Unfortunately, my Moto X4 today when I go down the stairs from the front door and has suffered a total loss. Unfortunately the Moto X4 does not show anything anymore. It only reacts to the power button. Therefore, unfortunately I have to stop the page. But as soon as I have a device that is just as well represented in the community, I will resume my help there.
If I feel like having time, I'll just upload some files that could help you.
For further ideas or files that I should upload please just let me know. I am always open to constructive criticism and good support. Thank you in advance.
https://drive.google.com/folderview?id=1E_RWH8_jtniuFgSoviQnqeYtuOqE5ACz
---------------------------------------------------------------------------------------
Best Wallpaper page I've been following for a long time.
https://photos.app.goo.gl/LZMyK1ZDFtfJIebg1
AOSiP, crDroid, Ressurection Remix, ViperOS, PixysOS for Paytion un-official download page: https://thestrechh.github.io
The Developer is: Carlos Arriaga (Thank You) https://forum.xda-developers.com/member.php?u=6331811
Liquid Remix un-official download page: https://androidfilehost.com/?w=files&flid=280505
AOSP Extended un-official download page:
https://sourceforge.net/projects/cool585/files/Payton/
Pixel Expieriens official download page: https://download.pixelexperience.org/payton/
Bliss (NOT WORKING!!!) Un-official download page: https://androidfilehost.com/?w=files&flid=288387
Gzosp Un-official download page: https://androidfilehost.com/?w=files&flid=288397
Havoc OS v2.1 Un-official download page: https://androidfilehost.com/?w=files&flid=286655
Arrow: Un-official download page: https://sourceforge.net/projects/cool585/files/Payton/
---------------------------------------------------------------------------------------
Install Custom Roms:
1. Bootloader Unlock
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
2. Boot to TWRP
3. Install copy-partitions-payton.zip
4. Wip Factory Reset
5. Install twrp-installer-payton-3.2.3-1.zip
6. Reboot Recovery
7. Install your Rom
8. Install twrp-installer-payton-3.2.3-1.zip
9. Reboot Recovery
10. Install GApps
11. Install twrp-installer-payton-3.2.3-1.zip
12. REBOOT SYSTEM!
NOT INSTALL MAGISK!
(Do not install Magisk befor you have not booted the first time.)
Nevertheless, an installation error should occur Install one of these floor roms:
flash-all.bat:
https://drive.google.com/file/d/1TS47qYMydmL_DTido6QSaM9-i9c5Q33P/view?usp=drivesdk
Android One:
PAYTON_FI_PPW29.69-26_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
https://drive.google.com/file/d/1ud3f2r-F87sELswZ757I0nGfWrMVyXuL/view?usp=drivesdk
Retail:
PAYTON_RETAIL_9.0_PPW29.69-26_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
https://drive.google.com/file/d/1Y8ZvmFkY2yY1cJohmOROixCHzeci8QKT/view?usp=drivesdk
---------------------------------------------------------------------------------------
Update Custom Rom:
1. Download the Rome and copy it to the external SD card.
2. Reboot to Recovery
3. Install Rom
4. Install Recovery
5. Reboot to Recovery
6. Install GApps
7. REBOOT SYSTEM!
(Never install Magisk before booting! This will cause a bootlop!)
8. Reboot to Recovery
9. Install Magisk and other stuff.
New Uploaded Files 05.01.2019 (dd.mm.yyyy):
ADB & Fastboot
Custom Roms:
---AOSiP-9.0-Pizza-payton-20190105.zip
---AospExtended-v6.1-payton-20181217-0320-UNOFFICIAL.zip
---PixelExperience_payton-9.0-20181208-2312-OFFICIAL.zip
Stock Roms:
---flash-all.bat
---PAYTON_FI_PPW29.69-26_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
---PAYTON_RETAIL_9.0_PPW29.69-26_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Recovery:
---TWRP Boot.bat
---twrp-3.2.3-1-payton.img
---twrp-installer-payton-3.2.3-1.zip
Tools (All Devices):
---QuickSwitch-v1.0.7.zip
---Google_Sans_MOD_Font-v1
---ViPER4Android_FX-v2.3.zip
Root (All Devices):
---Magisk-v18.0.zip
Update: 10.01.2019 (dd.MM.yyyy)
---copy-partitions-payton.zip
Custom Roms:
---AOSiP-9.0-Pizza-payton-20190108.zip
---crDroidAndroid-9.0-20190109-payton-v5.0.zip
---liquid_remix-10.0.2-20181220-UNOFFICIAL-payton.zip
All Devices:
GApps:
---open_gapps-arm64-9.0-aroma-20181229.zip
Seeing crDroid now available makes me think really hard about finally unlocking my phone.....
jbaumert said:
Seeing crDroid now available makes me think really hard about finally unlocking my phone.....
