Related
My phone is on bootloop, any modes doesnt work, including recovery mode... its restarting continously, it turns on for about 10 sec. Stucked up on its logo then turn off and on again on its logo.. how to fix? Its a cloudfone ice 500e.. i think fastboot wont work coz i cant turn it on that mode
kimgeek said:
My phone is on bootloop, any modes doesnt work, including recovery mode... its restarting continously, it turns on for about 10 sec. Stucked up on its logo then turn off and on again on its logo.. how to fix? Its a cloudfone ice 500e.. i think fastboot wont work coz i cant turn it on that mode
Click to expand...
Click to collapse
I have already wipeout/restore to factory settings. Turn off your phone, once turn off, HOLD Volume ( ), Call (bottomleft), and POWER for about 15-20sec. New loading screen will appear. Restore and Reboot
Turn off your phone, once its off hold down volume buttons, call button and power button for 15 to 20 seconds. This should force the phone into recovery
If that doesn't work I don't know what will, as the phone has very little info about it
Cloudfone ice 500e.. pls check the phone on google, i have tried all the possible button combination but it doesnt work, it keeps on restarting
Mobile Stuck on Boot Screen
I'm experiencing the problem to my android phone, it has stuck on boot screen after when I accidently deleted some fonts in /system/fonts/ using fexplorer.... Now its stuck. I've recovery e3 (original) phone is rooted with SU and I'm unable to start it. I used factory reset, and wipe partition... Can anyone help me on how to install new rom or how to access internal memory through computer as I've fonts on pc (that I deleted earlier). Or tell me how can I reflash a new rom. Its JB 4.2.2 dual sim...
Im suggesting that you should install new rom, using fastboot.. search some tutorial on youtube on how to use fastboot.. in your case its not that worse, you can still switch your phone to fastboot mode, thats all.. just try the fastboot and adb, that works
Last night my G6 rebooted itself and now it is stuck in a fastboot loop. It keeps restarting itself when connected to charger or PC. Nothing happens when phone is disconnected from charger/pc. Only message on screen is "Keep pressing power key for 10 seconds to exit fastboot mode" but it doesnt help. Phone was stock and not rooted...
MLu75 said:
Last night my G6 rebooted itself and now it is stuck in a fastboot loop. It keeps restarting itself when connected to charger or PC. Nothing happens when phone is disconnected from charger/pc. Only message on screen is "Keep pressing power key for 10 seconds to exit fastboot mode" but it doesnt help. Phone was stock and not rooted...
Click to expand...
Click to collapse
did you try to flash the newest rom ?
By the way .... which G6 do you have ? (L11, u10 etc..)
In the title it says U10, thought that would be enough info
I never flashed/rooted a phone before so I didnt try anything so far...
edit: I tried the suggestion from this post: http://forum.xda-developers.com/showpost.php?p=59545669&postcount=4
1. redownload the rom file from official location. ( http://consumer.huawei.com/kh/suppor...h.htm?id=38361 )
It is the official for g6-l11 (-> dl a version for G^-u10 instead)
2. put the update.app into dload folder on your sd card (unpack from the zip)
3. shut down your phone
4. hold volume+ volume- and power button. When it start to boot release the power button, and hold both the volumes until the instalation starts
5. you will see that firmware flashing begin, wait for the end
Click to expand...
Click to collapse
It seems to work, I see the green android dude and text "updating from external storage" but the problem is the phone keeps restarting itself so it doesnt continue with the update... I suspect sometings wrong with the battery, short circuit maybe?
edit 2:
After giving up last night i tried the above procedure one more time this morning...and for some reason the installation continued. Phone has been up and running again since 8:30 this morning...
where can i get stock rom that can be flashed via sp flash tool? my huawei ascend g6-u10 is bricked after flashing b330. any solution for this?
my phone is dead but my pc can still recognize it
Hi,
I was on Android N and decided to go back to KangVip Slim trough my TWRP Backup. So i opened the Bootloader again and flashed TWRP. But restoring of my backup failed and i started to wipe and delete in TWRP different things. I think i erased to much...
