I9505XXUHOA7 Odin files Multilang. . + Guide for ROOT . Works 100 % (EUR) - Galaxy S 4 General

THIS IS ONLY FOR I9505​
Downloads
Mod Edit links removed ( see HERE )
https://mega.co.nz/#!O8QEGCqC!vu7Op5QTNEWd27FJLHs-nYd0G8V9QDSkQEZxMcYuCWU
GDrive Password : samsung-firmware.net
Direct Download thx to @HITMAN-CREED
Sourcecode I9505XXUHOA7 thx @LastStandingDroid for info:good:
Big thx to @edanielss and @Repulsa for his link all works ..
Questions & answer
http://forum.xda-developers.com/showthread.php?t=3044008
InstallGuide
How to install Android 5.0.1 Lollipop I9505XXUHOA7 on Galaxy S4 LTE (I9505)
Step-1: Extract the downloaded firmware zip using any extracting tool
Step-2: Extract the Odin zip to get Odin3 v.3.09.exe with a few other files
Step-3: Power off the Galaxy S4
Step-4: Enter into Download Mode by pressing and holding Home, Power and Volume Down buttons together
Note: Ensure that you have installed proper USB drivers installed on your PC.
Step-5: Launch Odin as Administrator on the computer. Click on the Odin tool then right-click and select Run as Administrator from the drop down menu
Step-6: Connect the S4 to the PC using the USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with COM port number. This step might take some time
Step-7: In Odin select the firmware files extracted in step-1 in an orderly manner ( its not importent to select the pit, only if u wanna repartition ur System )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step-8: Enable Auto Reboot and F.Reset Time checkboxes in Odin. Also, Re-Partition checkbox should be ticked
Step-9: Double check everything and click the Start button in Odin
Step-10: The installation should start now. It will take a few minutes to complete the installation. Once the process is completed, the phone will restart automatically. When you see the home screen on the phone, unplug the USB cable from the phone safely
You can now enjoy the I9505XXUHOA7 stock Lollipop build on your Galaxy S4 LTE.
Flash a Recovery after first boot ( TWRP or. CWM )
XDA Download twrp
Flash ROOT in recovery for root
full root guide
ADDONS
10 apps from Galaxy S6 and S6 Edge thx to @Albe95
New kernel http://forum.xda-developers.com/showthread.php?p=58698864
5 Way Reboot Menu thx to @v00d007
Bugs...: no Bugs - no reboots
Patch to give rights to write on Sdcard - thx to @edzamber
Important
Ok so reflashed the files with re-partition actually ticked in odin this time and wifi is working, so the pit file and re-partition is a must for working wifi . ( thx to @kingears )
if u wan't to revert back to KK don't flash the Bootloader ( thx to @LastStandingDroid )
DO NOT REMOVE CABLE UNTIL U SEE PASS ON ODIN ( thx to @leap_ahead )
This rom is pure stock with stock recovery. Its multilang
http://forum.xda-developers.com/showthread.php?p=59190129
edanielss said:
source: http://forum.android.com.pl/f842/odin-niemiecki-i9505-android-5-0-1-lrx22c-i9505xxuhoa7-dbt-507342/
Click to expand...
Click to collapse
Build.prop
ro.build.id=LRX22C
ro.build.display.id=LRX22C.I9505XXUHOA7
ro.build.version.incremental=I9505XXUHOA7
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.1
ro.build.date=Thu Jan 29 03:42:06 KST 2015
ro.build.date.utc=1422470526
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6212
ro.build.tags=release-keys
ro.product.model=GT-I9505
ro.product.brand=samsung
ro.product.name=jfltexx
ro.product.device=jflte
ro.product.board=MSM8960
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=jfltexx-user 5.0.1 LRX22C I9505XXUHOA7 release-keys
ro.build.fingerprint=samsung/jfltexx/jflte:5.0.1/LRX22C/I9505XXUHOA7:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I9505XXUHOA7
ro.build.hidden_ver=I9505XXUHOA7
ro.build.changelist=3996895
ro.product_ship=true
ro.chipname=apq8064
persist.sys.storage_preload=1

I've been googling for "i9505 lollipop" and "i9505xxuhoa7" for 1 month and a half. my girlfriend got exhausted )
and finally this morning that linked popped and looked legit. I'm mirroring it on mega as we speak. 12% and loading. considering that I'm from Romania it will be done pretty fast

Awesome, Superb Work...

So this is stock
?
I mean no custom recovery no root?

