I Have a G920I which is branded by an international carrier called Claro, Is there a way for me to flash just the non carrier version of the OS thru kies? I don't have root just want it debloated and Ive already disabled apps but don't want claro showing up upon startup also.
If this is possible, will OTA still work?
Hi,
I think it's safe to install a different country 920i firmware using Odin. I used to have Indian firmware on my Brazilian 920i and it still receives OTA without problems, since the device is still stock.
All the best,
~Lord
Sent from my Galaxy S7 Edge (SM-935F) using Tapatalk Beta
I have an unlocked Samsung Galaxy s7 but am unable to download the galaxy beta app. My model number is SM-G930FD.
Any help?
Because it's closed
vonedaddy said:
I have an unlocked Samsung Galaxy s7 but am unable to download the galaxy beta app. My model number is SM-G930FD.
Any help?
Click to expand...
Click to collapse
I was trying to download it in Japan and it's not available here
Sent from my SC-02H using Tapatalk
francisamarsingh said:
I was trying to download it in Japan and it's not available here
Sent from my SC-02H using Tapatalk
Click to expand...
Click to collapse
http://www.apkmirror.com/apk/samsun...y-beta-programme-1-0-00-android-apk-download/
jamorimpt said:
http://www.apkmirror.com/apk/samsun...y-beta-programme-1-0-00-android-apk-download/
Click to expand...
Click to collapse
Downloading and installing the APK wouldn't help so save yourself the time and trouble.
AFAIK, the beta program was suppose to end on Dec 15 anyways but even if it's still running, you cannot enroll in it because they reached the maximum number of beta testers.
In addition, the beta only opened for a small number of markets (UK, US, Korea) determined by the specific carrier's firmware (in case of the US SD820 variants) or specific CSC (for example the BTU variant of the SM-G930F)
At the moment the options you have are as follows:
1. The stable route - flash your device to the latest 6.0.1 release from the XSA (Australia) or BTU (UK) using ODIN - these seem to be getting the first rollouts of new versions - and wait for the official 7.x release which should arrive in the next few weeks - note: flashing a different CSC firmware may cause some carrier issues (lower speeds, loss of VoLTE and WiFi calling, etc..)
2. Flash the official ZPK1 (Beta 1) BTU Android 7.0 beta with Odin - it contains Nov 2016 security patches and has some quirks (and same note as before regarding the CSC )
3. Flash an unofficial ZPL3 based rom and trip knox (this may affect your warranty depends where you live) - not sure about CSC selection (I guess it varies by the ROM)
N-way said:
Downloading and installing the APK wouldn't help so save yourself the time and trouble.
AFAIK, the beta program was suppose to end on Dec 15 anyways but even if it's still running, you cannot enroll in it because they reached the maximum number of beta testers.
In addition, the beta only opened for a small number of markets (UK, US, Korea) determined by the specific carrier's firmware (in case of the US SD820 variants) or specific CSC (for example the BTU variant of the SM-G930F)
At the moment the options you have are as follows:
1. The stable route - flash your device to the latest 6.0.1 release from the XSA (Australia) or BTU (UK) using ODIN - these seem to be getting the first rollouts of new versions - and wait for the official 7.x release which should arrive in the next few weeks - note: flashing a different CSC firmware may cause some carrier issues (lower speeds, loss of VoLTE and WiFi calling, etc..)
2. Flash the official ZPK1 (Beta 1) BTU Android 7.0 beta with Odin - it contains Nov 2016 security patches and has some quirks (and same note as before regarding the CSC )
3. Flash an unofficial ZPL3 based rom and trip knox (this may affect your warranty depends where you live) - not sure about CSC selection (I guess it varies by the ROM)
Click to expand...
Click to collapse
Sure and I agree. Just replied to his request (not able to download the beta app)
Is there an ODIN flashable STOCK BETA 4 or 5 available for Samsung Galaxy S7 NOUGAT?
rasseru16 said:
Is there an ODIN flashable STOCK BETA 4 or 5 available for Samsung Galaxy S7 NOUGAT?
