As the title said you can now go down to ARB3
i dont own this video but it works well
https://youtu.be/L4nRqwUfzAg
Download PitchBlack for Note5 Pro/Ai (WhyRed)
https://sourceforge.net/projects/pi...red-2.9.0-20181003-2112-OFFICIAL.zip/download
Instructions
1.) Install Pitchblack recovery using TWRP
2.) Reboot back to recovery
3.) goto advance then additional then special
4.) open SETTINGS OTA and CHECK everything
5.) wipe all partition (except internal if you dont have sdcard)
6.) Flash any ARB3 ROM 9.2.x.x
7.) Wipe Cache/Dalvik and reboot
8.) once you see RESET PHONE boot back to recovery
9.) format data, cache and dalvik.
10.) enjoy. jumping up and down
This is the same as flashing firmware less roms from AL IRAQI's thread on any custom recovery. This will not change your ARB4 bootloader to ARB3. What pitchblack recovery's doing is not flashing the firmware partitions.
Missleading title, please remove in this section
Sent from my Redmi Note 5 Pro using XDA Labs
i downgrade from 10 to 9
by this recovery and work fine
Related
How to flash CLEAN flash roms - This is how I flash roms(even updates of the same rom) and the method i recommend to users. It is better to take 10 mins to set your phone again rahter than wasting more time to fix issues that could have been avoided by a clean flash.
NOTE- This is a MUST when changing roms.
1. Backup EFS
2. Make a nandroid backup in recovery
3. Wipe data/factory reset
4. Wipe system
5. Wipe cache
6. Wipe dalvik
7. Flash ROM
8. Flash gapps(if flashing an AOSP ROM)
9. Flash kernel(optional)
10. Reboot
11. Wait 10 mins, then do another reboot
12. Enjoy
How to DIRTY flash roms - This method is used by users when flashing a update of the same rom.
NOTE- Some users follow this and some just flash the rom without wiping anything.
Note- If you flash rom that has aroma installer you will need to edit the updater script to make sure the aroma doesn't wipe system before flashing rom.
1. Backup EFS
2. Make a nandroid backup in recovery
3. Wipe cache
4. Wipe dalvik
5. Flash ROM
6. Flash gapps(if flashing an AOSP ROM)
7. Flash kernel(optional)
8. Reboot
9. Wait 10 mins, then do another reboot
10. Enjoy
How to SUPER CLEAN flash roms - This is the method that I recommend to your that have weird issues, even after clean flashing.
NOTE - If you dont know how to Odin the stock FW(firmware), read this guide.
NOTE - Make a backup of your internal sdcard and save rom/gapps/kernel/etc on external sdcard.
1. Backup EFS
2. Make a nandroid backup in recovery
3. Odin the stock FW(firmware) for your device, the phone will boot into the OS
4. Boot into download mode and flash a custom recovery, I recommend TWRP
5. Wipe internal storage
6. Wipe data/factory reset
7. Wipe system
8. Wipe cache
9. Wipe dalvik
10. Flash ROM
11. Flash gapps(if flashing an AOSP ROM)
12. Flash kernel(optional)
13. Reboot
14. Wait 10 mins, then do another reboot
15. Enjoy
Sent From My SM-N9005 To All You Wonder Nobodies!!
How to flash flash kernels - Many users say to wipe cache/dalvik but it's useless as neither if their partitions are affected when flashing a kernel.
1. Boot into recovery
2. Flash kernel
Sent From My SM-N9005 To All You Wonder Nobodies!!
Finally, the easiest and most important thread Imo.
Keep up the good work mate.
Sent from my SM-N9005 using XDA Premium 4 mobile app
fahadali2315 said:
Finally, the easiest and most important thread Imo.
Keep up the good work mate.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your support bruv.
Sent From My SM-N9005 To All You Wonder Nobodies!!
:good:
This is a long typo on note 3.
Can't imagine, with 289dpi some more
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
:good:
This is a long typo on note 3.
Can't imagine, with 289dpi some more
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
Haha actually I typed most of this on PC but emailed it to myself as I was leaving but wanted to edit it some stuff...So the end product was posted by cell.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
ahmed2014011 said:
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
Click to expand...
