Related
Any suggestions? I'm looking for something that can do the quick charging in the car, is that even possible? Can it be done with a dual port so my wife and I can use the quick charger at the same time?
http://www.amazon.com/Charger-PowerIQ-Technology-Samsung-Motorola/dp/B00M43S18Y/ - Would this one support quick charging in the car?
Also,
http://www.amazon.com/Anker®-Extra-Premium-Android-Samsung/dp/B00NPP7TVU
This is basically the same cable that came with my S6 just longer correct? The included cable is too short to plug in near my night stand.
Any charger that is a 2amp charger... and any cable.. i have tried all my old cables on the s6 charger... all allow fast charge... and its charger is 2amp.... same as nexus 7 and all other newer devices... so just go with a 2 amp charger and enjoy the fast charge. And yes they make dual port 2 amp chargers... usually 1 port is 2 amp and second one is like 1 or 1.4amp... i have 2 cheap ones from amazon myself... will test them with the phone tomorrow and update you.
Comando156 said:
Any charger that is a 2amp charger... and any cable.. i have tried all my old cables on the s6 charger... all allow fast charge... and its charger is 2amp.... same as nexus 7 and all other newer devices... so just go with a 2 amp charger and enjoy the fast charge. And yes they make dual port 2 amp chargers... usually 1 port is 2 amp and second one is like 1 or 1.4amp... i have 2 cheap ones from amazon myself... will test them with the phone tomorrow and update you.
Click to expand...
Click to collapse
any cable will work, but not every 2.0A charger will work. i tested it with a 2.0A (not the Samsung one) charger and "fast charging" did not show up in the phone.
AFAIK, you have to use one of Samsung's OEM chargers or one capable of the Quick Charge 2.0 standard for adaptive fast charging.
OP, i only did a cursory search, but i found this dual Quick Charge 2.0 charger that might meet your needs: http://www.amazon.com/dp/B00TGD79X8?psc=1
Interesting, I didn't think to check for QC 2.0. I was thinking the Anker one did that. Thanks!
That being said though, anyone have experience with any of them with how they hold up?
Verizon sells one, it is their generic branding, it's the only one that I have seen or tried that is marketed that it is QC 2.0, works great even has a built in LED flash light basically. Sucks that it is $34.99 though.
http://www.verizonwireless.com/accessories/verizon-vehicle-charger-with-fast-charge-technology-for-micro-usb/
From my understanding Quick Charge 2.0 is a Qualcomm Snapdragon 801 (or newer) processor feature. The Galaxy S6 is running Samsung's Exynos 7420 processor which features Adaptive Fast Charging. I don't know how they vary in terms of performance, but I do know that when I plug in my Quick Charge 2.0, my S6 recognizes it as a fast charger. Battery went from 40% to 63% in 13 mins so I'm assuming both charging standards are compatible lol..
Try this car charger, worked great for my Qualcomm based phones.
http://www.amazon.com/gp/product/B008VMP90A/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
th3b055 said:
From my understanding Quick Charge 2.0 is a Qualcomm Snapdragon 801 (or newer) processor feature. The Galaxy S6 is running Samsung's Exynos 7420 processor which features Adaptive Fast Charging. I don't know how they vary in terms of performance, but I do know that when I plug in my Quick Charge 2.0, my S6 recognizes it as a fast charger. Battery went from 40% to 63% in 13 mins so I'm assuming both charging standards are compatible lol..
Try this car charger, worked great for my Qualcomm based phones.
http://www.amazon.com/gp/product/B008VMP90A/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
i'm reasonably sure it's the same standard. the Note 4 (Snapdragon 805) is listed on Qualcolm's website as compatible with QC 2.0. however, if you look at Samsung's website, it only lists Adaptive Fast Charging. Samsung just rebranded QC 2.0 as their own Adaptive Fast Charging. you can use all devices interchangeably.
also, the OP wanted a dual port QC 2.0 charger. that one only has 1 port w/ QC 2.0
I have already Anker 2 amp car charger in hand and i was thinking it wont be fast enough , i have seen video where quaclom demonstrated that Quick charging is faster than 2 amps charging , and judging by the fact that Samsung is providing comparable charging time with stock charger i was thinking that it is more than 5V 2.0 Amps .. too bad i am waiting for my phone to arrive.
http://www.amazon.ca/gp/product/B00SJU6EIK?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I just purchased this.
