i was really really stupid and decided to try and install darky's resurrected rom on my new sgh-t959v. After doing it and it not going past the 'installing csc' prompt i decided to try and mount a different pit. i got a working setup out of luck, but now my sim card doesn't work. i got a new sim card and still no signal. i only managed to write down the baseband version before messing it up like this. now that i've read that mixing a pit file from one region with a csc file from another is dangerous. i just need the stock pit csc and phone files. it's been driving me nuts because i just got this phone and all of a sudden can't use it. i've learned my lesson but i really need to fix it. i don't think darky's will work on mine since it's so new.
btw i found the source for my phone,(can't put link here because i don't have over 8 posts) my model and version are listed there. the only problem is i'm a noob at developing(getting into it) and can't compile all this stuff. is there a guide to compiling it? i was hoping to compile the source from that site and try to port it. how would i go about making the source into the pit csc and modem files?
sorry for such a ****ty problems guys. hope someone can help thanks in advance.
super buuuuump!!!
bump, i want my foooone herpaderp!
what's the difference between pit files that are 512, 803, 513? what's this number represent?
so i just tried to flash some other 'custom' rom that was perfect for my phone. i tried it with a different pit file that i thought would work. but now the device doesn't respond to anything! i turned it off and it won't turn on at all now not even to download mode. i'm freaking out what do i do!!!
welp i didn't want to wait. just to update everyone i took it to a local tech who flashed it to stock but couldn't fix the fudged bootloader. i messed it up when it failed a rom flash and i pulled it out in the middle of flashing. so i'm sending it back and getting another one by tuesday
yes, i need it too.
Same problem, anyway know where download this firmware???
No Custom ROM
A word to the wise: The Samsung sgh-t959v for t-mobile does not allow you to put a custom ROM. If anyone knows how to, please advice. I have a new sgh-t959v and don't want to make the same mistake of bricking it where "adb reboot download" command didn't even work because the phone died.
I have jailbroken many an iphone and ipod, and I have recently bought the S6. I am keen to root but it seems far more potentially troublsome, and far less straightforward, or maybe its just because I am learning for the first time.
I bought this in New Zealand from Spark. I assume it is locked?
Is the bootloader locked?
I couldnt find the matching build on Chainfire, Can this particular model be rooted?
Is there any guide to rooting? It seems all the information is spread out all over the place and no definitive guide and FAQ.
I can't even find the original stock rom.
Is rooting not similar to jailbreaking in the way it is done?
My specs:
Model: SM-G920I
Android: 5.0.2
Build: LRX22G.G920IDVU1AOD1
Thank you in advance.
AAANNNDDDYYY said:
I have jailbroken many an iphone and ipod, and I have recently bought the S6. I am keen to root but it seems far more potentially troublsome, and far less straightforward, or maybe its just because I am learning for the first time.
I bought this in New Zealand from Spark. I assume it is locked?
Is the bootloader locked?
I couldnt find the matching build on Chainfire, Can this particular model be rooted?
Is there any guide to rooting? It seems all the information is spread out all over the place and no definitive guide and FAQ.
I can't even find the original stock rom.
Is rooting not similar to jailbreaking in the way it is done?
My specs:
Model: SM-G920I
Android: 5.0.2
Build: LRX22G.G920IDVU1AOD1
Thank you in advance.
Click to expand...
Click to collapse
I have the SM-G920I and it's rooted.
Rooting the G920I is apparently not as straightforward as others but still possible.
I had to flash TWRP via Odin, then flash the [BETA][2015.04.28] SuperSU v2.49 package via recovery.
Details when I get back from work, or some kind soul decides to help.
There is a stock image thread and a few stock roms floating around. Request / search lower down in that thread
Thanks, is it better to reset the s6 before rooting? For a clean root?
And about all the warnings about 'you do this at your own risk blah blah'. If you do everything properly how could you actually hard brick the device? If you do it properly the worst that should happen is a soft brick, in which case you just restore the phone and try again right?
AAANNNDDDYYY said:
Thanks, is it better to reset the s6 before rooting? For a clean root?
And about all the warnings about 'you do this at your own risk blah blah'. If you do everything properly how could you actually hard brick the device? If you do it properly the worst that should happen is a soft brick, in which case you just restore the phone and try again right?
Click to expand...
Click to collapse
Here is my experience, a fellow kiwi on Spark (with a 2D branded phone). I too have the 920I running on A0D1 via OTA.
It is unlikely Spark firmwares have locked bootloaders.