Click to collapse
Could you please supply direct links, ppc links are not allowed on xda
Regards
Sawdoctor
Step by Step Installation of/Upgrade to Android Pie Custom Roms
Following this guide, you will lose all your data if haven't backed it up yet!!
Also NO USING GSI PIE!!!
Requirements:
- Twrp is already installed.
What you need:
- LineageosTWRP (Attached to thread)
- Custom Rom (can be found here)
- Open Gapps (Pico or Nano)
Only if Root is wanted: Chose either of them
Magisk(Recommended) or SuperSU
- A brain and a body
- The Knowledge that you will wipe your phone by doing this. Be Warned.
Installation:
1. Backup all the files that you have either by copying them to a usb drive ,a micro SD or your computer.
2. Check that all files are copied successfully and can be opened or viewed.
( Some apps have a cloud synchonisation feature, use it if you have it as an option since it is really helpful!)
3. Now, get your preferred rom, gapps and if wanted, your root method ready, also unzip the twrp file aswell.
Copy them to your micro SD.
4. Boot into twrp via adb or by using some app(root needed).
In Twrp, go into wipe option, then select change file system. Change file System to ext4.
4.1 Now use Twrp Reboot-Menu Option to reboot into recovery(twrp) again.
4.2 Wipe system, data, cache and dalvik-cache partitions using the Wipe option
5. Go into Install Option and Press on "Install IMG" , select pietwrp image and flash it. (The name should be lineagerecovery.img or something if downloaded via telegram)
(If you don't have it yet and are in the Lenovo P2 Telegram group, type #pietwrp in chat and make sure to safe it to your download folder. Otherwise it's also attached to this thread.)
6. Reboot back to recovery like you did in step 4.1.
7. Now install your rom and gapps.
8. Wipe cache and then reboot .
9. Setup your phone and Enjoy.
( For Root, reboot to recovery. Flash your Root Method, wipe cache and reboot)
Enjoy and thank your Devs
FAQ
Q: Instructions unclear, phone stuck in bootloop
A: Either do this:
Download this folder and use one of the two ".bat" files. Boot into Bootloader via Volume Down and Power Button. --
It will flash S048 Firmware of our Lenovo P2, after the flash-process is finished it will boot up on its own. Recommended: Do all the ota updates via ota app.
Or: Boot into bootloader, via adb cmd prompt use: fastboot boot lineagerecovery.img , then use reboot menu to reboot into twrp. Clean Wipe phone(Wipe system,data, cache and dalvik-cache Partitions) and try flashing your Rom etc. again.
Q: Instructions unclear, hardbricked my phone!!
A: Thaat shouldn't have happened. Did you screw up somewhere?...
Luckily you backed up your most important files!
Here is Simple guide for Flashing Every Android Pie or 10 on Decrypted Device..
Here I Prefer to Make Guide On Decrypted Device only Because Decrypted Device Giv's more flexibility while Switching ROM's.
Reasons are simple.. Flashing ROM over Encrypted device might Loose data if anything goes wrong..
For Decryption, Follow @HatRiGt Guide..
https://forum.xda-developers.com/oneplus-6/how-to/tutorial-decrypt-flash-rom-pie-oreo-roms-t3838643
Now Here is Steps to follow
When Flashing New ROM
Download OOS(Beta), TWRP 3.3, ROM, Gapps, Magisk 20, No-Verity-Treble zip & Copy them into Device
Reboot Into Recovery
Wipe > Advanced Wipe > Select Cache, System & Data & Swipe to wipe it
Flash OOS, TWRP & Reboot to Recovery
Flash OOS, TWRP Again & Reboot to Recovery
Flash ROM, TWRP & Reboot to Recovery
Flash Gapps, Magisk, No-Verity-Treble & Reboot to System
Done
When installing New Update
Download ROM Update ZIP, TWRP 3.3,, Gapps, Magisk, No-Verity-Treble zip & Copy them into Device
Reboot Into Recovery
Flash ROM, TWRP & Reboot to Recovery
Flash Gapps, Magisk, No-Verity-Treble & Reboot to System
Done
Few Point's to highlight
1. This Guide is Strictly for Decrypted Devices..
2. Follow Exactly Same Steps & Flash Exactly same ZIP's for avoid Potential data loss..
3. Flashing Magisk is totally upto you. Flash it if you want to keep rooted(You migh need it if you pay Google Pay as SafetyNet not passing on Android 10 & need module to fix it)..
