spoke with them and they said that the full software was used and that I would get OTA updates? Even if I do flash the firmware, am I able to jump to the latest firmware or do I have to flash all of the firmware in order to get to the latest one?
Click to expand...
Click to collapse
You could just flash the newest version.
Sent from my LGL84VL using Tapatalk
Where you able to figure out how to update from this baseband? I'm having the same issue as you.
zulieibanez59 said:
Where you able to figure out how to update from this baseband? I'm having the same issue as you.
Click to expand...
Click to collapse
I don't think you understand how things work when it comes to updates on android devices. It isn't like a Windows PC where any and all new updates are offered/pushed via Windows Update to every device that has Windows installed.
OTA updates are controlled and offered by your carrier, you will only get the update if your carrier CHOOSES to offer the update to devices on their network.
Just because your device manufacturer has released an update, does not necessarily mean that your specific mobile carrier will offer it to their customers, some devices never receive updates from the carrier for "this" or "that" device whereas other carriers would offer the update to those devices.
It's all a matter of who your carrier is, not what device you have.
For example, Samsung could release an update for S9+, then "this" carrier could choose to offer the update to the S9+ devices on their network and they would be able to update via OTA update through system settings.
Or
Samsung could release an update for S9+ but "that" carrier could refuse to offer the OTA update to devices on their network. In this case, the device can still be updated by manually downloading the update via the internet and then manually flashing the update via Odin, instead of via OTA update through system settings.
To put this in perspective in comparison to a Windows PC vs android, if Windows Updates were handled the same way that android updates are handled.......
The way android updates are offered by your carrier, for Windows PC, the equivalent of this would be Microsoft offering Windows Updates but then the updates only being available based on who your internet service provider is. In this theoretical example, your internet service provider may or may not allow the update to be installed on your system. If your service provider doesn't allow the Windows Update to be installed through their network, you would have to manually download the update and install it yourself instead of using the Windows Update Service to install the update automatically.
Does this help you understand how the update system is handled when it comes to android updates?
Sent from my LGL84VL using Tapatalk
Related
Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
theevilpotato said:
Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
Click to expand...
Click to collapse
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
dylanneve1 said:
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
Click to expand...
Click to collapse
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
SM-G930P
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Barniedjfuze said:
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Click to expand...
Click to collapse
Yes it will, i am in belize with the U firmware and hotspot works great.
i was not able to to flash u firmware of s7 in sprint model g930p can any one help?
i use odin, u firmware of os 7 ,from sammobile,,, using odin i flash it ,, can any one help
pls help
SM-G930P converted to SM-G930U
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?
Barniedjfuze said:
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?
Click to expand...
Click to collapse
Did you flash all file in the SM-G930U folder (AP,BL,CSC,CP)? Because i did it with T-mobile,Verzion an it work fine
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Barniedjfuze said:
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Click to expand...
Click to collapse
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
CSC flashing
ZaKaRia OuH said:
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
Click to expand...
Click to collapse
Hey Buddy. I would recommend doing a full back up on your phone., using Smart Switch app
It saves all your numbers, message, etc..
Then proceed to flash the latest firmware for the Region or Provider. Using (CSC) not (home_csc) which means flashing the csc will wipe your phone data. Phone will be like new again. Proceed tru set up. Loggin in gmail. Proceed to update smart switch app if not found in apps. Then restore from the back up file. And good to go.
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
highhacker said:
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
Click to expand...
Click to collapse
He said all S7's in the USA are the same, which is correct. Exynos/930F isn't sold in the US, only way to get one is to grey import.
You can flash any USA model's firmware onto any other USA model because they're all the same hardware.
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
killerherts said:
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
Click to expand...
Click to collapse
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
quasihellfish said:
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
Click to expand...
Click to collapse
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Removed
killerherts said:
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Click to expand...
Click to collapse
Blame Sprint; there is really no reason for them to do what they did except keep users from switching their phone to another carrier. This isn't a Samsung thing. I don't believe you would be able to do this with any other Android phone, either (i.e. go backwards in bootloader versions).
Folks,
Happy 2018,
Quick one:
I bought a locked ATT SM-G955U & reflashed it to a SM-G955U1 (currently on the latest December Security update) but the issue here is that despite doing this and eliminating ATT bloatware my phone continues to show Service Provider SW Ver. 9889544437594c3958 XAA//ATT
My buddy have an unlocked SM-G955U1 out of the box & there is no Service Provider information on his phone settings. He also gets all updates via OTA without issues, whereas I need to flash using ODIN manually which is not an issue for me but will be easier to get the OTA updates.
My phone is almost perfect but is there any possibility of flashing the specific CSC file for the SM-G955U1 on my SM-G955U transformed to a SM-G955U1?
