Database Info

[Q] [ODROIDU2] how do i compile rtl8192cu kernel module against 3.0.51?

Hi all, i'm trying to push rtl8192cu.ko to an ODROID U2 running on CM10.2 (latest nightly) wich is based on kernel 3.0.52 in order to get my new wifi mini-dongle working.
i tried several already compiled modules pushing them in /system/lib/modules/ the module, set the right permissions then run: insmod /system/lib/modules/rtl8192cu.ko
but it fails with:
insmod: init_module '/system/lib/modules/rtl8192cu.ko' failed (Exec format error)
i then look at dmesg:
rtl8192cu: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.0.51-g848f8be SMP preempt mod_unload ARMv7 p2v8 '
since i'm still a noob on this, any tip on how to compile this kernel module against the right kernel/arch would be very appreciated
Thanks in advice

same problem but now with wlan.ko
kuzkuz said:
insmod: init_module '/system/lib/modules/rtl8192cu.ko' failed (Exec format error)
rtl8192cu: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.0.51-g848f8be SMP preempt mod_unload ARMv7 p2v8 '
Click to expand...
Click to collapse
Hi dude, first let me say my english is bad, and I'm NOOB
Well, I'm looking a solution for the same problem. In my searching I learn some thing about those errors but I'm not sure I'm still a noob and my english is bad so bad
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I'm not wrong, at that picture above you can see the chip that we (you and me) need fix.
I wasted hours to tried to fix that chip without success. But then at freaktab.com I found a tread that talks about that chip.
My tablet is:
5linx velocity Ver. 2 (US) but also named at china as Youzen Q8. (yeap I gues the original manufacturer is from china)
Android 4.1.1
kernel 3.0.8+
API LVL 16
CPU: rk3066 but not sure if is called armeabi-v7a or ARMv7
WiFi chip: Realtek 903 or if we follow DMESG is called RTL8188cu
------ So what I'm trying to say with that info ----
1. failed (Exec format error) <<< I guess is when you don't have all the permissions, or is bad copied, or bad compiled. (remember I'm still a noob).
2. version magic -------- ' should be ------ <<< I guess, is when you tried run a module that is not compiled for that version of cpu or kernel.
I have the same problem when I tried copy and run a different module ko that I downloaded or copied from other tablet.
Well, 5linx (US) does not support its customers, but the Chinese manufacturer Szuzone (youzen) does.
So, at freaktab.com I found that maybe the developers made a mistake. Someone there said, try to do this:
rename
8192cu.ko to rkwifi.ko
then run the module using insmod rkwifi.ko
ok, I tried that, but now I get another error with wlan.ko module.
wlan: Unknown symbol rockchip_wifi_init_module (err 0)
-- Some guys on freaktab.com say that process worked for them but not for me.
-- But now I noted that wlan.ko is detected when I use lsmod or dmesg. (remember, I executed rkwifi.ko)
So, what that means?
That process worked for me too? and now wlan.ko is bad?
----- Well anyway, dude try to do that, maybe work for you.
-- Another thing, at realtek website can be found the source code of that chip under (unix,linux) and is for Android 1.6~2.3 and 4.0~4.2 but I have no idea how to compile that driver, I just know I need android sdk or something like that.
-- If someone know how to compile the driver I guess would be better us, right?
I guess the things we need to check before copy and run a module is:
Module was compiled for the same OS version.
same Kernel version
same CPU
and same Wi-Fi chip.
If someone find something to me please feel free to tell me.

