I was running lineage-16.0-20181203_184022-UNOFFICIAL-enchilada just fine with open gapps nano and Magisk 17.1.
I attempted to upgrade to lineage-16.0-20181208_183559-UNOFFICIAL-enchilada, but I ran into issues with gapps force closing.
I attempted to restore my TWRP nandroid backups, but the attempts at restoring them just put me in a bootloop into TWRP.
Therefore, I am attempting to get back to OOS 9.0.2, OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9, with a clean flash, following the process:
Fastboot into TWRP with fastboot boot twrp-3.2.3-x_blu_spark_v9.86_op6.img
Wipe -> Advanced Wipe -> Cache, System, Data, Internal Storage
adb push OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9.zip and twrp-3.2.3-x_blu_spark_v9.86_op6.zip
Install -> OOS 9.0.2 and then TWRP
Reboot into System
No matter how many times I try this, the first boot fails with a vibration from the phone and it reboots into the blu_spark TWRP.
I have also tried the above process from inside the installed TWRP instead of from a fastbooted TWRP. I have also tried the above process with lineage-16.0-20181203_184022-UNOFFICIAL-enchilada.zip instead of OOS.
What could possibly be wrong? Isn't this a completely clean install?
MaxRabbit said:
I was running lineage-16.0-20181203_184022-UNOFFICIAL-enchilada just fine with open gapps nano and Magisk 17.1.
I attempted to upgrade to lineage-16.0-20181208_183559-UNOFFICIAL-enchilada, but I ran into issues with gapps force closing.
I attempted to restore my TWRP nandroid backups, but the attempts at restoring them just put me in a bootloop into TWRP.
Therefore, I am attempting to get back to OOS 9.0.2, OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9, with a clean flash, following the process:
Fastboot into TWRP with fastboot boot twrp-3.2.3-x_blu_spark_v9.86_op6.img
Wipe -> Advanced Wipe -> Cache, System, Data, Internal Storage
adb push OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9.zip and twrp-3.2.3-x_blu_spark_v9.86_op6.zip
Install -> OOS 9.0.2 and then TWRP
Reboot into System
No matter how many times I try this, the first boot fails with a vibration from the phone and it reboots into the blu_spark TWRP.
I have also tried the above process from inside the installed TWRP instead of from a fastbooted TWRP. I have also tried the above process with lineage-16.0-20181203_184022-UNOFFICIAL-enchilada.zip instead of OOS.
What could possibly be wrong? Isn't this a completely clean install?
Click to expand...
Click to collapse
Try installing magisk too.
mikex8593 said:
Try installing magisk too.
Click to expand...
Click to collapse
Thanks for the suggestion. Tried installing magisk in between OOS and the TWRP, and then also tried installing OOS, TWRP, rebooting, and installing magisk. No luck either way.
Well, this was a nightmare. Finally fixed it by:
fastbooting into twrp
wiping everything in twrp
flashing oos 9.0.2
NOT installing twrp
bootlooping into oneplus recovery
clearing ALL data through oneplus recovery (after backing up via ADB)
reboot
phone booted up just fine
Wow. Never seen those particular steps mentioned.
After that, I was able to flash OOS 9.0.2 again, then flash lineage-16.0-20181203_184022-UNOFFICIAL-enchilada & TWRP, boot LOS, reboot into TWRP, wipe everything, flash lineage-16.0-20181203_184022-UNOFFICIAL-enchilada again, boot into LOS, reboot into TWRP, restore my system, data, and boot backups from TWRP, and I'm finally back up and running with a fully working backup.
MaxRabbit said:
Well, this was a nightmare. Finally fixed it by:
fastbooting into twrp
wiping everything in twrp
flashing oos 9.0.2
NOT installing twrp
bootlooping into oneplus recovery
clearing ALL data through oneplus recovery (after backing up via ADB)
reboot
phone booted up just fine
Wow. Never seen those particular steps mentioned.
After that, I was able to flash OOS 9.0.2 again, then flash lineage-16.0-20181203_184022-UNOFFICIAL-enchilada & TWRP, boot LOS, reboot into TWRP, wipe everything, flash lineage-16.0-20181203_184022-UNOFFICIAL-enchilada again, boot into LOS, reboot into TWRP, restore my system, data, and boot backups from TWRP, and I'm finally back up and running with a fully working backup.
Click to expand...
