Related
Since I couldn't find anything on this bloody tablet and unfortunately I have one here is what I did to get it working
Unfortunately the hardware buttons will pretty much all be off since they are not mapped correctly so this is the downfall.
!back up your stuff, I am not responsible for bricking or anything else
Install Clockwork Recovery by doing the following
1) Download here (this is for 7016 but works on 7012, buttons are a little off but you will get used to it, use volume down to scroll and volume up to select, back works.) get the file called "ClockworkMod Recovery 5, CyanogenMod 7, FWDN image"
http://androtab.info/cyanogenmod/telechips/
2) install by going into fwdn mode with this command in dos with no parenthesis (adb reboot-bootloader)
3)Then type (fastboot flash recovery c:\recovery.img) or where ever your recovery.img file is.
4) Go into recovery and install this zip file from sd card
KYROS7016GB-8K-cyanogen-signed.zip
which is located here -> http://mirrors.androtab.info/oldfiles/telechips/cm7/20111029/KYROS7016GB-8K/
Attempted install from ZIP file on internal SD storage via CWM recovery.
Install failed immediately.
This works!!
A_Elizondo said:
Since I couldn't find anything on this bloody tablet and unfortunately I have one here is what I did to get it working
Unfortunately the hardware buttons will pretty much all be off since they are not mapped correctly so this is the downfall.
!back up your stuff, I am not responsible for bricking or anything else
Install Clockwork Recovery by doing the following
1) Download here (this is for 7016 but works on 7012, buttons are a little off but you will get used to it, use volume down to scroll and volume up to select, back works.) get the file called "ClockworkMod Recovery 5, CyanogenMod 7, FWDN image"
[
2) install by going into fwdn mode with this command in dos with no parenthesis (adb reboot-bootloader)
3)Then type (fastboot flash recovery c:\recovery.img) or where ever your recovery.img file is.
4) Go into recovery and install this zip file from sd card
KYROS7016GB-8K-cyanogen-signed.zip
Click to expand...
Click to collapse
Thanks this worked. The bottom link no longer works but the top link will take you to the page with all the files.
-Must have an external SD card
-You only need the ClockworkMod Recovery 5 and the CyanogenMod7 files no need for the FWDN image.
-You will also need the CM7 gapps you can get those by searching for CM7 gapps on google first link
-I have managed to fix some of the hardware buttons. After install volume_down is menu, volume_up is home, and the back button works as it should.
-you can go into /system/usr/keylayout and change all of the lines that say HOME and MENU to VOLUME_UP and VOLUME_DOWN to all of the files in the folder you will get volume buttons working.
-I can not get the search home or menu buttons to work I tried keyevent viewer from the app store and pressing any of the buttons shows nothing.
Oh, No!
Accidentally installed CWM for 7015, and now can't boot into CWM. I need to install Watery Kyros, as I messed up the stock ROM. Help?
did you try
chriswatson98 said:
Accidentally installed CWM for 7015, and now can't boot into CWM. I need to install Watery Kyros, as I messed up the stock ROM. Help?
Click to expand...
Click to collapse
Did you try placing a recovery.img on the root of your SD and booting into bootloader and it re flashing the correct CWM recovery.
Brick mid7012
Im stuck in coby logo with blue words showing fastboot mode plis i need to rebuild the system i dont know how plz help me!
W00t! Working on 7012
Nice! I just loaded CM7 for the 7016 on my 7012.
You have to open the signed cyanogen archive in 7zip (or whatever) and edit the the updater-script at this path:
\META-INF\com\google\android\
The entire first line, including the semicolon at the end of it but nothing more, has to be removed. The installer is just checking the tablet's ID to make sure it's only going on supported hardware (oops).
After that, the install goes nicely. Don't be worried if it takes a while to get off of the COBY screen.
I flashed this on a coby mid7012 and need to know how to align the screen? It calibrates but it's off to the right about 1/2 inch. Thanks
---------- Post added at 02:17 AM ---------- Previous post was at 02:15 AM ----------
DasBub said:
Nice! I just loaded CM7 for the 7016 on my 7012.
You have to open the signed cyanogen archive in 7zip (or whatever) and edit the the updater-script at this path:
\META-INF\com\google\android\
The entire first line, including the semicolon at the end of it but nothing more, has to be removed. The installer is just checking the tablet's ID to make sure it's only going on supported hardware (oops).