Click to expand...
Click to collapse
Hi
Check here
I have an unlocked US Cellular gs7 that I use on tmobile. The thing is I want android 7.0 which hasn't been yet released for this variant. Is there anyway I can flash something on my
SM-G930R to get android 7.0?
???
CoronaDabs said:
I have an unlocked US Cellular gs7 that I use on tmobile. The thing is I want android 7.0 which hasn't been yet released for this variant. Is there anyway I can flash something on my
SM-G930R to get android 7.0?
Click to expand...
Click to collapse
Yes you can, flash the latest tmobile firmware file via file odin. On the tmobile s7 forums are a lot of guides to show you this. Please note this will convert your us cellular s7 to a tmobile s7 (software wise)
Check this thread here:
https://forum.xda-developers.com/tm...wnload-t-mobile-s7-nougat-odin-files-t3558247
AT&T S9+ stock Oreo G965USQU1ARBI Odin files.
Model: SM-G965U
Model Name: Galaxy S9+
Country: USA
Version: Android Oreo 8.0
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: G965USQU1ARBI
CSC: G965UOYN1ARBI
Download here: G965USQU1ARBI
DOWNLOAD for ODIN:
ODIN v3.13.1
bboii86 said:
AT&T S9+ stock Oreo G965USQU1ARBI Odin files.
Model: SM-G965U
Model Name: Galaxy S9+
Country: USA
Version: Android Oreo 8.0
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: G965USQU1ARBI
CSC: G965UOYN1ARBI
Download here: G965USQU1ARBI
DOWNLOAD for ODIN:
ODIN v3.13.1
Click to expand...
Click to collapse
Can this be flashed on Sprint S9+ since it's Snapdragon as Well?
powerstroke said:
Can this be flashed on Sprint S9+ since it's Snapdragon as Well?
Click to expand...
Click to collapse
This is specifically for ATT. If you're looking for the latest sprint firmware for your device, it would be G965USQU1ARBG containing SPR USERDATA.
bboii86 said:
This is specifically for ATT. If you're looking for the latest sprint firmware for your device, it would be G965USQU1ARBG containing SPR USERDATA.
Click to expand...
Click to collapse
Ok thanks. Wasn't sure if I could throw the SPR USER DATA in with this firmware
Can I flash this on my unlocked SM-G965U1? I use AT&T as my provider. Also, if I needed can I go back to stock? Thanks.
I have an ATT S9 plus (already unlocked with codes from Ebay). So this flash will make my ATT ver become the Unlocked ver? I need the hotspot feature of the unlock ver. I don't need Wifi calling or VOLTE from ATT ver because I have never use those.
sweetboy02125 said:
I have an ATT S9 plus (already unlocked with codes from Ebay). So this flash will make my ATT ver become the Unlocked ver? I need the hotspot feature of the unlock ver. I don't need Wifi calling or VOLTE from ATT ver because I have never use those.
Click to expand...
Click to collapse
This firmware is 100% stock G965U AT&T. This is not the G965U1 unlocked firmware.
bboii86 said:
This firmware is 100% stock G965U AT&T. This is not the G965U1 unlocked firmware.
Click to expand...
Click to collapse
My bad. So I have the same version. Where is the U1 ver? thanks
sweetboy02125 said:
My bad. So I have the same version. Where is the U1 ver? thanks
Click to expand...
Click to collapse
This is the U1 version.
https://androidfilehost.com/?fid=818070582850506637
ilatimer1 said:
Can I flash this on my unlocked SM-G965U1? I use AT&T as my provider. Also, if I needed can I go back to stock? Thanks.
Click to expand...
Click to collapse
Yes you can flash this on to the Unlocked Model and will give you the Carrier specific features like Wifi calling.
monsterlag said:
Yes you can flash this on to the Unlocked Model and will give you the Carrier specific features like Wifi calling.
