Heya peoples, I have a problem and am hoping for some help in a work around.
I am trying to root my J3 but my volume up button does not work. I have adb installed, and the correct drivers for my phone. I can use adb command to reboot to the bootloader and it brings me to the Odin "downloading" screen. I can then use the program to install TWRP so I can root. Everything goes fine up until this point. After TWRP is installed there is a single massive problem I am hoping there is a work around for. My volume up button does not work. I can only reboot to recover using adb once the phone boots up, and I read that if you let that happen it overwrites TWRP with the stock recovery (which is what happens when I do this). I read that you have to reboot directly from the downloading screen into recovery using Vol up and home and power. But I can't do that since my Vol up doesn't work. When I am at the download screen after installing TWRP none of the adb commands work so I can't reboot directly to recovery to access TWRP the first time. I hope this all makes since, and I hope someone has some advice because as far as I can tell I can't continue passed this point without a working volume up button.
A little more info in case it matters. When using adb command prompt I have to type ".\adb" instead of "adb" as the tutorials say. When I do ".\adb devices" my device shows up as connected. After rebooting to the bootloader using adb, typing ".\fastboot devices" shows nothing is attached, and any command I try to put in results in "waiting on devices". Checking the device management at this point does not show any unknown usb devices (one guide I read said if fastboot wasn't recognizing to check to update drivers if something was showing as unknown usb".
Basically hoping there is some way of booting directly to recovery from bootloader without having to use the vol up key combination so I can access TWRP for the first time. Any help at all is appreciated. I realize having a working volume button would take all the headache out of this but unfortunately fixing it is not an option at the moment.
Edit: I have also unlocked the bootloader using the Crom Services app from samsung, and have developer options and usb debugging enable.
Question: If I use an app to remap the buttons would that work? Wont be around a computer until tonight. Does remapping the buttons affect it at the level of being in bootloader (because if so I could just switch the up and down volume, use adb to reboot to bootloader then power/home/and remapped volume to reboot to recovery). But I feel like it wouldn't work if the app is not actually changig it but intercepting the button press and then changing it. I dunno.
CopaseticDream said:
Question: If I use an app to remap the buttons would that work? Wont be around a computer until tonight. Does remapping the buttons affect it at the level of being in bootloader (because if so I could just switch the up and down volume, use adb to reboot to bootloader then power/home/and remapped volume to reboot to recovery). But I feel like it wouldn't work if the app is not actually changig it but intercepting the button press and then changing it. I dunno.
Click to expand...
Click to collapse
Can this device even be rooted? Doesn't virgin lock their devices?
In any case if you flash twrp to the boot partition (rename it to boot.img) it'll boot directly to twrp then just use twrp to flash to the recovery partition.
Reflash the stock boot.img back to the boot partition.
Related
I'm attempting to flash clockwork recovery and can't get the phone to respond to fastboot devices when in fastboot mode. I've tried everything I can find with regards to the drivers (pdanet, usbdeview, etc) and I can get google's and pdanet's drivers working fine with the phone booted normally (responds to adb devices). The problem seems to be that windows appears not to even notice that the phone is plugged in in fastboot mode and does not appear in the device manager, making the manual installation of drivers an impossibility.
Anyone know how to fix this?
stoo said:
I'm attempting to flash clockwork recovery and can't get the phone to respond to fastboot devices when in fastboot mode. I've tried everything I can find with regards to the drivers (pdanet, usbdeview, etc) and I can get google's and pdanet's drivers working fine with the phone booted normally (responds to adb devices). The problem seems to be that windows appears not to even notice that the phone is plugged in in fastboot mode and does not appear in the device manager, making the manual installation of drivers an impossibility.
Anyone know how to fix this?
Click to expand...
Click to collapse
in the main setting, application, developer settings.. is usb debugging enabled?
stoo said:
I'm attempting to flash clockwork recovery and can't get the phone to respond to fastboot devices when in fastboot mode. I've tried everything I can find with regards to the drivers (pdanet, usbdeview, etc) and I can get google's and pdanet's drivers working fine with the phone booted normally (responds to adb devices). The problem seems to be that windows appears not to even notice that the phone is plugged in in fastboot mode and does not appear in the device manager, making the manual installation of drivers an impossibility.
Anyone know how to fix this?
Click to expand...
Click to collapse
When I first set up ADB and Fastboot on my pc, I was getting a response when writing 'adb devices' in the console. However, 'fastboot devices' returned absolutely nothing.
Solution (with phone connected to pc and usb debugging cheched):
1-shut down the phone
2-press and hold Volume Up key + Power
3-once in bootloader interface, in the pc command prompt, type 'fastboot devices'.