I guess this was explained clearly.
Thanks for your support. XDA is the best.
SW, if listed as xaa/xaa/att...is what you wanted. The last three are always hardwired. I bought a T-Mobile U1 and switched it to Verizon. So mine now says vzw/vzw/tmo. If I read correctly in previous postings, you may still be forced to update manually, if on ATT. I believe...
If you flashed the files correctly in ODIN, then you wont see the provider version at all. It doesn't appear in the unlocked firmware. And you'll also get OTAs just fine. I know, because I bought a VZW 955U and flashed it with the unlocked 955U1 software.
Yup I can confirm too. I flashed the unlocked firmware to my spring g955u.
I can get OTA updates same with unlocked phone
Precisely .. I need to flash the correct one...
Where do I get the unlocked firmware ?
rich168 said:
Yup I can confirm too. I flashed the unlocked firmware to my spring g955u.
I can get OTA updates same with unlocked phone
Click to expand...
Click to collapse
Did you use regular ODIN or the modded Odin?
Where do you get the unlocked firmware from?
I got it from sammobile & the SW version persists
henrickrw said:
Did you use regular ODIN or the modded Odin?
Where do you get the unlocked firmware from?
I got it from sammobile & the SW version persists
Click to expand...
Click to collapse
Nodded odin
Check snap+ thread
Hello, I have bought an LG Velvet ATT unlocked. I cannot update via OTA because I think it needs an ATT account and sim card for it to update via the ATT network but I live in Europe. Can I manually install the OTAs relesed by ATT (although I can't find any ATT ones) or do I have to flash another stock firmware that releses updates without a sim? Would it be possible to flash the Canadian android 11 stock firmware since it has the same model number than ATT LM-G900UM? Obviously the software version numbers are slightly different. I want to keep LGs software because I need it for the pen support.
Thanks in advance
(WIP, files are currently processing and uploading)
For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. A "U to U" or "U1 to U1" flash does not require a factory reset, but changing from one firmware to the other will require one. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via the various firmware download tools posted here on XDA like SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I have access to an internal Samsung firmware download tool that usually gets new versions before they hit the public firmware download tools, so that's where my files come from.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware (or haven't done it in a long time), I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=327752
U1 firmware: https://www.androidfilehost.com/?w=files&flid=327753
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you. For those who have already made use of my previous threads for a different device and are upgrading, welcome back
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- it's quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single flagship model, so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit the firmware download tools.
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data.
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in the firmware download tools if you're downloading yourself:
AIO = Cricket (not available via firmware download tools)
ATT = AT&T (not available via firmware download tools)
BST = Boost Mobile
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
DSH = Dish Network
TMB = T-Mobile
TMK = Metro PCS
USC = US Cellular
VZW = Verizon (available via firmware download tools, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
Flashed a physical T-Mobile F711U to a F711U1 XAA firmware using Odin(Can't stand the bright pink boot up animations).
Flash worked perfectly. But, when I tried to test doing an update from Google settings it failed every time with "Registration Failed". I flashed the device back to the T-Mobile F711U firmware and was able to update without issue.
Not sure if you ran into this issue, but it's worth noting you might not be able to update the phone if the carriers are checking the Firmware.
Edit: Also forgot to mention, had to use the patched Odin due to the Firmware Model mismatch. Phone does work properly though.
nwb_sam said:
Flashed a physical T-Mobile F711U to a F711U1 XAA firmware using Odin(Can't stand the bright pink boot up animations).
Flash worked perfectly. But, when I tried to test doing an update from Google settings it failed every time with "Registration Failed". I flashed the device back to the T-Mobile F711U firmware and was able to update without issue.
Not sure if you ran into this issue, but it's worth noting you might not be able to update the phone if the carriers are checking the Firmware.
Edit: Also forgot to mention, had to use the patched Odin due to the Firmware Model mismatch. Phone does work properly though.
Click to expand...
Click to collapse
What do you mean by "doing an update from Google settings"?
What type of update? What "Google settings" exactly?
iBowToAndroid said:
What do you mean by "doing an update from Google settings"?
What type of update? What "Google settings" exactly?
Click to expand...
Click to collapse
From "Settings" App > "Software Update" > "Download and Install" and pressing the "Download and Installing.
I get "Connecting to server" and then immediately "Registration Failed" I've attempted over Wi-Fi and with that option toggled off.
This could also be the phone is new and T-Mobile doesn't have the F711U1 XAA firmware at their carrier level, but the registration failed annoys me. On F711U (official T-Mobile firmware) I simply get a notification that the device is up to date.
nwb_sam said:
From "Settings" App > "Software Update" > "Download and Install" and pressing the "Download and Installing.
