[URGENT] Error SW CHECK CHECK FAIL: [aboot] Fused 5> Binary 1 - General Questions and Answers

Hello everyone !
I have a serious problem on my cell phone and I am desperate to solve it, I am even willing to reward for help (I mean it).
I have a Galaxy S8 (SM-G950U1 SnapDragon), I bought it at BestBuy Mobile and unfortunately do not know which carrier it is.
I was trying to do Root in it, but it was giving failure, it appeared the following message:
Error SW CHECK CHECK FAIL: [aboot] Fused 5> Binary 1
From what I understand I'm trying to flash an AP / PDA / Firmware in a different version, but how can I find out which version to download the correct firmware?
Thank you !!!

Related

"sw REV CHECK FAIL: Fused 2 > Binary 0" error on my s3 sch-i535!! :(

Hi everyone! i have a sch-i535 device, whenever i flash a rom in odin mode it keep on saying "sw REV CHECK FAIL: Fused 2 > Binary 0"! i cant do anything! and i followed one solution when i odin with that , my odin process was success but again even after that i get the same error 'sw REV CHECK FAIL: Fused 2 > Binary 0" when i try to flash a rom!
every time when i follow different solutions im getting different different errors! not the solution!
i was getting
"secure fail kernal!"
"secure fail system!"
'kites3 also saying the connected device is not supported!"
"secure fail : kernel system software not authorized by verizon wireless has been found on your phone galaxy s3 i535"
"your upgrade process has been interferred please use software repair assistant.... blah blah blah..!"
and some are saying i cannot downgrade to 4.1 as was there lastly there on 4.4.4! and i can no where find 4.4.4 fireware which can be used with odin as well!! all the link i tried was saying " file not found" error!! ( omg )
anybody please tell me what i should do now?! . I'm new to xda and this is my first post.
anybody please help me the correct step by step procedure to get back my phone alive again??! i know this xda forum has a lot of mind blowing experts in it please do help me guys Thanks
ranjithstar256 said:
Hi everyone! i have a sch-i535 device, whenever i flash a rom in odin mode it keep on saying "sw REV CHECK FAIL: Fused 2 > Binary 0"! i cant do anything! and i followed one solution when i odin with that , my odin process was success but again even after that i get the same error 'sw REV CHECK FAIL: Fused 2 > Binary 0" when i try to flash a rom!
every time when i follow different solutions im getting different different errors! not the solution!
i was getting
"secure fail kernal!"
"secure fail system!"
'kites3 also saying the connected device is not supported!"
"secure fail : kernel system software not authorized by verizon wireless has been found on your phone galaxy s3 i535"
"your upgrade process has been interferred please use software repair assistant.... blah blah blah..!"
and some are saying i cannot downgrade to 4.1 as was there lastly there on 4.4.4! and i can no where find 4.4.4 fireware which can be used with odin as well!! all the link i tried was saying " file not found" error!! ( omg )
anybody please tell me what i should do now?! . I'm new to xda and this is my first post.
anybody please help me the correct step by step procedure to get back my phone alive again??! i know this xda forum has a lot of mind blowing experts in it please do help me guys Thanks
Click to expand...
Click to collapse
I believe you get that error if you try to flash an older ROM once you are on 4.3 or newer.
They probably meant 4.4.2, the Odin flashable version of this can be found at http://www.sammobile.com/firmwares/database/SCH-I535/ Unfortunately I don't know if this will be your solution or not, hopefully it is.
dawgdoc said:
I believe you get that error if you try to flash an older ROM once you are on 4.3 or newer.
They probably meant 4.4.2, the Odin flashable version of this can be found at http://www.sammobile.com/firmwares/database/SCH-I535/ Unfortunately I don't know if this will be your solution or not, hopefully it is.
Click to expand...
Click to collapse
downloading that 4.4.2 firmware... will tell you after i flash with that.. Thank you for the response
Update:
First of all Thanks a lot @dowgdoc !! this 4.4.2 rom got PASSED in odin! and now the new problem is when it got restarted it is stuck on the red verizon logo screen! can you please tell me solution for this issue?

S7 SM-G930W8 8.0 sp nov 18. Need help dg to 7.0

Hey, I'm trying to downgrade this phone but just cant figure it out. Trying to use odin but its not working. Phone says sw rev check fail(bootloader) device 5 binary 3.

