Spigen Case and Camera Module Giveaway - LG G5 Accessories

Hi all,
I recently lost my much liked G5. I have a Spigen case (gunmetal/black) and a camera module to give away. Both in very good to new condition as I hardly used either (see attached pic). Yours for the postage. Just PM me and I will give you my address so you can send a pre-paid shipping envelope.

Never managed to get a case for my LG G5, is the spigen one durable? Or is it more of a functional case?

jamgooandyou said:
Never managed to get a case for my LG G5, is the spigen one durable? Or is it more of a functional case?
Click to expand...
Click to collapse
https://www.spigen.com/collections/lg/products/lg-g5-case-tough-armor

Related

Which original case to buy?

I wonder which original case from Oneplus will be the best for Oneplus 6?
I never had Oneplus phone and I don't know this cases.
Could You explain me difference between Bumber Case and Protective Case?
I think about carbon. I would like to choose case that will the best protector for my phone. This is the most important for me. I consider only original cases. I will buy original screen protector too.
From specification I see that Bumber Case is heavier 25g vs 11g. So I think that will be better
I've owned both the OnePlus 3 and the OnePlus 5. In my experience, the bumpers are no more then just fancy shells for the phone that don't exactly feel like the offer that much protection to the phone, and I ended up buying Tudia full body cases for both phones. If you want a OnePlus case though, go with the Silicone one - had that for my OP5 and I loved it honestly. However, I feel that OnePlus cases are more crafted for their style than they are for the protection they offer (which is quite depressing, as the Sandstone cases felt so nice to hold in your hand), so you might want to consider looking elsewhere for a case.
As for screen protectors, the tempered glass ones by OnePlus themselves are usually the best, but a lot of cases don't work with them (including the Otter Box case offered by OnePlus). Third party TGSPs are cheaper, but they aren't 3D and often let dust slip in underneath. I ended up slapping a OnePlus TGSP onto my OP3 and then adding a Tudia full body case with a built in screen protector, and that thing survived so much abuse (and is still kicking actually).
I actually had the Carbon case with a OP tempered glass screen protector on my OP5, and the case did nothing to absorb the impact from a fall at work and shattered the glass. The case was nothing more than a hard plastic shell honestly.
But that's just my two cents
I'm gonna wait for third parties first. Till then a poach is the way for me.
Gramzz said:
I wonder which original case from Oneplus will be the best for Oneplus 6?
Click to expand...
Click to collapse
Get the OnePlus carbon bumper, top quality made by EVUTEC. The bumper case protects more. The normal case does not protect the top, bottom and buttons that well.
@Ph0enix_216
Thank you for your wide useful opinion.
Do somebody know will be spigen neo hybrid for Oneplus 6?
I used this case for note 3 and was great as a protective case.
Saved few times my phone.
I think I will buy original case during buying phone because free shipping is from 100 euro so it's better to buy with phone.
But if spigen will be good I will buy too
Would love to get the iron man case from the avengers edition
tbalden said:
I'm gonna wait for third parties first. Till then a poach is the way for me.
Click to expand...
Click to collapse
Looks like the 3rd parties have already gotten started! Just had a look now for mine, and seems like Orzly already have a few up on amazon.
Some are on pre-order but others seem to already be in stock already. (unbelievable how quick some of these 3rd parties are getting organized these days).
The phone's barely been announced!
Anyways, here are the ones I've found from them:
Their version of the silicone (I think they call theirs a FlexiCase)
https://www.amazon.com/dp/B07D3Y8WPP/&keywords=OnePlus+6+case
Their version of the bumper (they call theirs a Fusion Bumper as it has a clear back so you can see the phone whilst still having the decent protective rim in an actual color)
https://www.amazon.com/dp/B07D4MDMD1/&keywords=OnePlus+6+case
The Wallet Case (this is the type that I normally get, so I can use the built in stand for watching videos on my phone)
https://www.amazon.com/dp/B07D3Y246N/&keywords=OnePlus+6+wallet+case
