Help Need!! Stuck at Twamwin page - Huawei MediaPad M5 Guides, News, & Discussion

Hi all, I really need your help....
I flashed the omnirom_20180930_b3.1.img on my Mediapad M5 tonight and was working fine, but then I found out Netflix was not able to install on it so I tried to insall Magisk, but Magisk was't able to install so i tried to install it via TWRP, then i was looking for a way to insall TWRP (as the one suggested here: https://forum.xda-developers.com/mediapad-m5/how-to/huawei-mediapad-m5-twrp-test-t3798349) It seems like this version of TWRP isn't working and it just got stuck.
So later tonight I tried to flash the LineageOS from Openkirin and at the final step when I select factory wipe, it rebooted itself and now it is stuck at the teamwin logo page and I can't select anything.
I even paid 15€ at https://easy-firmware.com/index.php?a=downloads&b=folder&id=32537 to get a official ROM but I just don't know how to flash it or to remove the unwanted TWRP......
Please help, this is a present from my wife and I really want to get it back to work.....please help......please.....
It's a Mediapad M5 8.4 LTE

Try to reinstall EMUI using dload methode ( read here the comments: https://forum.xda-developers.com/mediapad-m5/how-to/bootloader-unlock-guide-t3781275 )

If you need to reflash stock recovery i answered here

Related

How can i install older firmware in mt7-tl10

the phone was soft-bricked (boot-looping in the huawei initial animation), when i failed to instal correctly the update from b326 to b511, the bootloader was locked and the phone wasn't rooted, but i managed to solve both things, then i tried to restore a twrp backup of b511, since that was the version i tried to update to in the begining, after the restore, it was stuck yet again in boot loop but this time it only shows the initial huawei picture, so my cuestion is if there is some way to reinstall an older firmware, say b326, because when i did a backup so i could use the folder to store the files for the b511, the containing carpet name included b326, or if someone has a twrp backup for b326 that could share, it would be really apreciated
cheers
p.s.: i don't know if i should use some sort of rollback or how to use it, so any guidance would be really helpful
p.s.2: fooling around i just did another backup with twrp an it says that it has the b511 version, but i would love to go back to b326
p.s.3: i tried to run diferent stock recoveries and it only runs MM version, even when i flash recovery, boot, cache, cust, system and userdata from b326, it only let me run the MM recovery, aside of TWRP
nevermind, i finally solved it
so, with the b511 backup, you download it and change the s/n in the recovery txt, restore it with twrp and when you're going to reboot it, don't install the suggested SU, just let it run as it is and it will get into MM, then you flash the stock recovery using "recovery mate7 mobopx v2.1 translate by chudy_85" and follow the steps in this thread
http://forum.xda-developers.com/mate-7/development/finally-rollback-513-331-511-326-t3325803

Need help unbricking my Honor 6 L04

So after more or less randomly trying different things, and fearing that I might only have made matters worse, I hope someone can help:
I have got a Huawei Honor 6 H60-L04 (bootloader unlocked and rooted) and was, until two days ago, running KitKat with the B114 build and cwm recovery. Since Marshmallow has officially benn available for the Honor 6 for a while now, I decided to finally update.
I flashed stock recovery and updated to Marshmallow build B820 via update.app on sdcard. Booting worked fine, however I was unrooted (ofc) so I decided to flash SuperSU (2.76 [latest stable]).
So I flashed twrp 3.0.2.0. and so far all good. Still no problems booting. Then I flashed SuperSU (according to twrp successfully) and rebooted, just to find myself stuck on bootscreen. That is not the first one you get in bootloop but the animated honor logo. Well ****.
Since then I tried many things, wiped multiple times (data is unimportant, but unfortunately I don't have a working twrp backup, please don't lecture me on this, i know -.-), flashed almost any stock ROM I could get my hands on. In twrp I get this Error:
Could not find 'META-INF/com/google/android/update-binary' in the zip file". >"Error installing zip file". "Failed"​Somewhere on the way I got
error! Func NO : 9 (FUNC_BOOT_KERNEL) Error NO : 2​while booting, that's gone though.
I'm at the point now where I can install B820 via update.app on sdcard, see the installation progress succeed to 100%, reboot, and again, find myself stuck on animated honor logo.
I honestly have no idea what I can do, I hope someone here does. I'll happily provide any further information you might need.
Try and wipe everything, then reflash TWRP. Good luck ?
Sent from my Samsung Galaxy S7 Red using XDA-Developers mobile app
I did that, I lost count how many times. I wiped everything, clean twrp flash, still get the "meta-inf" error message. Maybe someone can provide me with a clean twrp backup for B820? that might actually work.
Ok, after making a fool of myself, I finally found the culprit. Turns out I have to wait a couple of minutes after a new installation for my phone to boot. And all the time I thought it was soft bricked -.-
However, I does get soft bricked whenever I try to flash SuperSU. Root = bricked. Unroot = unbricked. Anyone got an idea how to get SuperSU to work? I really don't want to go back to unrooted...
I used supersu 2.62 with MM.
After install i update supersu with Google play.
Supersu update itself the binary to 2.76.
It works with B820 ans now with B860.
hagehagen said:
Ok, after making a fool of myself, I finally found the culprit. Turns out I have to wait a couple of minutes after a new installation for my phone to boot. And all the time I thought it was soft bricked -.-
However, I does get soft bricked whenever I try to flash SuperSU. Root = bricked. Unroot = unbricked. Anyone got an idea how to get SuperSU to work? I really don't want to go back to unrooted...
Click to expand...
Click to collapse
Haha, next time give the phone a couple minutes.
Sent from my Samsung Galaxy S7 Red using XDA-Developers mobile app