After that, the install goes nicely. Don't be worried if it takes a while to get off of the COBY screen.
Click to expand...
Click to collapse
Are you having any issues with your install? My kids had messed up this tablet before I could do a backup of the stock system.
coby kyros 7036
does anyone know if this will work for a 7036 kyros or is there one out there? and how do i install cwm?
---------- Post added at 09:20 PM ---------- Previous post was at 09:02 PM ----------
rekcahtnitsud said:
does anyone know if this will work for a 7036 kyros or is there one out there? and how do i install cwm?
Click to expand...
Click to collapse
ok i got the gapps off another sight and got it rooted. id still like cwm and cyanogenmod for it if anyone knows how.
rekcahtnitsud said:
does anyone know if this will work for a 7036 kyros or is there one out there? and how do i install cwm?
---------- Post added at 09:20 PM ---------- Previous post was at 09:02 PM ----------
ok i got the gapps off another sight and got it rooted. id still like cwm and cyanogenmod for it if anyone knows how.
Click to expand...
Click to collapse
It is not listed Here so it don't look like it will work for your tablet sorry.
You need to find CWM recovery for your device and you can follow the install in the first post here.
Any fix for the misalignment?
gimmeitorilltell said:
I flashed this on a coby mid7012 and need to know how to align the screen? It calibrates but it's off to the right about 1/2 inch. Thanks
---------- Post added at 02:17 AM ---------- Previous post was at 02:15 AM ----------
Are you having any issues with your install? My kids had messed up this tablet before I could do a backup of the stock system.
Click to expand...
Click to collapse
I have the same problem with my MID7012 too.
---------- Post added at 12:57 AM ---------- Previous post was at 12:56 AM ----------
I guess nobody's monitoring this thread...
hi! I want to install a custom rom on my galaxy fit..i tried to root my phone with all the methods but it fails to root! i tried all versions of gingerbreak,z4root,superoneclick,universalroot,unlockroot,easyroot,and all btw every time it fails!please help me! help me rooting my phone.. thank you!
how can i install custom recovery?is there any tool or something?
Did u search fda to root ur phne
Sent from my Micromax A50
---------- Post added at 01:16 PM ---------- Previous post was at 01:11 PM ----------
I found this process by mohitswani
Samsung Galaxy Fit S5670 – Process For Root & Install CustomRecovery ImageSamsung Galaxy Fit is one of the most famous device which is known because of it’s affordability and great price. Galaxy Fit users can now enjoy Rooting the device, and due course of this article we will tell you how you can install Custom Recovery on your device after Rooting it..Warning for Beginners:Note: This is an rooting and installing process for the mobile phone named Galaxy Fit S5670 and has to be applied to the Mobile phone using the Recovery Mode in the mobile phone. The steps which are included in this guide are very risky and can even brick off your mobile phone. Unless you are aware with CustomROMS, Firmwares and ODIN, don’t even try these things on your mobile phone..Pre-Requisites to Root and InstallCustom Recovery on your SamsungGalaxy FitThe instructions are working for Samsung Galaxy Fit, S5670 Originally manufactured.Backup all of your SMS Messages using SMS Backup Application.Sync all of your Contacts with theGmail Application.Copy all of your notes manually to somewhere else, as if in case yourmobile phone gets bricked these notes will be deleted from the mobile phone.Take a backup of call logs, APN Settings, and other important things.Charge your mobile phone so that it would be having more than 60% battery.Now, enable USB Debugging Mode in your mobile phone (Settings > Applications >Development > USB Debugging).Samsung Device drivers installed in your computer.Follow all steps carefully in order to get 100% assured success.How To Root and Install Custom Recovery on your Samsung Galaxy FitNote: We have written each and every step clearly in order to make the rooting process successful but if any wrong step is taken then Neither me nor thedroidnation.comwill be held responsible in case your device gets bricked.Download Odin, Rooting File and the OPS File from the links to your computer and move them to anew folder in order to prevent any confusions.Turn off your mobile phone and bring the mobile phone to download mode (hold the Volume Down button + Home Key + Power Button and the device will start itself).Now, Shoot up the ODIN executable file.Click on the OPS Tab in the ODINwindow and select the “BENI_v1.0.ops” file after that tick the “One Package” option and select the file “beni_cwm-5_ext4_v2“.Connect your mobile phone to the computer, and wait for the devicedrivers to get installed. After the installation of drivers is complete then the ID:COM section in the ODIN downloader window will turn yellow.Wait for some time, and as soon as the installation is complete thephone will reboot itself. Now, you can remove the USB cable.Now, You can access recovery mode on your mobile phone by holding Volume Up + Home Button+ Power Key and the device will start itself.Now, select “Wipe data/factory reset” & “Wipe Cache partition” one-by-one and the device caches will be cleared off. After this select “Wipe dalvik cache“.Congratulations!! You’ve successfully installed Custom Recovery in your Samsung Galaxy Fit...Press Thanks button If I help U in any manner...
