Hello,
I recently unlocked, flashed TWRP and flashed Pixel Experience onto my Mi Mix 2s. After some time a notification of an available update appeared. I tried to install it but it didn't work. After some troubleshooting it appeared that I couldn't get my device booted into TWRP recovery mode.
I tried reflashing it via fastboot but that didn't work. It did not give any errors upon executing the command lines in the fastboot command prompt but just nothing happened. It just sat still like it was waiting, and waiting, and waiting.
So i thought, let's just reset the phone via the normal settings menu in Android. In hindsight that was quite a dumb move I guess, because after all the phone used to be working. But still I followed through and now it wound up in a bootloop. I can still get it into the bootloader mode, and in fastboot it shows my device when I execute <fasboot devices> but flashing or erasing the recovery doesn't work. It looks as if it sees the phone, can get info from it but is not able or allowed to flash anything to it. But it doesn't give any errors, it just seems to keep waiting on something, I don't know.
I hope any of you guys can help me because searching this forum or googling hasn't helped me getting any further. All topics I found at least had some errors in fastboot/bootloader mode which gave them a direction to go into...
So please help me!
Whoops, I solved it myself. On another laptop it magically worked the first time. Probably an issue with either the USB port or the drivers.
Thread closed at OP request
Related
So last night I tried to install CM11 and unfortunately forgot to make sure it was a clean install. Got stuck on boot animation and after remembering what I did wrong, tried to get back into recovery, however this is my first time trying to install CM on this device so was confused when the power button wasn't the "select" button to get me into recovery...so I ended up messing around for a bit and now I'm screwed.
My phone doesn't show up as a storage device on my computer and only recognises it as an "Android" device or "Fastboot Falcon S". I have tried reinstalling the Motorola drivers and I'm just at a loss. :crying:
I can access recovery on my phone but when I attempt to install a zip from sdcard it says "E: Can't mount /sdcard". Which means I can't install any Roms. I did some research and apparently I can push a stock rom to my phone, but this leads me to my next problem.
I can't seem to get adb to recognise my phone. I feel like I have tried everything but I have reached the extent of my knowledge on this matter and It's starting to hurt my brain. I saw mention of using "Eclipse" but when I try to run it I get an error message about Java.
Edit: When I say adb doesn't recognise my phone, it doesn't show up when I type the command "adb devices" and whenever I attempt an adb command such as "adb push" or "adb shell" I get an error message. I can however use all fastboot commands, which were a big help.
I honestly am completely and totally baffled on how to recover from this total f*ck up, so if any of you geniuses could help me save my device I would be forever grateful. I'm not sure what information I should supply you with as this is my first post. So please tell me what you need and I'll try me best to get you the info.
Thank you!
If you can boot into fastboot mode, just flash stock firmware of your region. There are many guides in the general and q/a sections. Just read them properly and remember to use mfastboot.
Sent from my Moto G using Tapatalk
You don't need adb, but mfastboot, which are two different things.
Let your brain rest few hours and then read the guides how to flash stock firmware.
You are fantastic. Thank you so much!
I can finally use it again.....and attempt to flash CM11 again, hopefully this time without screwing it up.
I owe you!
Alright have read the first 30 pages of comments on http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912 and I starting to feel like I'm dumber then a brick.
Okay here is my problem: Just bought a used OPO with the classic boot logo loop error. I have tried to just simply Factory reset it (both Full and wipe cache) and it gives me E: failed to mount /cache (invalid argument) error. Then I googled it and most of the results said that I need to simply reinstall the software with adb. Okay got adb up and running and installed my phones drivers and booted into fastboot.
Then when I try to install it gave me "device not unlocked" error... Fine googled it tried "fastboot oem unlock" and it was still not unlocked.
Googled that and read the posts about tampered bits and after running the "fastboot oem device-info" It gives me "Device tampering: true" "Device unlocked: false" so damn.
Then I read the posts and tried to sideload OnePlusOne-BootUnlocker.zip (used the "apply update" in cyanogen recovery to get the ADB sideload) but it comes up with E: failed to mount /cache (invalid argument) and fails all the other things.