Voila!
By the way, don't mount the phone as usb storage device.
Thanks for the responses guys but yes, USB debugging is enabled and yes, I've used that way to get to fastboot mode as well as adb reboot bootloader
Hi stoo
I have a same issue - did you managed to find solution for yours?
Cheers,
Wiktor
vstar said:
Hi stoo
I have a same issue - did you managed to find solution for yours?
Cheers,
Wiktor
Click to expand...
Click to collapse
easy way to set up fastboot
Any solution
Have the same problem: locked bootloader, not rooted 4.1.2. In ADB everything is ok, drivers ok (in device manager), can get it through "adb devices". But when I boot in fastboot (adb reboot bootloader), I hear the ti-da windows sound (usb unpluged - from adb session), but no ta-di when the phone re-boot in fastboot. No exclamation mark in device manager, nothing. The USB receive nothing when in fastboot. Is it possible that the fastboot image is corrupted? Can I reflash it? Or any other advice?
Thanks
EDIT - SOLVED - at least this step
The problem was the famous "broken power button"! I knew that I had problems with the power button (didn't work - that's why I try to flash a rom (4.2.1 or customized) with sleep tile in notification area).
I thought that the button is all the time OFF and don't switch to ON, but I finally understood that when when I boot in fastmode it freeze before installing device on the PC (I also had no volume up / down navigation in fastboot, a sign that it was frozen). So I ended to consider that the power button was permanently in ON position. I opened my phone and I measure the impedance on the power button. I had ~ 4ohms in off position of the button and 1.8 ohms (cheap multimetter.... probably should be almost 0) in on position. I measured also on volume switch where I had ~ infinite on off position, so I concluded that the button if blocked. I tried to see if I can resurrect it but no choice, so I took it off (unsoldered). I put the battery and the USB cable and boot it. From ADB I reboot it in fastboot and voila! The device popped in device manager! One problem solved! BUT...
I tried to use the Nexus Root Toolkit and it boots in fastmode and try to unlock the bootloader, but it asked me on phone screen if I agree for unlocking. I was able to use the volume to select Yes but I couldn't choose it with power! I had no option but to take the battery off. Starting from that point it was almost impossible to power it again. When I plugged the USB it shown the battery icon (charging). I tried every trick that I found on web, but nothing worked (even to fast plug / unplug many times the USB to overcharge it, but nothing). I was able only by pressing on the middle of volume (so Up and DOWN in the same time) and plus the USB to get to the screen of unlocking bootloader, but without the options YES/NO on the screen. Seems that it saves this state between boots, but why no option? Finally I was unable to boot at all, and it is like totally bricked
I thought that the power button is a simple switch ON / OFF, so I soldered 2 wires and I tried to touch them (short circuit) to simulate the ON, but nothing happened. Is it the button more complex that a simple switch? no ideea...
So now have a better phone than before (at least theoretically it should be able to fastboot), but it values zero because I can't power it on....
OK So I am in the exact same situation.
Nexus S, Broken power button, adb can see the device, fastboot cannot. fastboot cannot be navigated with the volume keys.
I also want to put an other rom onto it, but firstly I want to put TWRP recovery on it, as it supports touch, CW needs the power
button which like mentioned does not work.
I would rather not unsolder my power button to get into fastboot, any suggestions on how that might still be achieved?
thx
catalinu said:
Have the same problem: locked bootloader, not rooted 4.1.2. In ADB everything is ok, drivers ok (in device manager), can get it through "adb devices". But when I boot in fastboot (adb reboot bootloader), I hear the ti-da windows sound (usb unpluged - from adb session), but no ta-di when the phone re-boot in fastboot. No exclamation mark in device manager, nothing. The USB receive nothing when in fastboot. Is it possible that the fastboot image is corrupted? Can I reflash it? Or any other advice?
Thanks
EDIT - SOLVED - at least this step
The problem was the famous "broken power button"! I knew that I had problems with the power button (didn't work - that's why I try to flash a rom (4.2.1 or customized) with sleep tile in notification area).
I thought that the button is all the time OFF and don't switch to ON, but I finally understood that when when I boot in fastmode it freeze before installing device on the PC (I also had no volume up / down navigation in fastboot, a sign that it was frozen). So I ended to consider that the power button was permanently in ON position. I opened my phone and I measure the impedance on the power button. I had ~ 4ohms in off position of the button and 1.8 ohms (cheap multimetter.... probably should be almost 0) in on position. I measured also on volume switch where I had ~ infinite on off position, so I concluded that the button if blocked. I tried to see if I can resurrect it but no choice, so I took it off (unsoldered). I put the battery and the USB cable and boot it. From ADB I reboot it in fastboot and voila! The device popped in device manager! One problem solved! BUT...