By mohitswani not me.press thanks if hlpd
Sent from my Micromax A50
---------- Post added at 01:17 PM ---------- Previous post was at 01:16 PM ----------
For original these visit
http://forum.xda-developers.com/showthread.php?t=1595441
Sent from my Micromax A50
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
For all custom roms for ur device visit
http://allaboutgalaxyfit.blogspot.com/
Pres thanks if Helped u
Sent from my Micromax A50
ajeteja said:
Did u search fda to root ur phne
Sent from my Micromax A50
---------- Post added at 01:16 PM ---------- Previous post was at 01:11 PM ----------
I found this process by mohitswani
Samsung Galaxy Fit S5670 – Process For Root & Install CustomRecovery ImageSamsung Galaxy Fit is one of the most famous device which is known because of it’s affordability and great price. Galaxy Fit users can now enjoy Rooting the device, and due course of this article we will tell you how you can install Custom Recovery on your device after Rooting it..Warning for Beginners:Note: This is an rooting and installing process for the mobile phone named Galaxy Fit S5670 and has to be applied to the Mobile phone using the Recovery Mode in the mobile phone. The steps which are included in this guide are very risky and can even brick off your mobile phone. Unless you are aware with CustomROMS, Firmwares and ODIN, don’t even try these things on your mobile phone..Pre-Requisites to Root and InstallCustom Recovery on your SamsungGalaxy FitThe instructions are working for Samsung Galaxy Fit, S5670 Originally manufactured.Backup all of your SMS Messages using SMS Backup Application.Sync all of your Contacts with theGmail Application.Copy all of your notes manually to somewhere else, as if in case yourmobile phone gets bricked these notes will be deleted from the mobile phone.Take a backup of call logs, APN Settings, and other important things.Charge your mobile phone so that it would be having more than 60% battery.Now, enable USB Debugging Mode in your mobile phone (Settings > Applications >Development > USB Debugging).Samsung Device drivers installed in your computer.Follow all steps carefully in order to get 100% assured success.How To Root and Install Custom Recovery on your Samsung Galaxy FitNote: We have written each and every step clearly in order to make the rooting process successful but if any wrong step is taken then Neither me nor thedroidnation.comwill be held responsible in case your device gets bricked.Download Odin, Rooting File and the OPS File from the links to your computer and move them to anew folder in order to prevent any confusions.Turn off your mobile phone and bring the mobile phone to download mode (hold the Volume Down button + Home Key + Power Button and the device will start itself).Now, Shoot up the ODIN executable file.Click on the OPS Tab in the ODINwindow and select the “BENI_v1.0.ops” file after that tick the “One Package” option and select the file “beni_cwm-5_ext4_v2“.Connect your mobile phone to the computer, and wait for the devicedrivers to get installed. After the installation of drivers is complete then the ID:COM section in the ODIN downloader window will turn yellow.Wait for some time, and as soon as the installation is complete thephone will reboot itself. Now, you can remove the USB cable.Now, You can access recovery mode on your mobile phone by holding Volume Up + Home Button+ Power Key and the device will start itself.Now, select “Wipe data/factory reset” & “Wipe Cache partition” one-by-one and the device caches will be cleared off. After this select “Wipe dalvik cache“.Congratulations!! You’ve successfully installed Custom Recovery in your Samsung Galaxy Fit...Press Thanks button If I help U in any manner...
By mohitswani not me.press thanks if hlpd
Sent from my Micromax A50
---------- Post added at 01:17 PM ---------- Previous post was at 01:16 PM ----------
For original these visit
http://forum.xda-developers.com/showthread.php?t=1595441
Sent from my Micromax A50
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
For all custom roms for ur device visit
http://allaboutgalaxyfit.blogspot.com/
Pres thanks if Helped u
Sent from my Micromax A50
Click to expand...