WarSxNes said:
Hi dude, first let me say my english is bad, and I'm NOOB
Well, I'm looking a solution for the same problem. In my searching I learn some thing about those errors but I'm not sure I'm still a noob and my english is bad so bad
If I'm not wrong, at that picture above you can see the chip that we (you and me) need fix.
I wasted hours to tried to fix that chip without success. But then at freaktab.com I found a tread that talks about that chip.
My tablet is:
5linx velocity Ver. 2 (US) but also named at china as Youzen Q8. (yeap I gues the original manufacturer is from china)
Android 4.1.1
kernel 3.0.8+
API LVL 16
CPU: rk3066 but not sure if is called armeabi-v7a or ARMv7
WiFi chip: Realtek 903 or if we follow DMESG is called RTL8188cu
------ So what I'm trying to say with that info ----
1. failed (Exec format error) <<< I guess is when you don't have all the permissions, or is bad copied, or bad compiled. (remember I'm still a noob).
2. version magic -------- ' should be ------ <<< I guess, is when you tried run a module that is not compiled for that version of cpu or kernel.
I have the same problem when I tried copy and run a different module ko that I downloaded or copied from other tablet.
Well, 5linx (US) does not support its customers, but the Chinese manufacturer Szuzone (youzen) does.
So, at freaktab.com I found that maybe the developers made a mistake. Someone there said, try to do this:
rename
8192cu.ko to rkwifi.ko
then run the module using insmod rkwifi.ko
ok, I tried that, but now I get another error with wlan.ko module.
wlan: Unknown symbol rockchip_wifi_init_module (err 0)
-- Some guys on freaktab.com say that process worked for them but not for me.
-- But now I noted that wlan.ko is detected when I use lsmod or dmesg. (remember, I executed rkwifi.ko)
So, what that means?
That process worked for me too? and now wlan.ko is bad?
----- Well anyway, dude try to do that, maybe work for you.
-- Another thing, at realtek website can be found the source code of that chip under (unix,linux) and is for Android 1.6~2.3 and 4.0~4.2 but I have no idea how to compile that driver, I just know I need android sdk or something like that.
-- If someone know how to compile the driver I guess would be better us, right?
I guess the things we need to check before copy and run a module is:
Module was compiled for the same OS version.
same Kernel version
same CPU
and same Wi-Fi chip.
If someone find something to me please feel free to tell me.
Click to expand...
Click to collapse
Hi, thanks for the response. I actually know that i did it wrong since i need to compile the drivers for the right kernel version. The problem is that i have no idea on how to compile only the kernel module mentioned instead of all the kernel (wich actually goes beyond my knowledge)

[ROM] Lenovo IdeaTab A1000L-F Model:60041 unbrick stock [4.1.2]

A friend ask me to flash his bricked Lenovo A1000L-F and I spend 3 hours until figure out the right way, so I share the method with you.
This table was completed bricked, so the instructions to revive it are these:
Lenovo IdeaTab A1000L-F Model: 60041
0. Connect tablet to PC.
1. Install drivers "MTK65xx_Driver" or install "PdaNetA4150.exe"
2. Uncompress the file "A100LF_A412_01_05_130705_USER.rar"
3. Delete the dile "CheckSum.ini" inside the uncrompressed folder.
4. Open "SP Flash Tool v5" -> "flashtool.exe".
5. Go to "Download" tab and load the scatter file "MT6577_Android_scatter_emmc.txt".
6. Press "Download" button.
7. Go to the table and find the reset hidden button beside the sd card slot, press it.
8. Wait for the process and done.
In case you have the "PMT wrong address" error, you need format the flash before download the firmware:
4.1 Go to "Format" tab, select "Format whole flash" and press "Start".
4.2 Go to the table and find the reset hidden button beside the sd card slot, press it.
4.3 Wait for the process and continue with the step 5.
Link to download the firmware:
https://mega.co.nz
/#F!C1BCkI6a!BxUYCN-ODRzkg_V8bX9SEw
The build.prop of this firmware:
Code:
# begin build properties
ro.build.id=JZO54K
ro.build.display.id=A1000LF_A412_01_05_130705
ro.custom.build.version=1373033494
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jul 5 22:12:27 CST 2013
ro.build.date.utc=1373033547
ro.build.type=user
ro.build.user=
ro.build.host=scmbuild
ro.build.tags=release-keys
ro.product.model=IdeaTabA1000L-F
ro.product.brand=Lenovo
ro.product.name=IdeaTab_A1000L-F
ro.product.device=A1000LF
ro.product.board=IdeaTab_A1000L-F
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LENOVO
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
ro.build.product=huaqin17_td_tb_jb
ro.build.description=huaqin17_td_tb_jb-user LenovoIdeaTab_A1000L-F A1000LF_A412_01_05_130705 release-keys
ro.build.fingerprint=Lenovo/IdeaTab_A1000L-F/A1000LF:4.1.2/JZO54K/A1000LF_A412_01_05_130705:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
Original source:
Code:
https://forums.lenovo.com/t5/Tablets-IdeaPad-A-S-y-K-Android/Rom-Stock-Lenovo-A1000-F-L-Recuperala-del-bootloop/td-p/1418041/page/7
http://forum.xda-developers.com/showthread.php?t=2372088