GEM-702L, want to get rooted marshmallo installed. Screwed something up

I will try to keep it short and concise;
Had android 5.0.1 (if I recall correctly), unlocked it, installed twrp and rooted it.
Then used the local update option to get to marshmallo. Then tried to root again using supersu and it wouldn't boot. Tried restoring nandroid backup of 5.0.1 backup but it wont boot either.
I have searched for many hours and tried many different roms etc. I can only get to the boot animation and it just stays there.
I can get into TWRP and bootloader with no issue but have no idea if I can use the dload option if I can not boot into the OS.
Can someone please help me get this back either to the stock rom or a custom marshmallo rom installed?
I will be honest that I don't fully understand what it means when there is a prerequisite of "You must already be on B201 or higher to flash this" such as with the Simply International I have tried to flash. And am not sure what the EMUI version is or how it affects what can be installed.
Thanks for any info.
Hello
1) First of all, go into TWRP recovery, and do a full wipe. Then reboot and wait.
2) If unsucessfull, try out the downgrade file for 702L : http://download-c.huawei.com/download/downloadCenter?downloadId=81363&version=323452&siteCode=tw . It does install with official dload method
3) If it's not enough, you'll have to use ADB to fix your device I guess:
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378?
its use on X2:
http://forum.xda-developers.com/showthread.php?p=62829551#post62829551
(and following post)
pick up the file from your last installed (or nandroid restored) ROM to use with huawei update extractor.
==
but try out 1 &2, and come back here before using ADB, to have more precise instructions

Reverting to stock [SOLVED]