The Lux Case (this style I've not seen before).. Looks like it does the credit card storage thing, but is more of a leather back than the full wallet. (I kinda never use the credit card storage anyway, so it's like they removed the bit I actually use (ie the stand), but kept the bit I don't use (the credit card bit!) haha. Would probably be useful for carrying rail cards though.
http://www.amazon.com/dp/B07D4P3BGQ/&keywords=OnePlus+6+leather+Case
I normally get my glass screen protectors from them, as they're usually a better fit for the OnePlus phones, but I can't seem to find them yet. But if anybody spots them, let me know.
Like Orzly bumper one. so far looks best solution as I don't see transparent original case yet.
Am Gonna pre-order that case and be happy
Sent from my HTC U11 using Tapatalk
Gramzz said:
@Ph0enix_216
Thank you for your wide useful opinion.
Do somebody know will be spigen neo hybrid for Oneplus 6?
I used this case for note 3 and was great as a protective case.
Saved few times my phone.
I think I will buy original case during buying phone because free shipping is from 100 euro so it's better to buy with phone.
But if spigen will be good I will buy too
Click to expand...
Click to collapse
You might as well go for a OnePlus case if you're grabbing the phone anyway. You can usually get it cheaper I'd you buy it bundled with a screen protector or something, too.
Spigen typically does make cases for OnePlus devices, but if I remember correctly, they took *forever* to release one for the OnePlus 5. I don't remember seeing one for sale until at least six months after the OP5 launched.
I like the looks of nylon case, and expect it to feel great in hand , if I go by reviews. It also offers decent protection and is the most unique OnePlus case this year IMO
ayush000 said:
I like the looks of nylon case, and expect it to feel great in hand , if I go by reviews. It also offers decent protection and is the most unique OnePlus case this year IMO
Click to expand...
Click to collapse
It looks like they actually offer some decent protection this year too — they cover all edges of the phone, whereas previous cases tended to leave the top and bottom edges exposed.
tbalden said:
I'm gonna wait for third parties first. Till then a poach is the way for me.
Click to expand...
Click to collapse
Are you going to bring your HTC kernel skills to the OnePlus 6 ?
SlyUK said:
Are you going to bring your HTC kernel skills to the OnePlus 6 ?
Click to expand...
Click to collapse
Yeah, I plan to widen my support this year to at least two devices with Qualcomm.
HTC u12+ and oneplus 6 are the chosen ones to mess with some kernel stuff as usual
Sent from my HTC U11 using Tapatalk
tbalden said:
Yeah, I plan to widen my support this year to at least two devices with Qualcomm.
HTC u12+ and oneplus 6 are the chosen ones to mess with some kernel stuff as usual
Sent from my HTC U11 using Tapatalk
Click to expand...
Click to collapse
Both very interesting devices. I will either get:
Oneplus 6 or 6T
HTC U12+
Essential Phone 2
It will be interesting. Currently leaning towards Oneplus 6.
Gramzz said:
@Ph0enix_216
Thank you for your wide useful opinion.
Do somebody know will be spigen neo hybrid for Oneplus 6?
I used this case for note 3 and was great as a protective case.
Saved few times my phone.
I think I will buy original case during buying phone because free shipping is from 100 euro so it's better to buy with phone.
But if spigen will be good I will buy too
Click to expand...
Click to collapse
I suspect they will, they've supported most OP devices recently!
ayush000 said:
I like the looks of nylon case, and expect it to feel great in hand , if I go by reviews. It also offers decent protection and is the most unique OnePlus case this year IMO
Click to expand...
Click to collapse
I agree the nylon case is stunning. But don't forget to factor in it is PC+TPU case while the Carbon Fiber is only a TPU case. But because of this, the Nylon case is 58.5% thinker and 28% heavier than the Carbon Fiber one. Now we are talking about millimeters and grams, so they aren't going to be drastically different, but it swayed me.
Nylon. It has a soft touch lining and that rugged shell - also full coverage. Looks nice too.
I got my 6 a day early and also got the nylon case. Very, very cool.
I ordered carbon Bumber Case. I think carbon will be better, more durable material thank nylon one.
In case of drop for example
Bigs1985 said:
I got my 6 a day early and also got the nylon case. Very, very cool.
Click to expand...
Click to collapse
To anybody who got the nylon case, how is it?
Is it really thick and bulky, or do you think it's nice? I don't want something like those old OtterBox cases that everybody had which would turn a phone into a brick haha

Nylon Bumper back in stock!