Click to expand...
Click to collapse
hope I can help with some screenshots. crDroid ist my daily driver. That's the best Rom.
https://photos.app.goo.gl/1K8f7maD88EeBZis6
Bootloader Unlock:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Update: 11.01.2019 (dd.MM.yyyy)
Cusom Rom:
---crDroidAndroid-9.0-20190111-payton-v5.0.zip
Screenshot:
https://photos.app.goo.gl/1K8f7maD88EeBZis6
Un-official download page:
https://thestrechh.github.io
Just curious, have you thought about joining the crDroid team as a maintainer and make your builds official?
jbaumert said:
Just curious, have you thought about joining the crDroid team as a maintainer and make your builds official?
Click to expand...
Click to collapse
I will gladly become the maintainer of crDroidAndroid. But I also have to say that I am doing this for the first time and that I do not have much experience yet. But with a bit of work on my part, I hope to learn all that is needed as soon as possible.
But so that no misunderstandings occur. I'm not the developer of the builds. I can only work as a supervisor.
The Developer is:
Carlos Arriaga
https://forum.xda-developers.com/member.php?u=6331811
Update 13.01.2019 (dd.MM.yyyy):
Custom Rom:
---PixysOS-v2.4-payton-UNOFFICIAL-20190113-0221.zip
Un-official download page: https://thestrechh.github.io
---AospExtended-v6.2-payton-20190112-1101-UNOFFICIAL.zip
Un-official download page: https://sourceforge.net/projects/cool585/files/Payton/
---PixelExperience_payton-9.0-20190109-1812-OFFICIAL.zip
Official download page: https://download.pixelexperience.org/payton/
Update 14.01.2019 (dd.MM.yyyy):
Custom Rom:
---Gzosp-payton-9.Beta.2.0-UNOFFICIAL-20190109-0618.zip
Un-official download page: https://androidfilehost.com/?w=files&flid=288397
---Havoc-OS-v2.1-20190113-payton-Unofficial.zip
Un-official download page: https://androidfilehost.com/?w=files&flid=286655
---Arrow-v9.0-payton-UNOFFICIAL-20190111.zip
Un-official download page: https://sourceforge.net/projects/cool585/files/Payton/
Unfortunately, my Moto X4 today when I go down the stairs from the front door and has suffered a total loss. Unfortunately the Moto X4 does not show anything anymore. It only reacts to the power button. Therefore, unfortunately I have to stop the page. But as soon as I have a device that is just as well represented in the community, I will resume my help there.
CLOSED!
That really is a kickass collection of wallpapers. Thanks man!!!
Related
[ROM][5.1.1][Official] PA 5.1 R7plus (Qualcomm)
Features:
1. All PA features.
2. Full Fingerprint support ported from CM.
How flash:
1. Unlock the Bootloader (Fastboot Mode = Vol. Up + Power)(Command: fastboot oem unlock).
2. Flash a custom recovery (see below)(Command: fastboot flash recovery name.recovery.img).
3. Download PA ROM & GApps and copy to microSD card.
4. Reboot in Recovery Mode (Vol. Down + Power).
5. Do a Full Wipe (will delete everythings so make a copy of your file to the microSD card).
6. Flash PA ROM.
7. Flash GApps.
8. Reboot the phone and wait (the first time will take a bit of time).
Links:
1. PA ROM: Latest Nightly: http://downloads.hostingsharedbox.com/.jumoog/r7/pa_r7plus-5.1-20151103.zip
2. GApps: OpenGApps (select: ARM64 >> 5.1 >> Choice the package you want): http://opengapps.org/
3. Recovery: CyanogenMod Recovery or TWRP: https://download.cyanogenmod.org/?device=r7plus | https://dl.twrp.me/r7plusf/twrp-2.8.7.2-r7plusf.img
Changelog:
23.10.2015:
1. First release.
24.10.2015:
1. Everything runs extremly smooth.
25.10.2015:
1. Add fingerprint translation.
03.11.2015:
1. Fixed unknow apps toggle.
2. Fixed Security Issues.
Thanks.
