Honor 8 FRD-L19C432 recovery and boot problem - Honor 8 Questions & Answers

Hello,
Sorry for my english, someone can help me?
I have Honor 8, and can't boot.
I want to install oreo B562 (emui8) with HuRUpdater, but the ˝data˝ folder was in emmc format, I tried to wipe and format in ext4 extension.
But it was some problems, because after twrp reboot the phone did'nt want to boot.
I tried to rollbeck to B412 (emui5) also with hurupdater, same result, the phone allways rebooted in loop.
After this I want to use unbrick option from multi tool. In multi-tool program show my phone is still on oreo, but the recovery files not able to reinstall, as tough a files structure are modificated in emui5.
Now my phone is bricked, I can't flash in stock recovery mode also not in twrp and can't shutdown.
How I can flash recovery image to reboot in erecovery or somthing else to reinstall my phone?
Someone please help meeee!

Related

Mate 8 stuck at boot screen ...not quite a brick, help please NXT-L09 EMUI 4.0

Hi There, need some help if you can...any educated and experienced help would be appreciated thanks.
After downloading my stock firmware and extracting via Huawei update Extractor all the image files ( System, user data, Cache, etc) I backed up oeminfo and cust files via Rayglobe Knife and saving the extracted update.app file to my dload folder on SDCard and successfully resetting my phone to factory using the vol+/- and power method I was quietly confident to make the jump and flash a rom the Android 7.0 (N) Nougat beta on Huawei posted by Somboons
I followed the instructions and dirty flashed this thru TWRP as instructed which seemed to go ok until I tried to reboot, the phone booted to stock recovery so I wiped Dalvik, Cache and Factroy reset, this completed and it all went down hill from there, basically now just stuck at boot screen saying that its about to reboot but never moves unless I use button combos
(OK so yes I feel stupid now and I'll beat myself up so you don"t have to, but I reallyt thought that I could always get back to stock via my SDCard)
What I can do...
Phone can only boot to eRecovery ( with WIFI failed message )
I can go into fastboot ( shows Bootloader and FRP unlocked)
What i can't do...
Cant access my update file on SDCard....Trying to boot using vol+/- and power to access my dload/update.app file on my SDCard just freezes at initial boot screen and tells me to push vol up button for 3 second and this takes me to eRecovery where all i can do is reboot or shut down.
I can't adb sideload files " no SU Binary detected"
What I've tried...
I have tried Rayglobe knife UNBRICK option placing my extracted boot, cust, system, recovery .img files but his fails with my PC popping up and saying this operation can't be performed on this PC please contact developer so this fails.
I then tried to fastboot flash all the image files which seemed to work successfully but no changes to the situation.
I have tried to fastboot flash the update.app which went thru the sparse process of all seven files and then come up with error command can not complete ( something in those words)
I have tried to fastboot new stock recovery from my rom as well as TWRP recovery but nothing works even if it says seems to have completed in the adb command prompt.
I have a feeling this is to do with the encryption of the rom and now my system cannot recognise my partition and without recovery I have no way of mounting my sdcard.
Thank god I have my old and reliable Lumia 1520 to fall back on untill I get this sorted.
Any Help would be appreciated....thanks in advance
Are you able to boot into Huawei recovery?
Mickie.C said:
Hi There, need some help if you can...any educated and experienced help would be appreciated thanks.
After downloading my stock firmware and extracting via Huawei update Extractor all the image files ( System, user data, Cache, etc) I backed up oeminfo and cust files via Rayglobe Knife and saving the extracted update.app file to my dload folder on SDCard and successfully resetting my phone to factory using the vol+/- and power method I was quietly confident to make the jump and flash a rom the Android 7.0 (N) Nougat beta on Huawei posted by Somboons
I followed the instructions and dirty flashed this thru TWRP as instructed which seemed to go ok until I tried to reboot, the phone booted to stock recovery so I wiped Dalvik, Cache and Factroy reset, this completed and it all went down hill from there, basically now just stuck at boot screen saying that its about to reboot but never moves unless I use button combos
(OK so yes I feel stupid now and I'll beat myself up so you don"t have to, but I reallyt thought that I could always get back to stock via my SDCard)
What I can do...
Phone can only boot to eRecovery ( with WIFI failed message )
I can go into fastboot ( shows Bootloader and FRP unlocked)
What i can't do...
Cant access my update file on SDCard....Trying to boot using vol+/- and power to access my dload/update.app file on my SDCard just freezes at initial boot screen and tells me to push vol up button for 3 second and this takes me to eRecovery where all i can do is reboot or shut down.
I can't adb sideload files " no SU Binary detected"
What I've tried...
I have tried Rayglobe knife UNBRICK option placing my extracted boot, cust, system, recovery .img files but his fails with my PC popping up and saying this operation can't be performed on this PC please contact developer so this fails.
I then tried to fastboot flash all the image files which seemed to work successfully but no changes to the situation.
I have tried to fastboot flash the update.app which went thru the sparse process of all seven files and then come up with error command can not complete ( something in those words)
I have tried to fastboot new stock recovery from my rom as well as TWRP recovery but nothing works even if it says seems to have completed in the adb command prompt.
I have a feeling this is to do with the encryption of the rom and now my system cannot recognise my partition and without recovery I have no way of mounting my sdcard.
Thank god I have my old and reliable Lumia 1520 to fall back on untill I get this sorted.
Any Help would be appreciated....thanks in advance
Click to expand...
Click to collapse
I have solved so
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
warsangel said:
I have solved so
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
A very big thanks ....this worked with no hitches except I now have no service now have to find unlock code for sim and get rid of the Ascend 7 splash screen that appears before the original Huawei Boot screen.?
