Related
Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.
Schizophonic said:
Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.
Click to expand...
Click to collapse
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.
okantomi said:
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.
Click to expand...
Click to collapse
Last night I followed this videolinked in http://www.youtube.com/watch?v=OYc1lVWm7ks to Unlock OEM my device
I think that worked fine because it didn't throw up any hiccups.
I then followed this http://forum.xda-developers.com/showthread.php?t=1242241 to root it. It didn't have superuser so I downloaded it and installed it and then tried Terminal on the "SU" command. Said I did not have 'permissions'
This morning, I then followed this Youtbue link http://www.youtube.com/watch?v=ZsVpY0PDwtQ and after the first reboot of puting the new .img, it failed to reboot. Now I'm stuck on the M screen.
I think I managed to get my computer to pick up the device in adb fastboot because it responds to that. However when I type in adb devices it doesn't pick up anything...
Next after messing around I managed to flash it to the boot.img on this, http://forum.xda-developers.com/showthread.php?t=1049901
It flashed it ( I think) and worked without errors unlike the other flash I tried today, and its still stuck in M screen.
BTW, this is a UK Wifi Zoom.
Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser
Schizophonic said:
Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser
Click to expand...
Click to collapse
It sounds like you are on the right track. Hang in there, you'll make it!
Do you have access to an Ubuntu OS? when you connect an android device to a PC running Ubuntu it will mount the internal memory to the PC which makes it much easier to browse the partitions. Also, Go ahead and reflash the CWM recovery through Rom manager (if thats available to UK users) so that hopefully youll get a fresh recovery.img to work with. As far as ADB not noticing the xoom, you probably erased the adb drivers, and is the usb cord youre using 100% data transferable type? I about pulled my hair out a few times because adb wouldnt recognize my phone but realised I was using an older micro usb cable that only allowed electrical current for charging, not data transfer capable. You might also be able to find a clean nandroid backup file from a fellow UK xoom owner, that you trust, and see if they dont mind sending you their backed up boot-img and system-img. Just some guesses, but sounds like you got it pretty well figured out
Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"
Schizophonic said:
Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"
Click to expand...
Click to collapse
My guide, which is highlighted in the Xoom Heaven thread has a large section on setting up your adb files etc.
http://forum.xda-developers.com/showthread.php?t=1249798
Rooted 3.2 Xoom FAIL
Hi All,
Not the best way to join the boards but I am in deep....
I have a canadian wifi xoom on 3.2. I followed these instructions (How to root 3.2 on US WiFi & Verizon 3G XOOM! (Windows and Mac)) to root my xoom and was having issues with a wifi error.
I decided to use the Canadian boot.img file and when I rebooted the xoom got stuck on the moto logo and is no longer recognized by my computer.
I have tried resetting through the android recovery (I dont have anything 3rd party installed) but no luck. I am afraid that this thing is a total write off.
Any thoughts? Thanks
Blair
hi im pretty new here a friend of mine gave me her lg c800 mytouch to try and fix it for her.. not sure what she did she said she rooted the phone and the root was successful but i have a good idea that she doesnt know what she was doing..i will post a pic of the error screen im getting. but it says
E:Cant find misc
E:cant find misc
Finding update package...
E:unknown volume for path [sd:/download/adb_fastboot_and_other_tools.Zip]
E:Cant mount SDCARD:/download/adb_fastboot_and_other_tools.zip
Installation aborted
facory reset failed
restart factory reset..
now im far from a pro at this i know a lil more about computers and Ios devices..but ive rooted a few phones and to me it looks like she unzipped adb fastboot on her phone from her sd card??
ive tried holding F..A..vol down..and power..Nothing..
ive tried volume up .volume down and power still nothing..
BUT if i hold E..vol UP and power it brings me to a white screen that says S/W update
the big problem is the phone wont stay on long enough to do anything on the computer it stays on 3 sec. then reboots to same screen (computer says phone is unplugged) then phone just keeps restarting.
but the phone WILL stay on when i put it on the S/W update screen..but computer wont recognize the phone at all on that screen
ive tried the adb and fastboot commands but the phone wont stay recognized..it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
well thanks ahead of time if anyone has any input or solution
and hopefully all this will make sense to someone lol
i think this pic will work.. if not ill try again
any ideas please?? or am i completely out of luck?