Best Regards,
Mulham Darwish
hello mate, are you a developer of this rom? I was testing the latest build and there were no PA features as stated. Not even chance to change SW buttons to order you want.
Has anybody tried flashing this and have any feedback on it? Any bugs or issues? With being a stock Android rom I would figure this would get more comments and feedback? Or is this a troll post? No disrespect to op.
marcviado said:
Has anybody tried flashing this and have any feedback on it? Any bugs or issues? With being a stock Android rom I would figure this would get more comments and feedback? Or is this a troll post? No disrespect to op.
Click to expand...
Click to collapse
I don't have test it but I confirm you that this ROM isn't a fake. The official thread is on OPPO Community and his author is jumoog
P.S. In the official thread you can find the update link, search in the various reply (if I remember correctly, the latest version is 11/13)
Nexus5-32GB said:
hello mate, are you a developer of this rom? I was testing the latest build and there were no PA features as stated. Not even chance to change SW buttons to order you want.
Click to expand...
Click to collapse
No I am not, I just saw this post in the OPPO Official Website.
Thanks.
DISCLAIMER: This thread has roms and recoverys only for phones with KK firmware!
So since there are so many questions about this phone, decided to make a noob-friendly thread for this Allview phone.
So, let's get started.
1. Root
Use KingoRoot. :silly:
2. Recovery
TWRP: https://drive.google.com/file/d/0B8vM7vVkqPFNS2RaTUJfMURZajg/view?usp=sharing
How to flash:
1. Get Flashify from Play Store.
2. Select Flash Recovery Image.
3. Use the .img you downloaded. (Rename as recovery.img first)
4. Click Yup!
5. After it's done, reboot to recovery and enjoy!
3. ROMs
- Resurrection Remix 5.7.3 (MM): https://drive.google.com/open?id=0B1cB-D2E1BLlbUo0engtcFA2WEU
-Ported by Gabriel Catafane (Bugless)
- Dirty Unicorns (MM): https://drive.google.com/open?id=0B4QYYH0hH9eBYWRFOURiMlozRzQ
-Ported by ???
- PacRom (LL): https://drive.google.com/file/d/0B8CEEWEzdUmEbUtNT0lvdnRTQVk/view
-Ported by Iacob Ionu? (Bugless)
- Silm6 (MM): Unavailble YET.
-Ported by me
- CyanogenMod13 (MM): Unavailble YET.
-Ported by me
More coming soon...
How to flash:
1. Reboot to recovery. (Custom recovery needed, obviously)
2. Wipe /system, /data and /cache.
3. Install the .zip.
4. Install GApps afterwards.
5. Reboot.
6. Profit.
FAQ
-What's the difference between KK Stock and LP Stock?
-Different kernel, mostly.
-How do I get stock KK/LP on my phone?
-Flash the stock KK/LP firmware from the official Allview site. They also provide instructions. :victory:
-Where to find GApps?
-Here: https://www.opengapps.org (select arm, your android version and pico, then download.)
Credits:
-Iacob Ionu?, Gabriel Catafene and other non-XDA fellas from the p6life facebook group.
-Me for guides, some roms, and this post.
link
link lose. thx
Android 8.0 Oreo - Now in Development
Lineage for Oppo F1 (f1f)
LineageOS is a free and open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is the successor to the highly popular custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
Instructions
For Installing
1. Unlock root.
2. Download the latest TWRP, build, and GApps.
3. Install/unlock TWRP.
4. Reboot to TWRP recovery.
5. Wipe System, Data, Cache, and Dalvik.
6. Flash the build, and GApps respectively.
7. Flash patches if available.
8. Wipe cache and dalvik.
9. Reboot to system, and enjoy.
Note: If you have 'already installed' Lineage, and want to update your build, use the instructions below.