I get "Connecting to server" and then immediately "Registration Failed" I've attempted over Wi-Fi and with that option toggled off.
This could also be the phone is new and T-Mobile doesn't have the F711U1 XAA firmware at their carrier level, but the registration failed annoys me. On F711U (official T-Mobile firmware) I simply get a notification that the device is up to date.
Click to expand...
Click to collapse
Which F711U1 version did you flash?
iBowToAndroid said:
Which F711U1 version did you flash?
Click to expand...
Click to collapse
I flashed my phone using the F711U1OYM1AUG7 (F711U1 XAA) firmware from sammobile.
I flashed it back to the T-Mobile firmware, (F711UOYN1AUGB (F711U TMB) and the issue went away.
I did flash it again to the XAA to confirm the problem this evening. Never retained data during the process. Factory reset and removed my account information (Google and Samsung) before updating the firmware each time.
I've done this on a few phones in the past. If I'm making a blunder in the process causing this then I'm truly sorry for wasting anyone's time.
Edit: Typo
nwb_sam said:
I flashed my phone using the F711U1OYM1AUG7 (F711U1 XAA) firmware from sammobile.
I flashed it back to the T-Mobile firmware, (F711UOYN1AUGB (F711U TMB) and the issue went away.
I did flash it again to the XAA to confirm the problem this evening. Never retained data during the process. Factory reset and removed my account information (Google and Samsung) before updating the firmware each time.
I've done this on a few phones in the past. If I'm making a blunder in the process causing this then I'm truly sorry for wasting anyone's time.
Edit: Typo
Click to expand...
Click to collapse
Well UG7 is the latest that's available. So yes, I would expect you to get an error.
Once an update is available, if the phone is still giving the same error, then you can worry about it
Hello, well from my understanding Xfinity is bootloader unlockable after 60days and fully played for. I am wondering if anyone is planning on making a thread for Xfinity specifically. Or want too work with me on One. Sorry too spam or thread. But if u are familiar with how rom building, and flashing was with any other recent samsung model/Xfinity/bootloader unlock. It would be highly appreciated too know your experience.
jokono421 said:
Hello, well from my understanding Xfinity is bootloader unlockable
Click to expand...
Click to collapse
Incorrect. No US models of any Samsung device have been user-unlockable for years now, dating back to the S7
iBowToAndroid said:
Incorrect. No US models of any Samsung device have been user-unlockable for years now, dating back to the S7
Click to expand...
Click to collapse
I think network unlock got mixed up with bootloader unlock. You can unlock the phones for use with another carrier after X days and completed payment.
twistedumbrella said:
I think network unlock got mixed up with bootloader unlock. You can unlock the phones for use with another carrier after X days and completed payment.
Click to expand...
Click to collapse
Probably so
Can someone locate the thom browne fimware please?
blkghost22 said:
Can someone locate the thom browne fimware please?
Click to expand...
Click to collapse
Well normally I would say that you can get it yourself from the various firmware download tools like SamFirm or Frija. But it looks like Samsung changed something over the weekend, as the current versions of the tools are failing to pull any firmware
So I can grab it for you
iBowToAndroid said:
Well normally I would say that you can get it yourself from the various firmware download tools like SamFirm or Frija. But it looks like Samsung changed something over the weekend, as the current versions of the tools are failing to pull any firmware
So I can grab it for you
Click to expand...
Click to collapse
Thank you and always the best.
blkghost22 said:
Thank you and always the best.
Click to expand...
Click to collapse
Added, UGC build
iBowToAndroid said:
Added, UGC build
Click to expand...
Click to collapse
Guess its taking time to upload? Dont see the files just yet..
Edit:
Nvm i see the files now... again thank you so much
I know long time ago it didnt work but just wanted to throw it out there... if i flash the u1 or thom browne am i able to flash the att userdata to get the advance msging and video calls?
blkghost22 said:
I know long time ago it didnt work but just wanted to throw it out there... if i flash the u1 or thom browne am i able to flash the att userdata to get the advance msging and video calls?
Click to expand...
Click to collapse
1. Thom Browne *is* U1 firmware
2. USERDATA belongs to U firmware, not U1. So I have absolutely no idea. You'll have to try it and see what happens
Have successfully flashed F711U1 to F711W. Everything working fine. Used Odin 3.14, CSC_OMC_OYV, and working on Telus with all available features working.
Please note that AFTER the flash, you will be prompted to reset the device to stock. Reason being is that it needs to install the appropriate CSC linked to the inserted SIM card.
Can anyone confirm if cross flashing different build firmwares that it will unlock the unlock bootloader option?
