Hello everyone, I have a Huawei P20, the store demo is installed, how can I cancel without unlocking the bootloader? From developer options the demo is not active, it goes into demo for the demo retail app that I can not delete
stino.cele said:
Hello everyone, I have a Huawei P20, the store demo is installed, how can I cancel without unlocking the bootloader? From developer options the demo is not active, it goes into demo for the demo retail app that I can not delete
Click to expand...
Click to collapse
Erecovery ?
how do you erecovery? I do not know Huawei procedures
stino.cele said:
how do you erecovery? I do not know Huawei procedures
Click to expand...
Click to collapse
Power off.
Pres simultaneously power button and volume + .
When phone vibrates lose power button but keep pressing volume +
until rescue screen appears.
Select : download latest firmware
Log in to your WiFi. If everything works correct the phone downloads automatically the latest firmware. And also installs it.
curtricias said:
Power off.
Pres simultaneously power button and volume + .
When phone vibrates lose power button but keep pressing volume +
until rescue screen appears.
Select : download latest firmware
Log in to your WiFi. If everything works correct the phone downloads automatically the latest firmware. And also installs it.
Click to expand...
Click to collapse
I've tried so but you have only options restarting to clear cache or factory reset
It's because you accessed Recovery mode and not Erecovery mode.
Erecovery mode won't help as it will install demo firmware again.
Using 1122334455 as retail mode app's code won't after a click on upper left screen won't help.
Debloating via command line using dev option 'USB debugging' may partially help.
Dev option 'demo mode' is different from the huawei demo mode you actually experiencing.
Your best options is to order for your unlock code ; it costs around 25€.
Then you could root and rebrand.
oslo83 said:
It's because you accessed Recovery mode and not Erecovery mode.
Erecovery mode won't help as it will install demo firmware again.
Using 1122334455 as retail mode app's code won't after a click on upper left screen won't help.
Debloating via command line using dev option 'USB debugging' may partially help.
Dev option 'demo mode' is different from the huawei demo mode you actually experiencing.
Your best options is to order for your unlock code ; it costs around 25€.
Then you could root and rebrand.
Click to expand...
Click to collapse
Now I understand why nothing has changed after the update! How do I get the bootloader unlock code? how we proceed because Huawei does not issue more codes, paying is OK, but who should I ask?
I PM'ed you infos.
oslo83 said:
I PM'ed you infos.
Click to expand...
Click to collapse
Oslo83, can you please provide me the info?
I'm in the same situation.
oslo83 said:
I PM'ed you infos.
Click to expand...
Click to collapse
same here.. can you post me the info??..
oslo is a guru, my smartphone is now working 100% after his intervention! thank you so much
Hi,
can somebody help me with removing on the P20 lite the demo/retail version?
Thx
oslo83 said:
I PM'ed you infos.
Click to expand...
Click to collapse
It's posible in P20 Pro?
Thx.
Sure
hi Oslo,
I'm in the same case, can you do the something for me, for now i only removed the retail apps but it's not fully working.
thank's a lot.
Khorey
Hi im in same situation can you guide please
For P20 ;
Your best option is to order online for your bootloader's unlock code from a third-party seller ;
It's sold less than 25€ on Global-unlocking-solutions.miiduu.com
Once oem-frp & bootloader are both unlocked,
Then you could root,
Then install a nocheck,
Then rebrand via adb,
Then hwota flash the new region firmware.
Beware of xloader and GPU-TURBO downgrading in the process of rebranding, I guess it could brick your device.
There is already some copy/pasted outdated threads for rebranding COL, EML and CLT but they are outdated and not fool and time proofed...
help
stino.cele said:
oslo is a guru, my smartphone is now working 100% after his intervention! thank you so much
Click to expand...
Click to collapse
Greetings, I need to fix an equal, you could tell me how was the process, my email is [email protected]
khor3y said:
hi Oslo,
I'm in the same case, can you do the something for me, for now i only removed the retail apps but it's not fully working.
thank's a lot.
Khorey
Click to expand...
Click to collapse
Same case. Maybe nocheck doesn't work in some cases.
What's ur version/model?