Click to collapse
this could have been done in twrp. all you had to do was format data
the correct way is this.
fastbooting into twrp
flashing oos 9.0.2
flashing twrp, to keep twrp.
format data.
install any mod you want, like root.
reboot
this is require only when going from aosp to oos again.
MrSteelX said:
this could have been done in twrp. all you had to do was format data
the correct way is this.
fastbooting into twrp
flashing oos 9.0.2
flashing twrp, to keep twrp.
format data.
install any mod you want, like root.
reboot
this is require only when going from aosp to oos again.
Click to expand...
Click to collapse
How come that would have worked, but wiping system and data and then installing OOS 9.0.2 doesn't? Shouldn't you end up at the same point either way, with a clean OOS 9.0.2 in system and wiped data?
Format is the answer.
MaxRabbit said:
How come that would have worked, but wiping system and data and then installing OOS 9.0.2 doesn't? Shouldn't you end up at the same point either way, with a clean OOS 9.0.2 in system and wiped data?
Click to expand...
Click to collapse
just simply flash oss9.0.2 two time using twrp then get hold of 9.0.2 boot img go back to twrp and the select flash image flash the image and let it boot.
if it works toss a thanks.
MaxRabbit said:
Well, this was a nightmare. Finally fixed it by:
fastbooting into twrp
wiping everything in twrp
flashing oos 9.0.2
NOT installing twrp
bootlooping into oneplus recovery
clearing ALL data through oneplus recovery (after backing up via ADB)
reboot
phone booted up just fine
Wow. Never seen those particular steps mentioned.
After that, I was able to flash OOS 9.0.2 again, then flash lineage-16.0-20181203_184022-UNOFFICIAL-enchilada & TWRP, boot LOS, reboot into TWRP, wipe everything, flash lineage-16.0-20181203_184022-UNOFFICIAL-enchilada again, boot into LOS, reboot into TWRP, restore my system, data, and boot backups from TWRP, and I'm finally back up and running with a fully working backup.
Click to expand...
Click to collapse
Thank you for this. I was trying to dirty flash 9.0.2 to fix a notification issue and ended up in the same situation as you. Format ended up fixing it. Only crappy part is I lost about all my text messages with my SO. Google said it has a 2mb backup for SMS so I'm hoping it got all 30k+ of it
MrSteelX said:
this could have been done in twrp. all you had to do was format data
the correct way is this.
fastbooting into twrp
flashing oos 9.0.2
flashing twrp, to keep twrp.
format data.
install any mod you want, like root.
reboot
this is require only when going from aosp to oos again.
Click to expand...
Click to collapse
Tried this and it ended up causing the exact same problem. The folks installing the new OB8/9 seems to be having similar issues. Not sure what's going on.
its because of security patch. 9.0.2 has nov sec patch, lineage you flashed has dec sec patch. i have experienced this in pixel rom. just flash lineage Nov build, then wipe data and system and flash OOS 9.0.2 and twrp.
do a clean flash
MaxRabbit said:
I was running lineage-16.0-20181203_184022-UNOFFICIAL-enchilada just fine with open gapps nano and Magisk 17.1.
I attempted to upgrade to lineage-16.0-20181208_183559-UNOFFICIAL-enchilada, but I ran into issues with gapps force closing.
I attempted to restore my TWRP nandroid backups, but the attempts at restoring them just put me in a bootloop into TWRP.
Therefore, I am attempting to get back to OOS 9.0.2, OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9, with a clean flash, following the process:
Fastboot into TWRP with fastboot boot twrp-3.2.3-x_blu_spark_v9.86_op6.img
Wipe -> Advanced Wipe -> Cache, System, Data, Internal Storage
adb push OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9.zip and twrp-3.2.3-x_blu_spark_v9.86_op6.zip
Install -> OOS 9.0.2 and then TWRP
Reboot into System
No matter how many times I try this, the first boot fails with a vibration from the phone and it reboots into the blu_spark TWRP.
I have also tried the above process from inside the installed TWRP instead of from a fastbooted TWRP. I have also tried the above process with lineage-16.0-20181203_184022-UNOFFICIAL-enchilada.zip instead of OOS.
What could possibly be wrong? Isn't this a completely clean install?
Click to expand...
