Related
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
I_HAVE_NO_IDEA said:
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
Click to expand...
Click to collapse
Well if you can boot into the recovery and if its custom (TWRP) wipe all the data on your phone. Second I would try to flash a ROM onto your device such as Resurrection Remix and see if that works. Update on your progress.
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
I_HAVE_NO_IDEA said:
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
Click to expand...
Click to collapse
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
vtails said:
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
Click to expand...
Click to collapse
Thank you. But I can't flash a cm12.1 atm (see my post below). I can only flash through fastboot. I'm not sure I properly understood you, what do you call 4 22 ?
FYI I managed to boot again. Here's what I did:
Flash a 5.x ROM, try to boot to let the system make partitions and stuff (I think)
Boot in TWRP and saw that system and cache were not mountable, so I wiped them.
Flash a cm12.1 (+ Gapps) and here we go!
Thank you for your help!
I've installed TWRP 3.1.1-0 using fastboot but every time I try to flash a rom using it, I enter a bootloop ([1+] logo, the phone vibrate and reboot).
I've tried with AOSiP 6.3, AOSPlusOne 250817 and AOSPExtended 4.5. (With and without OpenGapps).
With the following procedure:
-Wipe Dalvik, Data, cache, system.
-Flash ROM
-Flash OpenGapps
-Wipe caches
-Reboot.
Am I doing something wrong ? Skipped a step ? Should I use another Rom/Recovery ?
EDIT: Solved ! Before flashing rom, you need to flash the latest official CM13 and then wipe /system before flashing anything else.
Wanted to say thanks. Your post helped me install a good rom again after unbricking my phone. Surprisingly I couldn't find this simple info elsewhere and also Cyanogenmod 13 is also hard to find cause the whole ROM landscape has changed! For instance Using a latest Lineage OS ROM didn't help either. I had to use TWRP from TugaPower and an outdated CM13 from a shady link to get it to work. Not sure which one did the trick but between one of them
Hatomike said:
I've installed TWRP 3.1.1-0 using fastboot but every time I try to flash a rom using it, I enter a bootloop ([1+] logo, the phone vibrate and reboot).
I've tried with AOSiP 6.3, AOSPlusOne 250817 and AOSPExtended 4.5. (With and without OpenGapps).
With the following procedure:
-Wipe Dalvik, Data, cache, system.
-Flash ROM
-Flash OpenGapps
-Wipe caches
-Reboot.
Am I doing something wrong ? Skipped a step ? Should I use another Rom/Recovery ?
EDIT: Solved ! Before flashing rom, you need to flash the latest official CM13 and then wipe /system before flashing anything else.
Click to expand...
Click to collapse
Glad I could help you, I didn't find anything else for this too.
From what I heard, it have something to do with some kind of drivers that are installed with OTA update. Since I disabled them I needed to install the latest official rom from Oneplus
Hatomike said:
I've installed TWRP 3.1.1-0 using fastboot but every time I try to flash a rom using it, I enter a bootloop ([1+] logo, the phone vibrate and reboot).
I've tried with AOSiP 6.3, AOSPlusOne 250817 and AOSPExtended 4.5. (With and without OpenGapps).
With the following procedure:
-Wipe Dalvik, Data, cache, system.
-Flash ROM
-Flash OpenGapps
-Wipe caches
-Reboot.
Am I doing something wrong ? Skipped a step ? Should I use another Rom/Recovery ?
EDIT: Solved ! Before flashing rom, you need to flash the latest official CM13 and then wipe /system before flashing anything else.
Click to expand...
Click to collapse
have to register just say THANK YOU!
saba.ahang said:
Wanted to say thanks. Your post helped me install a good rom again after unbricking my phone. Surprisingly I couldn't find this simple info elsewhere and also Cyanogenmod 13 is also hard to find cause the whole ROM landscape has changed! For instance Using a latest Lineage OS ROM didn't help either. I had to use TWRP from TugaPower and an outdated CM13 from a shady link to get it to work. Not sure which one did the trick but between one of them
Click to expand...
Click to collapse
gottdamm this may be my issue, I've tried a new battery without success, see my thread in this forum.
I'm using the latest TWRP and latest Lineage.