Click to expand...
Click to collapse
No it won't... I've flashed the G965U AT&T firmware on to 5UI unlocked with AT&T user data and both the home csc and regular csc files, and none of the carrier specific software works. Furthermore, you will limited to only 4G speeds during phone calls on the 5UI, at least with a AT&T sim card. This is my biggest pet peeve with this phone.
sinman02 said:
No it won't... I've flashed the G965U AT&T firmware on to 5UI unlocked with AT&T user data and both the home csc and regular csc files, and none of the carrier specific software works. Furthermore, you will limited to only 4G speeds during phone calls on the 5UI, at least with a AT&T sim card. This is my biggest pet peeve with this phone.
Click to expand...
Click to collapse
Where did you get the files from? Try Try using this with the ATT userdata
monsterlag said:
Where did you get the files from? Try Try using this with the ATT userdata
Click to expand...
Click to collapse
I used the files from this thread :
https://forum.xda-developers.com/galaxy-s9-plus/how-to/g965u-g965u1-firmware-links-t3763487
Unfortunately I don't have the time to try this again and fail, but I would love for someone to prove me wrong...
So can I flash the unlock version on my galaxy s9 plus Originally AT&T but is unlocked now
bboii86 said:
This is the U1 version.
https://androidfilehost.com/?fid=818070582850506637
Click to expand...
Click to collapse
Does This come with all the carrier Boatware?
Son Rise said:
Does This come with all the carrier Boatware?
Click to expand...
Click to collapse
If you mean unlocked Odin files the answer is no, No AT&T bloatware.
Sent from my Samsung Galaxy S9+ using XDA Labs
Venom0642 said:
If you mean unlocked Odin files the answer is no, No AT&T bloatware.
Sent from my Samsung Galaxy S9+ using XDA Labs
Click to expand...
Click to collapse
I have a Verizon and I wanna get rid of all the Verizon apps . SM-G965U is what I have. Maybe it will help my battery life too if I get all the Boatware removed
Sent from my SM-G965U using XDA Free mobile app
I don't know what I may have done differently, but did exactly what you did and I have everything working. Flashed AT&T rb7/rbg and user data over stock u1 firmware after factory reset. Volte/wifi calling, lte during phone calls and video calling work for me. I'm att/att/xaa, knox wasn't tripped.
The only thing I have as a complaint is it doesn't fetch ota's. So I have been reseting and Odin-ing updates as they roll out.
Thanks op for the files
jay2o01 said:
I don't know what I may have done differently, but did exactly what you did and I have everything working. Flashed AT&T rb7/rbg and user data over stock u1 firmware after factory reset. Volte/wifi calling, lte during phone calls and video calling work for me. I'm att/att/xaa, knox wasn't tripped.
The only thing I have as a complaint is it doesn't fetch ota's. So I have been reseting and Odin-ing updates as they roll out.
Thanks op for the files
Click to expand...
Click to collapse
No problem.
bboii86 said:
No problem.
Click to expand...
Click to collapse
@bboii86
Hope you do not mind me asking but I am new to Galaxy devices. Nexus/Pixel was always my choice but after having a bug filled Pixel XL 2 I decided to give the S9+ a shot. Not familiar with how the firmware for them work so I thought to ask you since you look to be very helpful in this thread.
I have T-Mobile S9+ which was updated to latest March 1 security update. I would like to flash it to the unlocked firmware. Is this https://updato.com/firmware-archive-select-model?record=182E00202C6211E89F15FA163EE8F90B the same unlock firmware you posted?
Would I be able to use WiFi Calling, HD Calling and all other features on T-Mobile with the unlocked firmware?
Thanks for the help!
since tmobile and samsung are taking their sweet time to update the software, i was curious if there's a way to update 930T version phone myself? i see there's rom available to flash via odin for 930F, but is there a way to do it on the T-Mobile version 930T? thanks!
Nope. These are 2 different versions.