The result is, that now i the phone is booting to Huawei Logo and stucked there. All button-combinatios don't work.
No stock recovery, no dload method and the worst thing...no bootloader mode (USB connected to PC). The phone just reboot to the Huawei Logo.
I opened the phone, remove the battery cable, put it back, but it's still the same. I also discharged the battery and charged again. Same result, it boots just to the Huawei logo.
Is there any thing i could try to bring back to life or is it hardbricked?
Thanks in advance for any idea..
AL10 or L29,L09 to you have?
With AL10 version is easy to go back.
Install Android N again in Twrp.
Install Stock Recovery.
Go Back with Hi Suite.
Your open your Phone to reboot?
Press Power Button 10 sec. to reboot after reboot press 3 sec. to boot in eRecovery and shot down the Phone.
After Power off press Volume Down and hold and put in the Usb Cable in the Phone.
After this boot in Bootloader.
Flash Twrp for android N and wipe Cache,Dalvik,Data and System.Then flash Android N in Twrp.
Hi,
i have a L29. No TWRP, no bootloader mode to flash anything.
What happens when you switch off,then Power on and Press so long Volume up until the erecovery starts?
This must work!
Nothing, just reboot to the Huawei logo. I think there is no e-recovery installed.
Tavros said:
Nothing, just reboot to the Huawei logo. I think there is no e-recovery installed.
Click to expand...
Click to collapse
letschky said:
What happens when you switch off,then Power on and Press so long Volume up until the erecovery starts?
This must work!
Click to expand...
Click to collapse
Let me add one more step. Connect your phone to the computer via usb cable then switch off your phone. Press and hold Vol up + Power. Release it when you see Huawei logo.
Hope this will enable you to enter eRecovery.
Good luck
I tried that, but no success..
I think the Mate 8 is the first phone that i have brick...
I have the same issue too. L29. No TWRP, no bootloader mode to flash anything. Hopefully someone can guide us through this
Good news..
After I put the phone aside a few days and the battery has completely discharged, I connected the phone with my PC and tried to get into the fastboot mode.
I tried this before, without success. I was shocked when I saw the bright screen! It was in fastboot mode. I did not expect that. I left it untouched until the battery was charged a little bit.
Then i started to flash the NXT-L29C432B560 Firmware. It wasn't possible to do it with the "dload" method, so installed twrp-3.0.3.img and flashed the firmware with TWRP. For help use: https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c185b560-official-t3556789.
And now it works fine, like never something happend.
So all of you with same problem: Give it a try.
Now i have two babies.. Mate 8 and Mate 9. I will keep both....:good:
HI i have my mate 8 in the same conditons that you used to! please help me im desperate it doesnt even get on fastboot mode. Please I would appreciate your help thanks
dexz said:
Let me add one more step. Connect your phone to the computer via usb cable then switch off your phone. Press and hold Vol up + Power. Release it when you see Huawei logo.
Hope this will enable you to enter eRecovery.
Good luck
Click to expand...
Click to collapse
Hello!
I can do that with my mate 8, but only things i can access are erecovery, stock recovery and dload mode. neither of them work.
dcds_dck said:
I have the same issue too. L29. No TWRP, no bootloader mode to flash anything. Hopefully someone can guide us through this
Click to expand...
Click to collapse
Had this problem with L09. I've been trying to fix it all the week long.
If you can access dload mode, follow this guide:
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-downgrade-android-7-0-to-t3530999
If your phone is not NXT-L09, search for NXT-XXX (XXX= your phone model) rollback. It will surely work.
Hello everybody,
I managed to brick my mate 8 as per the title, honestly thinking why did i even bother, that whole saying "If it ain't broke, don't fix it." applies here 100%.
So i have been in the NXT-L29C636B180 which i put with the dload method (original was C636B103) and since then everything was good, all except the video camera that is.
So i wanted to try to get to the nougat update (561?) but i read that you need the 211 first. As i couldn't find it i used the android app: firmware finder, and using the proxy method i told basically the system that a new update is up and download it - so this is the update option in the settings..