Have tried "fastboot boot recovery recovery.img" but that have the have a unlocked bootloader.
I'm abit lost ATM because I discovered that wile I can get fastboot and Sideload (from update) to show my device the normal adb can't see it when just being in the menu.
So if one of you could point me in the right way or if you got time guide me then I would be greatfull.
Regards Magnus/Mjallo
PS. Please don't burn me for asking
Can post pictures of the screen if it is needed
@Mjallo google "Bacon Toolkit."
Does literally all the things you are trying to do in a matter of a few clicks. Walks you through everything step by step.
h11wiscan said:
@Mjallo google "Bacon Toolkit."
Does literally all the things you are trying to do in a matter of a few clicks. Walks you through everything step by step.
Click to expand...
Click to collapse
Okay have played around with the program abit more and all it does is that same as me doing it in CMD.
I still have the problem with Device tampering and device unlock state. Where is the tools for fixing that?
Have tried to fix the cache but it still make the invalid argument.
might could fastboot flash official images to get the phone back to normal. you dont have to have bootloader unlocked to flash official boot images. you can go here https://cyngn.com/support and download the cm-13.1-ZNH2KAS254-bacon-signed-fastboot-d194f46bee.zip (scroll down to opo section) and/or go to http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 and get the download and follow directions in that post to flash phone
Mjallo said:
Okay have played around with the program abit more and all it does is that same as me doing it in CMD.
I still have the problem with Device tampering and device unlock state. Where is the tools for fixing that?
Have tried to fix the cache but it still make the invalid argument.
Click to expand...
Click to collapse
Yeah idk then. Need more screenshots or info to help. Could be a million things.
-Are you using OEM USB cable?
-Did you install ALL drivers properly?
-Have you rebooted since installing ALL drivers?
-Have you tried using bacon toolkit on another computer? Sometimes simply switching computers can help.
-Did you try resetting phone to factory state using ABD/Bacon Toolkit?
-In Bacon Toolkit did you select the proper firmware and software version before attempting to use the program?
A few questions to ask yourself before we go further.
kenboyles72 said:
might could fastboot flash official images to get the phone back to normal. you dont have to have bootloader unlocked to flash official boot images. you can go here https://cyngn.com/support and download the cm-13.1-ZNH2KAS254-bacon-signed-fastboot-d194f46bee.zip (scroll down to opo section) and/or go to http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 and get the download and follow directions in that post to flash phone
Click to expand...
Click to collapse
Have tried with both Normal Cyanogen and CyanogenMOD (that is what the bootlogo says on this phone) and both of them give the Device not unlocked error both on screen and in CMD
h11wiscan said:
Yeah idk then. Need more screenshots or info to help. Could be a million things.
-Are you using OEM USB cable?
-Did you install ALL drivers properly?
-Have you rebooted since installing ALL drivers?
-Have you tried using bacon toolkit on another computer? Sometimes simply switching computers can help.
-Did you try resetting phone to factory state using ABD/Bacon Toolkit?
-In Bacon Toolkit did you select the proper firmware and software version before attempting to use the program?
A few questions to ask yourself before we go further.
Click to expand...
Click to collapse
Okay I'm using the OEM cable (have tried both the one I got with this phone and the one I got with my Orginal OPO)
Have gone through the steps checking my drivers and they should be working and A OKAY, reboot and all.
Don't have access to another pc ATM but will look after the option.
Have tried all the option in Bacon toolkit to reset the phone to factory setting and non is working, tried to then use the recovery option to maybe get it to work that way but no dice. Have also tried sideloading both with Toolkit and with CMD and no luck their either. Took a picture of the screen when the sideload tries to work.
http://imgur.com/6L74N6J
The Firmware question is up in the air because I have never got it booted so I have no clue what firmware it has only hint that the boot screen is Cyanogen MOD READY and not just Cyanogen like on my other OPO
Hope it helps finding the problem
I super hard bricked my phone a while back, even lost a partition. I was finally able to get it back by flashing colorOS. took a few tries to get the program to recognize my phone, but finally got it flashed. The phone never booted all the way up with colorOs, but it fixed what needed fixed and I was then able to fastboot flash CM13, unlock bootloader and go from there. don't have that thread bookmarked, but it's here in the forums.