When you say:
delilah25 said:
it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
Click to expand...
Click to collapse
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
post-mortem said:
When you say:
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
Click to expand...
Click to collapse
Yes In Adb device list it shows the phone and then says recovery..but after that I don't have enough time to type any other commands ..the phone is also recognized in "my computer" as removable device then when the phone restarts seconds later it says device unplugged ..and just keeps restarting on its own till I remove the battery...I just read on the forum in a post that Adb will recognize the phone if it's off but I remove the battery and put it back in and plug in USB and phone turns on and keeps restarting won't even let me turn it off!! I'm losing patience with this thing lol
But I don't get why the error mentions fastboot? Not my phone so if it's not fixable I don't really care but I'm just the stuborn type when it comes to fixing electronics ..again thanks ahead of time to anyone that helps cuz I'm completely lost on this one
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
i have the same problem
post-mortem said:
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
Click to expand...
Click to collapse
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
diabolus ae said:
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
Click to expand...
Click to collapse
Normally, if you want to flash a custom recovery through fastboot, people will tell you to run 2 commands:
fastboot flash recovery nameofimagefile.img
fastboot reboot recovery
Since you don't have time to execute those 2 commands, you can tell it to just boot from the .img file, without flashing over your current recovery. (This is actually proper form, as you can test if the .img file works properly without damaging your existing recovery.) The way you do that is to 1st copy a recovery .img file to the root of your SD card, then execute the following 1 command:
fastboot boot nameofimagefile.img
Since you only have ~3 seconds, type the command in, and wait for the right instant to hit enter on the keyboard. If the command is successfully sent to the phone, it will reboot into that .img.
See if that works for you. Good luck.
Hello everybody here at XDA, ( this is my first post here so bare with me here)(english is not my native language either)
My device:
Nexus 5 - hammerhead D821(H) 16GB
BL version - HHZ12h
BB version M8974A-2.0.50.2.26
Secure boot enabled
lock state unlocked
today i got a "broken" nexus 5 that is in boot loop with the google logo and it wont boot into any .img
At the start i read the pinned posts and found this tutorial: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
followed it step by step. but unfortunatly it didnt help my situation. there werent any errors or such kind.
i also tried this tutorial with other images but nothing worked.
When i go to the recovery mode and press the power button the phone get into the google logo and i can see some sort of strange stripes in like a milisecond but then it just gets into the boot loop.
i really think ive tried everything accept for relocking the bootloader but cant imaging that this could be the problem.
If you guys need more info please just ask me.
Hope you guys can help me out here.
Martin
Really thought XDA forums would be able to help me.
Any admins or mods or any other veteran that could help me out?
If that's not working for you, you can try using the Nexus Root Toolkit just to be sure.
If that doesn't work, than it could be hardware related, and not much you can do about that.
Hi All,
I have boot-loop problem for Nexus5 as described earlier .
As I was able to boot in Fastboot
I went for factory reset, and saw FAILED (remote: flash write failure).
I have tried to flash countless time with same error.
Then I read this thread and considered phone memory is toasted.
LG service-center have quoted me around $180 for mother board replacement.
Today I tried twrp project to boot in openrecovery and start an adb shell.
I was able to see file system of my phone.
These following folders are empty:
/boot
/cache
/data
In system folder there is only bin folder and which is empty.
/system
I have gotten this far, is internal memory roasted
Any direction or suggestions welcomed :good:
mesh120673 said:
Hi All,
I have boot-loop problem for Nexus5 as described earlier .
As I was able to boot in Fastboot
I went for factory reset, and saw FAILED (remote: flash write failure).
I have tried to flash countless time with same error.
Then I read this thread and considered phone memory is toasted.
LG service-center have quoted me around $180 for mother board replacement.
Today I tried twrp project to boot in openrecovery and start an adb shell.
I was able to see file system of my phone.
These following folders are empty:
/boot
/cache
/data
In system folder there is only bin folder and which is empty.
/system
I have gotten this far, is internal memory roasted
Any direction or suggestions welcomed :good:
Click to expand...
Click to collapse
Are you sure your bootloader is unlocked?