After the above issues with thanks to warsangel's suggestion to use DC_Phoenix, I have managed to get my phone back up and running...got sim working so I now can detect my network and call and text using HCU client.
I now want to get rid of the annoying splash screen on bootup that shows Huawei Ascend spalsh screen before the mate 8 factory Huawei animated boot up screen. I still cannot access my dload folder on SDCard using vol-/+ and power button combo and if I dial in to manufacturers settings using*#*#2846579#*#* when i select upgrade from sd card i get a "PT failed do you still want to continue" if i click yes it re installs the firmware but makes no changes at all. Does any one have any other ideas. Of how to clear the splash screen and get the phone working back on Mate 8 button and bootup settings. Everything else works perfectly just a couple of things that will niggle at me...just want to get it back to out of the box as I have the Original Firmware zip file for this phone and region. cheers
bluheart said:
Are you able to boot into Huawei recovery?
Click to expand...
Click to collapse
Hi blueheart...no I can't, I think this is my problem, I can get to fast boot and I can't fastboot anything now because the boot loader is locked with a different code than the original one that I paid for with dc-unlocker. I have manged thru HCU cLIENT to get my original imei number and serial number but this serial number doesnt show up when I fastboot devices, lists one that come with the Phoenix firmware I flashed which is an Ascend as this was a NXT image closest to my NXT-L09.
My problem still is that I seem to go in to 2G and lose the signal all the time, I'm thinking I need to enter more details in CDMA repair in HCU Client or am I going about this the wrong way???
Oh bru, no idea!
HCU client is good enough. Keep trying dload if your bootloader is locked, it will flash for sure. Phone isn't easy to brick.
bluheart said:
Oh bru, no idea!
HCU client is good enough. Keep trying dload if your bootloader is locked, it will flash for sure. Phone isn't easy to brick.
Click to expand...
Click to collapse
Cheers Mate, managed to get to dload/update now but this doesnt seem to give a full reset, but modem is holding a signal but intermittently will drop into no service. I managed via HCU to re enter my imei and serial but a different serial number showsup in my settings still ??? getting back to where i need to but the signal dropping is a real problem. The next step is to try and get bootloader unlocked....any advice from any one.... if I fastboot flash modem will this be enough to bring my base band back or is there another file I should be looking at? cheers
You need to have cust and oem info of your own area for best signal
bluheart said:
You need to have cust and oem info of your own area for best signal
Click to expand...
Click to collapse
Thanks....I have my backup oeminfo it isnt a .img or .app file it just says oeminfo (type=file) can i fast boot this ? or do I have to use SRKtool as I don't want to unlock bootloader.
DC-Phoenix tool lets me fastboot .img files via backdoor and app files can I convert the oeminfo file to and .img file?
Cheers
How did you do the back up?
You can flash via fastboot
bluheart said:
How did you do the back up?
You can flash via fastboot
Click to expand...
Click to collapse
Backup was done through Rom Manager but the back up isn't an image it's a series of files like system.ext4, boot.emmc.win etc with MD5 info files. I've re-rooted device and tried to use rom manager to restore but when it boots to TWRP recovery nothing happens??? and I can't see any of the files if I go into the twrp folder on the SDcard because they aren't zip or img file.
My biggest problem even after doing full factory reset, wipe cache or install my original firmware update.app file, it doesn't seem to over write the image file that I used to recover my phone with the DC-Phoenix app, every thing indicates that it has been successful, but when I boot up,, It never goes to the stock setup mode where you would normally, choose your region, set your pin etc....it's like my install is only a shell or part of my install is not overwriting the dgtks firmware file I used which was a Huawei Ascend 7. The system re-defaults after rest to this firmware. Anyone help me to get rid of it and get back to my stock please?
I can use my stock update.app but it's not installing over the NXT AL10_M00A095_Factory_firmware_Android_6.0_EMUI_4.0.dgtks that I use ( this was the closest firmware that they had ) I think I need to format my whole system to ext4 ??? especially the partition that it storing this data that is preventing me to get my stock firmware back....any help or advice on this ...thanks
Yes format via Huawei recovery then flash
Or
Root and flash via TWRP after unzipping
bluheart said:
Yes format via Huawei recovery then flash
Or
Root and flash via TWRP after unzipping
Click to expand...
Click to collapse
just to update....I tried formatting and resetting all partitions to ext4 format most of the partitioning was successful with the exception of Systrem and Cust...TWRP would allow me to do these....I did numerous wipes via TWRP and Stock RECOVERY but unfortunately even with a full update.app via sdcard / dload folder and fastboot update.app (my firmware) via DC-Phoenix I couldn't seem to get a full factory stock install, same problems as discussed above and file system always goes to Encrypting screen and then I end up with the Ascend 7 screen and settings with obviously the wrong base band for my region. So I hate to admit defeat, but I've relocked bootloader, reset as much as I can and sent off to the Huawei Workshop to see if they can reset all the partitons back to normal.
Hahaha
Cool, let's see
bluheart said:
Hahaha
Cool, let's see
Click to expand...
Click to collapse
Update: well I dodged a bullet today....I sent my Mate 8 away 5 days ago to the Huawei tech support up the other end of the country and it arrived back today, back to stock and they replaced the main board with no cost to me at all. I was sure that they would call foul play and charge me but I obviously did such a number on the phone and then cleaned up all traces that they couldn't make that call lesson learn't and I see a few other people having similar problems with the Beta Nougat Rom....that you may need to post a big warning and send them to this posting so they are fair warned. I think this thread is done....I might just leave my phone alone and no tweaking for a while
Absolutely true!
XDA is not a playground for kids
You need courage to keep the Mate's balls on fire and get burnt with the nuclear reactions while keeping the blame on self