I purchased this one from amazon when I had my Note 4 and I can confirm it works great with the S6. http://www.amazon.com/gp/product/B00P9UILUM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
1lazysheep said:
any cable will work, but not every 2.0A charger will work. i tested it with a 2.0A (not the Samsung one) charger and "fast charging" did not show up in the phone.
AFAIK, you have to use one of Samsung's OEM chargers or one capable of the Quick Charge 2.0 standard for adaptive fast charging.
OP, i only did a cursory search, but i found this dual Quick Charge 2.0 charger that might meet your needs: http://www.amazon.com/dp/B00TGD79X8?psc=1
Click to expand...
Click to collapse
Yep. Your right sir. Just tried all my 2.0 / 2.1 amp chargers... not quick charging... guess ill grab some qc 2.0 amp chargers from amazon for car and backups.
alnova1 said:
I purchased this one from amazon when I had my Note 4 and I can confirm it works great with the S6. http://www.amazon.com/gp/product/B00P9UILUM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
This is the one I was looking at, thanks!
Anyone know of a portable battery that fast charges (real fast charging)?
I know of these:
http://www.aukey.com/product/pb-t1-fast-charge-battery-charger (I read that the s6 supports qualcomm 2.0)
http://www.alibaba.com/product-detail/get-through-qualcomm-quick-charger-2_60195548667.html (not really commercially available)
I also would be interested in a powerbank that is compatible with fast charging the S6 / S6 Edge.
And I too came across the Aukey powerbank.
But I didn't find the information if the S6 is compatible with Quick Charge 2.0, as this was developed by Qualcomm.
XQC said:
I also would be interested in a powerbank that is compatible with fast charging the S6 / S6 Edge.
And I too came across the Aukey powerbank.
But I didn't find the information if the S6 is compatible with Quick Charge 2.0, as this was developed by Qualcomm.
Click to expand...
Click to collapse
I purchased both wall and car chargers that were Qualcomm 2.0 quick charge technology compatible and both utilize the quick charge capabilities of the S6 flawlessly.
junksecret said:
I purchased both wall and car chargers that were Qualcomm 2.0 quick charge technology compatible and both utilize the quick charge capabilities of the S6 flawlessly.
Click to expand...
Click to collapse
Cool! Thanks for the confirmation
I purchased the Aukey one you linked over the weekend and should be getting it today. I'll let you know how it is but it advertises that its quick charge 2.0 capable so we'll see.
The Aukey isn't in stock anymore on Amazon. I would have bought it. Thanks, please let us know.
Hey,dear,,,,,,,you are right..choose a good charger is very important.
I bought the Aukey. I only tried it once so far, but it works exactly as advertised. It shows up on the phone as a fast charger. It is a bit heavier than I would like, but I won't be carrying it everywhere, so.
Even with the same cable, recharging the Aukey took a lot longer than charging the phone. I don't know if that's weird or too be expected.
LynnL said:
Even with the same cable, recharging the Aukey took a lot longer than charging the phone. I don't know if that's weird or too be expected.
Click to expand...
Click to collapse
Well the Aukey is 10000mah and the phone is like 1/5 of that so it should take longer to charge.
Tikerz said:
Well the Aukey is 10000mah and the phone is like 1/5 of that so it should take longer to charge.
Click to expand...
Click to collapse
Right, but I'd only used it to recharge the phone once. It was fully charged when I started.
LynnL said:
Right, but I'd only used it to recharge the phone once. It was fully charged when I started.
Click to expand...
Click to collapse
The Aukey is getting charged with maximum 2 Amps on 5V if it the advertising is correct ,, personally i think it is 1.0A on 5V and your phone got charged with quick charge which is faster , also if you take efficiency into consideration , if the Aukey where to deliver 2000 mah to your phone then it will consume at least 2500 mah to do that .
Aukey will be available April 20. I put my order in on amazon.
BTW, you can fast charge the Aukey if you're getting slow charge times.