HUAWEI P20 store demo problem
oslo83 said:
It's because you accessed Recovery mode and not Erecovery mode.
Erecovery mode won't help as it will install demo firmware again.
Using 1122334455 as retail mode app's code won't after a click on upper left screen won't help.
Debloating via command line using dev option 'USB debugging' may partially help.
Dev option 'demo mode' is different from the huawei demo mode you actually experiencing.
Your best options is to order for your unlock code ; it costs around 25€.
Then you could root and rebrand.
Click to expand...
Click to collapse
HI oslo83,
Seems that you are the right guy for my problem (removing HUAWEI P20 store demo).
Can you help me?
Thanks !!
Related
Hi,
I have root my phone. disabled some unnecessary apps, but i decided to factory reset, but when i open the phone top and bottom buttons were gone, no notifications. Now I cant do anything. How can i restore the whole OS back?
I have bring the stock recovery back but now i stuck!
now i cannot enter to bootlader
Trying with adb but it says not authorized. Authorize notify cant appear on screen i think its because huawei home not work properly.
And I cant even install anything from google play or local apk.
I think its bricked please help...
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Easy Computer said:
http://forum.xda-developers.com/showthread.php?t=3075332
did you try this?
Sent from my HUAWEI MT7-TL10
Click to expand...
Click to collapse
Hi,
I have tried almost every steps except latest version update, because there is no latest version on Huawei Turkish website, latest one shows B133 but mine was B137, so it gives an error while starting the update from dload folder.
Hisuite doesnt recognize the phone.
Now I am downloading Huawei MT7-L09 CEE&Nordic European Channel V100R001C00B137SP03 Android 4.4.2 EMUI 3.0 This is not Turkish version but i hope I can install it with 3 button update procedure...
No luck...
It gave me "software install failed" error...
Now im scared to factory reset my phone... I hope you get to find a solution bro.
EzerchE said:
No luck...
It gave me "software install failed" error...
Click to expand...
Click to collapse
Easy Computer said:
Now im scared to factory reset my phone... I hope you get to find a solution bro.
Click to expand...
Click to collapse
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
i hope you get it to work again. good luck bro :good:
EzerchE said:
Hi, i find a solution,
actually i find a way to enter fastboot mode without inside of android os.
connect mate 7 to pc, while its connected press 3 buttons and hold,
it will open in recovery mode adb,
then command: fastboot bootloader
you are in fastboot.
But now i bricked it so bad mistakenly.
Its enters looped rescue mode but it doesnt connects to fastboot.
But i have find a solution for it too.
While its in bricked rescue mode press and hold Volume down + power buttons,
it will enters to fastboot mode.
Now i am trying to flash files to repair rescue mode but i still didnt find how to repair it...
Click to expand...
Click to collapse
tuddu said:
If you are in fadtboot mode you should be able to flash the stock recovery (the correct one!!!) via adb command. Then try 3buttons procedure. Please be carefull with the sd card, since most of them don't work in 3b mode. Try several btand of SD.
Click to expand...
Click to collapse
Hi,
I flashed stock: boot.img, recovery.img, custom.img, system.img and cache.img inside from fastboot mode but no luck...
It gives this error immediately after reboot:
Error!
Func NO: 12 (FUNC_LOAD_IOM3)
Error NO: 1
And can't enter 3 buttons upgrade procedure
I think some system files are missing and it doesnt boot or enter to recovery mode...
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
EzerchE said:
Its so sad there is not so much users and professional support about Mate 7. I find the ways to enter bootlader without entering the OS by myself.
But its so easy to brick the phone so all users be very careful when flashing recovery and wiping the phone. As for as i know there is no way to fix my problem even by Huawei technical services. (A guy from another forum, sent his bricked Mate7, they returned the money to him he tolds..)
I could'nt repair the phone so I returned it to seller, thanks for the seller's return policy 14 day no rules accepts return. So I sent my device to seller and returned my money back. I dont know which device should I get.
Good luck all.
Click to expand...
Click to collapse
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
alexre123 said:
Hi Ezerche. I'm so sorry your phone got bricked and you couldn't repair... I don't know how to root and I couldn't help you. What did you do wrong? I saw on this forum other users who had successfully rooted mate 7.
