Hi, I have an unbranded P5100 (wifi + 3G) bought in Australia. I need to reset to stock firmware which is unfortunately still 4.0.3 here in Australia.
Now I went onto sammobile and entered my model number, country and chose XSA.
It comes up with:
Model: GT-P5100
Country: Australia
Version: Android 4.0.4
Product Code: XSA
PDA: P5100XWALE3
CSC: P5100XSAALE1
MODEM: P5100XXLD7
All this data is correct except for the Android version. My tablet came with 4.0.3 and not 4.0.4.
Anyway, I downloaded the file, but when opening it, I can't find the modem file at all. It only has the MD5 file. So how do I go about unrooting and bringing it back to stock again without having the modem file?
Any tips would be greatly appreciated
After Dialling *#1234#, I get output
PDA: E160KKKJMB1
PHONE: N7000ZSJLL7
MOVINAND: NONE
Build info: Wed Feb13 16:58:41 KST 2013
My Device setting output is
Baseband Version
N7000ZSJLL7
Kernel Version
3.0.31-704944
Build Number
JZO54K.N7000ZSJMB1.EROM.N7000
Just want to know which country's update is installed on my device ?
Is it the latest one?
I tried to flash N7000UBLSG_N7000UVCLS3_CTI.zip through sd-card,
but got error that can't open, zip is bad.
Tried another N7000XXLT6_N7000XSALS8_XSA.zip but got same result.
Also tried to flash both updates through odin, but odin gets stuck at NAND write start.
What should I do, If I want to update my Device.?
Tried to flash my note N7000 with odin, but it always stuck at NAND WRITE. Also tried for different firmware but got the same result.
Here details of my Device:
After Dialling *#1234#, I get output
PDA: E160KKKJMB1
PHONE: N7000ZSJLL7
MOVINAND: NONE
Build info: Wed Feb13 16:58:41 KST 2013
Device setting o/p :
Baseband Version
N7000ZSJLL7
Kernel Version
3.0.31-704944
Build Number
JZO54K.N7000ZSJMB1.EROM.N7000
What need to be done if I want to upgrade to other country firmware?
Can someone please help me?
Is it possible to root my phone, or is there no point keep looking?
I've been searching for many hours through forums but is still clueless..
I got this S6 last week, bought it second hand.
Apparently OS was updated with the latest 6.0.1 in September.
Thanks // Denny
TECHNICAL DATA:
GENERAL INFO
Manufacturer: samsung
Brand: samsung
Phone Model: SM-G920F
Device Type: zeroflte
Product Name: zerofltexx
Country of Origin: MADE IN VIETNAM
Manufacturing Date: 20150704
Knox Warranty Void: 0x0
Colour: White
Internal Storage: 32 GB
CSC INFO
Product Code: SM-G920FZWANEE
Original CSC Code:
Firmware's CSC Code: NEE
Active CSC Code: NEE
Available CSC Codes:
CSC Country: Nordic
CSC Country ISO: SE
Mobile Operator: Comviq / 24007
FIRMWARE INFO
Bootloader Version: G920FXXU4DPIH
PDA Version: G920FXXU4DPIH
CSC Version: G920FNEE4DPI1
Baseband Version: G920FXXU4DPIM
Latest Firmware: Yes
Kernel Version: 3.10.61-8826787 [email protected] #1 64-bit
Java Virtual Machine: ART 2.1.0
OS INFO
Root Existence: No
Android Version: 6.0.1
Build Number: MMB29K.G920FXXU4DPIH (G920FXXU4DPIH)
Build Fingerprint: samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXU4DPIH:user/release-keys
Build Description: zerofltexx-user 6.0.1 MMB29K G920FXXU4DPIH release-keys
Build Date: Tue Sep 13 14:16:37 KST 2016
Changelist: 8826787
HARDWARE INFO
Hardware: samsungexynos7420
Board: universal7420 [64-bit]
Platform: exynos5
Chip: exynos7420
GPU: ARM Mali-T760
Modem Board: SHANNON333
Hardware Revision: MP 0.800
Total RAM: 2.62 GB
Screen: 5.06 inches, 1440 × 2560 pixels, 580 ppi, 640 dpi
Sound Card: Pacific WM1840 Sound
Camera:
Rear: 15.9MP / SLSI_S5K2P2_FIMC_IS
Front: 5MP / SLSI_S5K4E6_FIMC_IS
Battery: Li-ion 2550 mAh, Health: Good
DEVICE ID
IMEI: 352148077353234
Android Serial Number: 06157df63b63672d
Samsung Serial Number: RF8G705B1RN
You can just flash CF-AutoRoot to root the phone;
https://download.chainfire.eu/733/CF-Root/CF-Auto-Root/CF-Auto-Root-zeroflte-zerofltexx-smg920f.zip
Sure about this?
forumber2 said:
You can just flash CF-AutoRoot to root the phone;
Click to expand...