Click to collapse
You know if all else fails you could always download the Qualcomm MSM tool and boot into Qualcomm mode (with the phone off hold vol down button for about 10-15 seconds and plug into computer), you won't see anything on the screen, load up the tool and it shall put u back to full stock. This will solve all and any sort of bricking which if you flash alot you will by default probably learn how to use
fastboot into twrp
Flash TWRP within twrp
Format all data.
Reboot recovery
transfer OOS
Flash OOS
Flash TWRP
Reboot recovery
Flash OOS
Flash TWRP
Reboot recovery
Flash kernel/magisk/etc
Reboot system.
I just want to tell you that I love you. The format data finally fixed this for me.
MrSteelX said:
this could have been done in twrp. all you had to do was format data
the correct way is this.
fastbooting into twrp
flashing oos 9.0.2
flashing twrp, to keep twrp.
format data.
install any mod you want, like root.
reboot
this is require only when going from aosp to oos again.
Click to expand...
Click to collapse
Related
Hello everyone! Need help.
I was testing some Xposed modules and then the system crashed and started no more.
I entered the twrp and made a wipe in all the options that there was to do.
The problem is that now the phone does not start any more, there is no way to get into the recovery or the room. When you turn it on, it goes straight to the recovery qualcoom screen. How should I proceed?
Sounds like you wiped system aswell...
Fastboot twrp should work.
In fastboot twrp flash twrp zip
Reboot to twrp
Flash OOS
Flash twrp
Reboot to twrp
Flash magisk
Should get you booted atleast
reflash oxygen os in twrp after wiping data and cache
matze19999 said:
reflash oxygen os in twrp after wiping data and cache
Click to expand...
Click to collapse
I can not access twrp because I've made a full cache, dalvik, system, and internal memory wipe. Only fastboot mode opens
You should can access TWRP because you didn't wipe recovery partition
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3903272
Follow the instructions care full...you device will work
Thanks man <3
I unlocked my phone yesterday and installed orangefox recovery in it. However after flashing custom rom, it keeps rebooting back to recovery. Have no idea how to solve this. Any solutions?
hackmonker said:
I unlocked my phone yesterday and installed orangefox recovery in it. However after flashing custom rom, it keeps rebooting back to recovery. Have no idea how to solve this. Any solutions?
Click to expand...
Click to collapse
Try wiping data once and reboot to system
Nutya said:
Try wiping data once and reboot to system
Click to expand...
Click to collapse
Tried that. not working. Also if its relevent system, vendoe, etc are not mounted. only data, cache, and microsd is mounted. Have no idea why.
Me too faced this kind of issue, peter's TWRP worked for me, follow instructions from here
Ok It worked. No need to flash the dm Verity for orange recovery. What I did was simple.
1. Factory reset (Did this step before also)
2. Format Data (Also Did this step)
3. Flash rom (Of course did this too)
4. Then reboot to RECOVERY again, not to system. (did not do this step before). Go to reboot part and click reboot to recovery, not to system.
5. After that reboot to system and it should work. Mine did.
Solved
I to had same problem but mine worked after installing custom ROM install FCrypt disabler.zip from recovery then reboot and enjoy.
Download FCrypt disabler.zip for Redmi note 7 Pro from Google.
Flash any zip which disables dm verity things. Suggestion: flash lazyflasher zip.
heelo guys
im having a problems flashiing roms. i tryed Paranandroid, RR and crDroid...
after i flash them i get bootloop into TWRP. whac can i be doing wrong?
the steps i do are this:
flash ROM -Flash TWRP - REBOOT to TWRP - Flash Gapps - Flash Magisk - Then bootloop
can anyone please help me?
anyone? please?
first install OOS 10 on both slots (i have open beta 4)..than boot to OOS 10, not setup! Then boot TWRP and factory reset, not FORMAT DATA!!! Then reboot TWRP and install ROM, TWRP, reboot, install Gapps and Magisk (optional)
mcboums said:
first install OOS 10 on both slots (i have open beta 4)..than boot to OOS 10, not setup! Then boot TWRP and factory reset, not FORMAT DATA!!! Then reboot TWRP and install ROM, TWRP, reboot, install Gapps and Magisk (optional)
Click to expand...
Click to collapse
hello mate
and when i install Rom, do i need to install on both slots or i can have one has backup (its what i have been doing till now)?
and when i factory reset, what will i lose?
Well, it is difficult to say. Usually, every ROM has its thread, its instructions and its community that helps with problems related to installing that ROM.