Could you, or anybody, post the links to the Tugapower TWRP and CM13 you used?
edit: I flashed CM13 but still boot looping, as per my other thread. Wondering what the hardware issue is.
So today, I came into this issue.
I've had flashed ROM on my device(s) for awhile, and today I have completely lost any hope and knowledge I had of my device.
I came across, TWRP saying no OS, then being unable to mount to system/ and mount data/
Now I have managed to flash a custom ROM on it, and flash the GAPPS but still, I get booting into TWRP Recovery.
Help?
Try wipe cache & dalvick in twrp then flash stock ROM, sometimes it work for me i hope this work for you too.give it try my friends
armuttaqin said:
Try wipe cache & dalvick in twrp then flash stock ROM, sometimes it work for me i hope this work for you too.give it try my friends
Click to expand...
Click to collapse
Can you link me to the stock ROM please.
imLiamMacdonald said:
Can you link me to the stock ROM please.
Click to expand...
Click to collapse
Try this and follow the instruction http://www.stechguide.com/download-stock-firmware-of-moto-g5/ DWYOR
New official rom
Hi,
Not sure it's the right place to post, tell me if not.
I received the notification for update yesterday and would like to install it. But I'm bootloader unlocked, rooted and with TWRP installed.
I've tried to install it "the normal way" anyway, but after downloading the update via OTA and rebooting, the phone reboots in TWRP and does not install the update through it...
Is there a way to install the update without loosing TWRP, root and data ?
S377 said:
Hi,
Not sure it's the right place to post, tell me if not.
I received the notification for update yesterday and would like to install it. But I'm bootloader unlocked, rooted and with TWRP installed.
I've tried to install it "the normal way" anyway, but after downloading the update via OTA and rebooting, the phone reboots in TWRP and does not install the update through it...
Is there a way to install the update without loosing TWRP, root and data ?
Click to expand...
Click to collapse
Not update OTA with twrp recovery
You're need:
Download full zip rom
Flash it by twrp recovery without wipe.
heobanhki said:
Not update OTA with twrp recovery
You're need:
Download full zip rom
Flash it by twrp recovery without wipe.
Click to expand...
Click to collapse
Ok, so I could just do the following steps ?
- Download the ROM by the MIUI updater (which stores the full zip in "downloaded_rom" folder")
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Optionally : Flash Magisk to retrieve root
- Reboot
Since my post, I've found this thread for Mi Mix 2 (not 2s) which talk about a LazyFlasher zip...
Isn't it needed ?
subboxcb said:
New official rom
Click to expand...
Click to collapse
Missprint in that update note? My Global 10.3.3.0 PDGMIXM got the security patch from May 1 :S
Update: Nvm, said May patch a line down...
Sent from my MIX 2S using XDA Labs
S377 said:
Ok, so I could just do the following steps ?
- Download the ROM by the MIUI updater (which stores the full zip in "downloaded_rom" folder")
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Optionally : Flash Magisk to retrieve root
- Reboot
Since my post, I've found this thread for Mi Mix 2 (not 2s) which talk about a LazyFlasher zip...
Isn't it needed ?
Click to expand...
Click to collapse
Someone can tell me please ?
S377 said:
Someone can tell me please ?
Click to expand...
Click to collapse
Don't upgrade!! There's no twrp for the new rom
I'll wait some days to see if a working twrp appears else I'm flashing 10.2.2 again (which is a PITA since it needs "flash_all" = reinstall everything)
xumixu said:
Don't upgrade!! There's no twrp for the new rom
I'll wait some days to see if a working twrp appears else I'm flashing 10.2.2 again (which is a PITA since it needs "flash_all" = reinstall everything)
Click to expand...
Click to collapse
Hi !
Please define "no twrp for the new rom"
I'm running V10.3.3.0 with official twrp (3.3.0) and can boot into twrp and install things from there.
(didn't test things like backup/restore though)
kr
flushbeer said:
Hi !
Please define "no twrp for the new rom"
I'm running V10.3.3.0 with official twrp (3.3.0) and can boot into twrp and install things from there.
(didn't test things like backup/restore though)
kr
Click to expand...