Edit: found thread http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
kenboyles72 said:
I super hard bricked my phone a while back, even lost a partition. I was finally able to get it back by flashing colorOS. took a few tries to get the program to recognize my phone, but finally got it flashed. The phone never booted all the way up with colorOs, but it fixed what needed fixed and I was then able to fastboot flash CM13, unlock bootloader and go from there. don't have that thread bookmarked, but it's here in the forums.
Edit: found thread http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
It sadly did not fix the problem it gives this problem and just stops working (need to close it in taskmanger) http://imgur.com/w1zOQFU.
Well the quest goes on
Mjallo said:
It sadly did not fix the problem it gives this problem and just stops working (need to close it in taskmanger) http://imgur.com/w1zOQFU.
Well the quest goes on
Click to expand...
Click to collapse
when you run the program, one of the columns should have a few random characters and "com" in it. if you dont see com in any of the columns, then the program is not seeing you phone. if you do see com, the click on that row and press start and it will show files being written in green showing progress. if phone is not being seen, follow that guide to the letter, specially if this is on a win7/8 machine. i will get my lappy out in a bit and give a few screenies on what it should look like, i wont actually flash my phone though.
kenboyles72 said:
when you run the program, one of the columns should have a few random characters and "com" in it. if you dont see com in any of the columns, then the program is not seeing you phone. if you do see com, the click on that row and press start and it will show files being written in green showing progress. if phone is not being seen, follow that guide to the letter, specially if this is on a win7/8 machine. i will get my lappy out in a bit and give a few screenies on what it should look like, i wont actually flash my phone though.
Click to expand...
Click to collapse
It sees it (you can see it in COM5 in the picture) and when the progress bar shows it just make a little green tip then just stops showing
are you running the program as administrator? right click on exe and select run as administrator? other than that, don't see why it's not flashing and I'm out of ideas, sorry.
So here is a string of steps I've already been through in trying to save my bricked Nexus 6: [Can't post outside link yet...]
Basically I got the 'your phone is corrupt' message from google and it kept forcibly shutting down. It would not boot up so someone suggested I side load a rescue OTA. At this point recovery existed and I went through all the steps and had it installing, only to fail mid-way through (~52%) and give me a 'read error' on my command prompt. I started the whole process over again just fine and it got to 73% before 'read error' failing again. I thought no big deal, I'll just keep doing this until it gets to 100%. Nope, recovery is gone. I cannot get there anymore. I start into Fastboot mode and scroll to recovery and hit power and it just goes to a new Fastboot screen and keeps flashing every time I try to select it. The Bootloader logs give me a 'failed to validate boot image: ret=-1' message and says 'Boot up failed.'
I can't find a single guide online that doesn't require recovery mode to work. At this point I don't care about my data and just want to get this phone working again before I throw in the towel and pay Motorola $175 for a refurb. I'm just barely over a year too. The Nexus 'expert' gave up and blamed the memory and maybe he is right but I wanted to run this by you guys first. This phone was completely stock and unrooted.
The only reason why I feel there is still a chance is because when I connect USB my computer reads it as an Android Device in Device Manager with 'Android Bootloader Interface' as a sub device. If the computer can read it, isn't there a chance that some kind of software exists that can forcibly load a new bootloader onto this phone without recovery? I'm 'competent' with computers and android phones but I haven't rooted or done any custom stuff in years so I'm at a loss for what's out there.
Thanks in advance for any help you can give me, even if it's to tell me I'm SOL.
Ok so far I have tried to load a custom recovery but that requires an unlocked bootloader. Then I tried using a toolkit to flash stock as a soft-bricked device but that also requires an unlocked bootloader and I can't unlock the damn bootloader. You know, I thought I was just playing it safe by leaving this phone as-is instead of playing around with it but it looks like I screwed myself by doing so.