So long as you can get to download mode (holding volume down, home and the power button for up to 10 seconds), you can bring your phone back to life if something goes wrong . You will want a copy of Spark's firmware handy before you start, you can get it from here . Just in case.
Use the USB cable that come with your phone and make sure you have the drivers installed.
Any ways, first I flashed TWRP via Odin (through download mode Andy), flash was successful, however booting into recovery hung my phone. Managed to get back to download mode from there and flashed CF-Root for 920I. Boot loop.
Back to download mode and flashed CF-Root for 920F. Success, rooted and booted. Andy, if all you are looking for is root, avoiding the TWRP flash may work and going straight to CF-Root. Others have had issues with this, I'm not sure. I'd try the 920I first and if no good try the 920F. Again, as long as you can get to download mode, you can flash Sparks firmware through Odin to restore it to stock. Good luck and remember, attempting any of this WILL trip KNOX. If your using this as a company phone, you will run into issues. Can't imagine we will see Samsung pay any time soon in NZ.
For those interested in TWRP, after the root was obtained, my recovery was still busted. I flashed the TWRP image via Flashify and now I have also have TWRP. Good times.
Thanks mate, it all seems quite confusing, makes me want to go back to Iphone hahaha. I am not a dev, I just like the freedom to be able to do whatever I damn well please on my phone that I paid for.
This tutorial the way to go?
youtube.com/watch?v=BW5P8zqkFpY
AAANNNDDDYYY said:
Thanks mate, it all seems quite confusing, makes me want to go back to Iphone hahaha. I am not a dev, I just like the freedom to be able to do whatever I damn well please on my phone that I paid for.
This tutorial the way to go?
youtube.com/watch?v=BW5P8zqkFpY
Click to expand...
Click to collapse
What the chap did in that video was exactly what my original plan was to root and install TWRP. Where I got stuck is the TWRP recovery hung so I couldn't flash SuperSU. Good run down of the basics of flashing with Odin though.
What I did after the recovery got stuck was return to download mode and flash CF-Root again through Odin (same process as in the video). The one for the 920I didn't actually work (boot loop), the 920F CF-Root worked fine though. Probably has something to do with these CF-Roots having been build on a older firmware as you noted in your OP. Then, once you have root, you can flash a custom recovery (such as TWRP) through Flashify (available on Play Store).
It certainly can be confusing with all the trial and error reported in these forums, this is largely because the devices are new. The Devs' will iron out the bugs in due course making the process much simpler. You could wait a few weeks and check back, or grab yourself a stock Spark firmware and have a crack. Flashing this trough Odin will return you to stock provided you can get your phone to download mode. No responsibility from my end.
Another thing, you will lose OTA updates. You will find newer firmwares here as they get released, to update its as simple as flashing them through Odin.
Yes the G920I listed on Chainfires site is for the AOC6 build, but I am on the AOD1 build.
Another thing, should i factory reset before rooting?
AAANNNDDDYYY said:
Yes the G920I listed on Chainfires site is for the AOC6 build, but I am on the AOD1 build.
Another thing, should i factory reset before rooting?
Click to expand...
Click to collapse
Nah, don't bother. The process will retain all your settings and data too.
So just confirm that i can root my g920I with build AOD1 with this meathod?
---------- Post added at 05:45 PM ---------- Previous post was at 05:33 PM ----------
d0ce said:
What the chap did in that video was exactly what my original plan was to root and install TWRP. Where I got stuck is the TWRP recovery hung so I couldn't flash SuperSU. Good run down of the basics of flashing with Odin though.
What I did after the recovery got stuck was return to download mode and flash CF-Root again through Odin (same process as in the video). The one for the 920I didn't actually work (boot loop), the 920F CF-Root worked fine though. Probably has something to do with these CF-Roots having been build on a older firmware as you noted in your OP. Then, once you have root, you can flash a custom recovery (such as TWRP) through Flashify (available on Play Store).
It certainly can be confusing with all the trial and error reported in these forums, this is largely because the devices are new. The Devs' will iron out the bugs in due course making the process much simpler. You could wait a few weeks and check back, or grab yourself a stock Spark firmware and have a crack. Flashing this trough Odin will return you to stock provided you can get your phone to download mode. No responsibility from my end.
Another thing, you will lose OTA updates. You will find newer firmwares here as they get released, to update its as simple as flashing them through Odin.
Click to expand...