When you boot the phone in Fastboot mode, does the "lock state" say UNLOCKED?
If so, then yeah, your internal memory could be huffed.
spookytay said:
Are you sure your bootloader is unlocked?
When you boot the phone in Fastboot mode, does the "lock state" say UNLOCKED?
If so, then yeah, your internal memory could be huffed.
Click to expand...
Click to collapse
It says Locked.
I unlock it using ./fastboot oem unlock
I just got my N5 and was messing around. Rooted it and loaded a rom, but it would just seem to hang at the spinning dots forever. Though I didn't wait THAT long like some users did and had success.
I can't find the link I used, but googling around should get you there. I ended up restoring a factory image via fastboot. I ended up using THIS PROGRAM to root the phone. This program also has a restore option and gives an option to check in case you are in boot loop status. Give it a shot.
Yes I do believe you have to unlock the bootloader as well.
Nurmi_CEO said:
I just got my N5 and was messing around. Rooted it and loaded a rom, but it would just seem to hang at the spinning dots forever. Though I didn't wait THAT long like some users did and had success.
I can't find the link I used, but googling around should get you there. I ended up restoring a factory image via fastboot. I ended up using THIS PROGRAM to root the phone. This program also has a restore option and gives an option to check in case you are in boot loop status. Give it a shot.
Yes I do believe you have to unlock the bootloader as well.
Click to expand...
Click to collapse
Yes the bootloader must be unlocked before you can do ANYTHING to the phone, it's what's there to protect it from being hacked/changed or whatever. So before you can write anything to your phone, you need to make sure you OEM UNLOCK the bootloader.
[Solved!] Nexus 5 boot loop at Google logo
I found a solution on Youtube comment (can't post url, too new user).
You just have to press quickly the Power button durint 1-2 minutes (continue untill the Android animation start, don't stop when the Google logo appear)3
As crazy as it sounds, IT WORKS
Wow .. i had the exact same problem (Startup loop on Nexus 5 that shows the Google logo and restarts, over and over), and i pressed the power button quicky about 30 or 40 time until after I saw the startup animation and my phone came back to life. I have been charging it with cables other than the one that came with the phone for a few months now, and it has been acting strangely while plugged in (randomly clicking things on the screen, and enabling my camera and taking pictures on its own, etc.). So, to avoid problems in the future, I think I'll invest in a wireless charger. Thanks JackNUMBER for the easy solution. I hope this works for others as well. Saved me a trip to the store.
Ok, I've been reading around the forum for about a week, trying to solve a problem with an original moto g (falcon). Basically my cousin got the moto g a few years back, and I, in my ignorance, tried to root the device for him. What I can remember was oem unlocking the bootloader with Motorola's unlock code through their website and adb. then my cousin freaked about the warranty warning on the boot animation, and decided against it. So cut to now, I'm a little more experienced, the phone's years old now, and he'd like to refresh it with a new rom, which I suggested, trying to help him. So forgetting what I'd originally done those years ago, I started the process of rooting the phone, installing a custom recovery, to hopefully put a lighter rom on it for him.
OK so it's a UK Retail on tesco mobile, moto g xt1032 running Android 5.1.
in bootloader menu it says "Device Locked status 2", dunno what this is in relation to.
first I checked the bootloader was still unlocked, and adb said it was. so I tried to use CF-autoroot to finish the job, but there was issues. it restarted the phone into fastboot mode, but when the script started, pc end did nothing, on the phone it said, "flashing unlock" and just sat there for 10-15mins doing nothing (i left it the time, just incase it was doing it).
So i read a little more, and found because i'd already unlocked the bootloader, I could just flash a custom recovery and root from adb? so I downloaded the latest twrp and tried. I was unable to do so. it said the partition wasn't the right size? should have documented it, but really didn't expect to run into any problems.
So I restarted and tried to do my usual fallback, and flash the factory image and start again, But couldn't find a source for the specific img, and tried to keep fighting on.
So I noticed that the phone wouldn't respond to adb or fastboot once in fastboot mode, when in android with usb debugging, no problems, in fastboot, didn't show up as adb devices?