heldigard said:
A friend ask me to flash his bricked Lenovo A1000L-F and I spend 3 hours until figure out the right way, so I share the method with you.
This table was completed bricked, so the instructions to revive it are these:
Lenovo IdeaTab A1000L-F Model: 60041
0. Connect tablet to PC.
1. Install drivers "MTK65xx_Driver" or install "PdaNetA4150.exe"
2. Uncompress the file "A100LF_A412_01_05_130705_USER.rar"
3. Delete the dile "CheckSum.ini" inside the uncrompressed folder.
4. Open "SP Flash Tool v5" -> "flashtool.exe".
5. Go to "Download" tab and load the scatter file "MT6577_Android_scatter_emmc.txt".
6. Press "Download" button.
7. Go to the table and find the reset hidden button beside the sd card slot, press it.
8. Wait for the process and done.
In case you have the "PMT wrong address" error, you need format the flash before download the firmware:
4.1 Go to "Format" tab, select "Format whole flash" and press "Start".
4.2 Go to the table and find the reset hidden button beside the sd card slot, press it.
4.3 Wait for the process and continue with the step 5.
Link to download the firmware:
https://mega.co.nz
/#F!C1BCkI6a!BxUYCN-ODRzkg_V8bX9SEw
The build.prop of this firmware:
Code:
# begin build properties
ro.build.id=JZO54K
ro.build.display.id=A1000LF_A412_01_05_130705
ro.custom.build.version=1373033494
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jul 5 22:12:27 CST 2013
ro.build.date.utc=1373033547
ro.build.type=user
ro.build.user=
ro.build.host=scmbuild
ro.build.tags=release-keys
ro.product.model=IdeaTabA1000L-F
ro.product.brand=Lenovo
ro.product.name=IdeaTab_A1000L-F
ro.product.device=A1000LF
ro.product.board=IdeaTab_A1000L-F
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LENOVO
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
ro.build.product=huaqin17_td_tb_jb
ro.build.description=huaqin17_td_tb_jb-user LenovoIdeaTab_A1000L-F A1000LF_A412_01_05_130705 release-keys
ro.build.fingerprint=Lenovo/IdeaTab_A1000L-F/A1000LF:4.1.2/JZO54K/A1000LF_A412_01_05_130705:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
Original source:
Code:
https://forums.lenovo.com/t5/Tablets-IdeaPad-A-S-y-K-Android/Rom-Stock-Lenovo-A1000-F-L-Recuperala-del-bootloop/td-p/1418041/page/7
http://forum.xda-developers.com/showthread.php?t=2372088
Click to expand...
Click to collapse
Okay you really didn't specify what to do with the tablet. Is there a particular mode to load it in?

Thanks,
I saved my bricked tablet with your solution! Thank You!
---------- Post added at 05:53 AM ---------- Previous post was at 05:18 AM ----------
jonahly said:
Okay you really didn't specify what to do with the tablet. Is there a particular mode to load it in?
Click to expand...
Click to collapse
---> "find the reset hidden button beside the sd card slot, press it"

I flash my phone.now vibration only no on.please help me. model:a1000l-f

Really glad to have found easy instructions for saving my daughter's A1000L-F. However, this ROM version does not have the updated 1.5GB instead of 512MB internal storage. Does anybody have the 1.5GB ROM image?

I'm also searching the 1,5GB version...Does anybody have the updated image?

A100LF_A412_01_05_130705_USER.rar
help please, how do i download A100LF_A412_01_05_130705_USER.rar? tnx

Thanks!

