[DEV] [GUIDE] LineageOS for Oppo F1 (f1f)

[DEV] [GUIDE] LineageOS for Oppo F1 (f1f) - Oppo F1

Android 8.0 Oreo - Now in Development
Lineage for Oppo F1 (f1f)
LineageOS is a free and open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is the successor to the highly popular custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
Instructions
For Installing
1. Unlock root.
2. Download the latest TWRP, build, and GApps.
3. Install/unlock TWRP.
4. Reboot to TWRP recovery.
5. Wipe System, Data, Cache, and Dalvik.
6. Flash the build, and GApps respectively.
7. Flash patches if available.
8. Wipe cache and dalvik.
9. Reboot to system, and enjoy.
Note: If you have 'already installed' Lineage, and want to update your build, use the instructions below.
For Updating Build (Clean Flash)
1. Download the latest build and GApps.
2. Reboot to TWRP recovery.
3. Wipe System, Data, Cache, and Dalvik.
4. Flash the build, and GApps respectively.
5. Flash patches if available.
6. Wipe cache and dalvik.
7. Reboot to system, and enjoy.
For Updating Build (Dirty Flash)
1. Download the latest build.
2. Reboot to TWRP recovery.
3. Flash the build.
4. Flash patches if available.
5. Wipe cache and dalvik.
6. Reboot to system, and enjoy.
For Updating TWRP
1. Download the latest TWRP.
2. Reboot to TWRP recovery.
3. Flash the TWRP update.
4. Wipe cache and dalvik.
5. Reboot to system, and enjoy.
For Unlocking
1. Download magictricks.zip.
2. Go to stock recovery, then install/flash magictricks.zip
3. Reboot to fastboot, then connect phone to pc.
4. Setup adb shell in Windows.
5. Lunch CMD.
6. Install adb drivers for oppo f1f.
7. Type "cd c:\adb" then enter.
8. Type "adb devices" then enter.
9. You should see your device in the list, if not, go back to step six.
10. Put TWRP flashable zip to c:\adb (rename as twrp.img).
11. Type "fastboot oem unlock" then enter.
12. Type "fastboot flash recovery twrp.img" then press enter.
13. After, disconnect phone then reboot to TWRP.
14. Flash img/zips what you want.
Downloads
TWRP: download link
OpenGApps: download link
Unlocker: download link
ADB Installer: download link
ADB Extract: download link
For the builds, see below.
Version Information
Latest Stable Version
Build: 14.1-2017XXXX-UNOFFICIAL-f1f
Android Version: 7.1.1 Nougat
Latest Beta Version
Build: 15.0-2017XXXX-UNOFFICIAL-f1f
Android Version: Android 8.0 Oreo
OpenGApps Version
Platform: ARM64
Android: 7.1 (stable) or 8.0 (beta)
Variant: Stock (recommended)
Android 8.0 Oreo (In Development)
Downloads
Lineage 15 based on Android Oreo Source Code: Link
Notes for Android Oreo Development
Lineage 15 based on Android Oreo Source Code is the one we will need to port.
Android 7.1 Nougat (Old)
Downloads
Build: download link
Patch (Auto Rotation and Navigation Bar): download link
Patch (Kernel): download link
Add-ons
Temporary Camera: download link
Temporary Torch: download link
Known Bugs
The bugs listed here are bugs from the latest nougat build.
1. Camera crashes.
2. Torch toggle don't work.
3. Battery non-accuracy.
4. Hotspot Issue.
FAQ
Q1: What's the difference between updating build "Cleaand "Dirty Flash"?
Clean flash - removes all your files then install the update. Dirty flash - updates your build without removing your files.
Q2: When will you release the next stable build?
See "Version Information" in this thread.
Q3: Can I try the latest beta version?
Yes, if granted by developers of this thread. No, if not.
Q4: Did you already fix the bugs present in the latest stable build?
See "Known Bugs" in this thread.
Q5: What's better for updating build? Clean flash or Dirty flash?
I recommend dirty flash. Only use clean flash when you can't update build properly.
Q6: What's the difference between this thread and other threads.
This thread is for "DEVELOPMENT and FULL GUIDE for 'UNLOCKING, RECOVERIES, KERNELS, ROMS, and OPENGAPPS' for Oppo F1 (f1f)".
Credits, Sources
Developers and contributors:
@kdd998
Android 7.1 Build
@MiniBlu
Android 7.1 Kernel Patch
@khannz7
Android 7.1 Auto Rotation and Navigation Bar Patch
@Earthy
Instructions/Guides
Android 7.1 Add-ons
@ TWRP
TWRP
@ OpenGApps
OpenGApps
@ Lineage Github Repo
LineageOS 14.1
LineageOS 15.0
@ AOSP
Android Nougat Source Code
Android Oreo Source Code
and the community.
For those who want to help building builds for this rom, and for those have knowledge about building builds, just reply to this thread. We will cooperate and share knowledge with each other, so we can build a build faster, better, and more stable. Just teamwork.
Notes
Bug report:
For bug report, just reply to this thread.
Keep up-to-date here, this first thread post change info over from time to time. This thread is last updated: 00:00 PM, Mon-Sun, Jan-Dec 00 2017 (GMT+8).

Reserved 1 out of 9.

Reserved 2 out of 9.

Reserved 3 out of 9.

Reserved 4 out of 9.

Reserved 5 out of 9.

Reserved 6 out of 9.

Reserved 7 out of 9.