Hey guys, I got an email from OnePlus this morning (June 6th, 2018) that the Nylon Bumper case is back in stock and ready to ship!
So, finally I bought one!
Funny thing, the moment I ordered it, I received another email from Amazon offering shipping confirmation about my Spigen Rugged Armor case for OP6. I forgot about it! I hope OP6t has the exact body dimensions and camera/fingerprint/flash placement. Fingers crossed.
But I digress, ONEPLUS NYLON BUMPER CASE is back IN STOCK!
www.oneplus.com
Just ordered one myself.
I'm pretty frustrated with OnePlus and their CS. I can purchase a Nylon bumper case just fine by itself. But if I buy the Silk White OP6, and add the Nylon case, when I get to the shipping part, it says the Nylon case is out of stock, and I can't use my $20 off voucher. So I tried buying the case alone with the $20 off voucher, and that isn't possible either, because in order to get the $20 off you need to buy a device. CS told me that the case was actually out of stock 5 hours after it was in stock. The whole experience was/is frustrating.
Love my Nylon Bumper case. I can honestly say that it's the best case I've ever had on a phone. I might even order another one to have a spare.
sn0warmy said:
Love my Nylon Bumper case. I can honestly say that it's the best case I've ever had on a phone. I might even order another one to have a spare.
Click to expand...
Click to collapse
Totally agree. I had my concerns about the durability of the nylon weave back but i'm happy to say that they were unfounded. It is a great case.
ChrisJ said:
Totally agree. I had my concerns about the durability of the nylon weave back but i'm happy to say that they were unfounded. It is a great case.
Click to expand...
Click to collapse
Agree 100% .. i normally go for uag or spigen but the nylon case is excellent.
Bradden1 said:
Agree 100% .. i normally go for uag or spigen but the nylon case is excellent.
Click to expand...
Click to collapse
When I bought my OP6 the nylon case was out of stock. So I had to settle (LOL NEVER SETTLE) for the Karbon Bumper. I got the package with the 3D tempered glass protector, case, & Bullet v2 earbuds (they sound amazing BTW, especially on the V30 DAC).
Later, I pre-ordered the Spigen Rugged Armor case and forgot about it. Then the day the nylon case came back to stock I ordered it.
Currently using the Spigen case and it's incredible!
Hopefully the nylon case comes soon also.
I'm also hoping the 6T has the exact same body & set-up (camera, fingerprint scanner, buttons, etc..) so I can use one of these many cases on it as well.
Side note: ALL versions of the OP6 are in stock as well, again. Which is kinda sad because they never stayed in stock this long before which is why I couldn't get the 5t last year.
Overall, loving my first OnePlus device and am excited for my second (6T).
Sent from my OnePlus 6 using XDA Labs

LG V35 case.