"We can't find what you're looking for."

stock. flash via odin.
LE: mega upload 40%. stay tuned!

tecksulfur said:
"We can't find what you're looking for."
Click to expand...
Click to collapse
Here you go Lollipop MEGA Mirror I9505XXUHOA7_OXAHOA7.zip 1.50 GB Have a nice day
edit: Credit goes to czubulus on Another forum and @edanielss for finding it

Repulsa said:
Here you go Lollipop MEGA Mirror I9505XXUHOA7_OXAHOA7.zip 1.50 GB Have a nice day
Click to expand...
Click to collapse
Thank you sir! You too!

flatzki said:
https://www.dropbox.com/s/sbjxx2i1dh...pture.PNG?dl=0
Big thx to @edanielss for his link all works ..
Flash via Odin + PIT !!!!
Mirrors
Uploading
Click to expand...
Click to collapse
all im getting is dropbox 404 error

panda968 said:
all im getting is dropbox 404 error
Click to expand...
Click to collapse
Will this work on m919? I mean T-Mobile s4

flatzki said:
https://www.dropbox.com/s/sbjxx2i1dh...pture.PNG?dl=0
Big thx to @edanielss for his link all works ..
Flash via Odin + PIT !!!!
Mirrors
Uploading
Click to expand...
Click to collapse
update OP with Repulsa mirror and add this mirror also: https://mega.co.nz/#!Nt50EDoI!D83ogIG_neuDYpo_0c2srZ5oAz-c7YGt-gxuh9wesZA
thanks!

this will help the other guys who need the kernel.
have they found out away how to root lollipop yet only so i can use viper4android

I understood that CF-Root works well. haven't tried yet.
Can someone confirm?

Will this work on m919?
I really want to know if this will work on T-Mobile s4. I am downloading it now. Please, help me find out...

Pls u can post explain how to flash because i never flash stock with odin .only on recovery ..thanks guys !
No need to wipe ?
What must checked on odin?

Not sure if I'm correct but I don't think this should be flashed by other carriers besides the german one

Is this pure stock??
Did anyone flashed this and can confirm that this is working??

flashed. pure stock. working 100%

This has stock Kernel? Exciting... thanks for sharing @edanielss

from what i can see, everything is stock.
you're welcome!