I have been trying to revert to stock with no luck. What I want to do is install the latest update, but I can't because I had twrp installed. I flashed the original recovery. The problem is when I try to use eRecovery I get "Getting package info failed" error. when I try to download the b385 full update for the FRD-L04 I get a dead link. I was able to download the rollback package, but will I be able to get back to the latest version after I install the rollback package? when I try to use other update packages for my phone I get "Incompatibility with current version" error. Do I need to lock my bootloader in order to update? The good news is that my phone works fine, bad news is that I can't up date.
build number: FRD-L04C567B385
Thanks
this link will help you
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
alimir98 said:
this link will help you
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
Click to expand...
Click to collapse
Thanks for the link, I just been to heck and back with this phone. first I uninstalled Magisk. After that my phone wouldn't boot, it would just hang on the blue screen after the initial boot screen. I tried to find a stock boot Image for my version. Once I installed that my phone would boot loop so I managed to get into fastboot and flash TWRP. Once in TWRP I restored my B360 backup and got my phone working again. Then I flashed the stock recovery. Tried to boot into the stock recovery but that wouldn't load. Some how I got it to install the rollback package and now i'm at version B300. Good news is I'm back to stock and can boot int the stock recovery. Time to see if I can update to the latest version.
Edit I think I might have a problem. It won't let me update also it shows my phone as "FRD-L04C900" not "FRD-L04C567" is there any way I can fix this?
srgrusso said:
Thanks for the link, I just been to heck and back with this phone. first I uninstalled Magisk. After that my phone wouldn't boot, it would just hang on the blue screen after the initial boot screen. I tried to find a stock boot Image for my version. Once I installed that my phone would boot loop so I managed to get into fastboot and flash TWRP. Once in TWRP I restored my B360 backup and got my phone working again. Then I flashed the stock recovery. Tried to boot into the stock recovery but that wouldn't load. Some how I got it to install the rollback package and now i'm at version B300. Good news is I'm back to stock and can boot int the stock recovery. Time to see if I can update to the latest version.
Edit I think I might have a problem. It won't let me update also it shows my phone as "FRD-L04C900" not "FRD-L04C567" is there any way I can fix this?
Click to expand...
Click to collapse
I think you will have to restore you oeminfo partition backup through twrp.
On mr FRD-L09, I had to relock my bootloader, then get the rollback package and put the .app on my SD card and hard flash it, then do the same with the rom .app file. Thet got me back to stock marshamllow, and I just let all the updates run through until I'm now on the latest.
Stock is missing some bits, and has some irritations, but the camera is sooo much better than custom roms, and GPS works, as does Android Pay etc. I've not bothered rooting, AdGuard does the ad-blocking and the rest is liveable.
Well I think I'm my phone is screwed. I can't boot into recovery and when it boots it bootloops once and then it is stuck on the "your device is unlocked and can't be trusted. Fastboot still works fine I can lock and unlock the bootloader. I can flash Recovery and TWRP in Fastboot but neither one will boot. I think I might have flashed the wrong update or it happened when I flashed the rollback package. I want to try DC Phoenix but they won't let me buy credits because my PayPal account is unverified. I have downloaded the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" from the hihonor.com site. I extracted it and flashed the recovery, boot, and system image through fastboot. The phone still won't boot into recovery or boot into the OS. Is there a way to fix this or is it time for a new phone.
Thank you everybody for your help.
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
srgrusso said:
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
Click to expand...
Click to collapse
How did you flash the file you mentioned above? Did you put it on the SD card and used TWRP?
Also, what is so special about that file?
I have the L14 (64gb US version) and just about the same exact problem you describe.
If you have any extra steps that would help me recover mine that would be great.
anosis said:
How did you flash the file you mentioned above? Did you put it on the SD card and used TWRP?
Also, what is so special about that file?
I have the L14 (64gb US version) and just about the same exact problem you describe.
If you have any extra steps that would help me recover mine that would be great.
Click to expand...
Click to collapse
Sorry for replying so late, hopefully you fixed your phone if not here is a link with some more information.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
I followed the instuctions for the honor 7. I would recommend finding the full update firmware for your phone. It took me a lot of googling to find it. Make sure it is the correct firmware, you need to match the numbers before the B-- for me it was (FRD-L04C567) and for you it would be (FRD-L14????) I hope this helps.
hi sir
srgrusso said:
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
Click to expand...
Click to collapse
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
sunneellkumar said:
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
Click to expand...
Click to collapse
After you flash the firmware, you must format data with emui recovery, and it will boot up
After trying different methods, this one works
Download
1 .Honor 8_FRD-L04_Rollback_Package_from_Android7.0 to Android 6.0_C900B300
2. Honor_8_Firmware_FRD-L04_Android_6.0_EMUI-4.1_C567B122_United_States_Nonspecific
Put on dload (sd card) #1 after shutdown the phone and put on the folder dload (Sd card) #2. after reboot your phone starts with android 6.0
Try this
sunneellkumar said:
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
Click to expand...
Click to collapse
Ok so i had the exact problem, im not sure if this will help but what I did was flash my cust recovery system and boot through bootloader, I then put the dload folder on my sdcard with the update.app in it, from there I put my phone into download mode so hold all 3 buttons until it goes into download mode. Once there it will automatically install the update.app, and you should be good to go. If not than go to recovery mode do a factory reset and wipe the cache and see if that works.