Have you seen this one?
http://www.ipoweradd.com/poweradd-pilot-s-12000mah-battery-charger-for-samsung-s5-s4_p1270.html
It looks a good option
Just got this bad boy, so far so good, two charging ports, 1 @ 2.1Amps, the other at 1am. The 2.1Amp side charges pretty fast. Not the cheapest but looks like good quality
Comes with a cool case too
http://www.amazon.com/gp/product/B00CKGAE94/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So the Aukey arrived and yes it does fast charge (says so in the pull down).
It's a little heavy and the plastic finish on both sides is slightly scratched (only noticeable) under light, but it seems to be the product to get right now.
Amazon link to Aukey fast charger
Here is the link to Amazon: http://www.amazon.com/Aukey-10000mAh-Portable-External-Supported/dp/B00UBDI7EC
is there any word on release date of the official samsung battery back ?
the actual samsung branded one.
The Aukey is a rip off of the Unu battery chargers. The Unu can fast charge for certain. I've had it for months now and love it.
chnzshyguy said:
Here is the link to Amazon: http://www.amazon.com/Aukey-10000mAh-Portable-External-Supported/dp/B00UBDI7EC
Click to expand...
Click to collapse
Argghhh out of stock.....
Fast charge as in qualcomm 2.0?
Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
tinkko said:
Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
Click to expand...
Click to collapse
Download the supporting charger list from Qualcomm site.
I use the 18w anker qc 3.0 charger from Amazon, along with a 3m nylon anker USB cable, my Max Prime 128gig charges 0-100 in just over 120mins, The anker plug is 9.99gbp and the cable is 6.99gbp
Sent from my MI MAX using Tapatalk
tinkko said:
Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
Click to expand...
Click to collapse
Check this
qualcomm.com/documents/quick-charge-device-list
kyler084 said:
I use the 18w anker qc 3.0 charger from Amazon, along with a 3m nylon anker USB cable, my Max Prime 128gig charges 0-100 in just over 120mins, The anker plug is 9.99gbp and the cable is 6.99gbp
Click to expand...
Click to collapse
I think your charger is more slow than the European stock
---------- Post added at 01:49 AM ---------- Previous post was at 01:48 AM ----------
Preshak said:
Download the supporting charger list from Qualcomm site.
Click to expand...
Click to collapse
I was thinking to buy a tronsmart QC 3.0 quick charger. Maybe u should too
but does 3/32 version support QC?
bonya1423 said:
but does 3/32 version support QC?
Click to expand...
Click to collapse
Yes this version supports 3.0 quick charging
Is there any official QC 3 charger for Mi Max available in india ? or something from other mainstream phone manufacturers that could be used with Mi Max ?
I am using my old Galaxy Note 4 charging brick with the Mi Max cable included in the box and charging speed is great on both official MIUI ROM or Validus ROM, 2360 mAh
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess?
I got Tronsmart and its working great, and it was listed in Qualcomm pdf.
I read about that quick charge 2.0 charges as fast as quick charge 3.0 , the difference is that QC 3.0 allows wider selection of voltages , so the main difference is not speed but compatibility . Does someone using QC 2.0 and what times do you get from 1-2% to 100% ? In my town there is only QC 2.0 on store and i dont want to order online and wait weeks
firkosa said:
I read about that quick charge 2.0 charges as fast as quick charge 3.0 , the difference is that QC 3.0 allows wider selection of voltages , so the main difference is not speed but compatibility . Does someone using QC 2.0 and what times do you get from 1-2% to 100% ? In my town there is only QC 2.0 on store and i dont want to order online and wait weeks
Click to expand...
Click to collapse
I guess not much a difference, I am using Quick Charge 1.0 (Galaxy Note 4 charging brick) and the charging speed is decent. So I guess the difference will be very few minutes that is negligible in real life IMO
https://forum.xda-developers.com/showpost.php?p=70521049&postcount=9
I ordered Anker wall charger 3.0 and 2.0
I'll try it and see what will give me with Ampere app
Yaz S.H. said:
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess
Click to expand...
Click to collapse
are u sure??within 30minute??
StonebridgeGr said:
I was thinking to buy a tronsmart QC 3.0 quick charger. Maybe u should too
Click to expand...