Related

[ROM] Stock Firmwares - bootloader removed - 100% SAFE TO FLASH

SAMSUNG GALAXY FIT STOCK ROMS WITHOUT BOOTLOADER (NO HARD BRICK RISK)
WARNING: THESE ROMS ARE FOR GINGERBREAD USERS ONLY. FOR FROYO USERS, UPGRADE FIRST TO GINGERBREAD BY FOLLOWING THIS LINK HERE (thanks yagya)
I would like to thank them first.
fkrone for giving me the inspiration to make one for our device and for guiding me along the way.
kyrillos13 for starting this all on samsung galaxy 3.
parasmi, godell, dhlalit11 for telling me what to and what not to.
yagya for helping me repack the rom and many stuffs.
The following ROMs are tested and are working. I just removed the bootloader (arm11boot). Unsuccessful flash of bootloader will hard brick the phone. So if we flash a ROM without bootloader, the chances of hard bricking the phone is 0%. You can only soft brick your phone, and a simple reflash will fix this.
Europe Firmwares
S5670XWKTI => Download [Android 2.3, March 2012, One Package]
S5670XWKT2 => Download [Android 2.3, November 2011, One Package]
S5670XXKPQ => Download [Android 2.3, November 2011, One Package]
S5670XXKPP => Download [Android 2.3, October 2011, One Package]
S5670XXKPI => Download [Android 2.3, June 2011, One Package]
password => annson08
Asian Firmware
S5670DXKT7 => Download [Android 2.3, March 2012, One Package]
S5670DDKT3 => Download [Android 2.3, February 2012, One Package]
S5670DXKT4 => Download [Android 2.3, December 2011, One Package]
S5670DDKQ5 => Download [Android 2.3, September 2011, One Package]
password => annson08
Flashing Tools
Odin => Download [Odin + beni.ops]
Driver => Download [SAMSUNG_USB]
UPDATE: XXKPP now available. Enjoy!
Are you kidding bro
How to flash the ROMs.
NOTICE: The Images are from Galaxy Mini tut, sorry for that.
You will need:
-a WINDOWS XP,VISTA,SEVEN machine
-NET COMPACT FRAMEWORK 2.0
-USB CABLE AND THE S5570 ,doh!
Procedures:
1) Download all files on the flashing tools located on the first post. (extract flashing tools)
2) Install SAMSUNG_USB (skip this step if you have installed KIES)
3) Download the firmware you desire from the first post and extract it anywhere you want.
4) For a successful flash, be sure to charge your phone to 70% or more.
5) Turn off your phone and enter download mode. (press vol.down + Home button + power button while the phone is off)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6) Now enter ODIN on your computer.
7) Load the OPS file that you have just downloaded by clicking OPS on Odin and select BENI_v1.0.ops
8) Check the boxes from the Option section. (One Package, Auto Reboot, Protect OPS)
9) Load the ROM you've downloaded by clicking One Package and select the ROM.
10) Connect the USB cable,now in Odin at COM PORT MAPPING is should appeare the USB cable as connected(COM1,COM2 etc)
11) Click Start and wait 5-6mins. It must say above the COM connection PASS on a blue backgroud to disconnect the USB cable and u are done.
NOTE: If bootloops occurs, just wipe data.
1.) Go to recovery mode.
2.) Select "wipe data/factory reset" just below the encircled selection.
Happy Flashing.
How to Root your phone. (Gingerbread only)
Working on latest release.
Thanks to StoneBoyTony for his tut. See his thread HERE.
You will need:
-a computer.
-a USB cable.
Procedures:
1.) Download Universal_gb_root_v11.zip
2.) Place it anywhere in your memory card.
3.) Go to recovery mode.
4.) Select "apply update from sdcard" and choose universal_gb_root_v11.zip
5.) Reboot system and you're done.
6.) Enjoy.
How unRoot your phone.
Back first up all your important data (calendar, contacts etc.)
Procedures:
1.) Download universal_gb_unroot.zip
2.) Place it anywhere in your memory card.
3.) Go to recovery mode.
4.) Do a factory reset by choosing "wipe data/factory reset".
5.) Select "apply update from sdcard" and choose universal_gb_unroot.zip
6.) Reboot system and you're done.
7.) Enjoy.
Will and the bootloader for S5670XWKTI be removed?
galaxyfitankit said:
Are you kidding bro
Click to expand...
Click to collapse
what? why?
ZmisiS said:
Will and the bootloader for S5670XWKTI be removed?
Click to expand...
Click to collapse
Okay I'll include it. Post me a link of the firmware so I can modify it.
Wow, its nice to see a fellow pinoy posting here! n_n Awesssoomme!
and now for le noob question...what does..no bootloader mean? Ano po yun?
Jhayzt said:
Wow, its nice to see a fellow pinoy posting here! n_n Awesssoomme!
and now for le noob question...what does..no bootloader mean? Ano po yun?
Click to expand...
Click to collapse
haha. Bootloader is the download mode of our device.
Unsuccessful flash of bootloader will hard brick the phone. So if we flash a ROM without bootloader, the chances of hard bricking the phone is 0%. You can only soft brick your phone, and a simple reflash will fix this.
Nakalagay yan s taas dre
annson08 said:
haha. Bootloader is the download mode of our device.
Unsuccessful flash of bootloader will hard brick the phone. So if we flash a ROM without bootloader, the chances of hard bricking the phone is 0%. You can only soft brick your phone, and a simple reflash will fix this.
Nakalagay yan s taas dre
Click to expand...
Click to collapse
How Can We Flash Official Roms Without Having Bootloader or download mode..?
syed_zafar94 said:
How Can We Flash Official Roms Without Having Bootloader or download mode..?
Click to expand...
Click to collapse
No, you got it all wrong, These firmwares I modify doesn't have bootloaders to flash, therefore the old bootloader partition in our device will remain safe and untouched. Basically it's just like flashing custom ROMs, it doesn't mess with other partitions specifically the bootloader partition.
Add DDKT3 and XXKPU Pls
DQiB said:
Add DDKT3 and XXKPU Pls
Click to expand...
Click to collapse
S5670XWKTI is for Germani. This is the latest ROM.
DXKT7 and XWKTI are the latest
DQiB said:
Add DDKT3 and XXKPU Pls
Click to expand...
Click to collapse
Okay guys, I'll add whatever you want as long as you post me a link to where I can download it so I can modify it immediately. I can't at this moment though 'coz it's 2am here in the Philippines and I need my rest. good morning everyone.
annson08 said:
Okay guys, I'll add whatever you want as long as you post me a link to where I can download it so I can modify it immediately. I can't at this moment though 'coz it's 2am here in the Philippines and I need my rest. good morning everyone.
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/
Just write in the search engine listed ROMs.
---------- Post added at 08:06 PM ---------- Previous post was at 08:04 PM ----------
Syfer_Fever said:
DXKT7 and XWKTI are the latest
Click to expand...
Click to collapse
DXKT7 is for Indonesia. DQiB is from Germani.
DDKT3 now available, uploading DXKT7, working on XWKTI.
ZmisiS said:
http://www.sammobile.com/firmware/
Just write in the search engine listed ROMs.
---------- Post added at 08:06 PM ---------- Previous post was at 08:04 PM ----------
DXKT7 is for Indonesia. DQiB is from Germani.
Click to expand...
Click to collapse
i know that
Syfer_Fever said:
i know that
Click to expand...
Click to collapse
OK.
DXKT7 & XWKTI Now available, Enjoy.
I'm sorry. On the S5670XWKTI I can not install one theme that I like. Theme can be installed only on S5670XWKT2.