Now I think I will never root this phone, my 30 days return policy has expired. SO there was no way to repair your phone?
I found your problem on an chinese forum: https://translate.google.ro/transla....vmall.com/thread-3432260-1-1.html&edit-text=
and in italian forum : https://translate.google.ro/transla...mate-7-rescue-mode.html#post344249&edit-text=
You got lucky because you got your money back. What did you told them what happend with the phone? You told them the truth or something else?
If you can live without root you can get another mate 7.
Click to expand...
Click to collapse
Hi Alex,
I have rooted my phone, problem happened while i am wiping the boot, system and cust from CWM Recovery before the install new rom. I think its deleted something about sensors (on chinese forum they talking about iom3 error is related with sensors)
So phone didnt boot again.
I returned it to seller without any excuse. I just said I didnt satisfied with the phone. And they accept return and paid the money back in same day.
HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.
hi guys no one helps me???
please help i haven't found solution
after long time searching the web and googling try chinese web sites and other english forums, sending mails in english chinese.... NOTHING RIEN NADA
i'm so disappointed my phone still not working and i'm so frustrated to see that no one gives me an answer!!!?
Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/
so, was your problem solved?
Skorpi58 said:
Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/
Click to expand...
Click to collapse
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:
smich_ayane said:
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:
Click to expand...
Click to collapse
if you can't open your device it's a big problem
try this
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically
xda-luffy said:
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically
Click to expand...
Click to collapse
where the link for hisuite 4.0?
orly1001 said:
where the link for hisuite 4.0?
Click to expand...
Click to collapse
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10
xda-luffy said:
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10
Click to expand...
Click to collapse
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA
orly1001 said:
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA
Click to expand...
Click to collapse
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
how?please help even i will pay you just to to work my mobile again. my mobile show below of android logo is phone locked and rescue mode enter.
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
after i click resume button shows recover and when i click recover it show your device is not supported for system recovery
Same problem here
There is no solution to this problem. I hope that if Huawei launches the official Marshmallow firmware, then we would be able to rectify this problems.. Otherwise I tried a lot but no results.. Best of Luck...
If u find any solution.. plz do let me know...
smich_ayane said:
HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.
Click to expand...
Click to collapse
For information "one-key recovery" method throw hisuite 4.0 needs unlock bootloader i have already try it without result so if some one have another idea he's welcome
This is exactly my problem, where i had flashed the update of Marshmallow, and it seems it wasn't correct. Now it is on boot loop and can't recover in fastboot. there should be a solution !! surprised even i can't shut it down, did they think about these kind of problems?
I have same problem
someone help me
how can I obtain unlock code??!!!!!!
Big_lord said:
I have same problem
someone help me
how can I obtain unlock code??!!!!!!
Click to expand...
Click to collapse
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...
oserib said:
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...
Click to expand...
Click to collapse
it's not worked
Get bootloader unlock code from dc-unlocker.com. it costs you 4 euro.
Sent from my JAZZ using XDA Free mobile app
Hi,
I bought P9 Lite 2017 kown also as P8 Lite 2017 and did factory reset from the stock recovery.
Now I have problem with Factory reset protection. The problem is that I bought it from other person and I have lost the number from him. So I tried some tutorials I have found online but nothing functioning.
So now I am able to turn on phone until Verify account page...maybe I can reinstall firmware but I am not sure which version. Its form Austria and unlocked, and if I want to install custom recovery I have to go in Developer settings and enable USB debugin and OEM unlock but I cant do it now.
So any opinion is appreciated. Thanks
lesa84 said:
Hi,
I bought P9 Lite 2017 kown also as P8 Lite 2017 and did factory reset from the stock recovery.
Now I have problem with Factory reset protection. The problem is that I bought it from other person and I have lost the number from him. So I tried some tutorials I have found online but nothing functioning.
So now I am able to turn on phone until Verify account page...maybe I can reinstall firmware but I am not sure which version. Its form Austria and unlocked, and if I want to install custom recovery I have to go in Developer settings and enable USB debugin and OEM unlock but I cant do it now.