Reserved 8 out of 9.

Reserved 9 out of 9.

https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.

Jamie_oppo said:
https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.
Click to expand...
Click to collapse
Here's the Lineage 15 Source Code.
https://github.com/LineageOS/android_vendor_lineage

Earthy said:
Here's the Lineage 15 Source Code.
https://github.com/LineageOS/android_vendor_lineage
Click to expand...
Click to collapse
Yeah but you still need a los15.0 branch for the f1f device tree. Which isn't available and won't be for a long time

Jamie_oppo said:
https://github.com/LineageOS/android_device_oppo_f1f
You can't do anything until there's a cm15 branch anyway.
You can try and port to our device from another device if you want.
There's still actually no new links in this thread. Its all other peoples work. U say u have a beta but havent posted anything. Try and help the other dev fix the sound in the nougat kernel. Instead of just posting other peoples work here.
Click to expand...
Click to collapse
Jamie_oppo said:
Yeah but you still need a los15.0 branch for the f1f device tree. Which isn't available and won't be for a long time
Click to expand...
Click to collapse
We don't need to wait if we will build our own branch for the f1f device tree. And actually, we are the one should make it because we are the only who develops ROM for this. And also common sense to know that "the one who develop the ROMs should make everything needed here like kernel, branch that you're saying, etc.".

?
Earthy said:
We don't need to wait if we will build our own branch for the f1f device tree. And actually, we are the one should make it because we are the only who develops ROM for this. And also common sense to know that "the one who develop the ROMs should make everything needed here like kernel, branch that you're saying, etc.".
Click to expand...
Click to collapse
Well I have my doubt's. Prove me wrong. I would have no idea how to do this.
Also I think a group collaboration would be better. One person would just be too much work.
Good luck anyway

@MiniBlu, there's your credit. :angel:

@Earthy it is obvious none of this is your work. I personally don't see a camera fix as reason enough for you to repackage someone else's work and release it yourself. Under XDA rule:
12-3. Re-releasing other's works as your own is forbidden. The code that you release into the wild must have something beyond minor aesthetic changes that makes it better than the last. As this can be subjective, kang reports will be reviewed on a case by case basis. If you feel that your code has been kanged, please contact the Dev Relations team (listed below) if you cannot solve the issue amicably via PM. Please understand that you will be asked to provide evidence to substantiate your claim;
Click to expand...
Click to collapse
Thread closed

Related

OPPO R7 Plus PA ROM 5.1

[ROM][5.1.1][Official] PA 5.1 R7plus (Qualcomm)
Features:
1. All PA features.
2. Full Fingerprint support ported from CM.
How flash:
1. Unlock the Bootloader (Fastboot Mode = Vol. Up + Power)(Command: fastboot oem unlock).
2. Flash a custom recovery (see below)(Command: fastboot flash recovery name.recovery.img).
3. Download PA ROM & GApps and copy to microSD card.
4. Reboot in Recovery Mode (Vol. Down + Power).
5. Do a Full Wipe (will delete everythings so make a copy of your file to the microSD card).
6. Flash PA ROM.
7. Flash GApps.
8. Reboot the phone and wait (the first time will take a bit of time).
Links:
1. PA ROM: Latest Nightly: http://downloads.hostingsharedbox.com/.jumoog/r7/pa_r7plus-5.1-20151103.zip
2. GApps: OpenGApps (select: ARM64 >> 5.1 >> Choice the package you want): http://opengapps.org/
3. Recovery: CyanogenMod Recovery or TWRP: https://download.cyanogenmod.org/?device=r7plus | https://dl.twrp.me/r7plusf/twrp-2.8.7.2-r7plusf.img
Changelog:
23.10.2015:
1. First release.
24.10.2015:
1. Everything runs extremly smooth.
25.10.2015:
1. Add fingerprint translation.
03.11.2015:
1. Fixed unknow apps toggle.
2. Fixed Security Issues.
Thanks.
Best Regards,
Mulham Darwish

hello mate, are you a developer of this rom? I was testing the latest build and there were no PA features as stated. Not even chance to change SW buttons to order you want.

Has anybody tried flashing this and have any feedback on it? Any bugs or issues? With being a stock Android rom I would figure this would get more comments and feedback? Or is this a troll post? No disrespect to op.

marcviado said:
Has anybody tried flashing this and have any feedback on it? Any bugs or issues? With being a stock Android rom I would figure this would get more comments and feedback? Or is this a troll post? No disrespect to op.
Click to expand...
Click to collapse
I don't have test it but I confirm you that this ROM isn't a fake. The official thread is on OPPO Community and his author is jumoog
P.S. In the official thread you can find the update link, search in the various reply (if I remember correctly, the latest version is 11/13)

Nexus5-32GB said:
hello mate, are you a developer of this rom? I was testing the latest build and there were no PA features as stated. Not even chance to change SW buttons to order you want.
Click to expand...
Click to collapse
No I am not, I just saw this post in the OPPO Official Website.
Thanks.