[FACTORY STOCK] I337UCUAMF3 GS4 Stock Firmware Package-SOFT BRICK RESTORE

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This only works on At&T Model SGH-I337
Did you brick your phone trying to install a custom recovery like twrp and your phone had the I337UCUAMF3 build?
Do you just want to restore your phone to stock?
Then this thread is for you!:laugh:
This will help you restore your phone to stock and will also remove root,
this is only for phones that are ruing the I337UCUAMF3 build, if you have
the I337ATTAMDB build DON'T USE THIS TO RESTORE YOUR PHONE,
instead go to AdamOutler's thread that will help you do the same on I337ATTAMDB.
Code:
To find your phone's build number:
Go to settings/more/about device
READ EVERYTHING BEFORE YOU START!
Step One
Download Odin Flashing tool http://forum.xda-developers.com/atta...1&d=1341114315
For windows pc only
Download the necessary .tar firmware packages(ABOUT 1.4GB):
Link #1
link #2
link #3
Step Two
Extract the downloaded .rar file ( I recommend 7zip)
Code:
After extraction you will have a folder named JellyBean
and 4 tar files in this folder
Put the phone in download mode and attach to computer(give it a minute to install driver)
Code:
Hold Volume Down + Home + Power until your device enters Download
(Odin) Mode, then press volume up
Run the Odin tool and attach each tar file
Code:
-BOOTLOADER_I337... to Bootloader
-PLATFORM_I337.. to PDA
-MODEM_I337... to PHONE
-CSC_AT&T... to CSC
Press Start and that's it
GOOD LUCK HOPE THIS HELPS SOMEONE
-->credit to the original discussion thread http://forum.xda-developers.com/showthread.php?t=2504311
Additional information is available here: http://forum.xda-developers.com/showthread.php?t=2502003
This is what I am looking for ...
I did it yesterday and it's very work for me
and now I can update my phone to 4.4.2
Thanks again :good:
Gracias!!! Thank You!!!
isidromxz said:
This only works on At&T Model SGH-I337
Did you brick your phone trying to install a custom recovery like twrp and your phone had the I337UCUAMF3 build?
Do you just want to restore your phone to stock?
Then this thread is for you!:laugh:
This will help you restore your phone to stock and will also remove root,
this is only for phones that are ruing the I337UCUAMF3 build, if you have
the I337ATTAMDB build DON'T USE THIS TO RESTORE YOUR PHONE,
instead go to AdamOutler's thread that will help you do the same on I337ATTAMDB.
Code:
To find your phone's build number:
Go to settings/more/about device
READ EVERYTHING BEFORE YOU START!
Step One
Download Odin Flashing tool http://forum.xda-developers.com/atta...1&d=1341114315
For windows pc only
Download the necessary .tar firmware packages(ABOUT 1.4GB):
Link #1
link #2
link #3
Step Two
Extract the downloaded .rar file ( I recommend 7zip)
Code:
After extraction you will have a folder named JellyBean
and 4 tar files in this folder
Put the phone in download mode and attach to computer(give it a minute to install driver)
Code:
Hold Volume Down + Home + Power until your device enters Download
(Odin) Mode, then press volume up
Run the Odin tool and attach each tar file
Code:
-BOOTLOADER_I337... to Bootloader
-PLATFORM_I337.. to PDA
-MODEM_I337... to PHONE
-CSC_AT&T... to CSC
Press Start and that's it
GOOD LUCK HOPE THIS HELPS SOMEONE
-->credit to the original discussion thread http://forum.xda-developers.com/showthread.php?t=2504311
Click to expand...
Click to collapse
Really so happy I have my phone like new
You are great, Thank you again... friend.:laugh:
Thank you so much
isidromxz said:
This only works on At&T Model SGH-I337
Did you brick your phone trying to install a custom recovery like twrp and your phone had the I337UCUAMF3 build?
Do you just want to restore your phone to stock?
Then this thread is for you!:laugh:
This will help you restore your phone to stock and will also remove root,
this is only for phones that are ruing the I337UCUAMF3 build, if you have
the I337ATTAMDB build DON'T USE THIS TO RESTORE YOUR PHONE,
instead go to AdamOutler's thread that will help you do the same on I337ATTAMDB.
Code:
To find your phone's build number:
Go to settings/more/about device
READ EVERYTHING BEFORE YOU START!
Step One
Download Odin Flashing tool http://forum.xda-developers.com/atta...1&d=1341114315
For windows pc only
Download the necessary .tar firmware packages(ABOUT 1.4GB):
Link #1
link #2
link #3
Step Two
Extract the downloaded .rar file ( I recommend 7zip)
Code:
After extraction you will have a folder named JellyBean
and 4 tar files in this folder
Put the phone in download mode and attach to computer(give it a minute to install driver)
Code:
Hold Volume Down + Home + Power until your device enters Download
(Odin) Mode, then press volume up
Run the Odin tool and attach each tar file
Code:
-BOOTLOADER_I337... to Bootloader
-PLATFORM_I337.. to PDA
-MODEM_I337... to PHONE
-CSC_AT&T... to CSC
Press Start and that's it
GOOD LUCK HOPE THIS HELPS SOMEONE
-->credit to the original discussion thread http://forum.xda-developers.com/showthread.php?t=2504311
Click to expand...
Click to collapse
i did it. thank you. but how come i have no sound. is their any solution?
You are great, Thank you again... friend.:laugh:[/QUOTE]
Man.. i think you are my unique solution for my (now) useless phone.. but the link with the files are broken or something.. do you think you could do me the favor of upload the files again? please?
:crying:
says file not found
shawon2015 said:
says file not found
Click to expand...
Click to collapse
The post is 2 years old and it is for MF3. If you have problems, start a new thread. There might be other solutions.