Soft bricked MHA-L29C432; please help!!!!

Hi guys i was trying to install a custom rom on my mate 9 (MHA-L29C432-156)so i followed the instructions ; unlocked the bootloader; then installed twrp 3.1.0-0; on twrp formated data; then full wiped and try to install AurRom from SD; but get a message that zip file is corrupted; so I tried with S.H.I.E.L.D ROM and it flashed , but then when boot goes to eRecovery, and give me 3 options download latest version and recovery; reboot and shutdown. So now I cant boot the phone, when I restarted, followed same steps , format data, full wipe and trying to installing again but getting a message about all zip files of the roms are corrupted; then i try to restore backup; and same again get the huawei logo, then the android logo , phone restarts and eRecovery again.
Please someone HELP, I use this phone for my work...........!!!!!!!!!
How did you full wipe?
Also try with Twrp 3.0.2-2
Here:www.androidfilehost.com/?fid=745425885120697579
dannytgt said:
on twrp formated data
Click to expand...
Click to collapse
Something went wrong here. You can run 'adb logcat' to see the crash details while starting.
If you have a backup on twrp then restore to get phone working. You may need to flash the public and hw-data zips afterwards though.
If you don't have a backup then you could try flashing the C636 off line firmware and then use firmware finder to go back to your original firmware
Sent from my MHA-L09 using XDA-Developers Legacy app
you may just flash the modified recovery ( See Guide subforum ) ) to bypass the update certification and authorization and reflash an original firmware. your stored files will be lost anyway in most cases.
I would bet superuser ( shield ) and SuperSU ( Aurom) messed your boot image. Both are incompatible to each other and, afaik both are incompatible to twrp 3.1.
Flash TWRP 3.0.2.2, reboot to recovery again to change version, flash the rom ( f.e. shield rom), boot once up, reboot to recovery and THEN you may flash twrp 3.1
Thanks all of you guys, I've solved the problem, it seems that's something related to the sd card, I've formated the sd and transfer the files trough another phone and then put the sd on the mate 9, I follow the steps as followed before and works successfully, now I'm on AurRom and 182 firmware.