Folks,
After searching for a good and decent LG V35 TPU case I found this case: Araree Air Fit Vivid Slim Flexible Soft Skin Rubber Cover For LG V35 Case. Granted it's a bit pricey but they fit extremely well and made from matte, not glossy TPU. I got both Black and Red colors.
xela19115 said:
Folks,
After searching for a good and decent LG V35 TPU case I found this case: Araree Air Fit Vivid Slim Flexible Soft Skin Rubber Cover For LG V35 Case. Granted it's a bit pricey but they fit extremely well and made from matte, not glossy TPU. I got both Black and Red colors.
Click to expand...
Click to collapse
I'm going to try one. Just ordered a v35. Have a v30 and want to see how the existing cases I have fit too
bacon612 said:
I'm going to try one. Just ordered a v35. Have a v30 and want to see how the existing cases I have fit too
Click to expand...
Click to collapse
The V30 will fit with exception that the cameras on V35 are a bit lower than on V30 so the V35 cameras will not be alligned correctly with a case.
Sent from my LM-V350 using Tapatalk
Cheap Wallet Case
Started with the cheapest possible wallet case for V30 here and asked the seller if he can cut out the camera window 2mm lower.
More than pleased with the final result.
bacon612 said:
I'm going to try one. Just ordered a v35. Have a v30 and want to see how the existing cases I have fit too
Click to expand...
Click to collapse
I have one and I don't really recommend it. The fit is not that tight and it's a bit slippery. I have the Ringke Fusion and maybe not the prettiest but it fits perfectly and the protection is amazing. Have dropped my phone several time and it doesn't have a scratch.
I use the Ringke Fusion as well. It seemed better than a lot of the other ones specifically for the V35 in terms of protection. It's just ok though, I don't feel great about it's durability or look, but the fingerprint/camera cutouts are good.
Ringke Fusion is by far the best case for the v35 phone. Slim, Protective, and stylish.
The best case for the v35, in my opinion, is the TUDIA Merge LG V35 ThinQ Case. It's thin, unobtrusive, and it fits the camera properly.
The best case I've seen for the V35 is the Speck Presidio Grip. They only come in black for the V35 but the fit and feel is great.
Guyinlaca said:
The best case I've seen for the V35 is the Speck Presidio Grip. They only come in black for the V35 but the fit and feel is great.
Click to expand...
Click to collapse
Can you please show pictures of the phone in that case?
Sent from my LM-V350 using Tapatalk
LG V35 cases from Korea.
I just bought 2 clear TPU cases from Korea, from GMarket Global.
I got these 2, http://item2.gmarket.co.kr/English/detailview/item.aspx?goodscode=1487736543 and http://item2.gmarket.co.kr/English/detailview/item.aspx?goodscode=1513004214. Including international shipping from Korea to the US, it cost $20 or about $10 per case. They fit like a glove, including the camera opening that is correctly lined up. Tight fit and before anyone asks, they do not have a "lip" on the front to protect the screen when laying screen down. I bought a cheap tempered glass screen protector for that.
There are other LG V35 cases if you want, but I just wanted a simple clear TPU case.
Custom Leather Case for LG V35
Hello all,
After months of searching, I turned to naver.com to search for a leather case for the V35, hoping that I would have better luck using the Korean search engine. I found a custom shop in Seoul called An's Leather that has them available. Total cost for me with expedited international shipping was $49.11.
I'm too new here to be able to post links, but if you go to naver.com and search for "lg v35 leather case ansleather" you'll get 3 results, all of which show different versions of the case.
He even has 7 colors available and will stamp something in English on it if you tell him when you initially order, I was unfortunately too late in asking.
To order, you have to use KakaoTalk and message username ddajo76. He sent me a link via email to pay via credit card.
I was a little skeptical to order this way, so I waited until I received my case before I posted here. I would compare the quality of this case to be similar to an iPhone leather case.
My Fav case
The Supcase Unicorn Beetle. It's for the V30 but while the cam sits a bit low, its completely serviceable. I bought 3!
Sorry I'm new and can't post a link, but you can find it on amazon and a few other places. $9.99 or less!
It's PC and TPU molded together. Perfect for me!
toptech33 said:
The Supcase Unicorn Beetle. It's for the V30 but while the cam sits a bit low, its completely serviceable. I bought 3!
Sorry I'm new and can't post a link, but you can find it on amazon and a few other places. $9.99 or less!
It's PC and TPU molded together. Perfect for me!
Click to expand...
Click to collapse
Hi can you send a picture how the camera locates?
big choice and free shipping
pay with paypal is possible
https://www.cellphonecases.com/Lg-V35-Thinq.html
I second what oregutan25 said. I really like the TUDIA Merge case for the lg v35. It is made for the v35 only, so everything line up properly. Don't get their other cases, it's not made specifically for the v35. What I really like about the case is that the volume button still functions properly(still have the tactile feedback), so you don't have to press extra hard to adjust the volume. I've really grown to like the dual layer design. TPU (flexible) plastic wraps around the phone and a hard (polycarbonate) plastic covers just the back. I use a magnetic mount in the car, so I just slip the thin piece of metal between the tpu and polycarbonate cover. Keeps the metal piece in place and from scratching the back of the phone. I have yet to drop the phone, but I feel like there is enough of a lip around the front to protect the screen there as well.
https://smile.amazon.com/TUDIA-Extreme-Protection-Rugged-Absorption/dp/B07F3YQNQT/
I have the OtterBox commuter case.other than a co-worker dropping it in the gravel and cracking the screen from a direct hit from a rock. It has survived many falls even on the screen side without any damage.
Sent from my LM-V350 using Tapatalk