Phone stuck in "device is booting now" screen after oreo update

Hi guys,
I tried to update my Bln-l21 from emui 5 (nougat) to emui 8 (oreo) using the guide https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
It worked so I went on to install TWRP from https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079, as suggested in a comment on the guide.
Only then I realized that in order to install Gapps I needed GSM installer, so I downloaded it, but it didn't work because it loaded TWRP instead of the stock erecovery.
I started to panic real bad
I tried reinstalling the firmware using hwota8 (since i had upgraded i figured i had to use that), but it completely destroyed my phone.
Now it wont boot, recovery wont boot and neither erecovery. I can only get it to enter fastboot.
I know, I am a total noob, but PLEASE help me out on this, i'm desperate.
Thank you so much
If you can enter into fastboot, just install twrp, boot into twrp and flash the ROM using HuRUpdater. Use your external storage for the HuRUpdater and the ROM files. The instructions are here: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Before flashing through Hurupdater wipe system Cache Data Internal and Dalvik/ART Cache.
galapagos said:
If you can enter into fastboot, just install twrp, boot into twrp and flash the ROM using HuRUpdater. Use your external storage for the HuRUpdater and the ROM files. The instructions are here: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Thank you for the answer, I was able to boot in TWRP (the one in the original post) and I downloaded Huru, but I'm unsure of which firmware to use. I want to downgrade back to nougat and rebrand back to europe (since the guide in the original post made me change to china).
Thank you again
Just use China and then install a custom ROM
Mannan Qamar said:
Just use China and then install a custom ROM
Click to expand...
Click to collapse
which one should I choose from firmware finder?
Which rom do you recommend?
Bonny96 said:
which one should I choose from firmware finder?
Which rom do you recommend?
Click to expand...
Click to collapse
Just use the original files you used in the first place. The ones you downloaded from the thread. In terms of a custom ROM there is a thread in Custom ROMS section for Pixys OS. Just search stable Pie ROM for Honor 6x and install it. It's very smooth, etc.
This is a EMUI 8 ROM. If you want to go back to EMUI 5 don't use this. This will only restore EMUI 8. After that flash Custom ROM Don't go back to EMUI 5
Mannan Qamar said:
Just use the original files you used in the first place. The ones you downloaded from the thread. In terms of a custom ROM there is a thread in Custom ROMS section for Pixys OS. Just search stable Pie ROM for Honor 6x and install it. It's very smooth, etc.
This is a EMUI 8 ROM. If you want to go back to EMUI 5 don't use this. This will only restore EMUI 8. After that flash Custom ROM Don't go back to EMUI 5
Click to expand...
Click to collapse
Hi, I successfully flashed with Hurupdater and I'm going trough the installation of the pixys rom. The guide says that i need to flash the stock recovery for my device, where can I find it?
Can I pull it from the firmware I used for Huru? If that's the case, how?
Thank you again
I do have instructions over there but cause you asked I will tell.
Extract the Update.zip the large file. In it you will have an Update.app. Now serach for Huawei Update Extractor on XDA and Download it. Run the application and navigate to Update.app. Select it and in settings of Extractor uncheck the first option. Now extract Recovery_Ramdis.img and flash it. Luck.
Mannan Qamar said:
I do have instructions over there but cause you asked I will tell.
Extract the Update.zip the large file. In it you will have an Update.app. Now serach for Huawei Update Extractor on XDA and Download it. Run the application and navigate to Update.app. Select it and in settings of Extractor uncheck the first option. Now extract Recovery_Ramdis.img and flash it. Luck.
Click to expand...
Click to collapse
Thank you so much! Now the phone is working again, I'm only having trouble flashing magisk (it doesn't show up among the apps) but i guess i can live without it for now...
Have you got a paypal or something? I wanna buy you a coffe, it seems the least I can do to repay your kindness and patience!
Bonny96 said:
Thank you so much! Now the phone is working again, I'm only having trouble flashing magisk (it doesn't show up among the apps) but i guess i can live without it for now...
Have you got a paypal or something? I wanna buy you a coffe, it seems the least I can do to repay your kindness and patience!
Click to expand...
Click to collapse
Really there is no need for that. I did what anyone would do. Your thanks is enough.
Can you tell me what version you flashed. What TWRP did you use and what was the message after flashing.Now regarding Magisk, I am gonna assume you flashed the ZIP and the Magisk Manager app didn't show up, correct? To solve that just download Magisk Manager v6.0.1 and install the apk.
If that's not the issue then download any Root Checker app to see if device is rooted. Although I guess you need Magisk Manager to validate Root access. So just install Magisk Manager and let me know what it says. If it says device is unrooted then you probably need to flash Magisk again.
P.S: I don't have a PayPal. Not yet available in my country.
Mannan Qamar said:
Really there is no need for that. I did what anyone would do. Your thanks is enough.
Can you tell me what version you flashed. What TWRP did you use and what was the message after flashing.Now regarding Magisk, I am gonna assume you flashed the ZIP and the Magisk Manager app didn't show up, correct? To solve that just download Magisk Manager v6.0.1 and install the apk.
If that's not the issue then download any Root Checker app to see if device is rooted. Although I guess you need Magisk Manager to validate Root access. So just install Magisk Manager and let me know what it says. If it says device is unrooted then you probably need to flash Magisk again.
P.S: I don't have a PayPal. Not yet available in my country.
Click to expand...
Click to collapse
I really appreciate your kindness,
I flashed the latest version of magisk available from the official thread using the same TWRP from before (king of mezi TWRP from elemental rom thread) and it looked fine... Yes, the app didn't show up, I will try with the manager and I'll let you know.
[edit] I installed the manager and turns out it actually worked the first time and I'm already rooted!
Thank you again, you've been wonderful!
Glad to help.

Categories

Resources