For Updating Build (Clean Flash)
1. Download the latest build and GApps.
2. Reboot to TWRP recovery.
3. Wipe System, Data, Cache, and Dalvik.
4. Flash the build, and GApps respectively.
5. Flash patches if available.
6. Wipe cache and dalvik.
7. Reboot to system, and enjoy.
For Updating Build (Dirty Flash)
1. Download the latest build.
2. Reboot to TWRP recovery.
3. Flash the build.
4. Flash patches if available.
5. Wipe cache and dalvik.
6. Reboot to system, and enjoy.
For Updating TWRP
1. Download the latest TWRP.
2. Reboot to TWRP recovery.
3. Flash the TWRP update.
4. Wipe cache and dalvik.
5. Reboot to system, and enjoy.
For Unlocking
1. Download magictricks.zip.
2. Go to stock recovery, then install/flash magictricks.zip
3. Reboot to fastboot, then connect phone to pc.
4. Setup adb shell in Windows.
5. Lunch CMD.
6. Install adb drivers for oppo f1f.
7. Type "cd c:\adb" then enter.
8. Type "adb devices" then enter.
9. You should see your device in the list, if not, go back to step six.
10. Put TWRP flashable zip to c:\adb (rename as twrp.img).
11. Type "fastboot oem unlock" then enter.
12. Type "fastboot flash recovery twrp.img" then press enter.
13. After, disconnect phone then reboot to TWRP.
14. Flash img/zips what you want.
Downloads
TWRP: download link
OpenGApps: download link
Unlocker: download link
ADB Installer: download link
ADB Extract: download link
For the builds, see below.
Version Information
Latest Stable Version
Build: 14.1-2017XXXX-UNOFFICIAL-f1f
Android Version: 7.1.1 Nougat
Latest Beta Version
Build: 15.0-2017XXXX-UNOFFICIAL-f1f
Android Version: Android 8.0 Oreo
OpenGApps Version
Platform: ARM64
Android: 7.1 (stable) or 8.0 (beta)
Variant: Stock (recommended)
Android 8.0 Oreo (In Development)
Downloads
Lineage 15 based on Android Oreo Source Code: Link
Notes for Android Oreo Development
Lineage 15 based on Android Oreo Source Code is the one we will need to port.
Android 7.1 Nougat (Old)
Downloads
Build: download link
Patch (Auto Rotation and Navigation Bar): download link
Patch (Kernel): download link
Add-ons
Temporary Camera: download link
Temporary Torch: download link
Known Bugs
The bugs listed here are bugs from the latest nougat build.
1. Camera crashes.
2. Torch toggle don't work.
3. Battery non-accuracy.
4. Hotspot Issue.
FAQ
Q1: What's the difference between updating build "Cleaand "Dirty Flash"?
Clean flash - removes all your files then install the update. Dirty flash - updates your build without removing your files.
Q2: When will you release the next stable build?
See "Version Information" in this thread.
Q3: Can I try the latest beta version?
Yes, if granted by developers of this thread. No, if not.
Q4: Did you already fix the bugs present in the latest stable build?
See "Known Bugs" in this thread.
Q5: What's better for updating build? Clean flash or Dirty flash?
I recommend dirty flash. Only use clean flash when you can't update build properly.
Q6: What's the difference between this thread and other threads.
This thread is for "DEVELOPMENT and FULL GUIDE for 'UNLOCKING, RECOVERIES, KERNELS, ROMS, and OPENGAPPS' for Oppo F1 (f1f)".
Credits, Sources
Developers and contributors:
@kdd998
Android 7.1 Build
@MiniBlu
Android 7.1 Kernel Patch
@khannz7
Android 7.1 Auto Rotation and Navigation Bar Patch
@Earthy
Instructions/Guides
Android 7.1 Add-ons
@ TWRP
TWRP
@ OpenGApps
OpenGApps
@ Lineage Github Repo
LineageOS 14.1
LineageOS 15.0
@ AOSP
Android Nougat Source Code
Android Oreo Source Code
and the community.
For those who want to help building builds for this rom, and for those have knowledge about building builds, just reply to this thread. We will cooperate and share knowledge with each other, so we can build a build faster, better, and more stable. Just teamwork.
Notes
Bug report:
For bug report, just reply to this thread.
Keep up-to-date here, this first thread post change info over from time to time. This thread is last updated: 00:00 PM, Mon-Sun, Jan-Dec 00 2017 (GMT+8).
Reserved 1 out of 9.
Reserved 2 out of 9.
Reserved 3 out of 9.
Reserved 4 out of 9.