[07/19/2020][9.X] Android Open Source Project Pie Huawei P8 Lite 2017

About the Android Open Source Project
Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
BUGS:
TELL ME.
sdcard that I will fix in next build.
GAPPS:
Click here to download this gapps.
Downloads:
09/05/2020
aosp-9-20200508-prague-haky86.zip
Fix gapps issue.
Fix hwc thanks to Flex1911.
I forget to include NFC fix, just flash Treble's module.
19/19/2020
aosp-9-20200716-hi6250-haky86.zip
Restart works.
Fix Google Play errors:
Go to Settings.
Open Apps.
Search for Google Play Store and Google Play Services.
Give the permissions especially to storages to get Play Store worked correctley.
XDA:DevDB Information
Android Open Source Project Pie for HI6250 Emui 8.x based, ROM for the Honor 8 Lite
Contributors
haky 86, flex1911
Source Code: http://github.com/hak86
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-11-18
Beta Release Date: 2018-11-18
Created 2018-11-18
Last Updated 2019-11-14

** Note **
reserved:
topic will be reopened once download is uploaded
Edit: rom uploaded

Any experience with this?

dtrail1 said:
Any experience with this?
Click to expand...
Click to collapse
same as other roms, I simply remove kirin970 stuff.

I'm assuming Gapps are not included?

verntechguy said:
I'm assuming Gapps are not included?
Click to expand...
Click to collapse
Nope isn't included. I will use this thread as unique place for all my Pie ROMs.

haky 86 said:
Nope isn't included. I will use this thread as unique place for all my Pie ROMs.
Click to expand...
Click to collapse
Thanks for the info. So opengapps should work right? How about Magisk? Standard version should work?

verntechguy said:
Thanks for the info. So opengapps should work right? How about Magisk? Standard version should work?
Click to expand...
Click to collapse
for gapps I recommend pico, since it is "demo" build for nfc you have to flash magisk module, for magisk use 17.1 and up also don't forget to install the manager application.

haky 86 said:
for gapps I recommend pico, since it is "demo" build for nfc you have to flash magisk module, for magisk use 17.1 and up also don't forget to install the manager application.
Click to expand...
Click to collapse
My variant doesn't have nfc so I don't have to worry about that. Will try this out once I'm free. Thanks for your work!

** Breaking News **
AOSP Extended is HERE
08/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Bugs: media works just via VLC application or similar, I will fix in next build.
Don't forget to do the following things:
1-)Reboot in TWRP and mount system, vendor and splash2 partitions.
2-)Run the following command from terminal: /sbin/sh /system/bin/releasetools.kirin970.sh
3-)Flash eRecovery and do factory reset to boot the rom properly. P.S: if boot with a fully worked twrp you don't need to flash stock eRecovery.
No screenshots? I forget to save them but see the one in the attached files
Telegram: https://t.me/HakyGSI

** Note **
AOSP has been updated
aosp-pie-9.0.0_r16-hi6250-090112018.tar.gz
Android 9.0.0 R16.
Hotspot fixed.
NFC fixed properly.
Don't forget run releasetools.kirin970.sh script via twrp to boot the whole rom.

cookremier said:
Dates doesn´t match to the files in the main post.
Look at this:
AOSP Extended:
18/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Do you live in the future with a Flux Compensator ???
Click to expand...
Click to collapse
yes, I'm coming from the future .
it just a typo's error

Any other recommendation before flashing your Image? Tried it by coming from EMUI 8 but got sparse error after flashing system.img in fastboot.

pete80pro said:
By following your Tutorial I'm gettin error message on flashing System.img with fastboot.
I have to be on EMUI 8 before, any other needed things?
Click to expand...
Click to collapse
Flash phh's aosp 9 without wiping emui 8 system partition then try mine. in case not working wait next build then
I manage to boot LineageOS 16.0, I will fix error 7 here too and upload first beta in separate topic.

Good for daily use ? P10 Lite

cxyqqz said:
Good for daily use ? P10 Lite
Click to expand...
Click to collapse
Yes but I have to fix fastboot error first.
Anyways LineageOS 16.0 cancelled, sometime boot and some time doesn't boot. I'm start getting bored of from Emui 8.x and back to emui 5.x developments that are better in certain sense.

P20 Lite ane-lx support?

A_S_A113 said:
P20 Lite ane-lx support?
Click to expand...
Click to collapse
yes it is, the next image of AOSP 9 with fastboot fix will come out in next hours.

haky 86 said:
AOSP Extended is HERE
08/11/2018:
AospExtended-v6.0-hi6250-20181108-1232-UNOFFICIAL.zip
Bugs: media works just via VLC application or similar, I will fix in next build.
Don't forget to do the following things:
1-)Reboot in TWRP and mount system, vendor and splash2 partitions.
2-)Run the following command from terminal: /sbin/sh /system/bin/releasetools.kirin970.sh
3-)Flash eRecovery and do factory reset to boot the rom properly. P.S: if boot with a fully worked twrp you don't need to flash stock eRecovery.
No screenshots? I forget to save them but see the one in the attached files
Telegram: https://t.me/HakyGSI
Click to expand...
Click to collapse
What do you mean by flashing erecovery, you mean stock recovery right? (recovery ramdisk)

steven360 said:
What do you mean by flashing erecovery, you mean stock recovery right? (recovery ramdisk)
Click to expand...
Click to collapse
yes stock recovery, it is needed just to wipe data & cache. the releasetools.kirin970.sh can be flashed by twrp post rom installation by /sbin/sh in shell.