I tried to use the Nexus Root Toolkit and it boots in fastmode and try to unlock the bootloader, but it asked me on phone screen if I agree for unlocking. I was able to use the volume to select Yes but I couldn't choose it with power! I had no option but to take the battery off. Starting from that point it was almost impossible to power it again. When I plugged the USB it shown the battery icon (charging). I tried every trick that I found on web, but nothing worked (even to fast plug / unplug many times the USB to overcharge it, but nothing). I was able only by pressing on the middle of volume (so Up and DOWN in the same time) and plus the USB to get to the screen of unlocking bootloader, but without the options YES/NO on the screen. Seems that it saves this state between boots, but why no option? Finally I was unable to boot at all, and it is like totally bricked
I thought that the power button is a simple switch ON / OFF, so I soldered 2 wires and I tried to touch them (short circuit) to simulate the ON, but nothing happened. Is it the button more complex that a simple switch? no ideea...
So now have a better phone than before (at least theoretically it should be able to fastboot), but it values zero because I can't power it on....
Click to expand...
Click to collapse
Yes, it should have been better for me to have also a possibility to enter in fastboot with the power button blocked in ON position, but I didn't find. And now I know no way how to power it up...
fastboot drivers
http://www.samsung.com/us/support/owners/product/GT-I9020PWAATT#
has anybody considered using this executable from samsung ..
from what i understood when installing it ,it only unzips the contents at programfiles/Samsung/drivers
then you can check this thread to install them spesifically http://forum.xda-developers.com/showthread.php?t=1901617
..In short.
Go to
"Device Manager"
find
"Android 1.0" or something like that (i had my device in fastboot/bootloader mode, dont know if it was necessary)
install drivers from the drivers directory and install
P.S. Mine is an ordinary 9023nexus s (slcd) though
be a bit more careful with nexus s4g
Howdy XDA, lurking for a few weeks now, first time posting.
I have a Vodafone Smart 2, which runs pretty much the same hardware as the Alcatel V860. I previously rooted it myself, removed crapware, blah blah. This worked fine until I updated the firmware through the Firmware Upgrade Manager, which restored all the crapware on my phone and somehow removed my root privileges.
Now, when I try to root using the same method I used to root the phone previously, I run into an error. Normally, I would root from a zip file on the SD card through the bootloader/recovery menu. Now, when I try to access this menu, I'm greeted with a message stating: 'All data will be lost, continue?' in various languages.
This obviously doesn't allow me to root my phone through the familiar method, which was, as far as I know, the only method to root this particular type of phone. I have tried using the sdk manager but this came up as a dead end.
I would be extremely grateful if anybody can give me any information or ideas as to how to root this phone again?
Cheers.
Maybe you're pressing the wrong buttons? I remember that if I pressed volume down + power button instead of volume up a different thing happened.
Scorpius666 said:
Maybe you're pressing the wrong buttons? I remember that if I pressed volume down + power button instead of volume up a different thing happened.
Click to expand...
Click to collapse
Hi there, thanks for replying.
Normally I would hold the power & the volume + buttons, which would bring me to the bootloader menu. Doing so now just brings up the 'All data will be lost, continue?' message.
Interestingly enough, holding the power & the volume - buttons causes the phone to freeze on the android startup logo, which leaves me with no other option than the pull the battery and try again.
Can't you use adb reboot recovery or sth like that?
Sent from my GT-I9100 running CM10
MemoryController said:
Can't you use adb reboot recovery or sth like that?
Sent from my GT-I9100 running CM10
Click to expand...
Click to collapse
Hi there, using the command 'adb reboot-recovery' simply refreshes the list that first comes up when you execute adb.exe within Command Prompt.
I am able to reboot using the 'adb reboot' command though, so the drivers must be in working order.
seanmaxwell99 said:
Hi there, using the command 'adb reboot-recovery' simply refreshes the list that first comes up when you execute adb.exe within Command Prompt.
I am able to reboot using the 'adb reboot' command though, so the drivers must be in working order.
Click to expand...
Click to collapse
Hi there
do what you did using "adb reboot" dos command, but type in " adb reboot recovery " instead while the phone is on, phone goes off and on into boot menu , where you can do your rooting(update.zip) from sdcard.
hope that helps you,
I've been trying to flash a new kernal on my (rooted) Kacaso M766 and there really isn't much support for it anywhere.