Is this the wrong forum for this question?
JQ3 said:
Is this the wrong forum for this question?
Click to expand...
Click to collapse
Sorry for the delay
We have a dedicated help section for your device here
http://forum.xda-developers.com/nexus-6/help
Ask there to receive help
Good luck
Ok, I've been reading around the forum for about a week, trying to solve a problem with an original moto g (falcon). Basically my cousin got the moto g a few years back, and I, in my ignorance, tried to root the device for him. What I can remember was oem unlocking the bootloader with Motorola's unlock code through their website and adb. then my cousin freaked about the warranty warning on the boot animation, and decided against it. So cut to now, I'm a little more experienced, the phone's years old now, and he'd like to refresh it with a new rom, which I suggested, trying to help him. So forgetting what I'd originally done those years ago, I started the process of rooting the phone, installing a custom recovery, to hopefully put a lighter rom on it for him.
OK so it's a UK Retail on tesco mobile, moto g xt1032 running Android 5.1.
in bootloader menu it says "Device Locked status 2", dunno what this is in relation to.
first I checked the bootloader was still unlocked, and adb said it was. so I tried to use CF-autoroot to finish the job, but there was issues. it restarted the phone into fastboot mode, but when the script started, pc end did nothing, on the phone it said, "flashing unlock" and just sat there for 10-15mins doing nothing (i left it the time, just incase it was doing it).
So i read a little more, and found because i'd already unlocked the bootloader, I could just flash a custom recovery and root from adb? so I downloaded the latest twrp and tried. I was unable to do so. it said the partition wasn't the right size? should have documented it, but really didn't expect to run into any problems.
So I restarted and tried to do my usual fallback, and flash the factory image and start again, But couldn't find a source for the specific img, and tried to keep fighting on.
So I noticed that the phone wouldn't respond to adb or fastboot once in fastboot mode, when in android with usb debugging, no problems, in fastboot, didn't show up as adb devices?
I tried booting into the recovery from the bootloader menu, and got a no command. So there isn't a recovery, and I can't flash a new one? if i could find the stock recovery, I would try that.
so apart from deleting all his apps and settings, I hadn't solved the problem at all, and had to leave the job there as I couldn't find a solution.
I know this isn't the most detailed, but I've done this with quiet a few phones now, and felt I was pretty competent. I see everyday as an excuse to learn more, and like to think I have humility. So, I'm assuming I did something those years ago to damage the recovery? I'm running out of ideas, and was hoping someone could point me in the right direction?
I've lurked on xda for years, and learned so much about this kind of thing through my past experiences, but I'm stumped this time, and feel obliged to resolve the problem, as it was me who caused it.
TL DR
Can't flash recovery, no command when I try to open recovery, trying to either factory image back, or root/custom recovery it.
any insight would be much appreciated.
Hi. I just rooted and installed CM13 on an old XT1034 about two days ago. I am also sort of a ROM noob, I have ROMed a few devices, but usually but following strict step by step guides I have found here on XDA. Over the years I have some minor understanding of the process now.
I also got the "No command screen" when trying to get into TWRP recovery. The issue seems to be that if you reboot via ADB and the ROM launches it will automatically rewrite the recovery to the stock one, and when you try to go to recovery from fastboot, it gives you the "no command" error. Apparently you can get to the stock recovery from there by a hardware key combo, something like holding up vol for 10 sec then a quick press of power (I can't remeber the exact key sequence or what forum I read it in). If it does this you have to reflash TWRP again. This issue is mentioned here (http://wiki.cyanogenmod.org/w/Install_CM_for_falcon) in step 8 about installing recovery. What I ended up doing was after the flash of TWRP via ADB, I manually powered down, then manually bood into fastboot by holding volume down and power, and selecting recovery. This was a bit fiddly and I had to attempt it a few times but eventually it worked and TWRP installed.
The issue with the phone not being recognized may be due to incorrect drivers. I had no issue with this because I installed the official driver package from Motorola. It is available in their website in the developer section. I don't have the URL right now.