[PRA-LX1][9.x][15/05/20190] Android Open Source Project Pie Honor 8 Lite

About the Android Open Source Project
Android is an open source software stack for mobile devices and a corresponding open source project led by Google. This site and the Android Open Source Project (AOSP) repository offer the information and source code needed to create custom variants of the Android stack, port devices and accessories to the Android platform, and ensure devices meet the compatibility requirements that keep the Android ecosystem a healthy and stable environment for millions of users.
BUGS:
TELL ME.
GAPPS:
Click here to download this gapps.
Downloads:
25-03-2019
aosp-9-20190325-prague-haky86.zip
Android 9.0.0 R34.
Security Patches: 5 March 2019.
Video Recording: fix some lags.
Fix “preparing for setup” only with SimpleGAPPS .
Include HI6250 Hardware Overlays from GSI , thanks to Dil3mm4.
Include Phh Treble Settings from GSI to DSSI ROMs . thanks to Phhusson.
Include vndk-sp-28 blobs..
15-05-2019
aosp-9-20190515-prague-root.zip.
Android 9.0.0 R39.
May 2019 Patches.
Fix most minor bugs.
Fix Notification access.
Possible fix for BLE (with selinux rule instead!)
Fix Google Play errors:
Go to Settings.
Open Apps.
Search for Google Play Store and Google Play Services.
Give the permissions especially to storages to get Play Store worked correctley.
Installation Guides:
Download the latest update.
Make sure to have this TWRP
Reboot to TWRP, flash this rom without wiping any partition.
Go to Install > Install Image and select RECOVERY_RAMDISK.IMG as Recovery Ramdisk.
Reboot to Stock Recovery from TWRP and wipe data & cache partition, reboot enjoy the rom
Avoid wasting time with wiping data with TWRP or will never ever boot, follow my steps and will boot for sure.
XDA:DevDB Information
Android Open Source Project Pie for HI6250 Emui 8.x based, ROM for the Honor 8 Lite
Contributors
haky 86, flex1911
Source Code: http://github.com/hak86
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-11-18
Beta Release Date: 2018-11-18
Created 2018-11-18
Last Updated 2018-11-22

let's reserve one post, screenshots are under "Screenshots" tab in the OP. have a nice day!

** New ROM **
New build is ready.
Follow steps to boot it as I did.
Check screenshots in attached files.

problem in partition length
haky 86 said:
New build is ready.
Follow steps to boot it as I did.
Check screenshots in attached files.
Click to expand...
Click to collapse
hi
i have a problem when i try to flash recovery the twrp it says
( target reported max download size of 471859200 bytes
sending 'recovery' (24954 KB)...
OKAY [ 0.630s]
writing 'recovery'...
FAILED (remote: partition length get error))
i have emui 8 with official rom from p8lite 2017
and it has a E recovery mode when the bootloader was lock and i didnt wipe any partition
can u help me plzzzzzzzzzzzzzzzzz?

** ROM **
New flashable version is up, check the op for the last changelog.
Honor 8 Lite "Prague" ROMs can be found here too.
https://www.haky86.com/pra/emui-8/
Recommended TWRP:
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
flash the version .2
I'll push new topics for new roms in this section.

accidentlly wipe partitions and now my phone not start
haky 86 said:
New flashable version is up, check the op for the last changelog.
Honor 8 Lite "Prague" ROMs can be found here too.
https://www.haky86.com/pra/emui-8/
Recommended TWRP:
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
flash the version .2
I'll push new topics for new roms in this section.
Click to expand...
Click to collapse
hello again.
i installed the lineage os very well ty for that
but i have some problem with GAPPs forced to stop
and i try to factory reset but accidentlly wipe every things can u help me fix that.
now my phone is in loop boot
realy need help plz!!!!

vandal051 said:
hello again.
i installed the lineage os very well ty for that
but i have some problem with GAPPs forced to stop
and i try to factory reset but accidentlly wipe every things can u help me fix that.
now my phone is in loop boot
realy need help plz!!!!
Click to expand...
Click to collapse
Join telegram group, I don't like reply.
https://t.me/EmuiDev

telegram ID not find
haky 86 said:
Join telegram group, I don't like reply.
i try to jion the gp but it say user name not found
can u inv me in group?
my username is @Arsham_chap
and my phone number is 00989376323666
im from iran
thank you very much for ur helping :good::good:
Click to expand...
Click to collapse

Is this Rom is good or not please tell me

brother please help me !!!
i need bootloader key for Honor 8 lite device . i want to run custom rom please .

looks promising but... any luck for PRA-LA1 ?

nkale862 said:
brother please help me !!!
i need bootloader key for Honor 8 lite device . i want to run custom rom please .
Click to expand...
Click to collapse
use potatoav (search google or github). it works i have honor 8 lite

[ROM][OFFICIAL][kirin][11] LineageOS 18.1

Thanks for the ROM!
Just installed the 20201003 build and it flawlessly so far.
Just a quick question, I can't seem to delete the search widget in the default launcher (quickstep), are there any way to delete it?
Also there are no "Advanced restart" option anymore, is there a way to have a reboot to recovery/bootloader entry in the new Android 11 power menu?

diyod said:
Thanks for the ROM!
Just installed the 20201003 build and it flawlessly so far.
Just a quick question, I can't seem to delete the search widget in the default launcher (quickstep), are there any way to delete it?
Also there are no "Advanced restart" option anymore, is there a way to have a reboot to recovery/bootloader entry in the new Android 11 power menu?
Click to expand...
Click to collapse
>Just a quick question, I can't seem to delete the search widget in the default launcher (quickstep), are there any way to delete it?
Launcher customizations aren't brought up yet thus search bar is stuck there for time being.
>Also there are no "Advanced restart" option anymore, is there a way to have a reboot to recovery/bootloader entry in the new Android 11 power menu?
Power menu additions aren't brought up either.