So any opinion is appreciated. Thanks
Click to expand...
Click to collapse
Hi, that is interesting. If you want to fix it without oem.. Maybe impossible but if not, then boot into erecovery (connect to your computer then vol up+ power) After this you can disconnect, hopefully it will fix your phone.
Hi guys, please help me with huawei id on this phone, i try everything i have found, but nothing of solutions didnt work. Sorry my bad english i hope u understand me and thanks to all who give me answer.
lcanl said:
Hi guys, please help me with huawei id on this phone, i try everything i have found, but nothing of solutions didnt work. Sorry my bad english i hope u understand me and thanks to all who give me answer.
Click to expand...
Click to collapse
Whats your problem?
Lukke2804 said:
Whats your problem?
Click to expand...
Click to collapse
My problem is huawei id, i need to erase id.
clear data for hi APp, Huawei apps etc or just do factory reset all will go away
shashank1320 said:
clear data for hi APp, Huawei apps etc or just do factory reset all will go away
Click to expand...
Click to collapse
Factory reset is done but huawei id dont erase.
lcanl said:
Factory reset is done but huawei id dont erase.
Click to expand...
Click to collapse
Talking about app or app data for it..app wont go with factory reset and need to root and disable manually
shashank1320 said:
Talking about app or app data for it..app wont go with factory reset and need to root and disable manually
Click to expand...
Click to collapse
Sorry but client dont know about this, so he done factory reset without cleaning id and appdata, phone is on activation now.
Unable to Get Phone ID
I am unable to get my Honor 8 phone ID which I require to 'unlock' the bootloader as the phone will NOT start up into Android. It boots to the point where it asks for the Region, then Language, then WiFi, etc and then it goes back to the beginning, THUS Region, Language, WiFi, etc. but it never boots into Android as a result I am not able to check the Phone ID or to enable anything like USB debugging, etc.
What I have done to get to this point:
The phone updated > it seems like the update was unsuccessful as it got stuck in a loop where it would ONLY boot to the Huawei eRecovery.
Then I read a post to 'roll-back' to the earliest version (FRD-AL10...135) which I did and then from the SD Card installed the stock firmware (update.app) by using the Pwr+Volme UP+Volume Down buttons. It succeeded to install the stock firmware and ever since then I am stuck at the Region, Language, WiFi, Terms Agreement,etc - BUT it never gets past the selection - it just loops over and over.
I have again installed the stock firmware as above, but it fails to start and continuously gets stuck at the Region, Language, etc selections.
Could anyone please provide help if possible.
All the other posts I read, I need the 'bootloader' to be unlocked, BUT I am unable to get the Phone ID to get the UNLOCK code.
I have also read some posts which suggests I use 'adb' and 'fastboot' to 'recover' the phone to stock firmware, BUT I constantly get an error - "FAILED - Remote: Command not allowed".
So at this point I am not sure how to go any further.
PS: I have also had the phone to my local Huawei Service Centre, but they refuse to help me with the Honor 8 as I did not buy it in S-Africa.
Equalibrium_tdb said:
I am unable to get my Honor 8 phone ID which I require to 'unlock' the bootloader as the phone will NOT start up into Android. It boots to the point where it asks for the Region, then Language, then WiFi, etc and then it goes back to the beginning, THUS Region, Language, WiFi, etc. but it never boots into Android as a result I am not able to check the Phone ID or to enable anything like USB debugging, etc.
What I have done to get to this point:
The phone updated > it seems like the update was unsuccessful as it got stuck in a loop where it would ONLY boot to the Huawei eRecovery.
Then I read a post to 'roll-back' to the earliest version (FRD-AL10...135) which I did and then from the SD Card installed the stock firmware (update.app) by using the Pwr+Volme UP+Volume Down buttons. It succeeded to install the stock firmware and ever since then I am stuck at the Region, Language, WiFi, Terms Agreement,etc - BUT it never gets past the selection - it just loops over and over.
I have again installed the stock firmware as above, but it fails to start and continuously gets stuck at the Region, Language, etc selections.
Could anyone please provide help if possible.
All the other posts I read, I need the 'bootloader' to be unlocked, BUT I am unable to get the Phone ID to get the UNLOCK code.