4. Use No-Verity-Treble zip only from this Post as One Given in @HatRiGt Guide is only for Pie Based ROM's.. Attached ZIP is Working on Both Android 9 & 10.. Don't complain/Blame me if you did something wrong..
<Mod edit - removed>
Requirement:
Gsi Download arm64-ab or bvN (on some download page)
For ColorOs Base
Twrp COS
Gsi Flash files
Stockboot.img
For RealmeUi Base
Twrp RMUI
Gsi Flash files
Stockboot.img
Installation
1.Reboot to Twrp
2.Factory reset device from Wipe >> Slide>>>
3.Format data from Wipe >> Format data>> Type Yes
4.Flash RMC2decryption.zip
5.Go to Advance wipe & wipe
dalvik, data, cache, internal storage & system
Do Not Wipe Vendor partion
6. Goto install & select install image from bottom right
7. Flash stockboot.img as boot
8. Flash (gsi filename).img as system image
9.Flash vbmeta.img as vbmeta (Download as per base)
10.Flash Deletebootanimation.zip (Read Note First)
11.Flash keystore.zip
12.Format data from wipe bottom right
13.Flash permissiver.zip (skip for RMUI)
14.Reboot System
Note:
only some gsi boot with bootanimation if device bootloop from bootanimation flash deletebootanimation.zip
if deletebootanimation.zip doesnt work delete file manually
System/system/media or system/system/product/media
Optional
For Root flash Magisk 20.3
(in phh based gsi Normal magisk.zip doesn't works)
Rooting on Android 11
make sbin folder in /system & /system_root/system then flash magisk zip
For discussion join
https://t.me/RealmeC2Community
For Gsi Fix follow #gsifix
For Modified Bootanimation #gsibootanimation
realme c2 color os v9.
what will I press in the last step 'do not install twrp' or 'reboot system' only ??
GSI AOSP Android 10
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:
Rj clno said:
what will I press in the last step 'do not install twrp' or 'reboot system' only ??
Click to expand...
Click to collapse
always do not install twrp app
Shinnosuke Nohara said:
I've tried to open the GSI list you provided.
And I got confused which one do I have to download/pick and which file.
Do you have any recommendations for Android 10 stock AOSP?
Thanks in advance.
Cheers. :fingers-crossed:
Click to expand...
Click to collapse
arm64 a/b or arm64 bvn/bgn v=vanilla g=gapps
I’ve downloaded the arm64 a/b gapps and go. I’ll try it later. Then I will tell you if I find any bugs and then upload the logs. Where should I upload it?
I am using :
system-roar-arm64-ab-gapps.img from here
TWRP 3.5.0_9-1 SIDDK
ColorOS GSI
adb version Version 30.0.5-6877874
I can't make it run. It loops in opening screen RealmeME (white logo) not Yellow font..
I still can boot to fast-boot mode and call twrp recovery.
Somebody can help me?
many thanks in advance
hey i am using the stock color os 9 on my rmx1943 it similar to rmx1945 yiu think i could use the old stockboot file for it on sourceforge
i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk
patrickbusto081302 said:
i'm getting an error whenever i'm trying to flash keystore for rmui. what should i do @Siddk
Click to expand...
Click to collapse
everything fine with keystore make sure u using latest recovery & using A10 keystore
Ahh...booting into recovery even if i press system
@arksolitude is that because you are trying to install android 10 for realme c2? if yes...
1. download stockrecovery.img (or get the recovery.img from the zip file you've downloaded)
2. reboot to bootloader/fastboot
3. type in your computer "fastboot flash recovery (name of the file).img"
4. reboot (this will take you to stock recovery)
5. wipe data and reboot
this is from my experience but this should work