Click to collapse
+1, Using tronsmart QC 3.0 on hydrogen and helium and it works perfectly.
With Tronsmart QC 3.0 : from %30 to %100 in 2hrs and 9min
not like the original charger +heating up+
For me. With the tronsmart w1ct I get 90% with 2 hours charging.. so it's slow
Yaz S.H. said:
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess
Click to expand...
Click to collapse
i dont think that there is a charger out there that can charge Mi Max from 2% to 100% in 25-30 mins ..
---------- Post added at 11:37 PM ---------- Previous post was at 11:36 PM ----------
Sir Mohd said:
With Tronsmart QC 3.0 : from %30 to %100 in 2hrs and 9min
not like the original charger +heating up+
Click to expand...
Click to collapse
for me, with tronsmart wc1t from 2 % to 100% 2 hours and 10 mins :/
My Tronsmart W3PTA charges Mi Max battery from 5% to 50% for 30 minutes
EDIT : Confirmed. This phone support QC 3.0 now.
Come a bit as surprise,
Updated my P20 Pro C636 to .152 Firmware,
And noticed right away that now IT DETECT my QC 3.0 battery pack charger as Fast Charge (Two Thunder Icon Appear) and it charge with High Current,
Someone who already on .152 and have QC 3.0 charger in their belonging might want to test it as well.
But anyway, this is good addition for me. Since now i can have one battery pack to fast charging all my phones.
Bellow i attached the picture
otonieru said:
Come a bit as surprise,
Updated my P20 Pro C636 to .152 Firmware,
And noticed right away that now IT DETECT my QC 3.0 battery pack charger as Fast Charge (Two Thunder Icon Appear) and it charge with High Current,
Someone who already on .152 and have QC 3.0 charger in their belonging might want to test it as well.
But anyway, this is good addition for me. Since now i can have one battery pack to fast charging all my phones.
Bellow i attached the picture
Click to expand...
Click to collapse
I have 70% of battery and it says 1 hour 30 to full the battery capacity
with wall quick charger with usb3 cable type or with original huawei cable
what about you?
xn3m said:
I have 70% of battery and it says 1 hour 30 to full the battery capacity
with wall quick charger with usb3 cable type or with original huawei cable
what about you?
Click to expand...
Click to collapse
By "wall quick charger" is it QC 3.0 ? Or 2.0 or standard fast charger ?
Because this phone wasn't meant to support QC standard to begin with, and supposed only work with Huawei Proprietary Supercharge technology, thats why i quite surprise when it now show it as fast charging when am using my QC 3.0 charger.
How many Thunder icon you see next to the battery when you charge ?
And, are you on .152 as well ?
*double post* crappy connection. and this xda app been slow like, for months
*triple post* *geez* crappy connection. and this xda app been slow like, for months
otonieru said:
By "wall quick charger" is it QC 3.0 ? Or 2.0 or standard fast charger ?
Because this phone wasn't meant to support QC standard to begin with, and supposed only work with Huawei Proprietary Supercharge technology, thats why i quite surprise when it now show it as fast charging when am using my QC 3.0 charger.
How many Thunder icon you see next to the battery when you charge ?
And, are you on .152 as well ?
Click to expand...
Click to collapse
Qc3.0 wall charger
Check my screenshot
I m on. 152
I have two thunder
I did have the save behavior with. 134
xn3m said:
Qc3.0 wall charger
Check my screenshot
I m on. 152
I have two thunder
I did have the save behavior with. 134
Click to expand...
Click to collapse
I see,
i never got .134 on C636
but means it confirm that it works with QC 3.0 charger now, which is a good news for everyone.
less kind of charger to buy. since one will do now.
thx for confirming it
i just checked with voltmeter as well, and it indeed charge on 9V as well
Not to burst the bubble but fast charge through Huawei's own charge gives up to 4.5A, yours only gets 2.5A and that's not fast charge but possible quick charge that Qualcomm uses.
Jake.S said:
Not to burst the bubble but fast charge through Huawei's own charge gives up to 4.5A, yours only gets 2.5A and that's not fast charge but possible quick charge that Qualcomm uses.
Click to expand...