Click to collapse
btw by doing this only custom recovery will be installed...what about rooting my phone? and Isn't there any easier way?this is so complicated..
Have u tried this?
http://forum.xda-developers.com/showthread.php?t=1606380
Press thnx button if it was helpful(plz)
Sent from my GT-S5670 using XDA
ROM :https://drive.google.com/file/d/0B1VlhmzBW9opd01MaW9pZU4ySGs/view?usp=drivesdk
Port patch:https://drive.google.com/file/d/0B1VlhmzBW9opLUpSa0V4S2lxWVU/view?usp=drivesdk
Miui 6.5.19 New Features
MIUI 7 v6.5.19
Install Proccess:
1. Boot into Recovery
2. Wipe System, Cache, Dalvik Cache, Data
3. Flash Miui 7 v6.5.19.zip
4. Flash Port Patch.zip
5. Reboot
6. When First screen Shows, long press power button and enter in Airplane Mode.( If you want to save ur 6.00 Rupees)
7. Do Not connect to wifi in initial setup.
8. After inital setup when homescreen shows, u can turn off Airplane mode and use Wifi as well.
App Installing from Sd card Proccess:
1. Go to Security>Permission and turn on the Install Usb option.
2. Then go to Settings>Additional Settings>Privacy> and turn on Unknown Resources.
Enjoy...
Short Review:
Looks: 10/10
Performance: 9/10
Battery: 8/10
New Features:
0. Mi Space is Back
1. Touch Assistant
2. Daily Lockscreen
3. Music lyrics on Homescreen
4. Smart Keyboard
5. Fm, Video working
6. Viper4android, Xposed supporting
7. CRT effect during lockscreen
8. New camera effects and transitions
9. Mi Cloud
10. No Lag/Bug till yet
11. Email working
12. No force Close faced yet.
13. Snappy Fast
14. Brand New Themes
Cons.:
Did not faced any cons.
Working well for me.
My Rating: 9.5/10
Thank you.
Still can't login into mi accout. Find device error again.
Not pre rooted. -> rooted by kingroot
Launcher changes to default miui launcher after reboot.
GreenIcePhoenix said:
Still can't login into mi accout. Find device error again.
Not pre rooted. -> rooted by kingroot
Launcher changes to default miui launcher after reboot.
Click to expand...
Click to collapse
I have no problems of face of default them....flash root file for root device...
Miui account working.
Try to flash ROM again SD card erased
Wipe all
iammrugesh said:
I have no problems of face of default them....flash root file for root device...
Miui account working.
Try to flash ROM again SD card erased
Wipe all
Click to expand...
Click to collapse
Tried it as you said... still unable to login
Unable to flash! It says unable to execute updater binary in zip...plz suggest a fix
[Abhi said:
;67061286]Unable to flash! It says unable to execute updater binary in zip...plz suggest a fix
Click to expand...
Click to collapse
Format sd card...phone storage
Cannot log in to mi account.. pls help
@drsarkar..
Turn on airplane mode,
Reset the device to factory reset from setting.
Again when first setup, turn on airplane mode and when home screen shows then log in..
Worked for me...
[email protected] said:
@drsarkar..
Turn on airplane mode,
Reset the device to factory reset from setting.
Again when first setup, turn on airplane mode and when home screen shows then log in..
Worked for me...
Click to expand...
Click to collapse
No help bro.. When I tried to do factory reset from settings in airplane mode the same message pops up ' checking device status'.
which recovery suit this rom well?
jxmodi said:
which recovery suit this rom well?
Click to expand...
Click to collapse
Twrp
i m using TWRP V2.8.4.0-Rev.2
but i get error
i forgot
http://forum.xda-developers.com/q3000/development/partition-xolo-q3000-t3019423
partion process
---------- Post added at 12:44 PM ---------- Previous post was at 12:40 PM ----------
always mention this step
so in future no one miss it...
thanks for roms..
http://forum.xda-developers.com/q3000/development/partition-xolo-q3000-t3019423
---------- Post added at 01:26 PM ---------- Previous post was at 12:44 PM ----------
any solution for browser?
This is the method I did to successfully root my device....J700H Marshmallow.
I'm not responsible for any harm upon rooting your phone, root at your own risk.
Steps to root your phone:
1) Download TWRP Recovery & SuperSU file to your computer. Then copy SuperSU to your device.