Hopefully this helps, for me CM13 Official has been an a stable fresh start for this old device.
Hello.
I did something wrong while trying to flash TWRP on my pixel 2, I am now stuck at the bootloader, and I cannot boot System or Recovery. While at the bootloader screen, it says Device State : unlocked. If I try to get to download mode, it says "ERROR: Operation Denied". If I try to go into recovery, it says "ERROR: Slot Unbootable: Load Error". If I try "Start", I get the same error message.
Also, adb or fastboot don't seem to be able to "see" the pixel connected to the computer. I believe my cables are good since I was able to flash Magisk and reflash the whole system with them before bricking it.
Can anyone help?
Thanks!
stanelie said:
Hello.
I did something wrong while trying to flash TWRP on my pixel 2, I am now stuck at the bootloader, and I cannot boot System or Recovery. While at the bootloader screen, it says Device State : unlocked. If I try to get to download mode, it says "ERROR: Operation Denied". If I try to go into recovery, it says "ERROR: Slot Unbootable: Load Error". If I try "Start", I get the same error message.
Also, adb or fastboot don't seem to be able to "see" the pixel connected to the computer. I believe my cables are good since I was able to flash Magisk and reflash the whole system with them before bricking it.
Can anyone help?
Thanks!
Click to expand...
Click to collapse
happened to my walleye too , and managed to bring it back to life . check this thread for a possible solution. https://forum.xda-developers.com/pixel-2/help/december-factory-image-to-broken-t3875213
Thanks!
I missed that thread while researching this issue.
I will try these things when I get back from work next week.
Thanks again!
stanelie said:
Thanks!
I missed that thread while researching this issue.
I will try these things when I get back from work next week.
Thanks again!
Click to expand...
Click to collapse
Just as a reference for anyone else who needs the fix and can't be bothered opening another thread.
SOLUTION: At the menu where it is stuck and saying device fail etc, plug in your usb cable to the mobile, press and hold the POWER button for 10 seconds, it will now recognise your phone under fastboot.
Once that is cleared, it's pretty much straightforward flashing latest pixel 2 image via fastboot and problem solved.
sidenote: Issue came with anyone who tried to flash december security updates and above as of what I heard.
I will try that, thanks.
So, several things :
Holding down the power button had no effect other than restarting the boot menu, but Fastboot never became available.
Opening up the phone and disconnecting the battery and reconnecting it made Fastboot available again. This would be in line with other users that let the phone battery discharge completely before regaining fastboot access.
Sidenote : opening up this phone is not for the faint of heart. I managed to damage something on the motherboard doing so (probably a static electricity discharge), the screen ended up displaying gibberish. I was able to salvage my phone by replacing the motherboard. I had ordered a replacement motherboard when I thought all was lost with no fastboot, and I had it on hand. Expensive little sucker...
stanelie said:
Hello.
I did something wrong while trying to flash TWRP on my pixel 2, I am now stuck at the bootloader, and I cannot boot System or Recovery. While at the bootloader screen, it says Device State : unlocked. If I try to get to download mode, it says "ERROR: Operation Denied". If I try to go into recovery, it says "ERROR: Slot Unbootable: Load Error". If I try "Start", I get the same error message.
Also, adb or fastboot don't seem to be able to "see" the pixel connected to the computer. I believe my cables are good since I was able to flash Magisk and reflash the whole system with them before bricking it.
Can anyone help?
Thanks!
Click to expand...
Click to collapse
Same thing happened to me except I never even tried to root. Just pulled the phone out of my pocket, and the little Android dude was belly up. It's showing device locked - and although I had it in Dev. mode from weeks back (thought USB Debugging was enabled) it fails to respond to adb commands, boot-loader mode, etc.
...Looks like Google laid an egg with this one.
Pixel 2 - "ERROR: Slot Unbootable: Load Error"
If you get the above error you will find that you cannot boot into recovery and the phone stays in the bootloader screen each time you try to start the phone. If your bootloader is unlocked you might be able to recover your phone to flash a stock image and revive. My problem started when I tried to restore a nandroid backup after trying out Android Q beta 1. I got the error mentioned above.