I tried booting into the recovery from the bootloader menu, and got a no command. So there isn't a recovery, and I can't flash a new one? if i could find the stock recovery, I would try that.
so apart from deleting all his apps and settings, I hadn't solved the problem at all, and had to leave the job there as I couldn't find a solution.
I know this isn't the most detailed, but I've done this with quiet a few phones now, and felt I was pretty competent. I see everyday as an excuse to learn more, and like to think I have humility. So, I'm assuming I did something those years ago to damage the recovery? I'm running out of ideas, and was hoping someone could point me in the right direction?
I've lurked on xda for years, and learned so much about this kind of thing through my past experiences, but I'm stumped this time, and feel obliged to resolve the problem, as it was me who caused it.
TL DR
Can't flash recovery, no command when I try to open recovery, trying to either factory image back, or root/custom recovery it.
any insight would be much appreciated.
Hi. I just rooted and installed CM13 on an old XT1034 about two days ago. I am also sort of a ROM noob, I have ROMed a few devices, but usually but following strict step by step guides I have found here on XDA. Over the years I have some minor understanding of the process now.
I also got the "No command screen" when trying to get into TWRP recovery. The issue seems to be that if you reboot via ADB and the ROM launches it will automatically rewrite the recovery to the stock one, and when you try to go to recovery from fastboot, it gives you the "no command" error. Apparently you can get to the stock recovery from there by a hardware key combo, something like holding up vol for 10 sec then a quick press of power (I can't remeber the exact key sequence or what forum I read it in). If it does this you have to reflash TWRP again. This issue is mentioned here (http://wiki.cyanogenmod.org/w/Install_CM_for_falcon) in step 8 about installing recovery. What I ended up doing was after the flash of TWRP via ADB, I manually powered down, then manually bood into fastboot by holding volume down and power, and selecting recovery. This was a bit fiddly and I had to attempt it a few times but eventually it worked and TWRP installed.
The issue with the phone not being recognized may be due to incorrect drivers. I had no issue with this because I installed the official driver package from Motorola. It is available in their website in the developer section. I don't have the URL right now.
Hopefully this helps, for me CM13 Official has been an a stable fresh start for this old device.
Backstory: I upgraded to android 10 a few weeks ago, aside from a few user apps breaking, there weren't any system issues. Recently, I received another update (seems like a patch ?) to android 10 and updated as well. I'm not sure if this recent update actually completed.
Last night, it seems like my phone went into a boot loop while I was sleeping. When I woke up the phone was hot, and each boot was so short that there was no opportunity to go into recovery mode. I pretty much had no choice other than to let the battery drain.
So I walked away and came back a while later to a peculiar recovery screen that said "Cannot load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device."
There's only 2 options: "Try again" and "Factory data reset". `adb devices` from the PC is unable to detect my pixel 3 here. "Try again" simply attempts to boot, and I just return to this same screen again (at least it doesn't loop now). I'm reluctant to factory reset as I want to at least have the chance to back up some data.
I am able to enter fastboot from this screen using Power + Volume Down. `fastboot devices` from the PC is able to detect the phone. However, because the bootloader is locked (haven't unlocked the bl since i started using nexus/pixel phones), I don't know if there's much i can do here.
My question is, is there anything that I can try at this point to boot into android 10, recover some data, then do a factory reset ?
From fastboot, what happens if you try entering recovery? If you can get into recovery, you could sideload the OTA. https://developers.google.com/android/ota
sliding_billy said:
From fastboot, what happens if you try entering recovery? If you can get into recovery, you could sideload the OTA. https://developers.google.com/android/ota
Click to expand...
Click to collapse
It's not the "normal" recovery mode. There was the message "Cannot load android system. Your data may be corrupt." Other only options are:
- "Try again" , basically a reboot, which eventually brings me back to this screen
- "Factory Data Reset"
adb is unable to detect the phone in this mode, so I am unable to sideload an OTA.
superc0w said:
It's not the "normal" recovery mode. There was the message "Cannot load android system. Your data may be corrupt." Other only options are:
- "Try again" , basically a reboot, which eventually brings me back to this screen
- "Factory Data Reset"
adb is unable to detect the phone in this mode, so I am unable to sideload an OTA.
Click to expand...