2) Turn off your phone.
3) Go to download mode (by pressing Volume down+home+power buttons at the same)
4) Open ODIN
6) Connect your phone to your computer through USB cable and wait till Odin detects your device.
7) In ODIN click on AP and then select the recovery file you downloaded.
8) Click on start. Done.
9) Turn off your phone.
10) Reboot to recovery (by pressing Volume up+home+power buttons).
11) Flash SuperSU you copied to your device.
12) Done....Reboot....Enjoy.
Brother ? Plz try To say how to work Xposed module.. I already root my device.. But Xposed module Greenify and Other apps stopped my phone.apk
Sent from my SM-J700H using XDA-Developers mobile app
Nilshalok said:
Brother ? Plz try To say how to work Xposed module.. I already root my device.. But Xposed module Greenify and Other apps stopped my phone.apk
Sent from my SM-J700H using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry but don't use Xposed.
not working|
الاذان شغال عندك في الفيدو لو انت عربي اكلمك عربي اسهل
Triggers the Knox Counter or not?
My rootchecker app says "Sorry root access is not properly installed, i did evrything step by step.
---------- Post added at 08:19 PM ---------- Previous post was at 07:43 PM ----------
ok ...now that have changed the statement ,it says root access available....thanks for the guide..:good::good::good::good:
shahzeb khattak said:
My rootchecker app says "Sorry root access is not properly installed, i did evrything step by step.
---------- Post added at 08:19 PM ---------- Previous post was at 07:43 PM ----------
ok ...now that have changed the statement ,it says root access available....thanks for the guide..:good::good::good::good:
Click to expand...
Click to collapse
what we can do?
Hi XDA. Good Day. I really need your help. I used TWRP and accidentally wipe all the partitions like Dalvik Cache, Cache, Data, Internal Storage, System, Cust and External Storage and after that I got no OS installed. Any idea how to fix this one?
Got any Solution?
usman161 said:
Hi XDA. Good Day. I really need your help. I used TWRP and accidentally wipe all the partitions like Dalvik Cache, Cache, Data, Internal Storage, System, Cust and External Storage and after that I got no OS installed. Any idea how to fix this one?
Click to expand...
Click to collapse
Hello there! Did you get any solution? If yes, then OK. If NO, then I could help you..
Reply If you got it...
Abdul Rehman: said:
Hello there! Did you get any solution? If yes, then OK. If NO, then I could help you..
Reply If you got it...
Click to expand...
Click to collapse
Hi I have the same issues, would you please help me? I would really appreciate it
OK, Let's see,
questionxda said:
Hi I have the same issues, would you please help me? I would really appreciate it
Click to expand...
Click to collapse
So Please tell me what issues are you facing?
---------- Post added at 12:40 AM ---------- Previous post was at 12:15 AM ----------
Abdul Rehman: said:
So Please tell me what issues are you facing?
Click to expand...
Click to collapse
Are you able to enter into fastboot mode?
Abdul Rehman: said:
So Please tell me what issues are you facing?
---------- Post added at 12:40 AM ---------- Previous post was at 12:15 AM ----------
Are you able to enter into fastboot mode?
Click to expand...
Click to collapse
Im facing boot loops, I wanted to install lineage os but my device was not supported, I accidentaly deleted all the memory through twrp, the phone have unlocked bootloader and it can get into fastboot without issues, the adb/fastboot on pc it detects the phone. The one thing which I was unable to do was to get into factory update via holding vol up down and power button
I found the stock firmware rom for my phone here :
https://huaweidl.com/download/honor-4c/chm-u01/
hope it can work
questionxda said:
Im facing boot loops, I wanted to install lineage os but my device was not supported, I accidentaly deleted all the memory through twrp, the phone have unlocked bootloader and it can get into fastboot without issues, the adb/fastboot on pc it detects the phone. The one thing which I was unable to do was to get into factory update via holding vol up down and power button
Click to expand...
Click to collapse
You can't go to factory update like above until you flash "stock recovery.img"
Do you have the file named " stock.img " ??
---------- Post added at 12:55 AM ---------- Previous post was at 12:51 AM ----------
Abdul Rehman: said:
You can't go to factory update like above until you flash "stock recovery.img"
Do you have the file named " stock.img " ??
Click to expand...
