I flash newest TWRP.ZIP in my pixel 3,But it will let my phone repeated go in Twrp, it will not go into OS.
what problem about it?
or don't flash Twrp in pixel 3?
just use bootloader go into??
thank guys
Related
I followed instructions carefully. Unlocked boot loader, installed Beta 11 (newest one), flashed TWRP. Next, flashed windows flasher.bat.......... back to fastboot, booted into recovery, VOILA, no TWRP, standard recovery. Reboot and stuck on bootloader. Have to unbrick and back to square one. happened 2 times. Now, there is an option in MIUI 10 unpack that has "flasher windows no format.bat. Anyone else having this problem?
Reading the instruction on the miui rom thread, i guess to understand that you need to boot twrp, it means you need to boot it like when you go to install it, miui rom has no twrp integrated, so in bootloader run twrp img via adb then install it as usual then flash the last miui 10 fix zip... Note that i give you this advice only by reading the thread because i've not tried that rom
I understand your apprehension, I would also, but thanks for your input.
The issue is when you flash miui 10 via instructions, it wipes out everything, so you have to re install twrp, but miui10 fixes zip is gone, and therefore it reboots to a frozen fastboot. OH well.........
Why you don't try to flash bluespark twrp recovery in fastboot? perhaps you need to reboot to recovery and flash magisk
Toni Moon said:
Why you don't try to flash bluespark twrp recovery in fastboot? perhaps you need to reboot to recovery and flash magisk
Click to expand...
Click to collapse
I'll try blu spark, if that doesn't work, i'll try to flash the rom via twrp, and now cmd
You have to use OB8 in both slots or else MIUI 10 won't work.
ProtoDeVNan0 said:
You have to use OB8 in both slots or else MIUI 10 won't work.
Click to expand...
Click to collapse
how the heck do you do that??
could all this be because i'm on beta 11 and not 8?
My understanding is, if you reboot out of twrp you'll bootloop? You have to flash twrp-installer-3.3.1-2-guacamole.zip to install twrp? My question is, why? In my OP6 I could flash things from fastbooting into twrp then reboot back to oos. I may be wrong.
Try flashing twrp with this. You should be fine to flash anything in the most updated version from here and reboot with no issues. (as long as you do everything properly)
https://forum.xda-developers.com/oneplus-7-pro/development/recovery-unofficial-twrp-recovery-t3931322
Deleted
SysAdmNj said:
My understanding is, if you reboot out of twrp you'll bootloop? You have to flash twrp-installer-3.3.1-2-guacamole.zip to install twrp? My question is, why? In my OP6 I could flash things from fastbooting into twrp then reboot back to oos. I may be wrong.
Click to expand...
Click to collapse
In the guide (TWRP thread) linked previously, it says: "If you will flash the installer and you are stock you need also to flash magisk or your phone will not boot again"
What you are asking seems a little different. You proposing to only fastboot boot TWRP, then flash something (Magisk?). Not sure if that will work. Even if it did, you would not have TWRP installed as a recovery. I would not consider a modded phone without a custom recover to be a desirable state.
redpoint73 said:
In the guide (TWRP thread) linked previously, it says: "If you will flash the installer and you are stock you need also to flash magisk or your phone will not boot again"
What you are asking seems a little different. You proposing to only fastboot boot TWRP, then flash something (Magisk?). Not sure if that will work. Even if it did, you would not have TWRP installed as a recovery. I would not consider a modded phone without a custom recover to be a desirable state.
Click to expand...
Click to collapse
Thats exactly what I used to do on the my OP6.
fastboot boot TWRP
Flash something
reboot back into OOS, keeping stock recovery
SysAdmNj said:
reboot back into OOS, keeping stock recovery
Click to expand...
Click to collapse
But why? Stock recovery is close to useless. And not needed to flash OTA updates.
Hi all,
I just updated to 10.3 on my 7 pro plus. I know I really don't need twrp I do have the stock recovery but I like twrp. If I go thru the adb route, booting into twrp img and installing twrp zip, will it install into both slots? And will I lose root? Thanks for any help.
I'm not sure on the answer to your question but I used this guide to update and I didn't lose twrp.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-bootloader-unlock-twrp-install-t3940368
Boot img, flash zip, flash magisk. Should give you twrp and keep root.
