EDIT - Restarted PC, ran kingoroot again, fixed the issue
Hi All,
Ok, I have been trying to figure out what I have done wrong here, but after about 4 hours or troubleshooting, I'm at a loss.
I rooted the device using kingoroot, transferred to supersu and then activated the option for supersu to start at boot. This put me in a bootloop on the fire orange logo.
After reading about unbricking the device, I realised I needed to flash the stock image via adb sideload. I picked up the stock image for 5.6.1.0 (which is what it was on) from the rooting page link, and now kingoroot is failing.
Can someone help me out with this please as its driving me mad. Thanks
Related
Well.
Few days ago I recived the notification for the OTA update of the tablet. I have CWM Recovery (and the device rooted, of course) and i tried to apply the OTA normaly. When the device restarts to do the update, it gets stucked in the recover.
I tried to do a factory reset, but it dosen't work (stills getting stucked at any restart). I also tried to download the OTA files into my PC and apply them throught "adb sideload", but I only have found the files for G Pad 8 /8.3.
Someone have any idea?
Thanks for all!
XDA Visitor said:
Well.
Few days ago I recived the notification for the OTA update of the tablet. I have CWM Recovery (and the device rooted, of course) and i tried to apply the OTA normaly. When the device restarts to do the update, it gets stucked in the recover.
I tried to do a factory reset, but it dosen't work (stills getting stucked at any restart). I also tried to download the OTA files into my PC and apply them throught "adb sideload", but I only have found the files for G Pad 8 /8.3.
Someone have any idea?
Thanks for all!
Click to expand...
Click to collapse
Hello and welcome to XDA! I suggest you register and post your question in the following thread, which deals partly with LG Pad 7: http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995 People there might be able to help you out.
Good luck!
Hey guys, I recently got a Redmi Note, and decided to root it, as I've seen many good things come out of rooted phones. I didn't have access to a computer at the time, so I used Kingroot to root the Note. (I can't read Chinese, so I can't really tell what it did.) And success, it was rooted. Soon, an OTA update came and I decided to download and install it. It booted up fine, but apps kept crashing (incl Kingroot) and I couldn't even get to the landing page/homescreen. I searched up the internet to try and load a fresh stock rom into it, cause I wanted to unroot the phone. (and still do) I tried using the Mi PC suite and load the stock rom into it, but it got stuck at sending userdata.img, and now I'm stuck at the Mi.com logo. (There's no powered by android sign at the bottom.) I've tried getting into recovery, but whenever I press vol down + power button, it takes me straight to fastboot.
TL;DR: I was an idiot and downloaded an OTA update onto my Redmi Note that was rooted via Kingroot running a stock rom. Tried to use Mi PC suite to load the stock rom onto it, but got stuck at userdata.img, and got it into a bootloop. Seek to unroot it and start afresh with a stock rom.
Hi, thank you for using XDA Assist. The best palce to get help for your device in it's specific forum here, http://forum.xda-developers.com/redmi-note They are the experts on your device and should be able to help you.
Dear All
I like to think of myself as not a complete idiot, but sometimes things happen
Bricked my Lanovo A820 last week, I rooted it via MTK Droid, rooted perfectly, made back up of previous ROM but that had already been partially rooted. Installed CWM and all was good. Then the next day turned off and on and it was bricked, with message "Tool DL image Fail, uboot is blocking by dl info"
So I tried to install scatter file from previous back up using older version of SP Flash, connected ok, loaded files ok, but on reboot I still get same message.
I can no longer boot into CWM. Phone is picked up by SP Flash but not by MTK Droid anymore.
Can anyone point me in the right direction to get this phone up and running again, or at least to get into CWM.
Any help with this regardless of out come will be greatly appreciated.
Thanks in advance for any help.
AdieZZ said:
Dear All
I like to think of myself as not a complete idiot, but sometimes things happen
Bricked my Lanovo A820 last week, I rooted it via MTK Droid, rooted perfectly, made back up of previous ROM but that had already been partially rooted. Installed CWM and all was good. Then the next day turned off and on and it was bricked, with message "Tool DL image Fail, uboot is blocking by dl info"
So I tried to install scatter file from previous back up using older version of SP Flash, connected ok, loaded files ok, but on reboot I still get same message.
I can no longer boot into CWM. Phone is picked up by SP Flash but not by MTK Droid anymore.
Can anyone point me in the right direction to get this phone up and running again, or at least to get into CWM.
Any help with this regardless of out come will be greatly appreciated.
Thanks in advance for any help.
Click to expand...
Click to collapse
Anyone ????