Nevertheless, I have (as far as I know) successfully installed adb. Everything appears fine in adb, at least. Using the "devices" command shows the tablet, back up works, resetting adb with the root permission command works, and I was able to create a debug dump, but when I use the reboot to bootloader command, my tablet reboots to the OS still.
Any ideas of what could be wrong?
I can't get to the bootloader via button combinations, but I've figured out how to get to Fastboot and Recovery with button combinations and even safe mode, but none of them bring up the bootloader screen. There are only three buttons but like I said, little to no support for this manufacture so it might be some strange button combo for all I know.
Also when I go into fastboot then plug in a USB the tablet shows up as WM8950. Any idea what drivers would I use?
Any help would be welcome. :good:
Dear All,
Please help me regarding fastboot. When I press 3 keys (vol-up, vol-down and power key) while phone is off. I see the black and white screen written boot modes. From there when I select AP Fastbood device is restart with red Motorola logo and end up on home screen.. I have tried several times to turn off the device and repeat this process but no issue still there..
Moreover, if I did not select any options from boot modes than device automatically rebooted after 3 or 4 seconds..
Please help me out.. I want to unlock the boot loader root and install custom ROM..
Currently Model Number is XT925 and device is completely stock.. never rooted before...
thanks and regards,
akkay1 said:
Dear All,
Please help me regarding fastboot. When I press 3 keys (vol-up, vol-down and power key) while phone is off. I see the black and white screen written boot modes. From there when I select AP Fastbood device is restart with red Motorola logo and end up on home screen.. I have tried several times to turn off the device and repeat this process but no issue still there..
Moreover, if I did not select any options from boot modes than device automatically rebooted after 3 or 4 seconds..
Please help me out.. I want to unlock the boot loader root and install custom ROM..
Currently Model Number is XT925 and device is completely stock.. never rooted before...
thanks and regards,
Click to expand...
Click to collapse
After you use the volume down key to highlight "Fastboot", do you then press the volume up key to select it? If you just sit there and wait it will reboot normally. You must press the volume up key after you've highlighted the menu option.
akkay1 said:
Dear All,
Please help me regarding fastboot. When I press 3 keys (vol-up, vol-down and power key) while phone is off. I see the black and white screen written boot modes. From there when I select AP Fastbood device is restart with red Motorola logo and end up on home screen.. I have tried several times to turn off the device and repeat this process but no issue still there..
Moreover, if I did not select any options from boot modes than device automatically rebooted after 3 or 4 seconds..
Please help me out.. I want to unlock the boot loader root and install custom ROM..
Currently Model Number is XT925 and device is completely stock.. never rooted before...
thanks and regards,
Click to expand...
Click to collapse
try this,
-install adb on your pc
-plug in phone when powered up
- open a command prompt in your adb dir
- type in: adb devices then enter. it should show your phone in the prompt. also check your phone, there may be a popup to acknowledge.
- rerun adb devices until it shows your phone properly or you cant proceed
-now type in: adb reboot bootloader
if it works, the phone should reboot to the fastboot screen.
if it doesnt stick in fastboot, im sorry but i dont know what else to tell you to try.
Thank-you for the Response
bweN diorD said:
try this,
-install adb on your pc
-plug in phone when powered up
- open a command prompt in your adb dir
- type in: adb devices then enter. it should show your phone in the prompt. also check your phone, there may be a popup to acknowledge.
- rerun adb devices until it shows your phone properly or you cant proceed
-now type in: adb reboot bootloader
if it works, the phone should reboot to the fastboot screen.
if it doesnt stick in fastboot, im sorry but i dont know what else to tell you to try.
Click to expand...
Click to collapse
Thankyou so much for the reply, i followed your instructions and finally get in fastboot mode and unlocked the boot loader. However, is there any way from which I can go into recovery.. because through hardware way I am unable to go in recovery. Thanks
EDIT: I have tried entering command adb reboot recovery, then phone was rebooted and there was green android on screen with chest open.. thats it... i have waited for few minutes and rebooted the device mannually.
akkay1 said:
Thankyou so much for the reply, i followed your instructions and finally get in fastboot mode and unlocked the boot loader. However, is there any way from which I can go into recovery.. because through hardware way I am unable to go in recovery. Thanks
EDIT: I have tried entering command adb reboot recovery, then phone was rebooted and there was green android on screen with chest open.. thats it... i have waited for few minutes and rebooted the device mannually.
Click to expand...
Click to collapse
That's the entry to stock recovery. You have to push a combination of buttons from there to get into recovery. I forget the button combination, it has been posted many times, try searching or wait for someone else to jump in with the answer.