Спасибо брат! выручил!

bluethut problom
cheksum eroor nd i well delet the file and flashedcheksum eroor...a tab its dont show blututh ..a

I am getting error when flashing... Anyone ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thx
thank you sir. my Tab back to life with your solution.

unlock.mk said:
I am getting error when flashing... Anyone ?
Hi!
Did you delete the file "CheckSum.ini" inside the uncrompressed folder?
Click to expand...
Click to collapse

Help Please!
I managed to flash my Tab with this solution but now it just vibrates and then nothing!!
It does not turn on!!
Please help!!

Procedure is 100% working
Thanks for detailed manual. Solution is 100% working!

Your the man!!!
I finally fixed my bricked A1000L-F thanx to you I actually thought it was to consider as trash before youre description saved it :victory:
I see someone ask for a rom with 1,5GB internal storage instead of this 503KB (and 5,72GB USB storage) I actually got 2 of this A1000L-F`s and the other one got 3GB internal storage and 3GB USB storage. (it was that way stock) wish there was a custom rom out there with all the internal flash as internal storage, instead of have them as two different storage units hence internal storage and usb storage, like there are in most tabs/phones. I really hope there will come some custom roms to this Lenovo A1000F-L, because i think it got a lot of potential consider the very low price, but with irritating issues with storage of large apps/games. I would really preciate any advise of any such roms, and i will report here if i find anything interesting myself

got mine working
...but cant update? how to update if system update shows that current is latest but still having low memory?

http://pan.baidu.com/share/link?shareid=68935606&uk=2335146322 i was searching for stock firmware to a1000l-f and found this! Could this be for real or will my tablet explode if i flash it
---------- Post added at 03:28 PM ---------- Previous post was at 02:28 PM ----------
and it was a real deal. Even system updates can be done and internal memory is what its supposed to be =) i dont know if this is wrong place to talk about this but a1000lf doesnt have much other places to be talked about.

BallStone said:
i was searching for stock firmware to a1000l-f and found this! Could this be for real or will my tablet explode if i flash it
---------- Post added at 03:28 PM ---------- Previous post was at 02:28 PM ----------
and it was a real deal. Even system updates can be done and internal memory is what its supposed to be =) i dont know if this is wrong place to talk about this but a1000lf doesnt have much other places to be talked about.
Click to expand...
Click to collapse
Thanks, its working! I flashed this rom, and now i have 3-3 GBytes partitions, and i have hungarian language too i searched this rom image for months....
After the flashing i got 6 system updates
Thank you very much!

download link
Can someone please share the ROM download links again?

I9505XXUHOA7 Odin files Multilang. . + Guide for ROOT . Works 100 % (EUR)