Most of the people recommended that I get a replacement from Google support as they had tried everything but it didn't work. Well right here in XDA Pixel 2 forum there is a solution waiting to be used. I am reproducing it from the post titled
"December factory image seems to have broken fastboot enumeration"
Quote
A possible way to resurrect a bricked Pixel 2...
Hey guys, I have just been able to get mine alive. The device started to be recognized (USB/fastboot) after about 10 unsuccessful attempts to start the system: "Start", from bootloader.
So what exactly happened and what I did:
1. Bricked a Pixel 2.
2. It started into bootloader and showed the "slot unbootable" error.
3. The device was not recognized by any of my machines at all, lsusb did not show anything new in the system, and, respectively, fastboot did not see the device.
4. The default option in the bootloader is "Start" if I remember correctly. So I just pressed the power button and did not release it until I noticed a vibration. It were about 10 unsuccessful attempts of system loading before that vibration.
5. Right after that vibration I connected a generic (NONAME) USB-C <-> USB-A cable to both the device and my Linux machine, and fortunately the device was recognized by the system and fastboot was able to detect the device correctly. So I flashed the a factory image, and it went just fine.
Unquote
Let me confirm that this works. I kept the power button down while the phone was connected via USB to the PC for at least 5 mins. During several reboots suddenly I got a beep from the PC which indicated that ADB was working. I flashed a stock image and voila the pixel 2 is back in operation.
Hope this helps several other people who might have this problem.
ashokabs said:
If you get the above error you will find that you cannot boot into recovery and the phone stays in the bootloader screen each time you try to start the phone. If your bootloader is unlocked you might be able to recover your phone to flash a stock image and revive. My problem started when I tried to restore a nandroid backup after trying out Android Q beta 1. I got the error mentioned above.
Most of the people recommended that I get a replacement from Google support as they had tried everything but it didn't work. Well right here in XDA Pixel 2 forum there is a solution waiting to be used. I am reproducing it from the post titled
"December factory image seems to have broken fastboot enumeration"
Quote
A possible way to resurrect a bricked Pixel 2...
Hey guys, I have just been able to get mine alive. The device started to be recognized (USB/fastboot) after about 10 unsuccessful attempts to start the system: "Start", from bootloader.
So what exactly happened and what I did:
1. Bricked a Pixel 2.
2. It started into bootloader and showed the "slot unbootable" error.
3. The device was not recognized by any of my machines at all, lsusb did not show anything new in the system, and, respectively, fastboot did not see the device.
4. The default option in the bootloader is "Start" if I remember correctly. So I just pressed the power button and did not release it until I noticed a vibration. It were about 10 unsuccessful attempts of system loading before that vibration.
5. Right after that vibration I connected a generic (NONAME) USB-C <-> USB-A cable to both the device and my Linux machine, and fortunately the device was recognized by the system and fastboot was able to detect the device correctly. So I flashed the a factory image, and it went just fine.
Unquote
Let me confirm that this works. I kept the power button down while the phone was connected via USB to the PC for at least 5 mins. During several reboots suddenly I got a beep from the PC which indicated that ADB was working. I flashed a stock image and voila the pixel 2 is back in operation.
Hope this helps several other people who might have this problem.
Click to expand...
Click to collapse
I don't even know how to thank you. I almost had a heart attack watching my Pixel bricked. Thanks man!
Save my day! I just keep pressing power button and fastboot response finally!
Can this be done if the device is locked?
_Kalyan said:
I don't even know how to thank you. I almost had a heart attack watching my Pixel bricked. Thanks man!
Click to expand...
Click to collapse
Does ur bootloader locked or unlocked?
---------- Post added at 11:36 AM ---------- Previous post was at 11:36 AM ----------
ashokabs said:
If you get the above error you will find that you cannot boot into recovery and the phone stays in the bootloader screen each time you try to start the phone. If your bootloader is unlocked you might be able to recover your phone to flash a stock image and revive. My problem started when I tried to restore a nandroid backup after trying out Android Q beta 1. I got the error mentioned above.