Sent from my LG-VS980 using XDA Premium 4 mobile app
Not sure where to post this question been reading so many post my eyes are tired......
- XT926 upgraded to kitkat 183.46 last week via flash in RSD from JB 4.1.2
- Root went well DONE (Towel root .apk)
- Unlock went well DONE (Motopocalypse .apk) yes fastboot shows the #3
- Flashed TWRP 2.7.1 DONE (did it using the adb in motopocolypse)
- Backed up my current stock ROM in TWRP seemed to go well the program confirmed the backup was successful...So I thought
- Got confident and wanted to try flashing CM11 (Kitkat version)
- After flashing CM11 my phone got stuck at boot like many others have.... no problem I backed up my stock ROM in TWRP.....So I thought
- Went to restore my stock ROM using TWRP and yup you guessed it like many others the restore failed half way through
Not a big deal starting fresh can be a good thing BUT I really need my old text messages and all I have is a USB backup of the phone (Internal/SDcard) on my PC and of course the TWRP back-up on the SDcard that won’t restore ...... Is there any way to get these messages back to my phone????
wonka144 said:
Not a big deal starting fresh can be a good thing BUT I really need my old text messages and all I have is a USB backup of the phone (Internal/SDcard) on my PC and of course the TWRP back-up on the SDcard that won’t restore ...... Is there any way to get these messages back to my phone????
Click to expand...
Click to collapse
Not sure how to help you with your immediate problem at hand, but going forward, I definitely recommend the sms backup + from the Google Play Store. Nice thing with that app is, you can link it to your gmail account, and all your text messages are backed up to your gmail.
Hi guys,
I currently have some issues with my beloved N5. I try to be as specific as I can (therefore the text will be a bit longer)
First things first: My device is experiencing the well known "stuck power button problem".
But I also do have problems which are not related to that one (at least thats what I believe).
Overview:
CM 13.1
ElementalX Kernel
TWRP on 3.0.20
Main issue: I can not start my phone regularly. When not plugged in, it just does not respond at all.
If it is plugged in I can get into the bootloader with only pressing Volume down (because the power button is stuck inside). Weird fact #1: in bootloader the power button should work to confirm a specific task like Start, or boot into recovery but it doesnt. Also: the phone is steady in the bootloader and does not keep rebooting.
Therefore I wanted to perform a backup (nandroid or at least all media) and reflash my ROM to see whether it is more of a software issue. I tried booting into TRWP which is not working (device shuts down after Google logo (might be because of the power button issue?).
I know that I can flash the recovery again through adb or the Nexus ToolKit but obviously I want to save my data first.
As far as I know there is no option as adb pull or through the recovery to save those only being in bootloader mode, am I right?
Question: Can I dirty flash without losing data? If thats not the cure, what else could help?
Other facts to know: while running
Code:
adb devices
I get that the
Code:
"adb server version (36) doesnt match this client (35): killing...
but then:
Code:
*daemon started successfully*
(same in Nexus Toolkit).
If I continue with
Code:
adb backup
it says: no devices / emulators found. Altough the nexus toolkit (and fastboot devices) say:
Code:
FASTBOOT: 03181238e07723e0 fastboot
If you made it until here thank you for reading :good: and I would be even more pleased if someone could help.
Best,
McRacoon
I have this problem to , i cant use my volume and power button in ROM / TWRP ,
I got lost, which data you want to save ?
fastboot flash boot recovery.img | fastboot reboot than gets you to recovery from where you can save data.
@Redchi: not really exactly my problem but if you can get into recovery you can use your touchscreen in TRWP?!
@icrunchbanger thanks for your reply.
I want to save all my data like videos, pictures, whatsapp chats etc.
I know how to flash the recovery (again). The question was whether I can save any data without a working recovery (just from the bootloader). Imo it is not possible but maybe you guys know how to do so.
If I reflash the recovery I still can not enter it as the phone reboots itself every 5 seconds due to the stuck power button. The reflashing operation is not finished (Nexus Toolkit says: "Waiting for your device" and times out after a while) and the battery icon pops up every 3 seconds.
Edit: and yes I tried several workarounds to unstuck the power button like flicking against the button, tapping on table, cleaning etc. The only thing I haven't done is tearing the motherboard apart and replacing the whole button itself.
I recommend removing the motherboard, applying pure alcohol around the area, and then quickly pressing and releasing the power button? If this doesn't work, I suggest replacing the power button.
i can use button to get bootloader + TWRP , but my Button volume up down and power cant use in Rom or TWRP, i do no this software or hardware ,? my nexus normaly use but not have button , I use mikey or double tab to wake get screen on , i use apk to get volume , sorry bad english