[ROM] Lenovo IdeaTab A1000L-F Model:60041 unbrick stock [4.1.2]

A friend ask me to flash his bricked Lenovo A1000L-F and I spend 3 hours until figure out the right way, so I share the method with you.
This table was completed bricked, so the instructions to revive it are these:
Lenovo IdeaTab A1000L-F Model: 60041
0. Connect tablet to PC.
1. Install drivers "MTK65xx_Driver" or install "PdaNetA4150.exe"
2. Uncompress the file "A100LF_A412_01_05_130705_USER.rar"
3. Delete the dile "CheckSum.ini" inside the uncrompressed folder.
4. Open "SP Flash Tool v5" -> "flashtool.exe".
5. Go to "Download" tab and load the scatter file "MT6577_Android_scatter_emmc.txt".
6. Press "Download" button.
7. Go to the table and find the reset hidden button beside the sd card slot, press it.
8. Wait for the process and done.
In case you have the "PMT wrong address" error, you need format the flash before download the firmware:
4.1 Go to "Format" tab, select "Format whole flash" and press "Start".
4.2 Go to the table and find the reset hidden button beside the sd card slot, press it.
4.3 Wait for the process and continue with the step 5.
Link to download the firmware:
https://mega.co.nz
/#F!C1BCkI6a!BxUYCN-ODRzkg_V8bX9SEw
The build.prop of this firmware:
Code:
# begin build properties
ro.build.id=JZO54K
ro.build.display.id=A1000LF_A412_01_05_130705
ro.custom.build.version=1373033494
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jul 5 22:12:27 CST 2013
ro.build.date.utc=1373033547
ro.build.type=user
ro.build.user=
ro.build.host=scmbuild
ro.build.tags=release-keys
ro.product.model=IdeaTabA1000L-F
ro.product.brand=Lenovo
ro.product.name=IdeaTab_A1000L-F
ro.product.device=A1000LF
ro.product.board=IdeaTab_A1000L-F
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LENOVO
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
ro.build.product=huaqin17_td_tb_jb
ro.build.description=huaqin17_td_tb_jb-user LenovoIdeaTab_A1000L-F A1000LF_A412_01_05_130705 release-keys
ro.build.fingerprint=Lenovo/IdeaTab_A1000L-F/A1000LF:4.1.2/JZO54K/A1000LF_A412_01_05_130705:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
Original source:
Code:
https://forums.lenovo.com/t5/Tablets-IdeaPad-A-S-y-K-Android/Rom-Stock-Lenovo-A1000-F-L-Recuperala-del-bootloop/td-p/1418041/page/7
http://forum.xda-developers.com/showthread.php?t=2372088
heldigard said:
A friend ask me to flash his bricked Lenovo A1000L-F and I spend 3 hours until figure out the right way, so I share the method with you.
This table was completed bricked, so the instructions to revive it are these:
Lenovo IdeaTab A1000L-F Model: 60041
0. Connect tablet to PC.
1. Install drivers "MTK65xx_Driver" or install "PdaNetA4150.exe"
2. Uncompress the file "A100LF_A412_01_05_130705_USER.rar"
3. Delete the dile "CheckSum.ini" inside the uncrompressed folder.
4. Open "SP Flash Tool v5" -> "flashtool.exe".
5. Go to "Download" tab and load the scatter file "MT6577_Android_scatter_emmc.txt".
6. Press "Download" button.
7. Go to the table and find the reset hidden button beside the sd card slot, press it.
8. Wait for the process and done.
In case you have the "PMT wrong address" error, you need format the flash before download the firmware:
4.1 Go to "Format" tab, select "Format whole flash" and press "Start".
4.2 Go to the table and find the reset hidden button beside the sd card slot, press it.
4.3 Wait for the process and continue with the step 5.
Link to download the firmware:
https://mega.co.nz
/#F!C1BCkI6a!BxUYCN-ODRzkg_V8bX9SEw
The build.prop of this firmware:
Code:
# begin build properties
ro.build.id=JZO54K
ro.build.display.id=A1000LF_A412_01_05_130705
ro.custom.build.version=1373033494
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jul 5 22:12:27 CST 2013
ro.build.date.utc=1373033547
ro.build.type=user
ro.build.user=
ro.build.host=scmbuild
ro.build.tags=release-keys
ro.product.model=IdeaTabA1000L-F
ro.product.brand=Lenovo
ro.product.name=IdeaTab_A1000L-F
ro.product.device=A1000LF
ro.product.board=IdeaTab_A1000L-F
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LENOVO
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
ro.build.product=huaqin17_td_tb_jb
ro.build.description=huaqin17_td_tb_jb-user LenovoIdeaTab_A1000L-F A1000LF_A412_01_05_130705 release-keys