Click to collapse
You'll have to flash the official stock recovery.img first
and then you'll be able to install Official Firmware or "Update.app" on your mobile..
Abdul Rehman: said:
You can't go to factory update like above until you flash "stock recovery.img"
Do you have the file named " stock.img " ??
---------- Post added at 12:55 AM ---------- Previous post was at 12:51 AM ----------
You'll have to flash the official stock recovery.img first
and then you'll be able to install Official Firmware or "Update.app" on your mobile..
Click to expand...
Click to collapse
unfortunately I dont have a file called like that, where can I get one? would you please walk me through the process of how to install it? I would be very thankful if that will be possible, I think this tutorial will help lots of other people too which is a good thing
can the file you mentioned be somewhere around these files, https://romfirmware.com/2017/07/29/firmware-update-huawei-honor-4c-chm-u01/
This is what comes up when I searched for stockrecovery img
I also found this link
https://uptoandroid.com/huawei-honor-4c-restore-stock-recovery/
but previous os installed was android 6 marshmallow + emui 4, Im not sure which file to dowload and if it would work since they are mentioning emui 3 and android 5
questionxda said:
unfortunately I dont have a file called like that, where can I get one? would you please walk me through the process of how to install it? I would be very thankful if that will be possible, I think this tutorial will help lots of other people too which is a good thing
Click to expand...
Click to collapse
You can download this file from here (35.4 MB)
https://mega.nz/#!M9slkCZC!d2tQsU8qPxdKMiaTbi6UKMndLZ-dXzhi5U6A6df-7AE
or from my Google Drive:
https://drive.google.com/file/d/15psv3zRWoL_1yNF7NqzlLKfxa5SKJ__B/view?usp=sharing
Abdul Rehman: said:
You can download this file from here (35.4 MB)
https://mega.nz/#!M9slkCZC!d2tQsU8qPxdKMiaTbi6UKMndLZ-dXzhi5U6A6df-7AE
or from my Google Drive:
https://drive.google.com/file/d/15psv3zRWoL_1yNF7NqzlLKfxa5SKJ__B/view?usp=sharing
Click to expand...
Click to collapse
I flashed it the same way as I was doing twrp, copied into adb folder first then shift +right click and open cmd and then I checked fastboot devices, then fastboot flash recovery recovery.img
What to do now sir? hope I did not messed up something
Download the file and paste it into root of your ADB folder (where you've placed adb.exe file)
1. Now Hold Shift and Right Click (on empty area) and choose open command window here.
2. (On your mobile) Enter into fastboot mode by pressing Volume Down key+Power Key together. (while mobile connected to computer)
3. Now in command prompt: type: fastboot devices to check device connected or not (optional)
4. Now Type: fastboot flash recovery stock.img OR recovery.img (whatever the name of file you downloaded) and hit enter.
5. Flashing will start and done in a few seconds.
6. When it show ok OR Finished, you are done.
Now your phone is in stock recovery mode...
---------- Post added at 01:34 AM ---------- Previous post was at 01:32 AM ----------
questionxda said:
I flashed it the same way as I was doing twrp, copied into adb folder first then shift +right click and open cmd and then I checked fastboot devices, then fastboot flash recovery recovery.img
What to do now sir? hope I did not messed up something
Click to expand...
Click to collapse
was it flashed completely?
Abdul Rehman: said:
Download the file and paste it into root of your ADB folder (where you've placed adb.exe file)
1. Now Hold Shift and Right Click (on empty area) and choose open command window here.
2. (On your mobile) Enter into fastboot mode by pressing Volume Down key+Power Key together. (while mobile connected to computer)
3. Now in command prompt: type: fastboot devices to check device connected or not (optional)
4. Now Type: fastboot flash recovery stock.img OR recovery.img (whatever the name of file you downloaded) and hit enter.
5. Flashing will start and done in a few seconds.
6. When it show ok OR Finished, you are done.
Now your phone is in stock recovery mode...
---------- Post added at 01:34 AM ---------- Previous post was at 01:32 AM ----------
was it flashed completely?
Click to expand...
Click to collapse
first time it failed because of typo, then when I wrote the command again it went through it showed message okay, please how to proceed from here?
OK..
So, Do you have any Official Firmware (named Update.app) in any zip file???
---------- Post added at 02:01 AM ---------- Previous post was at 01:39 AM ----------
Abdul Rehman: said:
OK..