Thanks all. I just bit the bullet and tried flashing twrp.img from the twrp site to install the twrp.zip but the screen just stayed on fastboot so I rebooted into normal then attempted again with mauronofrio img and zips. ( Then I had to Magisk after I rebooted recovery.) It's all good. I hope this helps someone else as well.
Hello,
i have a question about getting into Recovery or maybe i have to install it again?
So i installed twrp following this guide
Install LineageOS on walleye | LineageOS Wiki
wiki.lineageos.org
At first i installed the Lineage OS recovery but wasnt able to flash a ROM with that so i switched and installed twrp.
It was installed to slot A.
I then went ahead and installed an ASOP ROM.
Now the ROM is working fine and i wanted to go into TWRP and do a Backup.
However i cant get into TWRP. Not with key combos nor with adb reboot recovery.
All i get is the fallen Android Robot picture.
I guess i wrote the image to Slot A as well and now have no recovery left.
Do i have to flash TWRP again and this time to Slot B?
I dont wanna brick anything by accident as i have seen some posts where people switched Slots and got bricks / semi bricks.
Thanks for any help or clarification.
Kind Regards
Hello mate, i never reinstalled twrp on my pixel 2 after catching a bootloop after installing it and then flashing magisk so stuck with using fastboot to fastboot boot twrp when I wanted to flash a ROM/mod.
Sounds strange that twrp was only on 1 slot as the twrp installer zip should flash both slots when flashed?
With regard to losing twrp you'll probably find that the new ROMs recovery has overwritten your twrp recovery during the flashing process giving you a stock recovery again (Fallen android). When I was using a 6T which is an A/B slot device you always had to reflash the twrp installer after a ROM flash to keep twrp installed.
I'd check the official twrp thread re backing up with twrp as it did have problems either backing up or restoring last I used it.
Hope that's some help.
My phone is stuck in boot loader mode. I tried to install a custom rom and flashed everything but i got an error while installing it and it came out of twrp recovery and noe it is stuck and is not switching on. Please help
https://forum.xda-developers.com/t/...4-0-58-international-oxygen-os-9-0-2.3903272/
Use that if your phone is international model if not look around for the t-mobile msm tool. More details, more help. What exactly did you flash, how did you flash it, what recovery did you use....
flash713 said:
https://forum.xda-developers.com/t/...4-0-58-international-oxygen-os-9-0-2.3903272/
Use that if your phone is international model if not look around for the t-mobile msm tool. More details, more help. What exactly did you flash, how did you flash it, what recovery did you use....
Click to expand...
Click to collapse
I was trying to install evolution x rom after wiping the data we should flash the os to install custom rom right so i flashed the os and while installing some error occured it came back to bootloadr mode and is stuck. I was using twrp recovery.I saw a youtube video and was doing everything
please tell me what to do
[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 6
Similar to the previous threads for OnePlus 5 or OnePlus 5T, here are the necessary packages to unbrick/revive a hard bricked OnePlus 6. Download: https://www.androidfilehost.com/?w=files&flid=271466 OnePlus 6_180513_氢OS线刷包.rar After using it...
forum.xda-developers.com
How to flash a rom on oneplus 6.
Boot twrp: fastboot boot twrpxxxxx.img
Fash firmware OOS 10.3.9 or whatever latest is for your device. Get from repo on guides section here or from oxygen updater app. Make sure it's for your device. Don't flash global OOS on tmobile model...After flashing OOS latest, flash EvoX rom, flash twrp installer zip, flash finalize zip, reboot recovery, flash magisk latest. I use canary, format data-swipe to confirm in twrp, reboot system.
That's how you flash a rom on oneplus 6. Finalize is a script that can be found with simple search here on xda that copies firmware to both slots so you don't have to reboot recovery and flash OOS again. I used a Oneplus 6t a year prior to what I use now Pixel4XL and I flashed everything known to mankind available for it just this way.
Boot twrp,
Flash OOS,
Flash EvoX,
Flash twrp installer zip,
Flash finalize zip,
Reboot recovery,
Flash magisk
Format data-swipe to confirm yes,
Reboot system.
Update magisk once booted via magisk manager app icon in app drawer.
You should be able to hold down power+volume up and get in to bootloader node again and do this. Just keep holding them down till you see the "start" screen and let go, boot twrp from fastboot...