Hi, i had installed a huawey watch 2 bt only version into my 4g version, after that the whatc go to bootloop, i had recovery it by installing twrp and the last leo dllx rom zip from this forum, but now my whatch cant use mic, cant use speaker, cant connect to google assistant. I have tried all the roms on the specific section of this forum, but the problem persists. Someone can help me to escape from this crazy making situation?:crying::crying::crying:
Just reflash the factory wear OS image.
Thx for reply
Unfortunatly i have flash all firmware that xda form holds, but i cant find the right one. I need the original LEO-DLXX FIRMWARE, but i cant find it nowhere. Is there an huawei official software that can restore the whatch? Or somebody can post the original?
An other strange think is that in the fastboot menu i can see the several parameters of the whatc, and i see that my baseband version has not any number on it, the parameter is " N/A" . Meybe the reason why my mic, speaker and assistant connection dont works is becouse the basebend is missing? Is there a way to install the baseband only?
Related
Hi everybody,
recently i bought phone from China - Cubot ONE. I've been happy with it until i lost signal bars and cant connect to any network. So i google it and i found out how to fix it. Just reflash your firmware with another one. So i could not find any FW for Cubot so i downloaded for Cubot GT99 what is very similar phone and i hoped its would be working. Unfortunetly its didnt work good. After flashing this FW i could not switch on my phone or get to the recovery. I think its probably hard bricked, but iam not sure if its can be fixed when i send it back to supplier or if its any chance to do it by myself... Please iam desperate and i need any advice. Thanks.
what kind or core does Ur phone have?
I have a mtk6575 azense one, and as far today I couldn't find the original rom (i have backup of the original rom)
and I see a "universal mtk6575 rom" on internet, but I dont trust in it. because I read it can be dangerous using a kernel
from other models.
If u cant access to the recovery to flash another you may need to use "Flash tool" with the correct rom it'll fix the bricked status
I also use MTK droid tools
I have my backup but I doubt it will work on yours.
Hello, Thanks for your reply. I already sort that out. I use MTK droid tools to flash older android on my Cubot One. I think its was hard bricked, because i cant switch it on. So i try just put cable in with removed battery and hold down volume down button and after that my windows recognise phone and install driver. So i quickly flash it with stock android v0.3 and its works. But unfortunately still i could not get any network. There show me just no service... I find out that maybe i have lost imei, so i put it back with MTK Android tools. Now i got Imei numbers for both sim cards, it can recoginze my network provider but still ŃO SIGNAL! Could anybody tell me what is wrong now? I have no idea. Thanks anyway for any ideas. Regards.
Its quad core MTK 6589T, 1GB RAM, 8GB Rom, with two sim slots.
Hi,
have you checked this side: http://forum.xda-developers.com/showthread.php?t=2412068
Cheers
Help me!
Hi, I`m new on this website, and realy I don`t speake very wel english, but I have a big big problem, and I don`t know how to post this message, and I find this Post because I think is similar with my china mobile, If anybody see this post please give me a PM or help me on the email address: [email protected] it`s about my China Mobile; LAUDE Pulse S800, please help me somebody! Thank you!
Hello all and thanks for reading. I am hoping I can get some guidance and some sort of solution.
Long story short while in China I purchased a Y511-T00 instead of a Y511-U00. The first issue was upon returning home i realized I had no 3G. That I can live with using a MiFI device.
The problem I am facing is the Rom is laggy and it seems to be a half baked rom that was ported perhaps so the phone would be in english.
Facebook, Twitter and LinkedIn do not stay logged in when I restart.
Launcher sometimes freezes or goes blank for about 5-10 seconds
Contacts dont always show with a number immediately.
I am desperately in search of a Stock Rom with the regular Huawei Emotion UI or any other rom that may be more stable and user friendly. Any assistance would be greatly appreciated.
Alternatively does anyone know if i can use the U00 firmware on a T00 phone? I am worried I may brick the device if I start doing trial and error.
My phone details are as follows
Model Number : HUAWEI Y511-T00 (China Mobile)
Android version : 4.2.2
Baseband version MOLY.WR8.W1319.MD.TG.MP.V4.P18 , 2013/07/31 15:37
Kernel Version 3.4.5
Build Number : Y511-U30V100R001C328B120
Hardware version : VER.A
ZWstyles said:
Hello all and thanks for reading. I am hoping I can get some guidance and some sort of solution.