THIS IS ONLY FOR I9505​
Downloads
Mod Edit links removed ( see HERE )
https://mega.co.nz/#!O8QEGCqC!vu7Op5QTNEWd27FJLHs-nYd0G8V9QDSkQEZxMcYuCWU
GDrive Password : samsung-firmware.net
Direct Download thx to @HITMAN-CREED
Sourcecode I9505XXUHOA7 thx @LastStandingDroid for info:good:
Big thx to @edanielss and @Repulsa for his link all works ..
Questions & answer
http://forum.xda-developers.com/showthread.php?t=3044008
InstallGuide
How to install Android 5.0.1 Lollipop I9505XXUHOA7 on Galaxy S4 LTE (I9505)
Step-1: Extract the downloaded firmware zip using any extracting tool
Step-2: Extract the Odin zip to get Odin3 v.3.09.exe with a few other files
Step-3: Power off the Galaxy S4
Step-4: Enter into Download Mode by pressing and holding Home, Power and Volume Down buttons together
Note: Ensure that you have installed proper USB drivers installed on your PC.
Step-5: Launch Odin as Administrator on the computer. Click on the Odin tool then right-click and select Run as Administrator from the drop down menu
Step-6: Connect the S4 to the PC using the USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with COM port number. This step might take some time
Step-7: In Odin select the firmware files extracted in step-1 in an orderly manner ( its not importent to select the pit, only if u wanna repartition ur System )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step-8: Enable Auto Reboot and F.Reset Time checkboxes in Odin. Also, Re-Partition checkbox should be ticked
Step-9: Double check everything and click the Start button in Odin
Step-10: The installation should start now. It will take a few minutes to complete the installation. Once the process is completed, the phone will restart automatically. When you see the home screen on the phone, unplug the USB cable from the phone safely
You can now enjoy the I9505XXUHOA7 stock Lollipop build on your Galaxy S4 LTE.
Flash a Recovery after first boot ( TWRP or. CWM )
XDA Download twrp
Flash ROOT in recovery for root
full root guide
ADDONS
10 apps from Galaxy S6 and S6 Edge thx to @Albe95
New kernel http://forum.xda-developers.com/showthread.php?p=58698864
5 Way Reboot Menu thx to @v00d007
Bugs...: no Bugs - no reboots
Patch to give rights to write on Sdcard - thx to @edzamber
Important
Ok so reflashed the files with re-partition actually ticked in odin this time and wifi is working, so the pit file and re-partition is a must for working wifi . ( thx to @kingears )
if u wan't to revert back to KK don't flash the Bootloader ( thx to @LastStandingDroid )
DO NOT REMOVE CABLE UNTIL U SEE PASS ON ODIN ( thx to @leap_ahead )
This rom is pure stock with stock recovery. Its multilang
http://forum.xda-developers.com/showthread.php?p=59190129
edanielss said:
source: http://forum.android.com.pl/f842/odin-niemiecki-i9505-android-5-0-1-lrx22c-i9505xxuhoa7-dbt-507342/
Click to expand...
Click to collapse
Build.prop
ro.build.id=LRX22C
ro.build.display.id=LRX22C.I9505XXUHOA7
ro.build.version.incremental=I9505XXUHOA7
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.1
ro.build.date=Thu Jan 29 03:42:06 KST 2015
ro.build.date.utc=1422470526
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6212
ro.build.tags=release-keys
ro.product.model=GT-I9505
ro.product.brand=samsung
ro.product.name=jfltexx
ro.product.device=jflte
ro.product.board=MSM8960
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=jfltexx-user 5.0.1 LRX22C I9505XXUHOA7 release-keys
ro.build.fingerprint=samsung/jfltexx/jflte:5.0.1/LRX22C/I9505XXUHOA7:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I9505XXUHOA7
ro.build.hidden_ver=I9505XXUHOA7
ro.build.changelist=3996895
ro.product_ship=true
ro.chipname=apq8064
persist.sys.storage_preload=1

I've been googling for "i9505 lollipop" and "i9505xxuhoa7" for 1 month and a half. my girlfriend got exhausted )
and finally this morning that linked popped and looked legit. I'm mirroring it on mega as we speak. 12% and loading. considering that I'm from Romania it will be done pretty fast

Awesome, Superb Work...

So this is stock
?
I mean no custom recovery no root?

"We can't find what you're looking for."

stock. flash via odin.
LE: mega upload 40%. stay tuned!

tecksulfur said:
"We can't find what you're looking for."
Click to expand...
Click to collapse
Here you go Lollipop MEGA Mirror I9505XXUHOA7_OXAHOA7.zip 1.50 GB Have a nice day
edit: Credit goes to czubulus on Another forum and @edanielss for finding it

Repulsa said:
Here you go Lollipop MEGA Mirror I9505XXUHOA7_OXAHOA7.zip 1.50 GB Have a nice day
Click to expand...
Click to collapse
Thank you sir! You too!

flatzki said:
https://www.dropbox.com/s/sbjxx2i1dh...pture.PNG?dl=0
Big thx to @edanielss for his link all works ..
Flash via Odin + PIT !!!!
Mirrors
Uploading
Click to expand...
Click to collapse
all im getting is dropbox 404 error

panda968 said:
all im getting is dropbox 404 error
Click to expand...
Click to collapse
Will this work on m919? I mean T-Mobile s4

flatzki said:
https://www.dropbox.com/s/sbjxx2i1dh...pture.PNG?dl=0
Big thx to @edanielss for his link all works ..
Flash via Odin + PIT !!!!
Mirrors
Uploading
Click to expand...
Click to collapse
update OP with Repulsa mirror and add this mirror also: https://mega.co.nz/#!Nt50EDoI!D83ogIG_neuDYpo_0c2srZ5oAz-c7YGt-gxuh9wesZA
thanks!

this will help the other guys who need the kernel.
have they found out away how to root lollipop yet only so i can use viper4android

I understood that CF-Root works well. haven't tried yet.
Can someone confirm?