Reserved 5 out of 9.
Reserved 6 out of 9.
Reserved 7 out of 9.
Reserved 8 out of 9.
Reserved 9 out of 9.
https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.
Jamie_oppo said:
https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.
Click to expand...
Click to collapse
Here's the Lineage 15 Source Code.
https://github.com/LineageOS/android_vendor_lineage
Earthy said:
Here's the Lineage 15 Source Code.
https://github.com/LineageOS/android_vendor_lineage
Click to expand...
Click to collapse
Yeah but you still need a los15.0 branch for the f1f device tree. Which isn't available and won't be for a long time
Jamie_oppo said:
https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.
Click to expand...
Click to collapse
Jamie_oppo said:
Yeah but you still need a los15.0 branch for the f1f device tree. Which isn't available and won't be for a long time
Click to expand...
Click to collapse
We don't need to wait if we will build our own branch for the f1f device tree. And actually, we are the one should make it because we are the only who develops ROM for this. And also common sense to know that "the one who develop the ROMs should make everything needed here like kernel, branch that you're saying, etc.".
?
Earthy said:
We don't need to wait if we will build our own branch for the f1f device tree. And actually, we are the one should make it because we are the only who develops ROM for this. And also common sense to know that "the one who develop the ROMs should make everything needed here like kernel, branch that you're saying, etc.".
Click to expand...
Click to collapse
Well I have my doubt's. Prove me wrong. I would have no idea how to do this.
Also I think a group collaboration would be better. One person would just be too much work.
Good luck anyway
@MiniBlu, there's your credit. :angel:
@Earthy it is obvious none of this is your work. I personally don't see a camera fix as reason enough for you to repackage someone else's work and release it yourself. Under XDA rule:
12-3. Re-releasing other's works as your own is forbidden. The code that you release into the wild must have something beyond minor aesthetic changes that makes it better than the last. As this can be subjective, kang reports will be reviewed on a case by case basis. If you feel that your code has been kanged, please contact the Dev Relations team (listed below) if you cannot solve the issue amicably via PM. Please understand that you will be asked to provide evidence to substantiate your claim;
Click to expand...
Click to collapse
Thread closed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download-Links:
ROM: https://dwnld.aicp-rom.com/
TWRP: https://github.com/CaptainThrowback/android_device_htc_hima/releases
GAPPS: https://opengapps.org/?arch=arm64&api=10.0
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
What's working
-wifi
-mobile data
-camera
-bluetooth
-NFC
-audio
-DT2W
-DT2S
-AICP Themes
-GPS
-Encryption
-FlipFlap
-mobile data signal strength
What's not working
You tell us!
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk canary
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_htc_msm8994
Device tree source:
https://github.com/AICP/device_htc_hima
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds[/B]
Contributors:
@Claymore1297
@k4y0z
@eyosen
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 10.0 Android 10
Kernel: Linux 3.10.108
Requirements
HTC Firmware: 4.x
TWRP: 3.3.1
Version Information:
Status: BETA
Release Date: 14-09-2019
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP 15.0, ROM for the HTC One (M9)
Contributors
Claymore1297, eyosen, k4y0z
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-09-14
Last Updated 2020-11-01
new vendor-partition
We are introducing in Android 10 a vendor partitionon hima. So please follow the OP and install the linked TWRP, til @Captain_Throwback will release a official version.
So hima is not treble, but has a smell of treble
Also please note, that android Q introduces System-As-Root (SAR), so flashing GAPPS will only work properly with the linked TWRP.
There is also a GAPPS linked that will work with Q until official GAPPS are released.
*reserved3*
Reserved #4
Thanks
"The ROM should contain everything you need to enjoy Android Pie."
Please fix the Pie name ...
I currently use AICP 14 Does the procedure detailed in the OP help me to update safely?
How stable is this version?
PS: Thanks for the hard work.
Thanks so much for your hard work, keep up :good:
shadowalker2014 said:
Thanks so much for your hard work, keep up :good:
Click to expand...
Click to collapse
we worked now 4 days + nights without break, so thanks!
there is a warning after the device has been boot up - you can just ignore this for now!
Ok thanks, will give it a go when I got back home ?
Claymore1297 said:
there is a warning after the device has been boot up - you can just ignore this for now!
Click to expand...