So after it downloaded NXT-L29C636B211 then it restarted, starting unpacking, and the installation stopped at around 5% when it restarted by it self. And that was it...
I am in a screen where i cannot use the touch, but only the buttons on the side and have the options
"Reboot system now"
"Wipe data/ factory reset"
"Wipe cache partition"
Tried the cache and rebooting, didn't do anything.
Tried wiping, and reboot, then i go in another page
"Huawei eRecovery" where it asks to connect to the wifi and download but then throws an error message "Getting package info failed"
That is pretty much it, i tried putting the update.app in the dload folder in the sd card and tried to use that method but it wouldnt boot that (used the volume + and - and power buttons) but it took me back to one of the above.
Am i out of hope? Is there anything i can do to restore it?
I really appreciate the help.
same problem!
kaelthuzad said:
Hello everybody,
I managed to brick my mate 8 as per the title, honestly thinking why did i even bother, that whole saying "If it ain't broke, don't fix it." applies here 100%.
So i have been in the NXT-L29C636B180 which i put with the dload method (original was C636B103) and since then everything was good, all except the video camera that is.
So i wanted to try to get to the nougat update (561?) but i read that you need the 211 first. As i couldn't find it i used the android app: firmware finder, and using the proxy method i told basically the system that a new update is up and download it - so this is the update option in the settings..
So after it downloaded NXT-L29C636B211 then it restarted, starting unpacking, and the installation stopped at around 5% when it restarted by it self. And that was it...
I am in a screen where i cannot use the touch, but only the buttons on the side and have the options
"Reboot system now"
"Wipe data/ factory reset"
"Wipe cache partition"
Tried the cache and rebooting, didn't do anything.
Tried wiping, and reboot, then i go in another page
"Huawei eRecovery" where it asks to connect to the wifi and download but then throws an error message "Getting package info failed"
That is pretty much it, i tried putting the update.app in the dload folder in the sd card and tried to use that method but it wouldnt boot that (used the volume + and - and power buttons) but it took me back to one of the above.
Am i out of hope? Is there anything i can do to restore it?
I really appreciate the help.
Click to expand...
Click to collapse
That happened to me too. you will still be able to enter fastboot. plug your phone to your pc and and press and hold the power and volume down. that should take you to the fastboot screen.
find the appropriate twrp recovery for your phone and use the command
fastboot flash recovery "recovery name".img. wait till its done.
press and hold the power and volume down button till the phone reboots. that will takeyou to twrp recovery. there you could either flash b210 or the beta b521 -- which i am on.
crazynitro said:
That happened to me too. you will still be able to enter fastboot. plug your phone to your pc and and press and hold the power and volume down. that should take you to the fastboot screen.
find the appropriate twrp recovery for your phone and use the command
fastboot flash recovery "recovery name".img. wait till its done.
press and hold the power and volume down button till the phone reboots. that will takeyou to twrp recovery. there you could either flash b210 or the beta b521 -- which i am on.
Click to expand...
Click to collapse
Thank you for the response. I will give it a try today after work i am a complete noob so its the first time for me to see what fastboot is, never heard of TWRP, i was always stock so never needed to mess with my phones.
If i recall doing power and volume down while plugged it was taking me to the page i mentioned to wipe the data, reboot or wipe the cache.
I managed to go to the fastboot page on the phone by pressing volume - and then plugging the phone to the pc. Now in the white page on the phone it shows, Phone unlocked in red. Does this mean just it is carrier unlocked?
So do i need to have the bootloader unlocked to do anything here? How do i do that? I cannot buy the code i suppose now since my phone is bricked i will have to go the Huawei way? And how do i do that, i saw a site to create a HUawei ID but in the registration page it didn't mention UK anywhere (where i live), mentioned Hong Kong and other Asian territories. I bought the phone from Wonda mobile, and being the 636 i would think its the asian model anyway.
Regarding TWRP, i didnt install it from before the phone was bricked will i still be able to do what you mentioned? And for the image i need to use, do i need to go to the firmware i was in before (636B180) or the one i tried to go to (636B211)? I can't seem to find the 180 anymore anywhere.