Will this work on m919?
I really want to know if this will work on T-Mobile s4. I am downloading it now. Please, help me find out...

Pls u can post explain how to flash because i never flash stock with odin .only on recovery ..thanks guys !
No need to wipe ?
What must checked on odin?

Not sure if I'm correct but I don't think this should be flashed by other carriers besides the german one

Is this pure stock??
Did anyone flashed this and can confirm that this is working??

flashed. pure stock. working 100%

This has stock Kernel? Exciting... thanks for sharing @edanielss

from what i can see, everything is stock.
you're welcome!

help me with M4 /M4 ??

Hello;
my sister left me this smartphone to see if it has a solution, had 20 viruses and Trojans, remove them with CM security but the phone no longer turn on the menu, enter download mode and recovery (only in Chinese), I need a compatible ROM with this mobile, you can help me? excuse my English, thanks
the photos were taken when the cell is infected and you could access the menu / beginning of it, now will not start in normal mode
I can not upload photos
Info:
Mediatek MT6572
cores 2
architecture 2xARM cortex A7 @ 1,20
Model M4 (M4)
manufacturer M4
brand xiao mi
board yuanda72_cwet_kk
Hardware mt6572
screen size 4,08 "
Android version 4.4.2
API level 19
bootloader unknown
Build ID M4 EB 20150319. 112002
Java VM Dalvik 1.6.0
OpenGL ES 2.0
Kernel architecture armv7l
kernel version 3.4.67 (eng.root. 1426735050)

kaileena_ said:
Hello;
my sister left me this smartphone to see if it has a solution, had 20 viruses and Trojans, remove them with CM security but the phone no longer turn on the menu, enter download mode and recovery (only in Chinese), I need a compatible ROM with this mobile, you can help me? excuse my English, thanks
the photos were taken when the cell is infected and you could access the menu / beginning of it, now will not start in normal mode
I can not upload photos
Info:
Mediatek MT6572
cores 2
architecture 2xARM cortex A7 @ 1,20
Model M4 (M4)
manufacturer M4
brand xiao mi
board yuanda72_cwet_kk
Hardware mt6572
screen size 4,08 "
Android version 4.4.2
API level 19
bootloader unknown
Build ID M4 EB 20150319. 112002
Java VM Dalvik 1.6.0
OpenGL ES 2.0
Kernel architecture armv7l
kernel version 3.4.67 (eng.root. 1426735050)
Click to expand...
Click to collapse
If the phone was not rooted then a Data Factory reset from the recovery would fix the phone.
If it was rooted, still try to factory reset, if it doesn't work try to reflash the stock from.

janekmuric said:
If the phone was not rooted then a Data Factory reset from the recovery would fix the phone.
If it was rooted, still try to factory reset, if it doesn't work try to reflash the stock from.
Click to expand...
Click to collapse
hello, the recovery does not work, can not enter the menu, where I get the stock rom this smartphone? the recovery is all in Chinese, do not understand anything, I hope you can help me ..

kaileena_ said:
hello, the recovery does not work, can not enter the menu, where I get the stock rom this smartphone? the recovery is all in Chinese, do not understand anything, I hope you can help me ..
Click to expand...
Click to collapse
This is the method for Xiaomi Mi 4. If that is not your phone DO NOT USE THIS METHOD and post your full phone model here.
Fastboot fixing method for Xiaomi Mi 4:
STEP 1:
Download the ROM flashing tools and the full ROM pack, unzip after downloading is completed.
Download ROM Flashing Tools
Download latest fastboot developer version for Mi 4
(Please check if the file suffix is '.tgz'. Please rename it to '.tgz' if the suffix is '.gz')
Turn off the phone, press and hold the Volume down key and the Power button at the same time to enter Fastboot mode, then connect the phone to a computer.
The screen should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 2:
Double click on the zip file after downloading is completed to decompile it. Open the folder of the ROM pack, and copy its address on the computer.
STEP 3:
Decompile and install the ROM flashing tools after downloading is completed (if there’s a security prompt, please select Allow).Open MiFlash.exe and paste the address copied in the last step into the address bar. Click on the first button to Refresh, and MiFlash will automatically recognize the phone. Then click the second button to flash.
STEP 4:
Wait until the progress bar on MiFlash is green, which means the ROM is successfully flashed, and the phone will automatically boot.
Source: here