ro.build.fingerprint=Lenovo/IdeaTab_A1000L-F/A1000LF:4.1.2/JZO54K/A1000LF_A412_01_05_130705:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
Original source:
Code:
https://forums.lenovo.com/t5/Tablets-IdeaPad-A-S-y-K-Android/Rom-Stock-Lenovo-A1000-F-L-Recuperala-del-bootloop/td-p/1418041/page/7
http://forum.xda-developers.com/showthread.php?t=2372088
Click to expand...
Click to collapse
Okay you really didn't specify what to do with the tablet. Is there a particular mode to load it in?
Thanks,
I saved my bricked tablet with your solution! Thank You!
---------- Post added at 05:53 AM ---------- Previous post was at 05:18 AM ----------
jonahly said:
Okay you really didn't specify what to do with the tablet. Is there a particular mode to load it in?
Click to expand...
Click to collapse
---> "find the reset hidden button beside the sd card slot, press it"
I flash my phone.now vibration only no on.please help me. model:a1000l-f
Really glad to have found easy instructions for saving my daughter's A1000L-F. However, this ROM version does not have the updated 1.5GB instead of 512MB internal storage. Does anybody have the 1.5GB ROM image?
I'm also searching the 1,5GB version...Does anybody have the updated image?
A100LF_A412_01_05_130705_USER.rar
help please, how do i download A100LF_A412_01_05_130705_USER.rar? tnx
Thanks!
Спасибо брат! выручил!
bluethut problom
cheksum eroor nd i well delet the file and flashedcheksum eroor...a tab its dont show blututh ..a
I am getting error when flashing... Anyone ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thx
thank you sir. my Tab back to life with your solution.
unlock.mk said:
I am getting error when flashing... Anyone ?
Hi!
Did you delete the file "CheckSum.ini" inside the uncrompressed folder?
Click to expand...
Click to collapse
Help Please!
I managed to flash my Tab with this solution but now it just vibrates and then nothing!!
It does not turn on!!
Please help!!
Procedure is 100% working
Thanks for detailed manual. Solution is 100% working!
Your the man!!!
I finally fixed my bricked A1000L-F thanx to you I actually thought it was to consider as trash before youre description saved it :victory:
I see someone ask for a rom with 1,5GB internal storage instead of this 503KB (and 5,72GB USB storage) I actually got 2 of this A1000L-F`s and the other one got 3GB internal storage and 3GB USB storage. (it was that way stock) wish there was a custom rom out there with all the internal flash as internal storage, instead of have them as two different storage units hence internal storage and usb storage, like there are in most tabs/phones. I really hope there will come some custom roms to this Lenovo A1000F-L, because i think it got a lot of potential consider the very low price, but with irritating issues with storage of large apps/games. I would really preciate any advise of any such roms, and i will report here if i find anything interesting myself
got mine working
...but cant update? how to update if system update shows that current is latest but still having low memory?
http://pan.baidu.com/share/link?shareid=68935606&uk=2335146322 i was searching for stock firmware to a1000l-f and found this! Could this be for real or will my tablet explode if i flash it
---------- Post added at 03:28 PM ---------- Previous post was at 02:28 PM ----------
and it was a real deal. Even system updates can be done and internal memory is what its supposed to be =) i dont know if this is wrong place to talk about this but a1000lf doesnt have much other places to be talked about.
BallStone said:
i was searching for stock firmware to a1000l-f and found this! Could this be for real or will my tablet explode if i flash it
---------- Post added at 03:28 PM ---------- Previous post was at 02:28 PM ----------
and it was a real deal. Even system updates can be done and internal memory is what its supposed to be =) i dont know if this is wrong place to talk about this but a1000lf doesnt have much other places to be talked about.
Click to expand...
Click to collapse
Thanks, its working! I flashed this rom, and now i have 3-3 GBytes partitions, and i have hungarian language too i searched this rom image for months....
After the flashing i got 6 system updates
Thank you very much!
download link
Can someone please share the ROM download links again?