Click to collapse
Yes, that i know. LoL
but prior to this, even using QC 3.0 charger will only give me less than 2A, since it only act as normal fast charging,
so, this might be not doing any miracle,
but at least now i know my QC charger will fast my phone faster than it previously does.
xn3m said:
I have 70% of battery and it says 1 hour 30 to full the battery capacity
with wall quick charger with usb3 cable type or with original huawei cable
what about you?
Click to expand...
Click to collapse
i don't have mine on me, but that doesn't sound right at all. even from a dead phone, i think i'm fully charged in under 2hrs, maybe 90 minutes
bravo261 said:
i don't have mine on me, but that doesn't sound right at all. even from a dead phone, i think i'm fully charged in under 2hrs, maybe 90 minutes
Click to expand...
Click to collapse
That calculation on the screen is innacurate for most of the time. Because it fluctuate often.
And since his battery is on 70 its normal that the charger doesnt supply full current/volt,
That just how it designed.
And you are right,
For most of the case, our phone will be fully charged in around 2 Hrs using supplied charger
Stock Huawei charger includes both supercharged capable adapter, and cable (look for purple ends)
Outputs 2A, 5A, 4.5A
Uhmm that's interesting.
I resumed my old powerbank I used for my old nexus 6p, it's a Tronsmart and it claims to be QC 3.0
Fast charge was working with 6p, I plugged in the p20 pro and I don't get your results.
I'm on c636 152, charge is still normal.
I don't know if the powerbank lies, or the cables, but I tried different ones.
What cable did you use?
mangusZen said:
Uhmm that's interesting.
I resumed my old powerbank I used for my old nexus 6p, it's a Tronsmart and it claims to be QC 3.0
Fast charge was working with 6p, I plugged in the p20 pro and I don't get your results.
I'm on c636 152, charge is still normal.
I don't know if the powerbank lies, or the cables, but I tried different ones.
What cable did you use?
Click to expand...
Click to collapse
QC 3.0 cable or USB PD C to C cable. Both works
I have a QC3. 0 battery bank and it doesn't fast charge my phone.
I'm on 152.
How can I update my p20 pro to the latest version while keeping all my data and stuff?
Once I done this I can confirm this for you guys as I have a current and voltage meter which I can use to confirm that it is indeed charging at QC3.0 speeds.
lambstone said:
How can I update my p20 pro to the latest version while keeping all my data and stuff?
Once I done this I can confirm this for you guys as I have a current and voltage meter which I can use to confirm that it is indeed charging at QC3.0 speeds.
Click to expand...
Click to collapse
yes you keep everything
xn3m said:
yes you keep everything
Click to expand...
Click to collapse
I was actually asking how can I update to this.
I don't get the double charge icon even with the default charger, I don't know where it comes from
lambstone said:
I was actually asking how can I update to this.
Click to expand...
Click to collapse
Go to MangusZen HurUpdater thread. That thread have all info you need.
Do anyone know does nex support Qualcomm quick charge 4?
no it does not, i think it just support up to QC 2.0 since they are using their own charging tech
I'd say it supports QC3, my Nex charges from 5% to 100% in about an hour, maybe 80 minutes tops
thewildwind said:
I'd say it supports QC3, my Nex charges from 5% to 100% in about an hour, maybe 80 minutes tops
Click to expand...
Click to collapse
Which version do you own? I own the global version, stock charger is 5V 2A, I've tried my QC 3.0 charger, but doesn't charge faster.
Valeriuz said:
Which version do you own? I own the global version, stock charger is 5V 2A, I've tried my QC 3.0 charger, but doesn't charge faster.
Click to expand...
Click to collapse
I have the global version too with a QC 3.0 charger. Never actually used the stock charger but the times listed stand.
If you want I can measure them next time I charge
thewildwind said:
I have the global version too with a QC 3.0 charger. Never actually used the stock charger but the times listed stand.
If you want I can measure them next time I charge
Click to expand...
Click to collapse
Yes, please let me know if you discover any differences between stock charger and a QC charger.
people already did it , no matter what quick charge tech, max you can get 9-10w, only with vivo chager can get 20w, doesn't really work with pd or qc4.0