Most of the people recommended that I get a replacement from Google support as they had tried everything but it didn't work. Well right here in XDA Pixel 2 forum there is a solution waiting to be used. I am reproducing it from the post titled
"December factory image seems to have broken fastboot enumeration"
Quote
A possible way to resurrect a bricked Pixel 2...
Hey guys, I have just been able to get mine alive. The device started to be recognized (USB/fastboot) after about 10 unsuccessful attempts to start the system: "Start", from bootloader.
So what exactly happened and what I did:
1. Bricked a Pixel 2.
2. It started into bootloader and showed the "slot unbootable" error.
3. The device was not recognized by any of my machines at all, lsusb did not show anything new in the system, and, respectively, fastboot did not see the device.
4. The default option in the bootloader is "Start" if I remember correctly. So I just pressed the power button and did not release it until I noticed a vibration. It were about 10 unsuccessful attempts of system loading before that vibration.
5. Right after that vibration I connected a generic (NONAME) USB-C <-> USB-A cable to both the device and my Linux machine, and fortunately the device was recognized by the system and fastboot was able to detect the device correctly. So I flashed the a factory image, and it went just fine.
Unquote
Let me confirm that this works. I kept the power button down while the phone was connected via USB to the PC for at least 5 mins. During several reboots suddenly I got a beep from the PC which indicated that ADB was working. I flashed a stock image and voila the pixel 2 is back in operation.
Hope this helps several other people who might have this problem.
Click to expand...
Click to collapse
Works on bootloader state locked or not?
SoKa1993 said:
Does ur bootloader locked or unlocked?
---------- Post added at 11:36 AM ---------- Previous post was at 11:36 AM ----------
Works on bootloader state locked or not?
Click to expand...
Click to collapse
If the boot loader is locked look for a script for unlocking the bootloader from recovery or bootloader state. I did find it but cannot remember. My bootloader was unlocked so I did not have to use it.
ashokabs said:
Pixel 2 - "ERROR: Slot Unbootable: Load Error"
If you get the above error you will find that you cannot boot into recovery and the phone stays in the bootloader screen each time you try to start the phone. If your bootloader is unlocked you might be able to recover your phone to flash a stock image and revive. My problem started when I tried to restore a nandroid backup after trying out Android Q beta 1. I got the error mentioned above.
Most of the people recommended that I get a replacement from Google support as they had tried everything but it didn't work. Well right here in XDA Pixel 2 forum there is a solution waiting to be used. I am reproducing it from the post titled
"December factory image seems to have broken fastboot enumeration"
Quote
A possible way to resurrect a bricked Pixel 2...
Hey guys, I have just been able to get mine alive. The device started to be recognized (USB/fastboot) after about 10 unsuccessful attempts to start the system: "Start", from bootloader.
So what exactly happened and what I did:
1. Bricked a Pixel 2.
2. It started into bootloader and showed the "slot unbootable" error.
3. The device was not recognized by any of my machines at all, lsusb did not show anything new in the system, and, respectively, fastboot did not see the device.
4. The default option in the bootloader is "Start" if I remember correctly. So I just pressed the power button and did not release it until I noticed a vibration. It were about 10 unsuccessful attempts of system loading before that vibration.
5. Right after that vibration I connected a generic (NONAME) USB-C <-> USB-A cable to both the device and my Linux machine, and fortunately the device was recognized by the system and fastboot was able to detect the device correctly. So I flashed the a factory image, and it went just fine.
Unquote
Let me confirm that this works. I kept the power button down while the phone was connected via USB to the PC for at least 5 mins. During several reboots suddenly I got a beep from the PC which indicated that ADB was working. I flashed a stock image and voila the pixel 2 is back in operation.
Hope this helps several other people who might have this problem.
Click to expand...
Click to collapse
I have same problem. I use Pixel 2 and Fedora. My question is, what i exactly should do? I mean the steps. I didn't get that beep from my laptop. But I got the vibration when I hold the power button when it's not connected to USB. Please Help me.
Sorry my english isn't that good.