The case with a good case.

What case do you use for the P30 Pro?
Of course you want the nice back of the phone to be visible.
But you also want protection.
And a built-in option for a magnetic car mount would be great to.
Show here the covers/cases you have found, tried and love (or hate)
I just ordered the Spigen Neo Hybrid. I have used Spigen cases for the last 2 years and the quality is outstanding.
https://www.amazon.co.uk/dp/B07LCXZ5P5/ref=cm_sw_r_cp_apa_i_5wtNCb6QXW5TN
shem2409 said:
I just ordered the Spigen Neo Hybrid. I have used Spigen cases for the last 2 years and the quality is outstanding.
https://www.amazon.co.uk/dp/B07LCXZ5P5/ref=cm_sw_r_cp_apa_i_5wtNCb6QXW5TN
Click to expand...
Click to collapse
Hi, I too have very good experience with Spigen, as they use thick material in order to protect the lenses on the back side. Never had any problems with their cases on Huawei since my first mate-9 (bought a new one every year, mainly because of the camera and dual-sim ).
Got this one already but havent seen my newly ordered P30pro yet here in Spain:
https://www.amazon.es/gp/product/B07LCXFMT7/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Kurt
qrtnielsen said:
Hi, I too have very good experience with Spigen, as they use thick material in order to protect the lenses on the back side. Never had any problems with their cases on Huawei since my first mate-9 (bought a new one every year, mainly because of the camera and dual-sim ).
Got this one already but havent seen my newly ordered P30pro yet here in Spain:
https://www.amazon.es/gp/product/B07LCXFMT7/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Kurt
Click to expand...
Click to collapse
I always buy Spigen since 5-6 years.
Good this one since Tuesday.
Quite satisfied as usual [emoji6]
Envoyé de mon VOG-L29 en utilisant Tapatalk
This is the one Im thinking on buying. Doesn't cover up the colour, magnetic for phone holders and has. Ring so you don't drop it. Looks good?
https://s.click.aliexpress.com/e/7v5MoFm
Stock Silicon Case from Huawei in route from amazon.co.uk.... it's like the iPhone case made by Apple.... Lint and everything tends to stick to it but your hand does as well plus great overall protection... I'm getting the black phone so putting the black case is no big loss... main reason to "bet on black" and not the other crazy colors then worry about sporting a clear after market case or caseless.
https://www.amazon.co.uk/gp/product/B07PDSWKBS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I ordered this:
https://www.amazon.com/gp/product/B07PRMJHV4/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
https://www.elgiganten.se/product/m...09/huawei-p30-pro-smart-view-flipfodral-svart
shem2409 said:
I just ordered the Spigen Neo Hybrid. I have used Spigen cases for the last 2 years and the quality is outstanding.
https://www.amazon.co.uk/dp/B07LCXZ5P5/ref=cm_sw_r_cp_apa_i_5wtNCb6QXW5TN
Click to expand...
Click to collapse
It looks nice but I ordered a blue phone so don't want to hide it.
I ordered one of the cheapy magnetic glass ones from ebay. Seems well built etc. but waiting for phone to arrive tomorrow before I make a comment on it.