[ROM] N920PSPT2AOK3_SPR Stock Factory Build

Sprint Build OK3 Stock Full Factory Tar
This is for the SM-N920P Galaxy Note 5, do NOT attempt to flash this on any other model.
5.1.1 Lollipop
This tar will allow you to restore the full factory load via Odin.
Download Link -->> N920PVPS2AOK3_N920PSPT2AOK3_SPR.zip
Installation
• Download the factory build and unzip it. The result will be a xxx.tar.md5 file.
• Download Odin attached to this post
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the tar.md5 file to AP / PDA (depending on version of Odin)
Note: it may take several minutes to verify file integrity, be patient
• Click the start button and let the Odin flash complete, the phone will automatically reboot when completed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you. Root messing with my phone and i need this. Thanks
tdunham said:
Sprint Build OK3 Stock Full Factory Tar
5.1.1 Lollipop
This tar will allow you to restore the full factory load via Odin.
Download Link -->> N920PVPS2AOK3_N920PSPT2AOK3_SPR.zip
Installation
• Download the factory build and unzip it. The result will be a xxx.tar.md5 file.
• Download Odin attached to this post
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the tar.md5 file to AP / PDA (depending on version of Odin)
Note: it may take several minutes to verify file integrity, be patient
• Click the start button and let the Odin flash complete, the phone will automatically reboot when completed
Click to expand...
Click to collapse
Are you building a rom from this? Keep up the good work.
rogerandgina said:
Are you building a rom from this? Keep up the good work.
Click to expand...
Click to collapse
Not right now. Moar Rom is based on OI6 and there aren't enough significant changes to warrant a rewrite. I'm holding off for Marshmallow/Android 6.0 I think.
Thank you sir. Good to have this file stashed away if something bad happens. Like zombies, plague, ect.
Thanks for what u do been using it since day one.
Sent from my SM-N920P using XDA Premium HD app
I'm assuming Android Pay and Samsung Pay will not be available still after installing this.
Sent from my SM-N920P using XDA Free mobile app
amase005 said:
I'm assuming Android Pay and Samsung Pay will not be available still after installing this.
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
Not if you have rooted and tripped knox!!!!!
Will I lose root after flashing this?
tayatl said:
Will I lose root after flashing this?
Click to expand...
Click to collapse
Yes.
tdunham said:
Yes.
Click to expand...
Click to collapse
Can this be rooted?
Will this wipe all my files on the phone or just the rom itself?
I'm thinking of picking up a Gear VR later today & I'm pretty sure i'll need to flash this .tar to get it to work properly? My current setup is MOAR & SkyHigh 3.0. I heard that kernel will allow it to work but must be on a OK3 build. Am I correct?
edit: yep, Need OK3
& double thanks for uploading this
@tdunham will your Moar rom for N5, will it work on my N5 with OK3
**Edit**
Nevermind I found my answer in Q&A thread.
Josephigloe said:
@tdunham will your Moar rom for N5, will it work on my N5 with OK3
**Edit**
Nevermind I found my answer in Q&A thread.
Click to expand...
Click to collapse
is that a No .... the answer is not in the thread,....
Globel said:
is that a No .... the answer is not in the thread,....
Click to expand...
Click to collapse
Yes, Moar rom will run over the OK3 firmware.
So wait, Android Pay functionality is lost after rooting the Note5 the same way Samsung Pay is? Like, forever?
MooreAJr said:
So wait, Android Pay functionality is lost after rooting the Note5 the same way Samsung Pay is? Like, forever?
Click to expand...
Click to collapse
Yes it is
Sent from my TW Slim v1 N920P using XDA Premium HD app
i had done flashing through this tar file. i am stuck on galaxy note 5 screen . i had tried all tar files . same issue. pl help
javed91214 said:
i had done flashing through this tar file. i am stuck on galaxy note 5 screen . i had tried all tar files . same issue. pl help
Click to expand...
Click to collapse
Are you sure this firmware is for your exact phone?
What is advantages of flashing this build

Samsung galaxy sm j727p - (boost mobile)