that ROM applies to this smartphone? I think it's a fake xiaomi, if it is, why do you put me so detailed, thank you
sorry for my bad english

I think this is not a smartphone XIAOMI then as I do? Thank you

please help me :crying:

i hope see
http://subefotos.com/ver/?b1f952486f629744a05c6b37525c2a76o.jpg
http://subefotos.com/ver/?e48ad69b9b3d2d85cb8320462b3d253ao.jpg
http://subefotos.com/ver/?3d07b143b402b3c51a1f7c815d4f4a24o.jpg

help me please...

Question A22 5G A226G Bricked, Can Brom/Bypass. Can't find correct firmware

I messed it up, I'm sure I flashed sp tool with just preloader All format + download by accident.
Now can't recover, I can bypass auth and connect on Brom and flash but mainly arrive at role back error or not signed etc.
I've done filter on com / mtk driver etc.
Authentication bypass all goes fine.
All firmwares I see are for A226B etc but no A226G, I've tried to flash many FW without much success. I'm not sure what I'm doing anymore and my head hurts (I was pretty new to this a week ago).
I'm sure it was on Android 11 with 3 network but not sure if EU or not etc.
I see something about binary version or patch etc, is there a way I can read what's on there at the minute and find a way to paste that here for someone to help with without much hassle for them?
I know I'm close, just need a path to follow.
Thank you so much

There is only 3 model available. A226B BR and L. There is No A226G. Don't know maybe you someone sale you Fake Vietnamese mobile.

Otherwise Download A226B Firmware but Android 13 otherwise you will get rollback error.

I've check my IMEI and found I was mistaken, you were correct (A226B)
My Product is SM-A226BZAUEUA

Please help me find correct firmware to flash, what would help me point to correct file? Thank you

Model Info: MOBILE SM-A226B GRAY EUA
Search Term: (I removed)
IMEI 1: (I removed)
Serial Number: (I removed)
Model Desc: Samsung Galaxy A22 5G
Model Name: SM-A226B
Model Number: SM-A226BZAUEUA
Warranty Status: Warranty Active
Estimated Warranty End Date: 16-03-
2024
Production location: Korea SEC
Production Date: 16-03-2022
Country: United Kingdom
Carrier: Factory Unlocked
+++++++++++++++++++++
I can provide imei and serial if it can help.
I have opened phone up and in test brom now, that's where I'm stuck.

Decmanager said:
Model Info: MOBILE SM-A226B GRAY EUA
Search Term: (I removed)
IMEI 1: (I removed)
Serial Number: (I removed)
Model Desc: Samsung Galaxy A22 5G
Model Name: SM-A226B
Model Number: SM-A226BZAUEUA
Warranty Status: Warranty Active
Estimated Warranty End Date: 16-03-
2024
Production location: Korea SEC
Production Date: 16-03-2022
Country: United Kingdom
Carrier: Factory Unlocked
+++++++++++++++++++++
I can provide imei and serial if it can help.
I have opened phone up and in test brom now, that's where I'm stuck.
Click to expand...
Click to collapse
You can use this tutorial to create scatter firmware for your device
How to create MTK scatter firmware for Samsung A12F using CSC file!
Create MTK Scatter Firmware Samsung A12F using odin firmware! This firmware can be used to flash the device using SP Flash Tool in BROM mode. Requirements: 1. CSC file from the Odin Firmware 2. MTK Auth Bypass Tool (Credits: Mofadal...
forum.xda-developers.com
or else follow the steps below or let me know if you want me to create a scatter firmware for your device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I've tried, doesn't work for me. Which firmware am I supposed to extract, the one originally on my phone or the latest? I've tried many and have no luck. I get "status sec imghdr type mismatch" on most other than "anti role back"