I ended up getting this one.
Olixar for Huawei P30 Pro Bumper Case - Hard Tough Slim Cover - [Clear Panel] Design for P30 Pro (2019) - Shock Protection - Black https://www.amazon.com/dp/B07MNH8FKB
I was going to get one from AliExpress. They looked nice, but we're cheap so probably thin and no protection. Didn't sem right paying a couple bucks for something that is protecting a $1000 phone.
I like this one because you still see the colour and it has good bumper protection if you drop your phone.
I bought the Huawei silicone case, just to have something until I will find a case I really like, and it is standard matte silicone, nice color (I got the blue one), I prefer these matte silicone cases over the glossy plasticky ones, but only as last resort. I paid 15 EUR, which is tiny bit lower than Samsung would charge, which is also nice, but the quality is not as good. Under the power button I can see a thin line where the silicon will slowly tear up, and it has a little bump underneaeth and generally doesn't look and feel very well on the right side.
I just wait for Nilkin air/frosted cases to arrive in my shop, after years of spending money, big money, on cases, I find these cheap Nilkin cases to be the best alternative if there is not a good leather or alcantara OEM alternative. I have both frosted and Air case for my note9, ane the compact size and grip/feel of Frosted cases, and the comfort and design of air cases for 5 damn EUR is unbeatable. I usually also slap a dbrand skin on my phones, don't want to always carry it in a case, but with this huge camera bump on p30p I will likely always have it cased.
I like a case to be not too thick and ruin the shape and feel so until I got my Honor V10 I never used a case but now need one due to risk of child.
Currently I have a semi solid shell and I ordered a similar fro P30P to see how it looks and feels.
I also ordered a couple of different Spiegen cases and one of those open back ones that wraps around the corners.
I'll try them all and return what I don't like.
I don't want to pay €35 for an official Huawei one.
Anyone fancy using skins to cover their P30 Pro? Hit us up.
Spigen for ever! For my latest phone (S9+ and now P30 Pro) I have chosen the Ultra Hybrid Crystal (back in hard plastic and edges in TPU with corners bumpers). With Spigen tempered glass too, the P30 pro is now inside an iron barrel...
Using Spigen Neo Hybrid and i think it is great
Spigen Liquid Crystal Clear
Does anyone know of a GOOD case that can double as a stand?
WM_Rizzo said:
Does anyone know of a GOOD case that can double as a stand?
Click to expand...
Click to collapse
Hi Rizzo!
Take a look at Spigen Slim Armor! It has good protection of the photo lenses and a built in stand. Mine has a number L37CS25934
I have used this for quite many years without any trouble.
Kurt
qrtnielsen said:
Hi Rizzo!
Take a look at Spigen Slim Armor! It has good protection of the photo lenses and a built in stand. Mine has a number L37CS25934
I have used this for quite many years without any trouble.
Kurt
Click to expand...
Click to collapse
Thanks, that looks nice. How does it behave in bus rides?

