Database Info

HELP - INSTALL TEAMWIN FOR G920P Sprint

my phone unroot, software version: G920PVPU3BOL1 - 5.1.1
i using odin 3.10.6 to flash teamwin.
screen inform fail:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
Help me,pls!!!

I messed up this tablet badly

As the title says i messed up my tablet badly and i know think i have a way to fix it. The only problem being is that odin is not working for me it shows up in odin but when i start it gives me this:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
and stays there and the blue progress bar never shows up on odin or my tablet
PLEASE help you guys are my last hope.

Try download firmware again.
Sent from my SM-N920C using XDA-Developers mobile app

JJEgan said:
Try download firmware again.
Sent from my SM-N920C using
Click to expand...
Click to collapse
I already tried that and upgrading to v3.11

Try Odin v 3.185

JJEgan said:
Try Odin v 3.185
Click to expand...
Click to collapse
it gets stuck at:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
And the blue bar shows up but its shows it full

Odin freezing Galaxy S7 Android 7

Hey guys, i've recently tried to install Android 7 on my Galaxy S7 (SM-G930F) and Odin keeps freezing at the very end, I tried to reset it i've seemed to sponge my phone.
Am I just being impatient? How long should it take to upgrade?
I can't post an image of Odin because this is a new account but here's the logs
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> meta-data/
<ID:0/006> meta-data/fota.zip

cozzw said:
Hey guys, i've recently tried to install Android 7 on my Galaxy S7 (SM-G930F) and Odin keeps freezing at the very end, I tried to reset it i've seemed to sponge my phone.
Am I just being impatient? How long should it take to upgrade?
I can't post an image of Odin because this is a new account but here's the logs
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> meta-data/
<ID:0/006> meta-data/fota.zip
Click to expand...
Click to collapse
Hello,
I will move your thread to relevant section in order to get the correct help.
Thank you!
Regards
Vatsal,
Forum Moderator.

cozzw said:
Hey guys, i've recently tried to install Android 7 on my Galaxy S7 (SM-G930F) and Odin keeps freezing at the very end, I tried to reset it i've seemed to sponge my phone.
Am I just being impatient? How long should it take to upgrade?
I can't post an image of Odin because this is a new account but here's the logs
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> meta-data/
<ID:0/006> meta-data/fota.zip
Click to expand...
Click to collapse
Could be remembering wrong, but I don't recall seeing
<ID:0/006> meta-data/fota.zip
Any time I've flashed using ODIN
Which version of ODIN are you using, and what are you adding to the 4 sections?

Not sure what happened with the fourth sections...
Odin v3.12.4 for you, at least.

S7 SMG930V Bootloop

Hi,
My mom's S7 is in a bootloop of sorts. I have no idea how it happened, but right now when I try to factory reset it from Vol+Up+Power it goes to the splash screen and then to "installing system updates" and after a few seconds stops and turns off.
We don't care about the data, I just want be able to use this device for a trade in. I have downloaded the most recent firmware from Sam Mobile, G930VVRSBCTC1_G930VVZWBCTC1_VZW.
I have downloaded Odin3 v3.13. From here I don't know much, but I tried and succeeded in BL, AP, and CP and odin says success. When it reboots it goes back to updating system and freezes again and shut off. When I try to do CSC it fails.
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5169 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> xbl.elf
<ID:0/006> tz.mbn
<ID:0/006> hyp.mbn
<ID:0/006> devcfg.mbn
<ID:0/006> pmic.elf
<ID:0/006> rpm.mbn
<ID:0/006> cmnlib.mbn
<ID:0/006> keymaster.mbn
<ID:0/006> apdp.mbn
<ID:0/006> msadp.mbn
<ID:0/006> cmnlib64.mbn
<ID:0/006> sec.dat
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> persist.img.ext4
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> adspso.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img.ext4
<ID:0/006> FAIL! (Write)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After searching the forum, I am not sure what all of BL, AP, CP, CSC and Userdata does, but under the impression I need to do them for it to reset my phone?
Thanks.

Okay, so I got it to work. I hadn't installed the Samsung drivers. It was successful, but upon turning on I am now getting "Recovery booting..." in the splash screen and then it goes to the "erasing" screen, stops and turns off.
Any thoughts?

Stuck in Download mode

Dear friends!
I myself use and flash a Xiaomi device, easy peazy. a friend of mine kinda softbricked her S10e Exynos and asked me for help, so I try to fix her issue but I am not succeeding. So I am not the most expierenced with Samsung devices.
She flashed a Lineage rom and corresponding TWRP, OEM is unlocked. Now Download mode opens automatically after bootloader warning. So I thought Odin or heimdall should be a piece of cake. But Odin always ends with failed write process and when I flash a recovery with heimdall I cannot reach recovery mode, it is always D/L mode. Cable is fine, tried every USB port on two Notebooks
Original Firmware is downloaded by SamFirm.
Can anyone give me advise how to go on??
Thanks
Code:
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 8538 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> keystorage.bin
<ID:0/006> uh.bin
<ID:0/006> vbmeta.img
<ID:0/006> boot.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!