Click to collapse
So just confirm that i can root my g920I with build AOD1 with this meathod?
d0ce said:
What the chap did in that video was exactly what my original plan was to root and install TWRP. Where I got stuck is the TWRP recovery hung so I couldn't flash SuperSU. Good run down of the basics of flashing with Odin though.
What I did after the recovery got stuck was return to download mode and flash CF-Root again through Odin (same process as in the video). The one for the 920I didn't actually work (boot loop), the 920F CF-Root worked fine though. Probably has something to do with these CF-Roots having been build on a older firmware as you noted in your OP. Then, once you have root, you can flash a custom recovery (such as TWRP) through Flashify (available on Play Store).
It certainly can be confusing with all the trial and error reported in these forums, this is largely because the devices are new. The Devs' will iron out the bugs in due course making the process much simpler. You could wait a few weeks and check back, or grab yourself a stock Spark firmware and have a crack. Flashing this trough Odin will return you to stock provided you can get your phone to download mode. No responsibility from my end.
Another thing, you will lose OTA updates. You will find newer firmwares here as they get released, to update its as simple as flashing them through Odin.
Click to expand...
Click to collapse
So were you able to install TWRP?
CF Root works for me with 920I version, but flashing TWRP forces it not to boot past the Samsung Logo.
Likewise with flashing a custom kernel also forces it not to boot past the Samsung Logo
Im on the C4 Australia build.. thinking about trying to flash a later 920I build to see if it'll help
s3ct0r said:
So were you able to install TWRP?
CF Root works for me with 920I version, but flashing TWRP forces it not to boot past the Samsung Logo.
Likewise with flashing a custom kernel also forces it not to boot past the Samsung Logo
Im on the C4 Australia build.. thinking about trying to flash a later 920I build to see if it'll help
Click to expand...
Click to collapse
Did someone figure this out? I have the Sm-920i and I get stuck at the Samsung splash screen after flashing twrp! So I have to Odin the cf-auto-root... I've tried flashify also... It won't work... Stuck @ Galaxy S6 screen what gives is it the SM-920I OR ME? I have had many Galaxy phones in the past but this one is pissing me off
Kjc99 said:
Did someone figure this out? I have the Sm-920i and I get stuck at the Samsung splash screen after flashing twrp! So I have to Odin the cf-auto-root... I've tried flashify also... It won't work... Stuck @ Galaxy S6 screen what gives is it the SM-920I OR ME? I have had many Galaxy phones in the past but this one is pissing me off
Click to expand...
Click to collapse
Yeah flash the New Zealand 1D firmware and TWRP will work perfectly. But note that to get root, you will have to use cf-auto-root for the 920G Model
Best of luck
s3ct0r said:
Yeah flash the New Zealand 1D firmware and TWRP will work perfectly. But note that to get root, you will have to use cf-auto-root for the 920G Model
Best of luck
Click to expand...
Click to collapse
How come it has to be the New Zealand? I'm trying to backup my carriers crappy baked rom just in case I need to return... Is there anyway to back it up without a custom recovery but rooted? Because if I flash the new Zealand before making a backup and have to return they will see I have messed with the phone because they put a boot animation
Kjc99 said:
How come it has to be the New Zealand? I'm trying to backup my carriers crappy baked rom just in case I need to return... Is there anyway to back it up without a custom recovery but rooted? Because if I flash the new Zealand before making a backup and have to return they will see I have messed with the phone because they put a boot animation
Click to expand...
Click to collapse
Doesn't have to be the New Zealand one, I just used it since I'm in Australia. Any 920I firmware should work just make sure it's at least 1D. I only tried those firmwares, and always had success
My carrier is GCI wireless in Alaska, USA... No way to download there firmware...also is twrp it? No more cwm or philz recovery?
Sorry forgot to add current firmware pic
s3ct0r said:
Doesn't have to be the New Zealand one, I just used it since I'm in Australia. Any 920I firmware should work just make sure it's at least 1D. I only tried those firmwares, and always had success
Click to expand...
Click to collapse
Cool thanks for the info!
Update thank you @s3ct0r...worked on the 1st try.... Now I'm working on the deep sleep issue...
Kjc99 said:
Update thank you @s3ct0r...worked on the 1st try.... Now I'm working on the deep sleep issue...
Click to expand...
Click to collapse
Flash the ktoonsez Kernel, or the flashable zip from the Cf-AutoRoot topic
s3ct0r said:
Flash the ktoonsez Kernel, or the flashable zip from the Cf-AutoRoot topic
Click to expand...