LuK1337 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's not working :
WFD
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds :
https://www.androidfilehost.com/?w=files&flid=318024
http://downloads.codefi.re/jdcteam/luk/lineage-18_0/kirin
https://sourceforge.net/projects/luk-lineageos/files/kirin/lineage-18.0
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
XDA:DevDB Information
[ROM][UNOFFICIAL][kirin][11] LineageOS 18.0, ROM for the Sony Xperia 10
Contributors
LuK1337
Source Code: https://github.com/LineageOS
ROM OS Version: Windows 8 Mobile
Based On: LineageOS
Version Information
Status: Testing
Created 2020-09-28
Last Updated 2020-09-28
Click to expand...
Click to collapse
Hello. Does the rom have signiture spoofing?

Gapps Not working
LineageOS version: 18.0
LineageOS Download url: First one I can`t submit the post with the link, this is the version: lineage-18.0-20201016_012612-UNOFFICIAL-kirin.zip
Gapps version: Here is where the issue occurs. None of the Gapps found here, and in first pages in Google by searching "Lineage OS 18 gapps" or either "Android 11 gapps" ever worked on Lineage OS 18.
I flashed with TWRP (I tried also with the Lineage OS recovery but I know that Gapps are not signed and return error from there) Immediately after a clean installation of Lineage OS 18 and wipe, All Open Gapps versions found, BitApps, NikApps and others came with error code 20, error code 70 (I tried with resizing the partition, switching slots, did not work) or fatal error. I managed to flash some of them successfully but they never showed up after turning on the phone.
Everything else except Gapps working as expected until now.
The same kernel is used as for Lineage OS 17.1 that was previously used with a working OpenGapps flash.
The phone version is Xperia 10 I4113, no modifications were made, just Unlocked bootloader, TWRP recovery, Flashed Lineage OS 18 and Flashed all versions of Gapps with no success.
In case you`ve tested and got Gapps successfully after installing the rom share this version with us so we can flash it and use the ROM for daily routines by continue testing.
Thanks in advance.
Regards.

dian1994 said:
LineageOS version: 18.0
LineageOS Download url: First one I can`t submit the post with the link, this is the version: lineage-18.0-20201016_012612-UNOFFICIAL-kirin.zip
Gapps version: Here is where the issue occurs. None of the Gapps found here, and in first pages in Google by searching "Lineage OS 18 gapps" or either "Android 11 gapps" ever worked on Lineage OS 18.
I flashed with TWRP (I tried also with the Lineage OS recovery but I know that Gapps are not signed and return error from there) Immediately after a clean installation of Lineage OS 18 and wipe, All Open Gapps versions found, BitApps, NikApps and others came with error code 20, error code 70 (I tried with resizing the partition, switching slots, did not work) or fatal error. I managed to flash some of them successfully but they never showed up after turning on the phone.
Everything else except Gapps working as expected until now.
The same kernel is used as for Lineage OS 17.1 that was previously used with a working OpenGapps flash.
The phone version is Xperia 10 I4113, no modifications were made, just Unlocked bootloader, TWRP recovery, Flashed Lineage OS 18 and Flashed all versions of Gapps with no success.
In case you`ve tested and got Gapps successfully after installing the rom share this version with us so we can flash it and use the ROM for daily routines by continue testing.
Thanks in advance.
Regards.
Click to expand...
Click to collapse
Did you actually reboot recovery between installing rom and gapps?

LuK1337 said:
Did you actually reboot recovery between installing rom and gapps?
Click to expand...
Click to collapse
Yes, I did that multiple times during all night long with many different Gapps versions and reboots of the recovery between ROM flashing and Gapps.
If it is possible to provide a Download URL with Gapps version that has been tested on your end by this way after ROM flashes and it works that will be highly appreciated.
I`ve switched back in 17.1 twice by installing Gapps without issues.
I am currently using the ROM without Gapps so I can wipe and trigger a new flash of Gapps from the recovery, but none of the versions I already tried ever showing up or complete installation.
Thank you for your time and support.

dian1994 said:
Yes, I did that multiple times during all night long with many different Gapps versions and reboots of the recovery between ROM flashing and Gapps.
If it is possible to provide a Download URL with Gapps version that has been tested on your end by this way after ROM flashes and it works that will be highly appreciated.
I`ve switched back in 17.1 twice by installing Gapps without issues.
I am currently using the ROM without Gapps so I can wipe and trigger a new flash of Gapps from the recovery, but none of the versions I already tried ever showing up or complete installation.
Thank you for your time and support.
Click to expand...
Click to collapse
You tried fastboot booting twrp and installing gapps there?

LuK1337 said:
You tried fastboot booting twrp and installing gapps there?
Click to expand...
Click to collapse
Yes, exactly I am using adb to flash the ROM first, then flash TWRP recovery via fastboot and then flashing gapps via adb from TWRP recovery again by repeating this order in every gapps version which does not take effect or return error 20 or error 70 (open gapps) and fatal error for NikApps.
If it is important I am using MacOS, but we tried from Windows ADB once without much of success.

dian1994 said:
Yes, exactly I am using adb to flash the ROM first, then flash TWRP recovery via fastboot and then flashing gapps via adb from TWRP recovery again by repeating this order in every gapps version which does not take effect or return error 20 or error 70 (open gapps) and fatal error for NikApps.
If it is important I am using MacOS, but we tried from Windows ADB once without much of success.
Click to expand...
Click to collapse
What fatal error are you getting on nikgapps?