Click to collapse
And this must be with odin in Windows?
Heimdall in Linux isn't a good option?
I don't have to worry about bootloops?
And/or possibly reflashing from scratch and loose my data?
And then if it works there's no problem with installing TWRP is there?
Thanks
// Denny
dennylumberg said:
And this must be with odin in Windows?
Heimdall in Linux isn't a good option?
I don't have to worry about bootloops?
And/or possibly reflashing from scratch and loose my data?
And then if it works there's no problem with installing TWRP is there?
Thanks
// Denny
Click to expand...
Click to collapse
I think you can use Heimdall without any problem.
You don't have worry about bootloops.
You can revive the phone with reflashing stock firmware without losing data if you have a problem.
You can install TWRP after or before rooting, it doesn't depend on root status.
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Has the phone's imei been blacklisted in some way?
I checked it and it’s not
Seems you cant flash an older firmware. Grab the very latest firmware (even if its not your csc) and flash that.
I found this the hard way
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
plz try flashing this firmware and write pB6.tar modem then patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
sharufi said:
plz try flashing this firmware and patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
Click to expand...
Click to collapse
lol check log b4 answer i'm using U2 and u sent me link for U1 rom how i can downgrade !!!!!
instrumentaly said:
lol check log b4 answer i'm using U2 and u sent me link for U1 rom how i can downgrade !!!!!
Click to expand...
Click to collapse
its new build, 2018-02-18, it should work
sharufi said:
plz try flashing this firmware and write pB6.tar modem then patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
Click to expand...
Click to collapse
how can I patch the certificate? I have the same problem
Atoriki92 said:
how can I patch the certificate? I have the same problem
Click to expand...
Click to collapse
could you flash the rom having binary 2 installed ?
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
Same problem for me with my G935F, have you found solution?
---------- Post added at 01:36 AM ---------- Previous post was at 01:34 AM ----------
Same problem for my, on G935F. Have you found solution to fix it?
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
Based on the information i can see available to me your PDA, BL and CP version are all AP SWREV B:2 whereas your CSC is using AP SWREV B:1, you will not be able to connect to any network whilst your CSC is set to B1, you need to download a full firmware package that contains all AP SWREV B:2 if your in australia or uk the new 8.0 oreo firmware is out on sammobile its for the uk but the network functions on all australian carriers this should fix your issue also go to the dialer and enter *#0011# is thr screen blank or filled with information if blank you are experiencing a certificate error or imei issue if it displays text when entered change the modem to AP SWREV B:2 firmware please feel free to private message me if you still need some help.
also quick questoin the combination FA_60_G930FXXU2ARA2 rom you flashed to the device did it actually boot ? As i have a G930F with knox tripped and for some reason the exact same combination rom will not boot at all on my device i get nad passed and provisioned and the blue status light but will not go any further and once restarted i get a console error.
Thanks
Matthew
mofazar said:
Same problem for me with my G935F, have you found solution?
---------- Post added at 01:36 AM ---------- Previous post was at 01:34 AM ----------
Same problem for my, on G935F. Have you found solution to fix it?
Click to expand...
Click to collapse
Just flash with this version
Sammobile 7.0 INS
your baseband version also repaird
then root
Then repair imei on Z3x (only orignal)
And then patch certificate
thats it....
Sorry for my bad English...
Hers the log..
Operation: Patch Certificate
Selected model: SM-G930F
Software version: 32.4
Waiting ADB device... OK
Reading phone info...
Model: SM-G930F
Android version: 7.0
PDA version: G930FXXS2DRCG
CSC version: G930FODD2DRAG
Phone version: G930FXXU2DRAG
Product code: SM-G930FZSUINS
CSC country code: India
CSC sales code: INS
Phone SN: RZ8J90V9S9B
IMEI: 358688xxxxxxxx8
HW version: MP 0.700
RF cal date: 20170909
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2018-03-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.32.4