SM-G930P fails to flash/root

I've been trying to root my Galaxy s7 - G930P, but it fails every time,
OEM unlock is set to true, USB debugging enabled, PC whitelisted. //not sure if that last one matters
Device information:
samsung/heroqltespr,
android: 8.0.0,
firmware: R16NW/G930PVPSBCTA1
Snapdragon
I've followed a few tutorials, First I tried https://bit.ly/3fXMHwa (The original link was censored for some reason.), but it failed. No error in odin.
The second was https://forum.xda-developers.com/galaxy-s7/how-to/samsung-galaxy-s7-sm-g930p-root-xposed-t3502829, Also a fail. This time the error was something like FAIL! (auth) I've got a snip for this one https://cdn.discordapp.com/attachments/710567590342426684/712349332757544991/unknown.png
Both times there's been an error on the phone, SW REV CHECK FAIL : Fused 11 > Binary 1
Is there any kind of documentation for odin errors?
ADB drivers & environment are properly installed, odin run as administrator when I use it, I removed google accounts on the device, I think I saw somewhere google accounts might interfere with flashing.
I also tried flashing TWRP , but the error was 'secure check fail : recovery'
My friends and I don't know what to do, any suggestions? I can't flash any firmware other than current.
I was able to flash my current firmware.
I can't think if I missed anything, Alexa#9029 is my discord tag if anything more is needed.
Killerdoghound said:
I've been trying to root my Galaxy s7 - G930P, but it fails every time,
OEM unlock is set to true, USB debugging enabled, PC whitelisted. //not sure if that last one matters
Device information:
samsung/heroqltespr,
android: 8.0.0,
firmware: R16NW/G930PVPSBCTA1
Snapdragon
I've followed a few tutorials, First I tried https://bit.ly/3fXMHwa (The original link was censored for some reason.), but it failed. No error in odin.
The second was https://forum.xda-developers.com/galaxy-s7/how-to/samsung-galaxy-s7-sm-g930p-root-xposed-t3502829, Also a fail. This time the error was something like FAIL! (auth) I've got a snip for this one https://cdn.discordapp.com/attachments/710567590342426684/712349332757544991/unknown.png
Both times there's been an error on the phone, SW REV CHECK FAIL : Fused 11 > Binary 1
Is there any kind of documentation for odin errors?
ADB drivers & environment are properly installed, odin run as administrator when I use it, I removed google accounts on the device, I think I saw somewhere google accounts might interfere with flashing.
I also tried flashing TWRP , but the error was 'secure check fail : recovery'
My friends and I don't know what to do, any suggestions? I can't flash any firmware other than current.
I was able to flash my current firmware.
I can't think if I missed anything, Alexa#9029 is my discord tag if anything more is needed.
Click to expand...
Click to collapse
The failure "Rev Check Fail" means the root file your trying to flash is for a much earlier version of the firmware which no longer works.
You need to find a root method which works on Version 11 of the firmware. Fused=firmware version on the phone, Binary=firmware/root version your trying to use. You cannot flash firmware or root which is older than which is already on the device.
It a pain in the ass I'm afraid. The S7 is an older phone and developers have moved on creating roots for the newer phones.
Thanks
Is there any way to root? I don't really care how complex or difficult, I just want root access. If not is there a way to change boot animation without root?
Thanks for the information though, now I at least understand what the error means. For some reason I can't find any docs on errors.
Any idea why flashing twrp won't work? Is it because it's also old?
I forgot to mention this in the original post:
---------------------------------
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G930P
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
WARRENTY VOID: 0x0
QUALCOM SECUREBOOT: ENABLE
RP SWREV: B11(2.1.1.1.1) K11 S11
SECURE DOWNLOAD : ENABLE
//error
SECURE CHECK FAIL : recovery
---------------------------------
Error when flashing TWRP heroqltechn I picked this one because I know my devices is not Exynos,
PROCESSOR Type - Qualcomm Snapdragon 820
GPU - Adreno 530
dude s7 qualcomm models cant be rooted because of qualcomm secure boot and no one has made to break it
I also have the same cell phone SAMSUNG GALAXY S7 MODEL: G930P, ANDROID 8.0 OREO, FIRMWARE: G930PVPSBCTA1, I am also interested in having root access.
Does someone has the stock firmware for the SM-G930P? I'm stuck with a bricked one I think, It had a G930V rom installed, so I managed to reinstall it once and it got working for a week but with random reboots, and then it got stuck on bootloop till today, I've tried a lot of SM-G930P rom variants without luck, they install correctly but when it reboots, it says "recovery booting" and it never boots... I only know it is binary version 11, if i try to install any other binary version it will give me error..

Question Samsung s20+ sw rev. check fail(bootloader) device 8 binary 6 please help

Samsung s20+ sw rev. check fail(bootloader) device 8 binary 6 please help
mesayf said:
Samsung s20+ sw rev. check fail(bootloader) device 8 binary 6 please help
Click to expand...
Click to collapse
This error means your are flashing older firmware than what is on your phone. You will need bootloader version 8 or higher. It will be the 5th number from the right of the firmware name.
market version devices (consumer devices) aren't meant to be flashed backwards... it's set so that only the technicians/engineers working on the device can do that. You'd have to know how to unlock that security feature for you to flash backwards on your own.

Question Need Help

guys how to fix this kind of error when flashing firmware in my A12​​SW Rev Check Fail Fused 2 Binary 1​

Categories

Resources