I have a Proscan PLT7650G tablet it came installed with Android 5.1.1. It is running a RK3126 SoC. I had rooted it with Kingroot and then switched to SuperSU. I then tried to install Xposed framework for Lollipop using the Flashify app. The tablet rebooted and when I got to the login screen it had a message box "Stresstest for 5.0 has stopped running". When I hit OK another comes up that says "The process com.android.phone has stopped running". I hit OK and the previous message box comes up. This continues for as long as I keep pressing OK. Sometimes it also says that the System UI has stopped running. I cannot access any of the OS. I eventually tried to run the factory reset from recovery, and the same issue persisted. I assume this is because of the system partition being modified. I have backups of all the partitions made using the Rockchip Android tool. I tried to flash the tablet with the tool and it says Test device fail, or download fail. I have also tried to flash with Rockchip batch tool with firmware I thought may be compatible, and it gave me a similar message.
I didn't install custom recovery, but I can still access stock recovery, and can still get to the error messages after boot. I don't have USB development enabled, and fastboot doesn't recognize my bootloader.
Any help you can recommend will be extremely appreciated. I have spent the past week trying to get this thing running. I am very sorry if there is a similar thread posted somewhere or if it is a stupidly easy fix. I also apologize if this is posted in the wrong spot. I am new to forums in general.
I have very limited internet access, so it may take me several days to respond to any posts.
A HUGE thanks to anyone who can help me.
mordezmois said:
I have a Proscan PLT7650G tablet it came installed with Android 5.1.1. It is running a RK3126 SoC. I had rooted it with Kingroot and then switched to SuperSU. I then tried to install Xposed framework for Lollipop using the Flashify app. The tablet rebooted and when I got to the login screen it had a message box "Stresstest for 5.0 has stopped running". When I hit OK another comes up that says "The process com.android.phone has stopped running". I hit OK and the previous message box comes up. This continues for as long as I keep pressing OK. Sometimes it also says that the System UI has stopped running. I cannot access any of the OS. I eventually tried to run the factory reset from recovery, and the same issue persisted. I assume this is because of the system partition being modified. I have backups of all the partitions made using the Rockchip Android tool. I tried to flash the tablet with the tool and it says Test device fail, or download fail. I have also tried to flash with Rockchip batch tool with firmware I thought may be compatible, and it gave me a similar message.
I didn't install custom recovery, but I can still access stock recovery, and can still get to the error messages after boot. I don't have USB development enabled, and fastboot doesn't recognize my bootloader.
Any help you can recommend will be extremely appreciated. I have spent the past week trying to get this thing running. I am very sorry if there is a similar thread posted somewhere or if it is a stupidly easy fix. I also apologize if this is posted in the wrong spot. I am new to forums in general.
I have very limited internet access, so it may take me several days to respond to any posts.
A HUGE thanks to anyone who can help me.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please ask your question here:
Android Q&A
You'll receive expert advice there. Good luck!
Hi guys. My LG x145 has been bootlooping since Monday and I can't seem to fix it.
My brother tried to flash it with CM 11 and maybe messed with the steps and its been bootlooping since.
We have tested the phone to see if it's bootlooping on its own. We removed the battery for an amount of time then return it in place to see if the phone will turn itself on. It didn't so flashing a rom to the phone and messing up the process must have lead to the device bootlooping.
We can't:
enter recovery mode
enter download mode
enter bootloader
Whenever we tried booting the phone to recovery mode, the phone would start up normally and display the LG logo with a note below it that it is booting up in recovery mode. But after a few seconds, it would turn itself off and on again.
--------
We tried:
using adb to boot in the aforementioned boot states
flashing it with lg flash tool 2014
following some posted answers in some forums with the use of lg mobile support and lg pc suite
-------
The problem with the above is that the device can't be detected despite having installed the drivers when I rooted the phone last year. I rooted the phone using my laptop and kingo root.
Any form of help is much appreciated. Thanks in advance.
dcd3lt4 said:
Hi guys. My LG x145 has been bootlooping since Monday and I can't seem to fix it.
My brother tried to flash it with CM 11 and maybe messed with the steps and its been bootlooping since.
We have tested the phone to see if it's bootlooping on its own. We removed the battery for an amount of time then return it in place to see if the phone will turn itself on. It didn't so flashing a rom to the phone and messing up the process must have lead to the device bootlooping.
We can't:
enter recovery mode
enter download mode
enter bootloader
Whenever we tried booting the phone to recovery mode, the phone would start up normally and display the LG logo with a note below it that it is booting up in recovery mode. But after a few seconds, it would turn itself off and on again.
--------
We tried:
using adb to boot in the aforementioned boot states
flashing it with lg flash tool 2014
following some posted answers in some forums with the use of lg mobile support and lg pc suite
-------
The problem with the above is that the device can't be detected despite having installed the drivers when I rooted the phone last year. I rooted the phone using my laptop and kingo root.
Any form of help is much appreciated. Thanks in advance.
Click to expand...
Click to collapse
Hi
Thank you for using XDA Assist
Sorry for the inconvenience. Cant find any specific thread for your device but you may post here for now
http://forum.xda-developers.com/android/help
Thank you..