Click to collapse
Did you do any workaround for installation? I installed it as usual and it gets deleted at reboot (after flashing from 10.2.2 to 10.3.3).
xumixu said:
Did you do any workaround for installation? I installed it as usual and it gets deleted at reboot (after flashing from 10.2.2 to 10.3.3).
Click to expand...
Click to collapse
copy ROM to any other folder (e.g. from /sdcard/downloaded_rom to /sdcard), then ROM will not get deleted.
(or even better OTG if you have)
flushbeer said:
copy ROM to any other folder (e.g. from /sdcard/downloaded_rom to /sdcard), then ROM will not get deleted.
(or even better OTG if you have)
Click to expand...
Click to collapse
i mean twrp get deleted from the recovery partition on reboot
and i didnt used the "update" zip, but the full rom from miui download site
xumixu said:
i mean twrp get deleted from the recovery partition on reboot
and i didnt used the "update" zip, but the full rom from miui download site
Click to expand...
Click to collapse
oh, I misunderstood.
this behaviour I had with EVERY update. Just installed twrp again and everything working again.
Same here, but in this last update it gets reverted when I reboot, Whether I let it restart right after flashing twrp or if get into it after flashing. Is also noteworthy that it doesn't prompt me the "partition modification" message.
Is there any "settings" or cache for twrp that can be cleaned to have a "fresh" install? It remembers the time zone so I think it should save some things somewhere
Hm. weird. what I did was fastboot into TWRP and from there install as image from internal storage (or OTG).
(Might be, that I tried another version (v14? v15? from this forum) because I tested a few things because of my phone freezing problems. But I guess this should not make any difference.)
So no black magic here.
The only thing i know: I have it running.
Ok, thanks to both of you for your response.
I'll try to install it and will let you know for TWRP !
@xumixu : have you tried to "reboot to recovery" from TWRP once you've installed it and boot to it from adb ?
S377 said:
Ok, thanks to both of you for your response.
I'll try to install it and will let you know for TWRP !
@xumixu : have you tried to "reboot to recovery" from TWRP once you've installed it and boot to it from adb ?
Click to expand...
Click to collapse
No issues reboting into recovery after twrp installation. But once i get into system, recovery partition is factory restored to mi-recovery 3.0
All went good for me !
I've done the following steps :
- Download the full ROM (~1.9 GB) on the official MIUI website
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Wipe Dalvik/ART and Cache
- Flash Magisk to retrieve root
- Wipe Dalvik/ART and Cache
- Reboot TO RECOVERY !
- Reboot to system
I've done this going from MIUI v10.2.2.0 to v10.3.3.0 and using the official TWRP 3.2.3.0
S377 said:
All went good for me !
I've done the following steps :
- Download the full ROM (~1.9 GB) on the official MIUI website
- Reboot to TWRP
- Wipe Dalvik/ART and Cache
- Flash the downloaded zip
- Wipe Dalvik/ART and Cache
- Flash Magisk to retrieve root
- Wipe Dalvik/ART and Cache
- Reboot TO RECOVERY !
- Reboot to system
I've done this going from MIUI v10.2.2.0 to v10.3.3.0 and using the official TWRP 3.2.3.0
Click to expand...
Click to collapse
tried all those steps and I still end up bootlooped (with magisk 19 and 19.3).
ill back up important data, and make a clean 10.3.3 installation. If it doesnt work with 10.3.3, I'll rollback to 10.2.2
Seems that my rom "setup" was the culprit. Made a clean 10.3.3 install (fastboot mode flash_all.bat), reinstalled twrp, magisk and it booted ok (and twrp stayed togheter with encryption support).
No idea what happened in the update from my 10.2.2 to 10.3.3, but twrp works ok on 10.3.3 with a clean installation
Ok, weird... But good to know that all is ok now
Hi,
after pitchblack test I have softbriqued my poco.
I used miflash pro for reinstall and everything was good.
but, after unlock again my phone, flash the recovery, (everything was good at this time) flash my rom, the rom doesn't want to boot.
I tried many rom , change the twrp, nothing.
If anaybody have a solution for this issue, you're welcome.