LuK1337 said:
What fatal error are you getting on nikgapps?
Click to expand...
Click to collapse
Currently I can not remember if BitApps version or NikApps returned the error, but the error said that this version is not compatible and the flash just stopped with general error in TWRP recovery log. One of them returned the error, the other one has completed but nothing has showed up after booting to the OS.
I am in the office right now and did not get the cable but if you have suggestions on specific versions of gapps that you think are working, I will try to flash each one by following your instructions tomorrow night after work and provide you with feedback of screenshot of TWRP recovery log for every single gapps package.
If there is a version which you know that can go thru the security signing check from Lineage recovery I can try to flash it from the sdcard right away.

dian1994 said:
Currently I can not remember if BitApps version or NikApps returned the error, but the error said that this version is not compatible and the flash just stopped with general error in TWRP recovery log. One of them returned the error, the other one has completed but nothing has showed up after booting to the OS.
I am in the office right now and did not get the cable but if you have suggestions on specific versions of gapps that you think are working, I will try to flash each one by following your instructions tomorrow night after work and provide you with feedback of screenshot of TWRP recovery log for every single gapps package.
If there is a version which you know that can go thru the security signing check from Lineage recovery I can try to flash it from the sdcard right away.
Click to expand...
Click to collapse
NikGapps-omni-arm64-11-20201010-signed.zip seems to install properly here.
>If there is a version which you know that can go thru the security signing check from Lineage recovery I can try to flash it from the sdcard right away
Not yet, I just ported the patch that allows for that btw.

LuK1337 said:
NikGapps-omni-arm64-11-20201010-signed.zip seems to install properly here.
>If there is a version which you know that can go thru the security signing check from Lineage recovery I can try to flash it from the sdcard right away
Not yet, I just ported the patch that allows for that btw.
Click to expand...
Click to collapse
Thanks I will give a try and let you know about the result.

LuK1337 said:
NikGapps-omni-arm64-11-20201010-signed.zip seems to install properly here.
>If there is a version which you know that can go thru the security signing check from Lineage recovery I can try to flash it from the sdcard right away
Not yet, I just ported the patch that allows for that btw.
Click to expand...
Click to collapse
I just want to let you know that this version worked as expected. I have no explanation but probably I did something wrong with the slots. Thanks. I will keep you posted in case of a bug found. However Gapps required TWRP, Lineage recovery does not install gapps due Signing request error.

Bugs Report
I would like to come up with a short report of what did not work with the rom for a few weeks of using.
Actually almost everything works except two main functions.
1. Wi - Fi HotSpot do not work. It shows up but when you connect from another device there is no internet connection. 4G has been established on LineageOS but do not reach the external device via Wi - Fi hot spot.
2. Google accuracy location service does not work, GPS works only when you stay outside. I do not know if it is related to GApps or Rom backend. If you run an app that requires location services will run only outside which is a quite too bad.
That's it for now. Hope it helps.

dian1994 said:
I would like to come up with a short report of what did not work with the rom for a few weeks of using.
Actually almost everything works except two main functions.
1. Wi - Fi HotSpot do not work. It shows up but when you connect from another device there is no internet connection. 4G has been established on LineageOS but do not reach the external device via Wi - Fi hot spot.
2. Google accuracy location service does not work, GPS works only when you stay outside. I do not know if it is related to GApps or Rom backend. If you run an app that requires location services will run only outside which is a quite too bad.
That's it for now. Hope it helps.
Click to expand...
Click to collapse
1. Consider not being over 5 builds behind.

LuK1337 said:
1. Consider not being over 5 builds behind.
Click to expand...
Click to collapse
You mean that Wi-Fi hot spot issue has been fixed already in a recent build?

dian1994 said:
You mean that Wi-Fi hot spot issue has been fixed already in a recent build?
Click to expand...
Click to collapse
Go ahead and try.

LuK1337 said:
Go ahead and try.
Click to expand...
Click to collapse
Gotcha. Thanks.

has anyone had any luck getting magisk 21.1 to work with this rom and twrp yet?
im going round in circles trying to root after updating. i can install magisk from twrp, but i end up in a bootloop, then installing the bootloop fix from twrp wipes magisk and breaks root.
i know 21.1 is a beta and likely doesnt support sony phones yet, but someone might have a fix.
EDIT: I have root working now. Anyone having trouble, DONT install twrp to ramdisk. just leave the lineageOS recovery in place and use fastboot on a pc to boot twrp when you need it.
I did the following:
1. fresh stock firmware via newflash
2.flash sony software binaries for a11
3. fastboot boot twrp.img
4.swap to partition b
5. power off
6. fastboot boot twrp.img (check you are booted to partition b)
7. flash lineageos 18
8.reboot select partition a and POWER OFF
9. fastboot boot twrp.img
10. check partition is a
11. flash copy partition.zip
12. flash magisk 21.1.zip
13. flash nikGapps basic for a11
14. reboot system
15. install magiskmanager 8.0.3.apk
16. reboot
17. update your apps on playstore.
18. PROFIT.
lineage os18 rooted on my xperia 10.

born2bkilled said:
I did the following:
1. fresh stock firmware via newflash
2.flash sony software binaries for a11
3. fastboot boot twrp.img
4.swap to partition b
5. power off
6. fastboot boot twrp.img (check you are booted to partition b)
7. flash lineageos 18
8.reboot select partition a and POWER OFF
9. fastboot boot twrp.img
10. check partition is a
11. flash copy partition.zip
12. flash magisk 21.1.zip
13. flash nikGapps basic for a11
14. reboot system
15. install magiskmanager 8.0.3.apk
16. reboot
17. update your apps on playstore.
18. PROFIT.
lineage os18 rooted on my xperia 10.
Click to expand...
Click to collapse
Which package is it you use?
If I flash the Gapps, Lineage can't boot into system and asks for a factory reset.
I'm following the steps exactly as they're described.
Am I missing something?