So, Do you have any Official Firmware (named Update.app) in any zip file???
Click to expand...
Click to collapse
If no, then you can download from the official website of Huawei.
If yes, then proceed to following:
Extract the zip file containing "dload\UPDATE.APP" file
Attach SD card to the Computer. Copy the "dload" folder (containing file ) and paste it in the root of SD Card.
Insert SD card into the mobile.
Enter into recovery mode by holding volume and power keys.
Now It will automatically detect the firmware file and begin flashing.
Let it complete and You are Done...
Abdul Rehman: said:
OK..
So, Do you have any Official Firmware (named Update.app) in any zip file???
---------- Post added at 02:01 AM ---------- Previous post was at 01:39 AM ----------
If no, then you can download from the official website of Huawei.
If yes, then proceed to following:
Extract the zip file containing "dload\UPDATE.APP" file
Attach SD card to the Computer. Copy the "dload" folder (containing file ) and paste it in the root of SD Card.
Insert SD card into the mobile.
Enter into recovery mode by holding volume and power keys.
Now It will automatically detect the firmware file and begin flashing.
Let it complete and You are Done...
Click to expand...
Click to collapse
I did so I formated my sd card and then extracted the zip with dload folder into the sd card. After that I removed the sd card and put it back into the phone and then I pushed vol up and vol down and then pushed the power button. after a while the honor screen turned on and after that the recovery emui utility installed the android and that was it! Thank you for helping me to unbrick this device I really appreciate it I wanted it to flash it originally with lineage only because of privacy concerns, would you give me tips on how to make the phone more privacy related? so it will spy on me lesser? I mean is it possible to get near lineage os in terms of privacy?
questionxda said:
I did so I formated my sd card and then extracted the zip with dload folder into the sd card. After that I removed the sd card and put it back into the phone and then I pushed vol up and vol down and then pushed the power button. after a while the honor screen turned on and after that the recovery emui utility installed the android and that was it! Thank you for helping me to unbrick this device I really appreciate it I wanted it to flash it originally with lineage only because of privacy concerns, would you give me tips on how to make the phone more privacy related? so it will spy on me lesser? I mean is it possible to get near lineage os in terms of privacy?
Click to expand...
Click to collapse
I'm Sorry! I do not know much about Lineage OS. Once, I tried to flash Lineage OS but got same problem as you.
Later on, I found a complete way, But couldn't do myself due to lack of time. However, Here is the link for step by step guide.
>>>Start Reading From Post # 14 till End of Thread:
https://forum.xda-developers.com/honor-4c/help/honor-4c-stuck-logo-to-recovery-t3702303/page2
Check the Following Link for collection of custom firmwares for Honor 4c
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942
***** One last tip: You should create a backup of your Mobile Data using TWRP recovery.
It will make a backup (of size of about 4.2 GB) of Your Whole "Data and OS" and store it in SD Card (or in your computer.)
Later, whenever you stuck in any problem like before, you can simply restore your phone, it will be restored to the same condition. (along with user data)
Read, apply and say thanks to XDA Forum If above links help you. However keep on searching within forum and over the internet for further information... :good:
Abdul Rehman: said:
I'm Sorry! I do not know much about Lineage OS. Once, I tried to flash Lineage OS but got same problem as you.
Later on, I found a complete way, But couldn't do myself due to lack of time. However, Here is the link for step by step guide.
>>>Start Reading From Post # 14 till End of Thread:
https://forum.xda-developers.com/honor-4c/help/honor-4c-stuck-logo-to-recovery-t3702303/page2
Check the Following Link for collection of custom firmwares for Honor 4c
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942
***** One last tip: You should create a backup of your Mobile Data using TWRP recovery.
It will make a backup (of size of about 4.2 GB) of Your Whole "Data and OS" and store it in SD Card (or in your computer.)
Later, whenever you stuck in any problem like before, you can simply restore your phone, it will be restored to the same condition. (along with user data)
Read, apply and say thanks to XDA Forum If above links help you. However keep on searching within forum and over the internet for further information... :good:
Click to expand...
Click to collapse
Hi thank you very much for all the tips and advice I really appreciate that place and people like this exist, may you have a beautiful day
Hi Sir, My Huawei G Play Mini ( CHC-U01 ) is in Boot-Loop. how do i fix it?
i tired Fastboot with all firmwares and i read all the guides but still no fix.