One Plus Cases for the 8T

My phone arrived on Friday and it is the best oneplus i have had ever had.
Does anyone know if the the protective karbon shell will be releases for the phone (not the bumper) or what about these leather cases? https://www.youtube.com/watch?v=b9_j16OYLEg
https://www.oneplus.com/product/oneplus-8t-karbon-bumper-case
I've been using UAG cases on most of my phones the past few years. This is coming in tomorrow.
https://www.urbanarmorgear.com/products/plasma-series-oneplus-8t-case
Sent from my SM-G781U1 using Tapatalk
Wilazn said:
I've been using UAG cases on most of my phones the past few years. This is coming in tomorrow.
https://www.urbanarmorgear.com/products/plasma-series-oneplus-8t-case
Click to expand...
Click to collapse
Anyone know of a case with a kickstand coming out for the OnePlus 8T? I hope so
The SUPCASE Unicorn Beetle Pros usually have a kickstand on them. I'd keep an eye on those on Amazon. They are pretty good for the price.
Sent from my SM-G781U1 using Tapatalk
acole10000 said:
My phone arrived on Friday and it is the best oneplus i have had ever had.
Does anyone know if the the protective karbon shell will be releases for the phone (not the bumper) or what about these leather cases?
Click to expand...
Click to collapse
I just wish they'd included a case with this phone and not some blinged out water bottle that's apparently worth $100 as a free gift.
This Otterbox case is shipping now www.otterbox.com/en-us/oneplus-8t--5g/symmetry-series-case/77-81166.html
Not sure how these are but dbrand as their skin + grip/case is shipping in November. dbrand.com/shop/special-edition/teardown
excitablewombat said:
I just wish they'd included a case with this phone and not some blinged out water bottle that's apparently worth $100 as a free gift.
Click to expand...
Click to collapse
Got a thread started here to gripe about it.
https://forum.xda-developers.com/oneplus-8t/how-to/mystery-gift-lousy-water-bottle-t4179293
If you are in the US, call your local T-Mobile store and see what cases they have. That is probably the fastest way to get one right now. Most stores seem to have gotten some in. I got the tech21 evo clear but my store had the otterbox and soap bubble.
T-mobile has them listed on their website. Some of these like the tech21 aren't even listed on their own website.
https://www.t-mobile.com/accessory/...-case-for-oneplus-8t-plus-5g?sku=846127199995
https://www.t-mobile.com/accessory/tech21-evo-check-case-for-oneplus-8t-plus-5g?sku=SUPM54238
https://www.t-mobile.com/accessory/tech21-evo-clear-case-for-oneplus-8t-plus-5g?sku=SUPM54237
https://www.t-mobile.com/accessory/...-case-for-oneplus-8t-plus-5g?sku=840104238455
]
I used to work for t-mobile and I tried for the longest time to get in communication with whoever picks the cases we sold in store/online trying to get them to sell uag cases.... I finally was told that uag specifically doesn't want their cases re-sold by 4rd parties and they want only sell direct to keep prices down
All of that to say I like uag even before I knew that. And I will always recommend a uag case
MNoisy said:
https://www.oneplus.com/product/oneplus-8t-karbon-bumper-case
Click to expand...
Click to collapse
$40.00 for a cheap plastic case? Not my $$$$$$ :crying:
jaseman said:
$40.00 for a cheap plastic case? Not my $$$$$$ :crying:
Click to expand...
Click to collapse
My thoughts exactly. I'm waiting for a Spigen Tough armour to be available before I order. I think I paid about £15 for the one for my OP7.
using the 1+ carbon case on silver 1+ 8T
Uag urban armor gear always worth the money everytime
Sent from my OnePlus 8T using XDA Labs
Super-Veloce said:
using the 1+ carbon case on silver 1+ 8T
Click to expand...
Click to collapse
What country are you in/where did you purchase it?
Sent from my [device_name] using XDA-Developers Legacy app
Available today in the OnePlus store in the US. My notification email didn't come, but I checked because the phone was "released" today. Ordered a Karbon bumper
_f0xx said:
Available today in the OnePlus store in the US. My notification email didn't come, but I checked because the phone was "released" today. Ordered a Karbon bumper
Click to expand...
Click to collapse
Great choice, the Karbon Bumper was my best case ever, on my old op6. For my 8T, I ordered the Quantum Case, just because I want something new.
Matrix_19 said:
Great choice, the Karbon Bumper was my best case ever, on my old op6. For my 8T, I ordered the Quantum Case, just because I need want something new.
Click to expand...
Click to collapse
I had a wood grain bumper on my 6T and it did a great job of protecting it without being too grippy in the pocket. Looking forward to a little less anxiety about my phone next week
spart0n said:
I used to work for t-mobile and I tried for the longest time to get in communication with whoever picks the cases we sold in store/online trying to get them to sell uag cases.... I finally was told that uag specifically doesn't want their cases re-sold by 4rd parties and they want only sell direct to keep prices down
All of that to say I like uag even before I knew that. And I will always recommend a uag case
Click to expand...
Click to collapse
I love UAG cases. i have the plasma on my OP8T. only place ive seen selling UAG was Best Buy.
GESMA for Oneplus 8T Case is working good for me.
https://www.amazon.com/gp/product/B08KWCWL29/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Categories

Resources