Currently on carrier firmware for TMobile and I'm wondering if this is possible or if the u1 firmware has the unlock bootloader option available
Greetings,
I am a new user here. I just bought Galaxy S10e and I really like the phone, but the problem is that I ordered it from USA (I live in the Republic of Georgia). Originally the phone was from AT&T, but the seller had it unlocked for any GSM carriers and it works fine with my Georgian sim card. The only problem is that I do not receive any software updates. It is stuck on Android 9 and One UI 1.0. When I try to check for updates, it says that my software is up to date. The same happens with Smart Switch.
I tried Frija and Odin. My CSC is G970UOYN1ASD9 and PDA is G970USQS1ASD9. There is no way to download firmware for my own country's CSC, because there is no firmware for SM-G970U (Snapdragon chipset), in Georgia they only sell Exynos ones officially. So, I tried to find updates with CSC ATT in Frija and it does not give me anything. I tried XAA and XAS (which is for unlocked phones) and still nothing. I tried TMK (I think it is for MetroPCS) and USC (This one is for US Cellular) and also TMB (T-Mobile) and they do have Android 11 firmware. But now I am afraid I will break something if I install above mentioned firmware to my device. Or maybe I will not break anything by changing the CSC, but maybe there is also a chance that if I install the above mentioned ones, the phone will get locked on these carriers and I won't be able to use my sim card. Is logical, or am I just overthinking it?
Any help would be really appreciated.
Thanks in advance.
don't flash your nations CSC- that shouldn't matter. Snapdragons LTE bands should be good enough to work internationally
go and reflash a USC or XAA rom with patched ODIN... I had to do this for my phone and OTA started working once it was on the correct CSC
you could even flash it to the latest firmware if you wanted too.
supertac said:
don't flash your nations CSC- that shouldn't matter. Snapdragons LTE bands should be good enough to work internationally
go and reflash a USC or XAA rom with patched ODIN... I had to do this for my phone and OTA started working once it was on the correct CSC
you could even flash it to the latest firmware if you wanted too.
Click to expand...
Click to collapse
Thank you for your answer.
What do you mean by correct CSC? I believe, my phone is on correct CSC now. I have already pasted it and in about phone > Software information > Service Provider it says ATT/ATT/ATT. But it seems that ATT doesn't receive updates outside US.
I cannot seem to find firmware for XAA/XAS, there is one for USC but I have already downloaded TMK. Is there any difference if I install USC or TMK? (TMK is MetroPCS).
GSamkh said:
Thank you for your answer.
What do you mean by correct CSC? I believe, my phone is on correct CSC now. I have already pasted it and in about phone > Software information > Service Provider it says ATT/ATT/ATT. But it seems that ATT doesn't receive updates outside US.
I cannot seem to find firmware for XAA/XAS, there is one for USC but I have already downloaded TMK. Is there any difference if I install USC or TMK? (TMK is MetroPCS).
Click to expand...
Click to collapse
Hi GSamkh... Did you upgraded to 11? Im trying to do the oposite, downgrade from Android 11 to 9. If you didnt the upgrade, can you check if the secure startup (or secure boot) its avaliable? Since in Android 10 and 11 isnt...
Seams that secure startup works on Galaxy S9 with Android 10 upgraded from 9.
dvaguirre said:
Hi GSamkh... Did you upgraded to 11? Im trying to do the oposite, downgrade from Android 11 to 9. If you didnt the upgrade, can you check if the secure startup (or secure boot) its avaliable? Since in Android 10 and 11 isnt...
Seams that secure startup works on Galaxy S9 with Android 10 upgraded from 9.
Click to expand...
Click to collapse
Greetings,
I have already updated to Android 11 using U1 XAA firmware and it works great. I used Frija and then Odin if anyone wants do to do this. Weird thing happened though - when I flashed the firmware and when Odin did it's job, the laptop suddenly shut down and I couldn't turn it back on. I had to disassemble it and unplug the integrated battery, plug it back on and fortunately it turned on again.
As far as your question goes, I am sorry but I cannot check it since I am already on Android 11.
Hi
GSamkh said:
Greetings,
I have already updated to Android 11 using U1 XAA firmware and it works great. I used Frija and then Odin if anyone wants do to do this. Weird thing happened though - when I flashed the firmware and when Odin did it's job, the laptop suddenly shut down and I couldn't turn it back on. I had to disassemble it and unplug the integrated battery, plug it back on and fortunately it turned on again.
As far as your question goes, I am sorry but I cannot check it since I am already on Android 11.
Click to expand...
Click to collapse
Hi GSamkh,
I am experiencing the same issue as you, purchased an AT&T branded SM-G970U for use in Australia. After you flashed to Android 11 using U1 XAA firmware, do you now receive OTA updates? cheers