[Q] CUBOT ONE - Bricked - Chinese android phone - General Questions and Answers

Hi everybody,
recently i bought phone from China - Cubot ONE. I've been happy with it until i lost signal bars and cant connect to any network. So i google it and i found out how to fix it. Just reflash your firmware with another one. So i could not find any FW for Cubot so i downloaded for Cubot GT99 what is very similar phone and i hoped its would be working. Unfortunetly its didnt work good. After flashing this FW i could not switch on my phone or get to the recovery. I think its probably hard bricked, but iam not sure if its can be fixed when i send it back to supplier or if its any chance to do it by myself... Please iam desperate and i need any advice. Thanks.

what kind or core does Ur phone have?
I have a mtk6575 azense one, and as far today I couldn't find the original rom (i have backup of the original rom)
and I see a "universal mtk6575 rom" on internet, but I dont trust in it. because I read it can be dangerous using a kernel
from other models.
If u cant access to the recovery to flash another you may need to use "Flash tool" with the correct rom it'll fix the bricked status
I also use MTK droid tools
I have my backup but I doubt it will work on yours.

Hello, Thanks for your reply. I already sort that out. I use MTK droid tools to flash older android on my Cubot One. I think its was hard bricked, because i cant switch it on. So i try just put cable in with removed battery and hold down volume down button and after that my windows recognise phone and install driver. So i quickly flash it with stock android v0.3 and its works. But unfortunately still i could not get any network. There show me just no service... I find out that maybe i have lost imei, so i put it back with MTK Android tools. Now i got Imei numbers for both sim cards, it can recoginze my network provider but still ŃO SIGNAL! Could anybody tell me what is wrong now? I have no idea. Thanks anyway for any ideas. Regards.
Its quad core MTK 6589T, 1GB RAM, 8GB Rom, with two sim slots.

Hi,
have you checked this side: http://forum.xda-developers.com/showthread.php?t=2412068
Cheers

Help me!
Hi, I`m new on this website, and realy I don`t speake very wel english, but I have a big big problem, and I don`t know how to post this message, and I find this Post because I think is similar with my china mobile, If anybody see this post please give me a PM or help me on the email address: [email protected] it`s about my China Mobile; LAUDE Pulse S800, please help me somebody! Thank you!

Related

[Q] [Request] someone have an alcatel 918 with single sim backup or preloader?

Well i have the Alcatel 918A phone and i've flashed it on OTU with the 918D, N and Mix versions of this phone (because i wanted to install some ROM and i needed to do that), but now i can't use 3G so i guess that this happens because those phones are the dual sim version and also they are from other areas, So i need the files to flash it back to the single sim version, someone have them?
Thanks in advance and sorry is my english bad, i still have some trouble with it.

[Completed] [Q] Xiaomi Mi2s - No cell signal after IMEI restore.

Hi.
I have a Xiaomi Mi2S that doesn't connect to any cell networks.
I'm using CyanogenMod 11 nightlies, and after an update the phone lost its IMEI number. I had taken a backup of the NVRAM using EFS Professional, but when I looked for it the files where 0 bytes in length (probably a hard disk problem on my computer)
After trying a lot of stuff (installing stock MIUI, putting the phone in diag mode and installing a bunch of drivers), I managed to restore the IMEI number, but the phone still can't connect to the network.
I have tried a SIM from another company and it doesn't work. And my SIM works correctly in other phones, so I think that is not a SIM problem.
I don't know what to do... I tried flashing different ROMS, tried flashing a new baseband radio, but I can't get it to work! Is the phone lost???
Can anyone help me? I would appreciate it very much!!!!
Hi, I can't find anything relevant on XDA for your device and issue.
You can try asking for help from this thread dedicated to your device ,
http://forum.xda-developers.com/showthread.php?t=2274565&page=2
Or if that doesn't help , then from here,
http://forum.xda-developers.com/mi-2/help
Good luck!
Thanks!
Thank you for your help! I have posted in the thread you provided... let's hope that I can find a solution for this. I don't want the Android version of an iPod

[Completed] hi, i was wondering if anyone have a backup nvram of BLU Advance L A010

i recently flashed my phone using sp flash tool but then it would present with an unkown baseband and invalid imei. i used MTK droid tools to restore the nvram and installed an MT6572 baseband called MOLY.WR8.W1315.MD.WG.MP.V36.P4, restored both IMEI's, but it still won't detect my SIM card, doesn't pick up any signal, but oddly it does show my SIM card contacs. WIFI and bluetooth works fine. i was told that i need a baseband version that says P18 for signal to work in my country, if that helps. im new to all this phone situation so i really dont know much, im trying to make the best of it, thanks and have a good day. :fingers-crossed:
Hi !
Here is a good start for solving your problem , there may be more users of this device
https://forum.xda-developers.com/general/rooting-roms/blu-advance-4-0-l-a010u-roms-t3199006
Good luck !

[Completed] Help!! Galaxy J100H not registered on network.

Greetings, sharing here my particular problem from top to bottom just to take advice in general.
First of all, I live in Cuba, so my one and only network is Cubacel which runs GSM 900 mhz, so far so good with most phones.
I am between phones so I boorrowed this used J100h from a friend, which received it as a gift and has never been used. I performed a hard reset to wipe password, data, etc. Phone boots ok but no calls with cuban SIM.
The curious thing is that it does recognizes Cubacel network, it evens shows the changes on signal intensity. Bu when I try to manually add it, it finds and displays the network by its name, but reports an error when trying to register.
After 3 days of internet search I´ve narrowed to the following: I suspect the phone was unlocked or flashed previously, there is no network promo when turning on the phone but there is chinese rooting software installed and the cell is, or seems via root checker, rooted. Thought an extra /01 after the IMEI was a sign of corruption until I leraned about IMEI SV. Anyway, following this thought installed busybox and root explorer, checked efs folder, finding subfolders such as imei, factory app, etc, BUT NO .NV file. inside imei folder ther is a imeino1 file with the correct imei, but no .nv file outside. Is this fixable?? GSII repair doesnt work because seems theres is an error with the busy box install, what gives me doubts if the phone is really rooted, and if i need to be online to install busybox properly.
So, If I decide to try and flash stock rom and see if this fixes the problem here is my main doubt, which may seem obvious for some but i simply can figure out. Which stock rom version do I choose? the product code of the cell is ITV, and the bootloader also points to the italian version but the currently installed rom ends in AOG2, seemingly a greek version. I live in Cuba and everywhere I look people say that since the telephone is sim free you can install any rom, but the is no "any" or standard rom either in samsung firware o sammobile. Do I flash the same rom? do I flash the one matching the bootloader? Which stock rom version should I choose?
Very much appreciated if you have gone so far in this reading and have some piece of advice. Also excuse terrible English.
Hi !
I see plenty of firmwares on samsung website so pick one and see how it works , it doesn`t matter the region , you won`t damage anything , maybe the modifications that has been made on the device borked the network , clean stock firmware flash may resurrect it and try the one which matches the bootloader
You may have a look here as well https://forum.xda-developers.com/android/development/rom-gennxt-prerooted-stock-t3126368
Good luck !

Rino3 pro

My grandson kindly bought me the phone in the title
but it has suddenly lost the ability to identify the sim
cards. I found out after a lot of research that the imei a are invalid, I have managed to root the phone and
tried reinstating the imei using mtk engineering and
tool hero nether of which have worked. I want to try
some other options but need information about,which firmware to use and the appropriate
custom ROM, as I can't find out anything about this momodel phone I am currently stuck can,anyone help
or have any suggestions ?

Categories

Resources