Bricked honor 8 please help

Hello, today while trying to get back to stock i wierdly bircked my honor 8
I flashed the stock recovery and stock boot img
Then i flashed a rollback package and a marshmallow package which i used for this same thing before.
Now the phone didnt start for a solid 30 minutes and ive decided to reflash the rollback and marshmallow package, but after i flashed the rollback got stuck at the boot logo, not even the stock bootanimation showing up.
The phone doesnt reboot neither in any of the recoveries nor in bootloader.
Any help would be appreciated.
Stephen
Okay so after all of this i managed to reboot to bootloader and get my hands on one of my previous unlock codes. So now ive got an unlocked bootoader, but after fashing twrp the phone is stuck at the 'your device is booting now' when im trying to get in it
I thing you have flashed the wrong TWRP, check for the latest version or at least the one for your build
uh well, hello there again.
i've tried to do the dload method which failed(i used lots of versions tho none worked)
and i've tried flashing marshmallow twrp, which at the moment, well, it cannot mount anything. no partition can get mounted.
Does any of you guys have an idea of what i could try?
thanks in advance
Does it mean that you have access to TWRP ? if TWRP cannot mount a partition, go into mount section, tick system, data, boot, vendor and then reboot to TWRP again. Then try your previous operation. If it cannot mount data, go into wipe, advanced wipe, and click on format data, then restart TWRP and try again
seems like i somehow broke the partition table, cause it shows every storage as 0 mb and mounting isn't available, cant tick the option. Looks like i will have to find some service center to repair it by my own cost, by the end of the month. Though im giving it around the 25th so i got some more time till then, so maybe i find some solution to this problem.
Hey, so I managed to make the phone work again.
I have flashed boot cust recovery recovery2 and system from the italian marshmallow firmware, then I flashed that same firmware using dload method(tho it failed at 99%)
ØG_SQUAÐ said:
Hey, so I managed to make the phone work again.
I have flashed boot cust recovery recovery2 and system from the italian marshmallow firmware, then I flashed that same firmware using dload method(tho it failed at 99%)
Click to expand...
Click to collapse
You tried only once? Maybe you should now try to flash TWRP recovery and restore a backup made by TWRP. I can provide you one but for FRD-L09, not another. Another method would be to flash the rollback package and then retry flashing an EMUI 4.X ROM (dload method for both), hope you'll figure it out
I think i expressed myself wrong.
That was how i got the phone to work.
Oh lol I misunderstood because of the "it failed at 99%" and I thought the phone wasn't rebooting , no matter I'm glad you succeeded

Phone won't boot and can't do much from TWRP

Hi !
I installed TWRP to root my honor view 10 3/4 weeks ago.
Today I installed an update. And since then, the phone won't boot past TWRP (which I can access) or Huawei eRecovery mode.
When I land in the eRecovery mode it offers me to shutdown, reboot, or connect to wifi and do a factory reset. When I attempt the factory reset it tells me that downloading package info failed.
I tried to do a reset from TWRP without success gives me ERROR 9. I also tired to install the stock rom (update.zip) from TWRP and I also get ERROR 9.
I'm a complete noob when it comes to phones. Anyone have an idea of a solution ?
Thank you for reading !
Get a microsd card flash Dload file
aditya desai said:
Get a microsd card flash Dload file
Click to expand...
Click to collapse
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!
ouamakavoula said:
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!
Click to expand...
Click to collapse
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.
shashank1320 said:
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.
Click to expand...
Click to collapse
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks
ouamakavoula said:
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks
Click to expand...
Click to collapse
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first
shashank1320 said:
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first
Click to expand...
Click to collapse
When I try to boot the phone it displays the message that the phone in unlocked and should no be trusted, it shows the honor booting screen and after a few seconds shuts down and the process is repeating.
If i try to press the volume up key when booting it takes me to huawei eRecovery where I can either shutdown the phone or download recovery but it fails everytime.
Thanks
Try flash the No check recovery, boot into and wipe cache. Then reboot
Powered by View 10
Try this
1. Flash stock ramdisk img
2. Flash stock recovery img
3. Reboot to recovery with button combination ie; power and vol down together
4. Wipe data and cache
5. Reboot.
Hopefully it'll work if it doesn't flash system.img after 1 & 2 steps and follow the next steps
Hi please specify model
And what update you installed...
If the update was genuinely meant for phone I believe a data and cache partation format should fix this..
I hope you are atleast seeing the honor bootscreen...
Specify model so that we could point you to correct system.img
Also did twrp gave any errors formatting cache memory?
same here
BKL-L09