Sorry for the mass amount of questions, trying to sort it i have the phone for less than a year and i am gutted for messing it up like that.
kaelthuzad said:
Thank you for the response. I will give it a try today after work i am a complete noob so its the first time for me to see what fastboot is, never heard of TWRP, i was always stock so never needed to mess with my phones.
If i recall doing power and volume down while plugged it was taking me to the page i mentioned to wipe the data, reboot or wipe the cache.
I managed to go to the fastboot page on the phone by pressing volume - and then plugging the phone to the pc. Now in the white page on the phone it shows, Phone unlocked in red. Does this mean just it is carrier unlocked?
So do i need to have the bootloader unlocked to do anything here? How do i do that? I cannot buy the code i suppose now since my phone is bricked i will have to go the Huawei way? And how do i do that, i saw a site to create a HUawei ID but in the registration page it didn't mention UK anywhere (where i live), mentioned Hong Kong and other Asian territories. I bought the phone from Wonda mobile, and being the 636 i would think its the asian model anyway.
Regarding TWRP, i didnt install it from before the phone was bricked will i still be able to do what you mentioned? And for the image i need to use, do i need to go to the firmware i was in before (636B180) or the one i tried to go to (636B211)? I can't seem to find the 180 anymore anywhere.
Sorry for the mass amount of questions, trying to sort it i have the phone for less than a year and i am gutted for messing it up like that.
Click to expand...
Click to collapse
did u solve it plz i have same problem
first download NXT-L29C636B170 here: https://goo.gl/dHk8r8 , download Huawei extractor here: https://forum.xda-developers.com/showthread.php?t=2433454 ,unzip update.zip from B170 firmware downloaded, go to huawei extractor and choose UPDATE.APP (from B170 firmware extracted), and extract only recovery.img, download ADB Command here: https://goo.gl/05Rx06 unrar and copy recovery.img into ADB Command folder, put your phone in fastboot mode, turn off your device, then hold volume - and fast plug your phone into PC, now you are in fastboot mode,go to ADB Command folder and hold shift, holding shift key do click right with the mouse,and click on: open command window, now write: fastboot devices, enter, and you can see your device are connect, now write: fastboot flash recovery recovery.img, enter, when it finished write: fastboot reboot, and enter, then the system reboot, turn off your phone, now put UPDATE.APP (from B170 firmware) into dload folder in sdcard, with your phone off hold volume +, volume -, and power at the same time, then you can update by dload method,wait it finish and the phone reboot, now you're running NXT-L29C636B170, and if you want update to NXT-L29C636B211 you can find here: https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727/amp/ unzip the update.zip and put UPDATE.APP (from B211) into dload folder in sdcard (obviously you need delete the UPDATE.APP from B170), now go to dialler and press *#*#2846579#*#* and project menu open, choose Software upgrade>SDCard Upgrate and yes, the system reboot , wait it finish and reboot, and you're now running NXT-L29C636B211. if you have any problem just tell me.
sorry for my bad english.
Hey guys,
it's my first post so please bear with me
I wanted to revert my old Mate 7 TL10 to stock (from Lollipop and TWRP) and downloaded a Lollipop stock firmware. I have done the flashing many times ago, but since this is my old phone and I haven't used it in a while and I somehow believed it was the TL09 (pretty dumb idea) , I downloaded the firmware for TL09 not the TL10. After extracting the boot, system, recovery and cust IMG files, I flashed them via fastboot.
The phone is stuck at huawei logo. None of the button combinations work. After turning off, it turns on again. What I already tried:
-VOL_UP & POWER -> does nothing
-VOL_DN & POWER -> does nothing
-BOTH VOL & POWER -> does nothing
I held the buttons even vor 20s, phone goes not beyond huawei logo. Even with disconnecting the battery to fully power off, the combinations have no effect. The phone is, of course, not beeing recognized by Windows. I didn't try the SD card rescue method, but since I can't enter rescue mode, it won't work I guess. I've read about a method by flashing using testponints but from what I understand, there is no such option with the TL10 right?
Is there anything I can do? Flashing via JTAG or whatever?
Thank you in advance