Just installed it. Was some effort, coming from SailfishX.
Had to install Sony binaries first, then get the latest TWRP (old one gave me errors, the provided one in this post as well). After that installed NikGapps (Gapps or open Gapps do not work I think). Was up till 3am
Got some problems though:
Cannot enable wifi.
Does not detect cellular network at all?
GUI stopped working error at every boot (works after clicking at away).
Settings stopped responding when I click network.
Fingerprint does not seem to be working? Do I need a specifiek Gapps version for that?
Can you tell me what the camera mod does? I do not see any difference?
Thanks for the effort this far!
Edit: I seem to be missing the firmware alltogether. Any ideas how to fix this?

[ROM] [11.0] [OFFICIAL] AICP 16.1 [instantnoodle]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
Pixel Experience Team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
On Clean Flash: mandatory for first install !!!At the beginning, if you are on Stock OOS 11 ROM with locked bootloader, please follow the instructions for unlocking bootloader here: https://wiki.lineageos.org/devices/instantnoodle/install
1. Download the ROM and GApps to your PC with proper adb & fastboot setup.
Also download to your PC instantnoodle-recovery.img from HERE
2. Boot to bootloader and run in cmd (windows) / terminal (linux)
fastboot flash recovery instantnoodle-recovery.img
4. Boot to recovery. Tap on Factory Reset (this will erase everything on your device) then return to main menu
3. Connect your device to your PC and tap on Apply Update -> Apply from ADB and
4. Flash the ROM zip file using
adb sideload aicp_instantnoodle_r-16.1-WEEKLY-{date}.zip
5. Once its finished, reboot to recovery to flash the GApps (optional, needed for e.g. Google Playstore to work). This is mandatory becoz will switch automatically current slot and will flash GAPPS.
Once it boots to recovery, tap on Apply Update -> Apply from ADB then run
adb sideload GAPPS.zip
6. Reboot and set up your device.
7. Reboot back into recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The main workflow for flashing via recovery:
reboot to recovery -> adb sideload ROM.zip -> reboot recovery -> adb sideload GAPPS.zip -> reboot to system
Click to expand...
Click to collapse
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 21.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
Go to Aicp Extras -> Update Centre then install new Weekly Build.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source: We are building Neutrino Kernel adopted to our sources with permission by Kernel Dev
GitHub - AICP/kernel_oneplus_sm8250
Contribute to AICP/kernel_oneplus_sm8250 development by creating an account on GitHub.
github.com
Device tree source:
AICP/device_oneplus_instantnoodle
Device tree for OnePlus 8. Contribute to AICP/device_oneplus_instantnoodle development by creating an account on GitHub.
github.com
Common device tree source:
GitHub - AICP/device_oneplus_sm8250-common
Contribute to AICP/device_oneplus_sm8250-common development by creating an account on GitHub.
github.com
Vendor source:
AICP/proprietary_vendor_oneplus
Contribute to AICP/proprietary_vendor_oneplus development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Join us on our Discord Channel
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long xD)
Information:[/U[
ROM OS Version: 11.1
Kernel: Linux 4.19.176
ROM {Firmware|Vendor} OnePlus8Oxygen_15.E.35_OTA_0350.
Status: {STABLE}
Release Date: 04-03-2021
You want to see a "normal" night at the "DEV office", click here!!

AICP recovery: link HERE
---------------------------------------------------------------------------------------------------------------
New build guys
10.04.2021 UPDATE
Download aicp_instantnoodle_r-16.1-WEEKLY-20210410.zip from HERE
Changelog: link HERE
No GAPPS in the ROM.zip.
** İf you are comming from older version - no need to flash clean.
-- if you are rooted: Just go to Updater in AicpExtras choose the downloaded zip from your storage and install the update.
-- if you aren't rooted:
**** Download the zip. Connect your phone to your PC. and run adb root in terminal (or cmd windows for Win). Then run adb shell setenforce 0 and install downloaded zip as local upgrade from Updater in AicpExtras. You'll be on enforcing selinux mode after reboot
-- You can flash in recovery via adb sideload. İf you choose this way, don't forget to reboot to recovery and flash your GAPPS.zip via adb sideload again.
-- if you want to clean flash:
**** reboot to recovery. Format data then follow the procedure given below:
flash rom.zip via adb sideload -> reboot recovery -> flash gapps.zip via adb sideload -> reboot to system
What's new:
1. April '21 ASB merged
2. Added ALipay fingerprint payment support
3. Screenbrightness fixes for all 3 devices
4. Many fixes including SafetyNet (fixed again)
Enjoy !!!
---------------------------------------------------------------------------------------------------------------
04.04.2021 Build !!!
Download aicp_instantnoodle_r-16.1-WEEKLY-20210404.zip from HERE.
Changelog: link HERE.
-- There is no GAPPS in the ROM.zip.Download GAPPS from:
MindTheGapps or OpenGapps Android 11 Nano
How to install:
1. Go to recovery. Format data if you want to flash clean.
2. Apply Update from ADB
3. then adb sideload aicp_instantnoodle_r-16.1-WEEKLY-20210404.zip
4. Reboot to recovery
5. Flash Gapps via adb sideload GAPPS.zip
** İmportant: Android Auto fails to connect with OpenGapps. All good with MindTheGapps
** There is no DevicePersonalization app in these - if you want, I can provide a modified GAPPS package
6. If you want to switch in between GAPPS packages, just flash other GAPPS package on the new flash. Clean flash isn't trivial, but recommended....
*** Next flashes can go through Updater or adb sideload.
** If you flash via Updater, backup tool will handle your gapps - no need to reflash them again.
** GAPPS need to be flashed on every update if you flash via adb sideload. Flash them as it is described above.
What's new?
** Stock vibration patterns are back
** App Lock from AOSP-A
** Neutrino Kernel updated to 4.19.183
** and many more....
All feedbacks are appreciated, as always.
Cheerz
---------------------------------------------------------------------------------------------------------------
For those who want to ROOT their devices:
Download Magisk 21.4 zip: link HERE
** boot to recovery
** flash via adb sideload magisk.zip:
** reboot.
** Note that you HAVE to do this on every update.
** SafetyNet is fixed on March 5 build !!!
Enjoy !!