It could be a few things:
1) I do not see any mention about wiping data. Usually you need to wipe data and wipe system partition in twrp before you install a new ROM. Maybe that is the issue. However, what you need to wipe is ROM specific.
2) Check prerequisites, what ROM version you need to be running before you flash. Sometimes that matters.
3) OnePlus 6 has these A/B slots that I do not fully understand. From what I have read, if you are running on slot A, update installs on slot B, and then you reboot to slot B and cycle continues. BUT DO NOT TRUST ME ON THIS. You should read yourself. Anyway, sometimes people recommend flashing both slots A and B. For some ROMs. For LineageOS, for example, that is not necessary.
oh, factory reset damn i would want to configure everything again
I think first.
You have to WIPE data, all. Factory wipe option.
Then boot into twrp
First, flash OOS, followed by TWRP
Reboot to Recovery using twrp itself.
And then again flash OOS and TWRP.
Reboot to recovery again (using the option in twrp itself)
Finally, then install your rom followed by gapps etc etc
Then it should work....
is there anyway to do this without factory reset?
no
When I flashed Latest Rom Pixel and Bliss Rom, When I tried to boot system, there is above message like No OOS in system, Are you want to boot system?. When i booted, i didn't see anything Unusual. Actually I wiped Both slots, System,data and cache befor installing OOS. Is it? I used mauronofrio 3.3.16. Is it the problem of twrp? In pie Rom I didn't see such messages. Used Blu_Spark 3.3.1.X V 101. Any one knows, the reason for such messages.
dont wipe system when installing. Just flash the rom over it and wipe other partitions such as cache and stuff, just exclude system.
sschacko said:
When I flashed Latest Rom Pixel and Bliss Rom, When I tried to boot system, there is above message like No OOS in system, Are you want to boot system?. When i booted, i didn't see anything Unusual. Actually I wiped Both slots, System,data and cache befor installing OOS. Is it? I used mauronofrio 3.3.16. Is it the problem of twrp? In pie Rom I didn't see such messages. Used Blu_Spark 3.3.1.X V 101. Any one knows, the reason for such messages.
Click to expand...
Click to collapse
It didn't say NO OOS BUT it is saying NO OS(OPERATING SYSTEM) is installed it is due to not flashin or twrp recovery after flashing rom or not flashing magisk...if you did not flashed magisk your twrp is gone...
Hi Team,
Today i was flashing custom os in oneplus 6 via one youtuber videos
He has selected TWRP wipe menu
Advance -> system , data , Davic/ cache
i did same then he installed the os i also did the same and flash twrp
After doing roboot the system TWRP given me error no os was installed i ignored that message and proceed to next
After system was rebooted im only getting fastboot mode and no other options also im unable to install now any TWRP in my system
can some one help me please
Maybe try format data.
Go to wipe then advance wipe and format data.
If it doesnt work then use msmtool to go back to stock rom and start again.
Don't trust every YT videos you see, NEVER wipe system on op6 or you get this result.
Now you can reinstall TWRP from fastboot and reflash stock OOS twice, if it did not work try to flash stock fastboot firmware
here is a simple solution..
Reboot Recovery
Wipe Data, System, Cache
Flash OOS & TWRP
Reboot into recovery (Ignore No OS Installed Warning)
Flash OOS & TWRP Again
Reboot
Done
if you want to Flash Custom ROM, Here is guide
Reboot Recovery
Wipe Data, System, Cache
Flash OOS & TWRP
Reboot into recovery (Ignore No OS Installed Warning)
Flash OOS & TWRP Again
Reboot into Recovery
Flash Custom ROM & TWRP
Reboot into Recovery
Flash Gapps, Magisk Latest & No-Varity zip is had data decrypted
Reboot
Done
Hitman478™ said:
Don't trust every YT videos you see, NEVER wipe system on op6 or you get this result.
Now you can reinstall TWRP from fastboot and reflash stock OOS twice, if it did not work try to flash stock fastboot firmware
Click to expand...
Click to collapse
Any reason why we shouldn't delete system partition in op6?
Sent from my ONEPLUS A6000 using XDA Labs
Bintang Krisna said:
Any reason why we shouldn't delete system partition in op6?
Sent from my ONEPLUS A6000 using XDA Labs
Click to expand...
Click to collapse
The system also holds the recovery....i made that mistake once and i had to use MSM tool to restore my phone. Big waste of my time to a dumb mistake.