Thanks a lot.
may be flash again with MIFLASH(clean all ) and go to the end of the configuration and check if everything is good .
https://xiaomiflashtool.com/
have you done...
format data in TWRP after flash TWRP and before install ROM again?
best TWRP for me...
recovery-TWRP-3.4.2B-0623-REDMI_K30PRO-CN-wzsx150
start twrp, only via fastboot with my rom version xiaomi.eu_multi_HMK30Pro_20.10.16_v12-11
Thanks for your response.
I've got a first issue with miflash, but the second time was good.
I don't know why it was impossible to connect with fastboot! That's the game of flashing..
I forgot one thing during my flashing session.. : after unlock my bootloader, and reflash a new rom, I didn't set pattern password...... It was the issue!
edit: after miflash session I could repare my phone to stock global. But after this I want to change my rom, and the twrp bootloop became.really strange.
This morning I use miflashtools another time and I keep this version of miui.
I don't know why it impossible to reinstall another rom after complete miflafh process!
Always and always back in recovery, each time!
Lethalben said:
I don't know why it impossible to reinstall another rom after complete miflafh process!
Always and always back in recovery, each time!
Click to expand...
Click to collapse
Can you describe precisely how you proceed to install the rom and which twrp are you using?
NOSS8 said:
Can you describe precisely how you proceed to install the rom and which twrp are you using?
Click to expand...
Click to collapse
Twrp used: all! China twrp 0328, and maunofrio
Install rom: format data, always, reboot to recovery, always, flash, succeed, done.
Wipe cache dalvik.
Reboot, and it became to twrp.
With my Poco, I flashed maybe 30 or 40 times for test some roms.
But since I tested pitch-black twrp everything gone wrong!
Lethalben said:
Twrp used: all! China twrp 0328, and maunofrio
Install rom: format data, always, reboot to recovery, always, flash, succeed, done.
Wipe cache dalvik.
Reboot, and it became to twrp.
With my Poco, I flashed maybe 30 or 40 times for test some roms.
But since I tested pitch-black twrp everything gone wrong!
Click to expand...
Click to collapse
Which rom do you want to install?
NOSS8 said:
Which rom do you want to install?
Click to expand...
Click to collapse
Mmx 12.0.8.0.
I've not tried xiaomi.eu, maybe I could do it.
Lethalben said:
Mmx 12.0.8.0.
I've not tried xiaomi.eu, maybe I could do it.
Click to expand...
Click to collapse
So you must flash miui V12.0.3.0.QJKMIXM with miflash. (no need to configure it just restart in fasboot and install trwp chinesse)
format data(if red lignes reboot twrp format again)->reboot twrp flash MMX rom, format data->reboot system
(do not use WIPE).
NOSS8 said:
So you must flash miui V12.0.3.0.QJKMIXM with miflash. (no need to configure it just restart in fasboot and install trwp chinesse)
format data(if red lignes reboot twrp format again)->reboot twrp flash MMX rom, format data->reboot system
(do not use WIPE).
Click to expand...
Click to collapse
That's what I did!
I'm on stock 12.0.3.0 now, with maunofrio twrp. I tested with chinese to.
I can root the rom, use magisk as well.
I did may be, 3 or 4 miflash for flash stock rom.,and always the same issue.
When I flash I haven't any issues with redlines, everything gone fine.
With stock its OK, with custom not.
Lethalben said:
That's what I did!
.
Click to expand...
Click to collapse
No you forget to format after install mmx rom and you wipe Wipe cache dalvik.
Dont use magisk.
NOSS8 said:
No you forget to format after install mmx rom and you wipe Wipe cache dalvik.
Dont use magisk.
Click to expand...
Click to collapse
I didn't do that ever! I format before flash, never after! And it worked.
Lethalben said:
I didn't do that ever! I format before flash, never after! And it worked.
Click to expand...
Click to collapse
But now it's not working so format data before and after.
NOSS8 said:
But now it's not working so format data before and after.
Click to expand...
Click to collapse
Thanks for your help mate!
It's just incredible and I don't understand why I need to format data after install now!
One month ago, wipe cache dalvik was enough to launch boot!
Big up!
https://forum.xda-developers.com/poco-f2-pro/how-to/pitchblack-recovery-project-oneos-t4189133