Click to collapse
Did I really need your twrp ,since I installed it I've been getting this msg while trying to flash the new beta unfortunately
**Forgot pic**
DaveedDB said:
Did I really need your twrp ,since I installed it I've been getting this msg while trying to flash the new beta unfortunately
Click to expand...
Click to collapse
The old TWRP should work OK for installing the ROM, but it won't work for Backup/Restore and installing GAPPS etc.
So it's advised to update to this version.
EDIT:
Just saw your pic.
You're trying to flash the wrong ROM.
This is for himaul, you have a himawl
Head here
k4y0z said:
The old TWRP should work OK for installing the ROM, but it won't work for Backup/Restore and installing GAPPS etc.
So it's advised to update to this version.
EDIT:
Just saw your pic.
You're trying to flash the wrong ROM.
This is for himaul, you have a himawl
Head here
Click to expand...
Click to collapse
Just realized as well thanks
Thank you very much
Just installed this version and so far everything super good , without complaints of any kind. There really is no way to thank you enough for the hard work you have developed, and in such a short time as well.
I am Spanish speaker, excuse my Google Translator English .
Claymore1297 said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download-Links:
ROM: https://mirror.codebucket.de/claymore1297/AICP/15.0/himaul/
TWRP: https://mirror.codebucket.de/claymore1297/TWRP/
GAPPS: https://mirror.codebucket.de/claymore1297/GAPPS/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Whats working
-wifi
-mobile data
-camera
-bluetooth
-NFC
-audio
-DT2W
-AICP Themes
Whats working
- mobile data signal strength
- encryption
-gps
-DT2S
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 17.2 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_htc_msm8994
Device tree source:
https://github.com/AICP/device_htc_hima-common
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds[/B]
Contributors:
@Claymore1297
@k4y0z
@eyosen
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 10.0 Android 10
Kernel: Linux 3.10.108
Requirements
HTC Firmware: 4.x
TWRP: 3.3.0
Version Information:
Status: BETA
Release Date: 14-09-2019
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP 15.0, ROM for the HTC One (M9)
Contributors
Claymore1297, eyosen, k4y0z
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2019-09-14
Last Updated 2019-09-14
Click to expand...
Click to collapse
I can't seem to install magisk, I'm on v19.3 and it installs with no errors. However after a reboot the phone will show the HTC logo, then restart.
As in, the logo will display but it wont get to the ROM boot animation, just reboot and display the HTC logo again as if there was no ROM installed.
NoChill said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
I can't seem to install magisk, I'm on v19.3 and it installs with no errors. However after a reboot the phone will show the HTC logo, then restart.
As in, the logo will display but it wont get to the ROM boot animation, just reboot and display the HTC logo again as if there was no ROM installed.
Click to expand...
Click to collapse
Me too. In addition to that just after the system boot successfully it gives me an error message saying that my device has an internal fault and to contact the manufacturer.
ayoobelmasry said:
Me too. In addition to that just after the system boot successfully it gives me an error message saying that my device has an internal fault and to contact the manufacturer.
Click to expand...
Click to collapse
The error message is known issue u can just ignore it.
ayoobelmasry said:
Me too. In addition to that just after the system boot successfully it gives me an error message saying that my device has an internal fault and to contact the manufacturer.
Click to expand...
Click to collapse
Read previous page ,op said ignore for now
After installing the custom twrp, I can't wipe data, cache, and dalvik because of the error message: "failed to mount /carrier (invalid arguement)"
What do I have to do guys?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
Pixel Experience Team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
On Clean Flash: mandatory for first install !!!At the beginning, if you are on Stock OOS 11 ROM with locked bootloader, please follow the instructions for unlocking bootloader here: https://wiki.lineageos.org/devices/instantnoodle/install
1. Download the ROM and GApps to your PC with proper adb & fastboot setup.
Also download to your PC instantnoodle-recovery.img from HERE
2. Boot to bootloader and run in cmd (windows) / terminal (linux)
fastboot flash recovery instantnoodle-recovery.img
4. Boot to recovery. Tap on Factory Reset (this will erase everything on your device) then return to main menu
3. Connect your device to your PC and tap on Apply Update -> Apply from ADB and
4. Flash the ROM zip file using
adb sideload aicp_instantnoodle_r-16.1-WEEKLY-{date}.zip
5. Once its finished, reboot to recovery to flash the GApps (optional, needed for e.g. Google Playstore to work). This is mandatory becoz will switch automatically current slot and will flash GAPPS.