Click to collapse
Not knowing what is available with the BL locked... Is the new rescue mode option one of the power up/down choices from your BL/Fastboot screen? That rescue mode is supposed to allow ADB command to work. If not, you are going to have to do a factory reset and if that doesn't help contact Google and RMA. Ability to get out of bricks is the biggest reason to unlock your BL (if you purchased a Google unlockable BL phone) unless you purchased a Verizon phone and can't. In that case, back to the last comment about factory reset/RMA.
superc0w said:
It's not the "normal" recovery mode. There was the message "Cannot load android system. Your data may be corrupt." Other only options are:
- "Try again" , basically a reboot, which eventually brings me back to this screen
- "Factory Data Reset"
adb is unable to detect the phone in this mode, so I am unable to sideload an OTA.
Click to expand...
Click to collapse
Had this happen and I had to do a factory reset prior to unlocking bootloader ,which as was mentioned above is way easier to fix because you can reflash factory image without wiping all data
same thing happened to me; the previous comments gave me the outline of what was needed, so thank you. now for the op:
1. on the screen that offers try again or factory erase, choose "try again"
2. IMMEDIATELY press and hold volume down
3. when you reach the bootloader screen, you may release volume down
4. this is the standard bootloader screen for pixel 3. you should be able to cycle options do so to select 'recovery" (or whatever it says. I'm not going to reboot my phone to see exactly what it says, but I'm sure you get the idea)
Hi, I have encountered device corrupt error on my pixel 4Xl few days back, after reaching out to google support and waiting for 4hrs I haven't received any resolution. In few instances device worked normally for few hours but kept on switching off. I did factory reset once as suggested but currently issue is still persistent. I am out of warranty by few months so I cannot send it google support. Please help me in fixing this issue.
Prudhvi89 said:
Hi, I have encountered device corrupt error on my pixel 4Xl few days back, after reaching out to google support and waiting for 4hrs I haven't received any resolution. In few instances device worked normally for few hours but kept on switching off. I did factory reset once as suggested but currently issue is still persistent. I am out of warranty by few months so I cannot send it google support. Please help me in fixing this issue.
Click to expand...
Click to collapse
Sounds like this problem. https://forum.xda-developers.com/t/...xxxx_sn-xxxxxxxx.4205331/page-7#post-85981389
Prudhvi89 said:
Hi, I have encountered device corrupt error on my pixel 4Xl few days back, after reaching out to google support and waiting for 4hrs I haven't received any resolution. In few instances device worked normally for few hours but kept on switching off. I did factory reset once as suggested but currently issue is still persistent. I am out of warranty by few months so I cannot send it google support. Please help me in fixing this issue.
Click to expand...
Click to collapse
So we know you get the corrupt message, support isn't helping, that in a few instances it worked normally for short periods, a factory reset didn't help, and yer out of warranty.
But can u get to fastboot? Is OEM unlocking on? Can u turn oem unlocking on in one of the "few instances", if it's not on?
If u can do the above, i'd follow googles instructions to unlock the bootloader and use the flash-all script and flash the latest firmware.
AsItLies said:
So we know you get the corrupt message, support isn't helping, that in a few instances it worked normally for short periods, a factory reset didn't help, and yer out of warranty.
But can u get to fastboot? Is OEM unlocking on? Can u turn oem unlocking on in one of the "few instances", if it's not on?
If u can do the above, i'd follow googles instructions to unlock the bootloader and use the flash-all script and flash the latest firmware.
Click to expand...
Click to collapse
Hi, thanks for responding back. Yes OEM is enabled on my device. I did reach out to google forums as well for support, they redirected to XDA for support with respect to flashing device.
PS: I am not at all a tech person and have very limited understanding in this area, I am just trying to save my phone.
Prudhvi89 said:
Hi, thanks for responding back. Yes OEM is enabled on my device. I did reach out to google forums as well for support, they redirected to XDA for support with respect to flashing device.
PS: I am not at all a tech person and have very limited understanding in this area, I am just trying to save my phone.
Click to expand...
Click to collapse
so then first follow this link and choose which version of android you'd like to flash to your 4xl (probably the latest one).
On that site click 'link' next to the chosen version and it will download the firmware zip file (this is the latest generic version: SP1A.211105.002, Nov 2021 --- if you have verizon or other choose the latest for that carrier).