Long story short while in China I purchased a Y511-T00 instead of a Y511-U00. The first issue was upon returning home i realized I had no 3G. That I can live with using a MiFI device.
The problem I am facing is the Rom is laggy and it seems to be a half baked rom that was ported perhaps so the phone would be in english.
Facebook, Twitter and LinkedIn do not stay logged in when I restart.
Launcher sometimes freezes or goes blank for about 5-10 seconds
Contacts dont always show with a number immediately.
I am desperately in search of a Stock Rom with the regular Huawei Emotion UI or any other rom that may be more stable and user friendly. Any assistance would be greatly appreciated.
Alternatively does anyone know if i can use the U00 firmware on a T00 phone? I am worried I may brick the device if I start doing trial and error.
My phone details are as follows
Model Number : HUAWEI Y511-T00 (China Mobile)
Android version : 4.2.2
Baseband version MOLY.WR8.W1319.MD.TG.MP.V4.P18 , 2013/07/31 15:37
Kernel Version 3.4.5
Build Number : Y511-U30V100R001C328B120
Hardware version : VER.A
Click to expand...
Click to collapse
Anyone have any idea? I tried using google launcher but it tells me that I already have a default launcher and yet in applications there is no default set and the button is greyed out.
anyone idea please?
have the same phone which is rooted & I know of some stock ROMs which can be flashed with HiSuite.
I am a bit confused about what ROM you are running now, is it modded ?
I'll take a look at the build number you have specified and see what matches.
This phone is very low end Huawei.
Curious: What is the Build date ? (at bottom of about phone)
Well I have a copy of this ROM on my PC & it matches the Build Number (see screenshot) of what I have on my phone now.
It's stock but contains root too, so I have read. However I actually have not flashed my phone with this ROM.
It runs OK, some system messages still show in Chinese, but those are rare.
I rooted mine via an alternate method, I plan to slowly do some more tweaks when I have time
The ROM is around 270 Mb & another chopped version down I have is about 180 Mb
I cant see why you cant get 3G network, I am in Mainland China and have no real issues here, hope it works in Australia when I visit there.
With root I am sure you could tweak this.
My HuaWei USB 3g USB card works fine in Oz & China.
The primary use of this phone for me is to supply my 10" Tab 3 with 3G via WiFi.
Solution finally
After about 12 hours or so of trying different rom's namely u30 rom's including custom roms like Lewa Os. i realised that everytime my baseband would come up as unknown.
I finally used HUAWEI-Y511-T00 flash with SP Flash Tool to flash a basic T00 rom with no bloatware whatsoever just the core android apps.
I then used ES File, Framaroot and the South African system.img . I extracted all of the APK files from the system.img from the U30 rom and copied them one by one setting permissions to read, write - read - read for each Apk. I did a dalvic wipe and a cache wipe and restarted.
The end result is I know have Google Apps (the ones that I wanted) running perfectly with sync etc across all apps and my china mobile Y511-T00 now behaves like a normal y511-U00.
Points to note, you will need to backup your NVRAM so you can restore your imei and mac ID to get rid of the Warning NVRAM error. You will also need to write your original IMEI back use MKTdroid tools.
Custom rom's will not work, but I have set google launcher as my launcher and removed the regular launcher which I am happy with.
What ever you do, make sure you make a back up. The only thing I have not fixed is the startup animation and logo which i can live with. For UMTS / 3G I am using a mifi device that gives me 8 hours on the go but i barely need 3g as i use wifi more than anyting at home and office.
@ZWstyles
Yeah nice you have it sorted.
Still surprised you cant make use of 3G network natively in the phone do you have any ideas on that ?
Greetings, sharing here my particular problem from top to bottom just to take advice in general.
First of all, I live in Cuba, so my one and only network is Cubacel which runs GSM 900 mhz, so far so good with most phones.
I am between phones so I boorrowed this used J100h from a friend, which received it as a gift and has never been used. I performed a hard reset to wipe password, data, etc. Phone boots ok but no calls with cuban SIM.