Once it boots to recovery, tap on Apply Update -> Apply from ADB then run
adb sideload GAPPS.zip
6. Reboot and set up your device.
7. Reboot back into recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The main workflow for flashing via recovery:
reboot to recovery -> adb sideload ROM.zip -> reboot recovery -> adb sideload GAPPS.zip -> reboot to system
Click to expand...
Click to collapse
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 21.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
Go to Aicp Extras -> Update Centre then install new Weekly Build.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source: We are building Neutrino Kernel adopted to our sources with permission by Kernel Dev
GitHub - AICP/kernel_oneplus_sm8250
Contribute to AICP/kernel_oneplus_sm8250 development by creating an account on GitHub.
github.com
Device tree source:
AICP/device_oneplus_instantnoodle
Device tree for OnePlus 8. Contribute to AICP/device_oneplus_instantnoodle development by creating an account on GitHub.
github.com
Common device tree source:
GitHub - AICP/device_oneplus_sm8250-common
Contribute to AICP/device_oneplus_sm8250-common development by creating an account on GitHub.
github.com
Vendor source:
AICP/proprietary_vendor_oneplus
Contribute to AICP/proprietary_vendor_oneplus development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Join us on our Discord Channel
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long xD)
Information:[/U[
ROM OS Version: 11.1
Kernel: Linux 4.19.176
ROM {Firmware|Vendor} OnePlus8Oxygen_15.E.35_OTA_0350.
Status: {STABLE}
Release Date: 04-03-2021
You want to see a "normal" night at the "DEV office", click here!!
AICP recovery: link HERE
---------------------------------------------------------------------------------------------------------------
New build guys
10.04.2021 UPDATE
Download aicp_instantnoodle_r-16.1-WEEKLY-20210410.zip from HERE
Changelog: link HERE
No GAPPS in the ROM.zip.
** İf you are comming from older version - no need to flash clean.
-- if you are rooted: Just go to Updater in AicpExtras choose the downloaded zip from your storage and install the update.
-- if you aren't rooted:
**** Download the zip. Connect your phone to your PC. and run adb root in terminal (or cmd windows for Win). Then run adb shell setenforce 0 and install downloaded zip as local upgrade from Updater in AicpExtras. You'll be on enforcing selinux mode after reboot
-- You can flash in recovery via adb sideload. İf you choose this way, don't forget to reboot to recovery and flash your GAPPS.zip via adb sideload again.
-- if you want to clean flash:
**** reboot to recovery. Format data then follow the procedure given below:
flash rom.zip via adb sideload -> reboot recovery -> flash gapps.zip via adb sideload -> reboot to system
What's new:
1. April '21 ASB merged
2. Added ALipay fingerprint payment support
3. Screenbrightness fixes for all 3 devices
4. Many fixes including SafetyNet (fixed again)
Enjoy !!!
---------------------------------------------------------------------------------------------------------------
04.04.2021 Build !!!
Download aicp_instantnoodle_r-16.1-WEEKLY-20210404.zip from HERE.
Changelog: link HERE.
-- There is no GAPPS in the ROM.zip.Download GAPPS from:
MindTheGapps or OpenGapps Android 11 Nano
How to install:
1. Go to recovery. Format data if you want to flash clean.
2. Apply Update from ADB
3. then adb sideload aicp_instantnoodle_r-16.1-WEEKLY-20210404.zip
4. Reboot to recovery
5. Flash Gapps via adb sideload GAPPS.zip
** İmportant: Android Auto fails to connect with OpenGapps. All good with MindTheGapps
** There is no DevicePersonalization app in these - if you want, I can provide a modified GAPPS package
6. If you want to switch in between GAPPS packages, just flash other GAPPS package on the new flash. Clean flash isn't trivial, but recommended....
*** Next flashes can go through Updater or adb sideload.
** If you flash via Updater, backup tool will handle your gapps - no need to reflash them again.
** GAPPS need to be flashed on every update if you flash via adb sideload. Flash them as it is described above.
What's new?
** Stock vibration patterns are back
** App Lock from AOSP-A
** Neutrino Kernel updated to 4.19.183
** and many more....
All feedbacks are appreciated, as always.