Then you'll need to follow the directions near the top of that page that starts with the following:
Flashing instructions​The factory image downloaded from this page includes a script that flashes the device, typically named flash-all.sh (On Windows systems, use flash-all.bat instead).
etc etc etc.
If you have trouble, post back here and people will try to assist you.
cheers
AsItLies said:
so then first follow this link and choose which version of android you'd like to flash to your 4xl (probably the latest one).
On that site click 'link' next to the chosen version and it will download the firmware zip file (this is the latest generic version: SP1A.211105.002, Nov 2021 --- if you have verizon or other choose the latest for that carrier).
Then you'll need to follow the directions near the top of that page that starts with the following:
Flashing instructions​The factory image downloaded from this page includes a script that flashes the device, typically named flash-all.sh (On Windows systems, use flash-all.bat instead).
etc etc etc.
If you have trouble, post back here and people will try to assist you.
cheers
Click to expand...
Click to collapse
Hi, thanks for quick response. I am getting below error, not sure how to correct it.
Prudhvi89 said:
Hi, thanks for quick response. I am getting below error, not sure how to correct it.
Click to expand...
Click to collapse
So you're getting an error indicating you're trying to do something but it can't do it because the boot loader is locked. Obvious.
but here's what's not obvious; what are u trying to do? and why are u trying to do it?
from the looks of the output, yer trying to switch slots? why? there's nothing in those instructions I referenced above that tells u to switch slots? All yer gonna do is first unlock the bootloader and then use the flash all script.
maybe yer reading the wrong directions? Look again what I posted, find those exact words in the directions, do what's under that heading, not any other heading.
Currently I am not able to switch on my phone !!!
AsItLies said:
So you're getting an error indicating you're trying to do something but it can't do it because the boot loader is locked. Obvious.
but here's what's not obvious; what are u trying to do? and why are u trying to do it?
from the looks of the output, yer trying to switch slots? why? there's nothing in those instructions I referenced above that tells u to switch slots? All yer gonna do is first unlock the bootloader and then use the flash all script.
maybe yer reading the wrong directions? Look again what I posted, find those exact words in the directions, do what's under that heading, not any other heading.
Click to expand...
Click to collapse
Currently I am not able to switch on the device !!
Prudhvi89 said:
Currently I am not able to switch on the device !!
Click to expand...
Click to collapse
That sounds ominous. You may now be afflicted with the pixel 'stuck in edl mode' problem, which unfortunately there's no solution for.
Try this; plug the device to pc using usb cable, then look in device manager, if you see the device connected with QUSB_BULK_CID (etc), that means it's in EDL mode.
if that's the case, follow this thread to learn more about that, but unfortunately there is no fix, as yet. And I've read just yesterday google is replacing devices with this issue for some.
Just an fyi, if your device is in this state, it's not anything you did, it's the fault of the device. Some believe it to be hardware failure, which seems the most plausible explanation.
AsItLies said:
That sounds ominous. You may now be afflicted with the pixel 'stuck in edl mode' problem, which unfortunately there's no solution for.
Try this; plug the device to pc using usb cable, then look in device manager, if you see the device connected with QUSB_BULK_CID (etc), that means it's in EDL mode.
if that's the case, follow this thread to learn more about that, but unfortunately there is no fix, as yet. And I've read just yesterday google is replacing devices with this issue for some.
Just an fyi, if your device is in this state, it's not anything you did, it's the fault of the device. Some believe it to be hardware failure, which seems the most plausible explanation.
Click to expand...
Click to collapse
Ok got it !! Thanks for your prompt response & support.
The "Cannot load Android system, Your data may be corrupt" error is known as Rescue Party. Fortunately, fixing it should be relatively simple.
Try dirty flashing the factory image. Do not attempt to flash a patched boot image; leave everything stock.
If that fails, select "Factory data reset". It will wipe your phone, but it should reboot into Android system.
That bootloader message "Your device is corrupt. It can't be trusted" means that the signed key for Verified Boot somehow got screwed up. In this case, I would also recommend reflashing the factory image.
In both cases, the easiest option is to use the Android Flash Tool. It's like a GUI for flashing the factory image.