The curious thing is that it does recognizes Cubacel network, it evens shows the changes on signal intensity. Bu when I try to manually add it, it finds and displays the network by its name, but reports an error when trying to register.
After 3 days of internet search I´ve narrowed to the following: I suspect the phone was unlocked or flashed previously, there is no network promo when turning on the phone but there is chinese rooting software installed and the cell is, or seems via root checker, rooted. Thought an extra /01 after the IMEI was a sign of corruption until I leraned about IMEI SV. Anyway, following this thought installed busybox and root explorer, checked efs folder, finding subfolders such as imei, factory app, etc, BUT NO .NV file. inside imei folder ther is a imeino1 file with the correct imei, but no .nv file outside. Is this fixable?? GSII repair doesnt work because seems theres is an error with the busy box install, what gives me doubts if the phone is really rooted, and if i need to be online to install busybox properly.
So, If I decide to try and flash stock rom and see if this fixes the problem here is my main doubt, which may seem obvious for some but i simply can figure out. Which stock rom version do I choose? the product code of the cell is ITV, and the bootloader also points to the italian version but the currently installed rom ends in AOG2, seemingly a greek version. I live in Cuba and everywhere I look people say that since the telephone is sim free you can install any rom, but the is no "any" or standard rom either in samsung firware o sammobile. Do I flash the same rom? do I flash the one matching the bootloader? Which stock rom version should I choose?
Very much appreciated if you have gone so far in this reading and have some piece of advice. Also excuse terrible English.
Hi !
I see plenty of firmwares on samsung website so pick one and see how it works , it doesn`t matter the region , you won`t damage anything , maybe the modifications that has been made on the device borked the network , clean stock firmware flash may resurrect it and try the one which matches the bootloader
You may have a look here as well https://forum.xda-developers.com/android/development/rom-gennxt-prerooted-stock-t3126368
Good luck !
Hello guys,
I am losing my mind here so I kindly ask for help. I aint no expert in flashing roms or anything, I have a stock Redmi 6 and yesterday I got a pop up about updating my phone. I selected yes and my nightmare begins.
Since then, I cant get the phone to connect via mobile network. I cant get any connectivity of any type using mobile data.
The phone is a Redmi 6, android version is 8.1.0 O11019 and rom is MIUI Global 10.2 Stable 10.2.3.0 (OCGMIXM).
Please help the noob get his phone back, I am about to throw it away
There is an update miui_HM6Global_V10.2.4.0.OCGMIXM_f662ddbe15_8.1.zip
http://ru.miui.com/thread-24171-1-1.html
thanks for your reply, updating to 10.2.4.0.OCGMIXM didnt resolve the issue.
Still no 4G.
Any other ideas? Please I am desperate
Head to" about phone" (in settings ) tap " internal storage " multiple times to enter phone info
Then head over to change network settings to LTE only or enable one with LTE as a possible option if you've disabled it by mistake
Also check which slot your sim is in ...
May not work if sim is in secondary slot and 4g is disabled for it
Let me know if it worked !
Cheers !
Thank you for your reply my friend.
I have tried all these things, they were the obvious ones, so I went with them first. Nothing works, phone is unable to connect to 4G. I have flashed multiple times in case it was a bad flash, I even downgraded to a Developers Rom, but nothing works.
Funniest thing of all, I contacted Xiaomi UK customer services today, and after trying various *# codes, and the guy asking me to turn the phone off and then on again, he ended up saying that I need to wait for the next update.
It is insane
hi everyone, iam looking for specific firmware, wich my device had before i flashed it.. if its possible please advise me where to get it, on original box from phone it says region is : HR, SL, HU, i cant find it anywhere, please if anyone has it or knows where to get it?
so, this phone (h4213) was flashed multiple times with firmwares from different regions, so when i use EMMA to try and restore original firmware emma only shows last 3-4 flashed firmwared nothing before that .. so I was thinking that was the way to restore it but looks like not.. or maybe heres trick to force emma to show all firmwares ever including first original one maybe?
no replys.. so I guess there's no way for me to restore factory original firmware (rom) to this device huh.. ?
well i guess not.. btw is there any software instead of xperia companion(wich doesnt work on unlocked bootloade) that i can use to reciwve sony updates?