Hey there everyone,
I have a Samsung Galaxy SM J727P (Boost Mobile) - I am not quite sure what happened; however I sometimes power my phone off by pulling the battery. This time... at the very wrong time or the right time. I am guessing it was doing a system update; however I didn't select that and didn't get a notification.
When I powered it back up, it gave me an error and wouldn't boot.
I since then accidentally pressed some buttons and the screen loaded Android Recovery screen. I would flash it with ODIN however I don't want to lose any data. My SIM Card has my contacts I believe for the most part. I would like to save as much as possible.
Does anyone have any ideas what this error could mean for my data situation? I never once rooted this phone or changed stock ROM.
Here it is: (Also has cracked screen from running it over with my car):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for your time and LORD Bless! :good:
Best Regards,
Brandon
csc Home
BrandonKastning said:
Hey there everyone,
I have a Samsung Galaxy SM J727P (Boost Mobile) - I am not quite sure what happened; however I sometimes power my phone off by pulling the battery. This time... at the very wrong time or the right time. I am guessing it was doing a system update; however I didn't select that and didn't get a notification.
When I powered it back up, it gave me an error and wouldn't boot.
I since then accidentally pressed some buttons and the screen loaded Android Recovery screen. I would flash it with ODIN however I don't want to lose any data. My SIM Card has my contacts I believe for the most part. I would like to save as much as possible.
Does anyone have any ideas what this error could mean for my data situation? I never once rooted this phone or changed stock ROM.
Here it is: (Also has cracked screen from running it over with my car):
Thank you for your time and LORD Bless! :good:
Best Regards,
Brandon
Click to expand...
Click to collapse
yes you need to dowmload the next firmware version an flash it threw odin but use the CSC Home file when do so flash all four files AP BL CP an the CSC Home file this should save your Data ! P.S IF you are rooted you will still have to reinstall twrp an Magisk after flashing firmware !
RE:
peter couniaz said:
yes you need to dowmload the next firmware version an flash it threw odin but use the CSC Home file when do so flash all four files AP BL CP an the CSC Home file this should save your Data !
Click to expand...
Click to collapse
peter couniaz,
Would you agree that "J727PVPU6BSF2" would be the next version to flash it to correctly from the existing J727PVPU4BRK4 version of firmware?
I found the following direct links to the above mentioned firmware:
AP:
androidfilehost dot com/?w=file-thanks&fid=818070582850488362&mid=254&download_id=ac2523d3c5746caecae78252005a1a0a&tid=1578746727&hc=a557bb807dd4fbbf33973d2e1e7b4779e2bbc3cc71ecb7ade855cf0892403cf0
BL:
androidfilehost dot com/?fid=673956719939815291
CP:
androidfilehost dot com/?fid=890129502657578821
CSC:
androidfilehost dot com/?fid=890129502657578822
Do you think these are the correct versions? I remember the Developers here on XDA were using these back in 2016-2017 and I never had a problem then.
Thanks again! :good:
~ Brandon
CSC home
BrandonKastning said:
peter couniaz,
Would you agree that "J727PVPU6BSF2" would be the next version to flash it to correctly from the existing J727PVPU4BRK4 version of firmware?
I found the following direct links to the above mentioned firmware:
AP:
androidfilehost dot com/?w=file-thanks&fid=818070582850488362&mid=254&download_id=ac2523d3c5746caecae78252005a1a0a&tid=1578746727&hc=a557bb807dd4fbbf33973d2e1e7b4779e2bbc3cc71ecb7ade855cf0892403cf0
BL:
androidfilehost dot com/?fid=673956719939815291
CP:
androidfilehost dot com/?fid=890129502657578821
CSC:
androidfilehost dot com/?fid=890129502657578822
Do you think these are the correct versions? I remember the Developers here on XDA were using these back in 2016-2017 and I never had a problem then.
Thanks again! :good:
~ Brandon
Click to expand...
Click to collapse
You may need to download from another site the J727PVPU6BSF2 will work but you need the CSC Home file to try to save your data !
Try this link
https://samfrew.com/model/SM-J727P/
Or try the sammobile site !
[SOLVED] Thanks peter couniaz
peter couniaz said:
You may need to download from another site the J727PVPU6BSF2 will work but you need the CSC Home file to try to save your data !
Try this link
samfrew dot com/model/SM-J727P/
Or try the sammobile site !
Click to expand...
Click to collapse
Thank you again peter,
I was able to solve this by doing as you said and using the following firmware:
samfrew dot com/download/Galaxy__J7__Perx__/tadn/BST/J727PVPU4BRK4/J727PSPT4BRK4/
NOTE: If you are using Boost Mobile and an American like myself; Don't hesitate using Regional Firmware: (BST). It's the Boost Mobile Branding that's the true differential.
I flashed with ODIN revision Current.13 and it worked wonderfully!
Best Regards,
Brandon :good:

Categories

Resources