Tried it all with bricked Honor 6x. Any help is appreciated

I already posted here, but i was with no pc for some weeks so couldnt answer to the thread and now its old, Im back.
Situation is like this, huawei gr5 2017 (bll l22) bricked after bad flashing and software manipulation.
Vol down + power gets me to fastboot, it says phone unlocked and FRP unlock.
Download method with vol down + vol up + power doesnt work, always stuck at 5% saying "software install failed, incompatibility with current version" or doesnt say anything at all, just stuck at 5%.
Also, when i try to wipe data/factory reset from stock revoery it says "reset failed"
So dload method doesnt work, i also tried using DCPHOENIX software which saved one of my older huawei phones but it didnt work at all this time. When i flash a twrp recovery through fastboot, it flashes succesfully but when i boot into it it just boots into the stock one, and there the restore to stock option always fails after i connect to wifi saying that "failed to reach the server" or "failed to download the firmware", something like that.
I had twrp some days ago, out of the blue it booted into it. I had stock firmware on my sd card fortunately so i tried to flash the zip and itfailed with error 6 or 7, cant remember which. Anyways that twrp instance dissapeared after a reboot and now its always stock recovery, cant install twrp (described that above already).
So, do i have any options? nothing seems to work. no recovery, no dload, no dc phoenix, no fastboot (i tried flashing boot, system images through fastboot but it denied access to those partitions) flashing, i tried sp flash tool but the honor 6x roms have no scatter file and the flash tool requires one
Help, please. Ill appreciate it
What was your EMUI version before brick? Have you tried manually booting into TWRP? After you finish flashing don't reboot. Just hold power & volume down. If not then try to load TWRP recovery. It won't install but sort of load it. I don't know the exact command. If your phone is bootloader unlocked and frp unlocked try fastboot erase. System and then user data. I had a hard brick and it was even worse. No recovery, no fastboot and no dload. Just stuck. Managed to fix it myself without DC or Phoenix. So don't lose hope.
Mannan Qamar said:
What was your EMUI version before brick? Have you tried manually booting into TWRP? After you finish flashing don't reboot. Just hold power & volume down. If not then try to load TWRP recovery. It won't install but sort of load it. I don't know the exact command. If your phone is bootloader unlocked and frp unlocked try fastboot erase. System and then user data. I had a hard brick and it was even worse. No recovery, no fastboot and no dload. Just stuck. Managed to fix it myself without DC or Phoenix. So don't lose hope.
Click to expand...
Click to collapse
I cant remember if it was marshmallow or nougat so it was either emui 4 or 5. Im trying it all again and it doesnt work but ill keep doing it i guess
Try flashing recovery of nougat and then manually try to boot. Or maybe try to load the recovery without installation. It has a different command but I dunno.
hi, I have pretty much the same problem, somehow wiped the 'system' through TWRP. And since then I am trying to flash TWRP to boot, but I am getting nothing. I had EMUI 8
Tried flashing stock nougat through Multi Tool but no use, it succeeds but does not boot into anything, just the stock recovery whenever I turn it on.
Whenever I flash TWRP and try to boot into recovery (Vol-up+power), it would always boot into stock recovery.
Tried booting into eRecovery, but same thing.
Tried command fastboot boot RECOVERY-V2.img, but got the problem saying 'command not allowed'
what to do.

Categories

Resources