Cheerz
---------------------------------------------------------------------------------------------------------------
For those who want to ROOT their devices:
Download Magisk 21.4 zip: link HERE
** boot to recovery
** flash via adb sideload magisk.zip:
** reboot.
** Note that you HAVE to do this on every update.
** SafetyNet is fixed on March 5 build !!!
Enjoy !!
Which Camera we can use:
1. Using this Camera: GCam_7.3.018_Urnyx05-v2.1_Wichaya_V3.1.1_snapcam.apk
2. Also I have thix xml file under GCam/Configs7 : nrG Wichaya 7.3.018_v3.1.1.xml
finally! thanks
Very nice. Quick question. Are Verizon a11 blobs merged ? No custom rom currently gets data for us Verizon op8 users?
mattie_49 said:
Very nice. Quick question. Are Verizon a11 blobs merged ? No custom rom currently gets data for us Verizon op8 users?
Click to expand...
Click to collapse
No unfortunately. Doubt it'll work on Verizon.
semdoc said:
No unfortunately. Doubt it'll work on Verizon.
Click to expand...
Click to collapse
Thanks for quick response. I'm gonna try later anyway. He he. Why is it so hard for us to get data/signal on custom roms. Qti telephony ? Or the 5g modem that gets mm wave?
mattie_49 said:
Thanks for quick response. I'm gonna try later anyway. He he. Why is it so hard for us to get data/signal on custom roms. Qti telephony ? Or the 5g modem that gets mm wave?
Click to expand...
Click to collapse
most likely qti telephony....
Rebuilt and re-uploaded initial build. The issue was broken adb sideload . Now fixed and all should be fine.
Download aicp_instantnoodle_r-16.1-WEEKLY-20210305.zip from HERE
Cheers.
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
passion8059 said:
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
Click to expand...
Click to collapse
Will check it out Thanx for feedback
passion8059 said:
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
Click to expand...
Click to collapse
Can you please test this build:
Download aicp_instantnoodle_r-16.1-WEEKLY-20210307.zip from HERE
** Attempt to fix audio ssues.
If you are rooted: Just download the build to your device. Choose from AicpExtras -> Updater and flash after choosing from right upper corner.
If you aren't rooted:
1. go to recovery and flash via adb sideload and reboot.
All feeedbacks are appreciated.
semdoc said:
Can you please test this build:
Download aicp_instantnoodle_r-16.1-WEEKLY-20210307.zip from HERE
** Attempt to fix audio ssues.
If you are rooted: Just download the build to your device. Choose from AicpExtras -> Updater and flash after choosing from right upper corner.
If you aren't rooted:
1. go to recovery and flash via adb sideload and reboot.
All feeedbacks are appreciated.
Click to expand...
Click to collapse
Will update and report back accordingly. Thanks
passion8059 said:
Will update and report back accordingly. Thanks
Click to expand...
Click to collapse
Have tried video call today, mic seems to be fixed but on max volume (I have 2 young boys who won't be quiet ;-)) it still distorts so have to knock it down a bit and struggle to hear what is being said.
passion8059 said:
Have tried video call today, mic seems to be fixed but on max volume (I have 2 young boys who won't be quiet ;-)) it still distorts so have to knock it down a bit and struggle to hear what is being said.
Click to expand...
Click to collapse
LUK merged fixes for all 3 op8 devices today...
So you'll get test builds later today...
hello what interests me can we record the conversation natively?
doc411 said:
hello what interests me can we record the conversation natively?
Click to expand...
Click to collapse
Yes, we have that option in our Dialer.
semdoc said:
Yes, we have that option in our Dialer.
Click to expand...
Click to collapse
thank you very much for your quick rest
New build guys.
You can download aicp_instantnoodle_r-16.1-WEEKLY-20210309.zip from HERE.
-- Please test audio, calls - including whatsapp & telegram calls in all aspects..
-- OOS Style Clear all notificaitons button added
-- Kernel Update by Neutrino kernel dev.
Changelog: link HERE
Cheerz guys
Thanks for the update. Ringing at max is distorted still and there is a severe memory lag where you watch YouTube videos it'll play but then buffer then play again. I'm on a good broadband connection (500mb) and WiFi 6 coverage. Have cleared caches and used ex kernel manager to clear memory buffers but still the same.