Click to collapse
Is ktoonsez a stable kernel, I remember using it on my S4 but skipped it last year on my S5 because it had to many tweaks... Can I use it with a stock rom? Alliance?
Hey first time posting on xda devs and would like to know how to unlock bootloader, root the phone, and install custom ROM.
Now I have spent entire day backing up and searching the different people root but if someone can help me and point me in the right direction that would be great.
So I have a S3 from ATT Model: SGH-I747, Version: 4.1.2 JellyBean, BaseBand Version: I747UCDMG2, Kernel: 3.0.31 - 1300972. It is a stock ROM, I have never done anything to the phone at all before.
Now I will admit I followed a youtube video call "How to Root AT&T Galaxy S3 SGH-I747!" by High on Android and I did everything in the video. I used odin v1.85, I did the PDA to the CWM.tar file, phone rebooted and I added the CWM superuser file and that is when I tried to get to CWM recovery mode and all I got was the phone's default recovery mode and not the CWM one.
From what I understand I believe I need to unlock bootloader first, but again this is a my first doing this and I hoping someone can point me in the right direction. Forum post state that you should follow guides that is exactly the same to the phone you would like to install custom ROMs.
Honestly I would like to ultimately be able to install a recovery mode that works with my phone that I am able to create snapshot image of my stock phone in case anything happens or I would like to go back to my stock image (which I highly doubt if everything goes fine) and install a custom ROM (I know there are different ROMs if someone can point me to where I can check out all the custom ROMs and not necessarily install those custom ROMs that would be awesome) and finally get rid of ATT loading screen when booting up the phone and install a custom boot loading screen, but of course I care more about getting the custom ROM install first.
If anyone can help that would be great.
Hi
Please use the below link to register a XDA Account first, prior to start posting and replying onto our forums.
Join the Experts
When you complete your registration, I would invite you to post your request in the below forum as our team mates there should be able to help you:
AT&T Galaxy S III Q&A, Help & Troubleshooting
Best regards and good luck.
.
XDA Visitor said:
Hey first time posting on xda devs and would like to know how to unlock bootloader, root the phone, and install custom ROM.
Now I have spent entire day backing up and searching the different people root but if someone can help me and point me in the right direction that would be great.
So I have a S3 from ATT Model: SGH-I747, Version: 4.1.2 JellyBean, BaseBand Version: I747UCDMG2, Kernel: 3.0.31 - 1300972. It is a stock ROM, I have never done anything to the phone at all before.
Now I will admit I followed a youtube video call "How to Root AT&T Galaxy S3 SGH-I747!" by High on Android and I did everything in the video. I used odin v1.85, I did the PDA to the CWM.tar file, phone rebooted and I added the CWM superuser file and that is when I tried to get to CWM recovery mode and all I got was the phone's default recovery mode and not the CWM one.
From what I understand I believe I need to unlock bootloader first, but again this is a my first doing this and I hoping someone can point me in the right direction. Forum post state that you should follow guides that is exactly the same to the phone you would like to install custom ROMs.
Honestly I would like to ultimately be able to install a recovery mode that works with my phone that I am able to create snapshot image of my stock phone in case anything happens or I would like to go back to my stock image (which I highly doubt if everything goes fine) and install a custom ROM (I know there are different ROMs if someone can point me to where I can check out all the custom ROMs and not necessarily install those custom ROMs that would be awesome) and finally get rid of ATT loading screen when booting up the phone and install a custom boot loading screen, but of course I care more about getting the custom ROM install first.
If anyone can help that would be great.
Click to expand...
Click to collapse
Hi,
iam glad this place still exits
I've got a S6 (SM-G920F), more or less a testing-device (poor Batterie^^) . It was on Android 7 Stock, may not updated for 6month+, not 100% sure . Was my first mistake, i don't know any more details...
First i tried a few old stock from sammobile (Android 5.1.1 etc.) and tried to flash with odin. As you may guess it didnt work. I thought "Stocks - should be easy " and there are many outdated guides who tell this. I searched for the error messages (onscreen) and found hints that this problems could be caused by Bootloader who deny downgrading, may also for good reasons. I didnt read any deeper, as i found this Guide here: https://forum.xda-developers.com/galaxy-s6/help/guide-downgrade-sm-g920f-nougat-to-t3639253
Followed this Guide with https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU2COH2/54694/ as "Source". I worked with the engineering bootloader and the told parts from the Stock. RecoveryMode was broken, but systems seems boot fine and no obvious Errors or Problems. A good guide for that goal, but no guide can teach me whats going up in detail. I want to understand a little bit more, and not searching for a "from any to ANY guide"
Actually iam trying to get on 6.0.1 Stock, but this guide doesnt work for me with a few stock-roms, not booting.