Decmanager said:
I've tried, doesn't work for me. Which firmware am I supposed to extract, the one originally on my phone or the latest? I've tried many and have no luck. I get "status sec imghdr type mismatch" on most other than "anti role back"
Click to expand...
Click to collapse
Give me some time I will help you out with firmware.

mvikrant97 said:
Give me some time I will help you out with firmware.
Click to expand...
Click to collapse
I've tried various FM and I get
"status sec imghdr type mismatch"
What is that normally? It's frustrating, I feel like it's something simple. I've tried different SP tools, different ways to extract firmware like Android utilities and auth tool v30 etc to arrive at the same error.

Do
Decmanager said:
Model Info: MOBILE SM-A226B GRAY EUA
Search Term: (I removed)
IMEI 1: (I removed)
Serial Number: (I removed)
Model Desc: Samsung Galaxy A22 5G
Model Name: SM-A226B
Model Number: SM-A226BZAUEUA
Warranty Status: Warranty Active
Estimated Warranty End Date: 16-03-
2024
Production location: Korea SEC
Production Date: 16-03-2022
Country: United Kingdom
Carrier: Factory Unlocked
+++++++++++++++++++++
I can provide imei and serial if it can help.
I have opened phone up and in test brom now, that's where I'm stuck.
Click to expand...
Click to collapse
Download the firmware and see if it works.
3.7 GB file on MEGA
mega.nz
We will then try to flash using paid software Unlock Tool.
Don't worry I won't charge anything.

mvikrant97 said:
Do
Download the firmware and see if it works.
3.7 GB file on MEGA
mega.nz
We will then try to flash using paid software Unlock Tool.
Don't worry I won't charge anything.
Click to expand...
Click to collapse
I'm on it right now

Same as the firmwares I've tried, same error.

Screenshot of error

Does connect fine

Decmanager said:
Does connect fine
Click to expand...
Click to collapse
Use this software download tool
Transsion_Software_Download_v5.1912.05.17.zip - Android Data Host
You are about to download the Transsion_Software_Download_v5.1912.05.17.zip file on your computer. The file comes as a zip package, and the file size is approximately 39.98 MB only. ADH Editorial Staff uploaded this file from Spain on 03/06/2020. The registered Editorial Staff uploaded this file...
androiddatahost.com
TO generate checksum for your firmware use checksum generator
CheckSum Generator v7.1536.00
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

Transsion tool come up with this error, I also just tried another version which also gave the same outcome.
Are you saying that I need to try other MTK download tools?
What is my ultimate goal

I found version SWDv4.1901.23.17 opens correctly, I'll try generate a .ini now

Not working for me, I get this error:
checksum dochecksum fail: unknown target bbchip
I've put about 40 hours into this (I don't mind doing more, I learn lots)

Boot and enter 2nd DA...
Boot 2nd Da done! Getting Ram Info
● Sram 448.00KB
● Dram 4.00GB
Boot and enter 2nd SEC DA...
===== Power On HACC =====
Boot 2nd SEC DA done! Getting HW Info
● Storage eMMC
● BOOT1 4.00MB
● BOOT2 4.00MB
● RPMB 16.00MB
● GP1 00000000
● GP2 00000000
● GP3 00000000
● GP4 00000000
● USR 58.24GB
● MLC 00000001
● SLC 00000001
● EOL 00000001
● LCYCLE 00000000
● CID 13014E47314A395238101B685D0A29D1
● MFRID 0x13
● Vendor Micron
● Card BGA BGA (Discrete embedded)
● OEMID 0x4e
● Product G1J9R8
● Revision 1.0
● Card SN 0x1b685d0a
Doing some more investigating on where I went wrong, I noticed a product read out in Android Utilities:
This product points to a Samsung A12?
● Product G1J9R8
Possibly why I'm getting errors.....