I have also read some posts which suggests I use 'adb' and 'fastboot' to 'recover' the phone to stock firmware, BUT I constantly get an error - "FAILED - Remote: Command not allowed".
So at this point I am not sure how to go any further.
PS: I have also had the phone to my local Huawei Service Centre, but they refuse to help me with the Honor 8 as I did not buy it in S-Africa.
Click to expand...
Click to collapse
Dload the same firmware which you had before b135
shashank1320 said:
Dload the same firmware which you had before b135
Click to expand...
Click to collapse
It is impossible to determine which firmware the phone had before it broke as I imported the phone from China, and I did not have a reason to unlock the phone before it broke, hence the reason I did not have a need for the Product ID when the phone functioned properly, it is only after it broke that I had to have access to all this information in an attempt to get it back to a functioning state. That being said, the phone worked perfectly for a week until it did an OTA 'update', when the phone restarted I was presented with all kinds of trouble.
I have since been able to start the phone up in Android after I had to buy DC-Unlocker credits to get the phone to boot properly. UN-locking the phone via DC-Unlocker, unlocked the FRP and only thereafter I was able to unlock the bootloader and root the phone, and get access to USB debugging settings, etc.
Hi, This morning I tried flashing the Global Rom on CN version but it does not work. Even if the versions are the same, the recovery tells me "version number too low". In my case I tried the A09 CN and Global A09 but unfortunately no.
Now I wanted to unlock the bootloader but I just can't get into the bootloader mode. Neither by "adb reboot bootloader" or the usual key combination. Shortly before Find X2 Pro "supposedly" starts into bootloader mode, something is written in Chinese and fastboot but doesn't stay in fast mode.
Is the bootloader mode blocked in the CN version or do I have to do something else ?
Thank you
FordSierra88 said:
Hi, This morning I tried flashing the Global Rom on CN version but it does not work. Even if the versions are the same, the recovery tells me "version number too low". In my case I tried the A09 CN and Global A09 but unfortunately no.
Now I wanted to unlock the bootloader but I just can't get into the bootloader mode. Neither by "adb reboot bootloader" or the usual key combination. Shortly before Find X2 Pro "supposedly" starts into bootloader mode, something is written in Chinese and fastboot but doesn't stay in fast mode.
Is the bootloader mode blocked in the CN version or do I have to do something else ?
Thank you
Click to expand...
Click to collapse
From what I've researched only the Chinese variants can have their bootloaders unlocked. Before you're able to do that, you have to download an "in-depth testing" apk; however, the apk's are model specific (i.e. Find X, Reno Ace) but none has been released for the Find X2 (or X2 Pro) at the moment. I've been scouring the Chinese websites looking for the apk, but luck has yet to arrive.
edit 1:
Google translate says the Chinese characters say "Has entered Fastboot, press and hold power button for 6 ~ 10 seconds or reinstall battery to exit." Obviously a usual method to enter fastboot, but it still doesnt stay in fastboot mode.
FordSierra88 said:
Hi, This morning I tried flashing the Global Rom on CN version but it does not work. Even if the versions are the same, the recovery tells me "version number too low". In my case I tried the A09 CN and Global A09 but unfortunately no.
Now I wanted to unlock the bootloader but I just can't get into the bootloader mode. Neither by "adb reboot bootloader" or the usual key combination. Shortly before Find X2 Pro "supposedly" starts into bootloader mode, something is written in Chinese and fastboot but doesn't stay in fast mode.
Is the bootloader mode blocked in the CN version or do I have to do something else ?
Thank you
Click to expand...
Click to collapse
Hello, sorry not a reply to your question, where did you download the global rom ? I also have the CN version and I'd like to give it a try?
aldenr95 said:
Hello, sorry not a reply to your question, where did you download the global rom ? I also have the CN version and I'd like to give it a try?
Click to expand...
Click to collapse
Hi, sure I can give you the link.
Here => https://oppo-nz.custhelp.com/app/so...FVlpNZHRER3l0NyU3RTJYWUhCdmZ6QUw0YWclMjElMjE=
Sent from my PDEM30 using Tapatalk