Flashing complete stocks with odin still fails. Flashing dont start or fail at hidden.img.
I came to this page with my first xda, later flashed a lot with my Galaxys...S2-S4, also custom roms- but stayed on stock at some point. So i should have basic knowledge, but i realize its outdated and there a few new "stummbling blocks" etc. Therefore i decided to get more in detail and ask here, before trial and error with other ways (like flashing with recovery)may leads to a brick. Not founded deeper informations myself. In the past i knew which parts a rom/firmware could have and their functions and whats possible with it.
Somebody here with time to help? Where can i find infos which bootloader i got, which others i may can flash (on what way) and which one is working with which Rom^^ Hope that the device wasnt on newest BL, and i still have the choice. Is the Kernel or other parts important as long as iam only trying to jump between stocks?
I backuped efs-partition with TWRP and stored the backup folder on PC, is that enogh to be prevent IMEI lost?
Hints or Links could be enough in some cases.
Thanks for reading and your work
Mattezh said:
Hints or Links could be enough in some cases.
Thanks for reading and your work
Click to expand...
Click to collapse
G920f is international version, so compatible with all roms. Frankly speaking, flashing is basically same as s2 etc. If you're on nougat, then nougat bootloader.
Idk why u want to go to Marshmallow, but some guys managed to flash a Marshmallow custom rom directly from nougat. It's called xtrestolite. It has no support whatsoever. https://forum.xda-developers.com/ga...xtrestolite-deodexed-mod-edition-1-0-t3094423
For TWRP & ROOT, follow the steps in this video https://youtu.be/BV1ELmu8T0I & that's it.
DO NOT USE supersu. USE & flash latest Magisk v15.0+ (stable) from here https://forum.xda-developers.com/app...80cb6-t3618589 Download latest Magisk Manager as well
So the steps are:
From the links in the video, download the specific twrp for g920f. This one: https://eu.dl.twrp.me/zeroflte/twrp-...roflte.img.tar The first file.
Install the Samsung drivers from the link in the video on your pc.
Download & extract Odin.exe.(link in video. Use the same version)
Enable usb debugging on your phone.
Put your phone to download mode
Start odin. Follow the steps in the video to install twrp
When install is complete, immediately reboot to twrp to flash latest Magisk. Wipe Dalvik.
Reboot. Install latest Magisk Manager
Check status in the Magisk Manager.
Done.
If not rooted, flash magisk.zip again in twrp
SuperSu gave problems to some users. Magisk was successfully installed in the first shot!
Nougat roms I'd suggest to flash. They're in S6 unified forum:
MiPa rom, A8 2016 v2, OdexLite v4.1
Try the Nougat roms I've mentioned since you're already on Nougat.
BTW Don't flash any kernels. Stay with those which came with the roms
Good day everyone, just got my note pro WiFi version? Already rooted and has custom kernel civz, tablet feels slow so I'm planning on changing rom maybe lineageOS but I'm concerned about the procedure because I'm not sure where I'm standing with every change done to this device, any help is appreciated I just don't want to brick this device trying to flash a new rom.
Currently it's running stock rom 5.0.2, 3.4.39 civz kernel and knox 2.3, if someone could provide a step by step on what should I do or check in this device to be on the safe road id really appreciate it. Btw I don't even know what recovery I have or how do I access it.
Bump
honestly most samsung devices are the same so id suggest getting the full stock system and using odin to revert to stock, from there start by getting a custom recovery and seeing what else you need to set up your rom
someone correct me if im wrong
heres the page for official stock "images"
https://www.sammobile.com/firmwares/galaxy-note-pro/SM-P900/
xxjahasotoxx said:
honestly most samsung devices are the same so id suggest getting the full stock system and using odin to revert to stock, from there start by getting a custom recovery and seeing what else you need to set up your rom
someone correct me if im wrong
heres the page for official stock "images"
https://www.sammobile.com/firmwares/galaxy-note-pro/SM-P900/
Click to expand...
Click to collapse
someone told me that I just need to install twrp as it is and start flashing roms, dont know if this the best way to do it what do you think?
It could work just keep in mind that you don't know exactly what the previous owner did to it so if they installed a custom kernel you'll be stuck with that, could be a good thing could be a bad thing
You could always give it a shot and if it gives you problems go back to stock then TWRP then start rom-ing