Which Camera we can use:
1. Using this Camera: GCam_7.3.018_Urnyx05-v2.1_Wichaya_V3.1.1_snapcam.apk
2. Also I have thix xml file under GCam/Configs7 : nrG Wichaya 7.3.018_v3.1.1.xml

finally! thanks

Very nice. Quick question. Are Verizon a11 blobs merged ? No custom rom currently gets data for us Verizon op8 users?

mattie_49 said:
Very nice. Quick question. Are Verizon a11 blobs merged ? No custom rom currently gets data for us Verizon op8 users?
Click to expand...
Click to collapse
No unfortunately. Doubt it'll work on Verizon.

semdoc said:
No unfortunately. Doubt it'll work on Verizon.
Click to expand...
Click to collapse
Thanks for quick response. I'm gonna try later anyway. He he. Why is it so hard for us to get data/signal on custom roms. Qti telephony ? Or the 5g modem that gets mm wave?

mattie_49 said:
Thanks for quick response. I'm gonna try later anyway. He he. Why is it so hard for us to get data/signal on custom roms. Qti telephony ? Or the 5g modem that gets mm wave?
Click to expand...
Click to collapse
most likely qti telephony....

Rebuilt and re-uploaded initial build. The issue was broken adb sideload . Now fixed and all should be fine.
Download aicp_instantnoodle_r-16.1-WEEKLY-20210305.zip from HERE
Cheers.

Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!

passion8059 said:
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
Click to expand...
Click to collapse
Will check it out Thanx for feedback

passion8059 said:
Thanks for the rom, working great, but has same issue as all lineage based roms...video calls have audio distorted (too loud) and bad feedback from mic. Any fixes in the pipeline? Thanks again!
Click to expand...
Click to collapse
Can you please test this build:
Download aicp_instantnoodle_r-16.1-WEEKLY-20210307.zip from HERE
** Attempt to fix audio ssues.
If you are rooted: Just download the build to your device. Choose from AicpExtras -> Updater and flash after choosing from right upper corner.
If you aren't rooted:
1. go to recovery and flash via adb sideload and reboot.
All feeedbacks are appreciated.

semdoc said:
Can you please test this build:
Download aicp_instantnoodle_r-16.1-WEEKLY-20210307.zip from HERE
** Attempt to fix audio ssues.
If you are rooted: Just download the build to your device. Choose from AicpExtras -> Updater and flash after choosing from right upper corner.
If you aren't rooted:
1. go to recovery and flash via adb sideload and reboot.
All feeedbacks are appreciated.
Click to expand...
Click to collapse
Will update and report back accordingly. Thanks

passion8059 said:
Will update and report back accordingly. Thanks
Click to expand...
Click to collapse
Have tried video call today, mic seems to be fixed but on max volume (I have 2 young boys who won't be quiet ;-)) it still distorts so have to knock it down a bit and struggle to hear what is being said.

passion8059 said:
Have tried video call today, mic seems to be fixed but on max volume (I have 2 young boys who won't be quiet ;-)) it still distorts so have to knock it down a bit and struggle to hear what is being said.
Click to expand...
Click to collapse
LUK merged fixes for all 3 op8 devices today...
So you'll get test builds later today...

hello what interests me can we record the conversation natively?

doc411 said:
hello what interests me can we record the conversation natively?
Click to expand...
Click to collapse
Yes, we have that option in our Dialer.

semdoc said:
Yes, we have that option in our Dialer.
Click to expand...
Click to collapse
thank you very much for your quick rest

New build guys.
You can download aicp_instantnoodle_r-16.1-WEEKLY-20210309.zip from HERE.
-- Please test audio, calls - including whatsapp & telegram calls in all aspects..
-- OOS Style Clear all notificaitons button added
-- Kernel Update by Neutrino kernel dev.
Changelog: link HERE
Cheerz guys

Thanks for the update. Ringing at max is distorted still and there is a severe memory lag where you watch YouTube videos it'll play but then buffer then play again. I'm on a good broadband connection (500mb) and WiFi 6 coverage. Have cleared caches and used ex kernel manager to clear memory buffers but still the same.

Database Info

welcome