Database Info

[Resolved] Trouble shoot for Xolo Era X and 4G Twrp installation.

Hello Everyone -
Welcome back , In previous post i explained " How to install twrp and root Xolo Era X,4G" but i forgot to mention some things which resulted errors for many users making it non-beneficial , I mean wasted time , data , or may be the android rom. Thanks for describing problems in previous post.Now it's mine turn to return you something original , something good .Search your question answers here and problems.
Please note that this thread is only for Xolo era X , 4G marshmallow 6.0 version only , 5.1 is not supported .Sorry but update to 6.0.
1. `adb` is not recognized as an internal or external command
Ans - If you are facing this error then probably you are not in the folder where adb and fastboot tools are installed .
You have to open command prompt only where adb tools,drivers are installed.Still not solving then google it.
2. adb devices = blank (nothing is shown)
Ans - I think you have either not connected your smartphone with usb debugging on or you have not installed proper version of adb and fastboot drivers.Please google for different versions of adb and fastboot.
3. fastboot devices = blank (nothing is shown)
Ans - Same as in above answer.
4. fastboot flash recovery recovery.img = <waiting for device>
Ans - It means that you have not installed fastboot drivers properly or you have not connected your devices in fastboot mode.
5. fastboot flash recovery recovery.img = no such file found or recovery.img not found.
Ans - You have not copied or moved recovery.img(twrp or cwm image file) in the folder where adb and fastboot are installed .So put the recovery.img (it can be twrp.img or somename.img) in the adb and fastboot tools folder(it can be either found in local drive C or at any custom location) .
6. Recovery Installed successfully but still booting in stock recovery or Computer shows installation successful but still opens stock recovery.
Ans - This is a great problem for many users and it is happening due to security policies of android 6.0. To fix it Do as following-
(1) Install twrp recovery and when it say success plug your battery out .
(2)Put battery back and open smartphone in recovery mode by holding VOL Up + Power Button for 15 seconds.
(3)Now your smartphone will boot in TWRP recovery but your twrp recovery is still temporary .
(4)Install SuperSu.zip by twrp recovery and this zip file will patch boot.img and system files.
(5)After installation of zip file reboot your smartphone .
(6)Your smartphone will restart 2-3 times and finally will boot .
(7) Finally you have rooted your smartphone and installed TWRP permanently .Now install busybox and enjoy.
Note: Please Select Expert Mode when you open SuperSu app first time after this process(you will be asked by SuperSu app to select two modes 1 Expert , 2 New User ; always select Expert or root will not function properly).
I hope you got what you wanted . If i helped you then please Subscribe , like and share also Hit thanks here on xda.
Download SuperSu zip from here - https://drive.google.com/open?id=0B_Mx_zMB6YZOUENHdHpDTXZucXc

Finaly
ankitnandgavia said:
Hello Everyone -
Welcome back , In previous post i explained " How to install twrp and root Xolo Era X,4G" but i forgot to mention some things which resulted errors for many users making it non-beneficial , I mean wasted time , data , or may be the android rom. Thanks for describing problems in previous post.Now it's mine turn to return you something original , something good .Search your question answers here and problems.
Please note that this thread is only for Xolo era X , 4G marshmallow 6.0 version only , 5.1 is not supported .Sorry but update to 6.0.
1. `adb` is not recognized as an internal or external command
Ans - If you are facing this error then probably you are not in the folder where adb and fastboot tools are installed .
You have to open command prompt only where adb tools,drivers are installed.Still not solving then google it.
2. adb devices = blank (nothing is shown)
Ans - I think you have either not connected your smartphone with usb debugging on or you have not installed proper version of adb and fastboot drivers.Please google for different versions of adb and fastboot.
3. fastboot devices = blank (nothing is shown)
Ans - Same as in above answer.
4. fastboot flash recovery recovery.img = <waiting for device>
Ans - It means that you have not installed fastboot drivers properly or you have not connected your devices in fastboot mode.
5. fastboot flash recovery recovery.img = no such file found or recovery.img not found.
Ans - You have not copied or moved recovery.img(twrp or cwm image file) in the folder where adb and fastboot are installed .So put the recovery.img (it can be twrp.img or somename.img) in the adb and fastboot tools folder(it can be either found in local drive C or at any custom location) .
6. Recovery Installed successfully but still booting in stock recovery or Computer shows installation successful but still opens stock recovery.
Ans - This is a great problem for many users and it is happening due to security policies of android 6.0. To fix it Do as following-
(1) Install twrp recovery and when it say success plug your battery out .
(2)Put battery back and open smartphone in recovery mode by holding VOL Up + Power Button for 15 seconds.
(3)Now your smartphone will boot in TWRP recovery but your twrp recovery is still temporary .
(4)Install SuperSu.zip by twrp recovery and this zip file will patch boot.img and system files.
(5)After installation of zip file reboot your smartphone .
(6)Your smartphone will restart 2-3 times and finally will boot .
(7) Finally you have rooted your smartphone and installed TWRP permanently .Now install busybox and enjoy.
I hope you got what you wanted . If i helped you then please Subscribe , like and share also Hit thanks here on xda.
Download SuperSu zip from here - https://drive.google.com/open?id=0B_Mx_zMB6YZOUENHdHpDTXZucXc
Click to expand...
Click to collapse
Wahooooooo I it happened. Its done TWRP flashed successfully n my phone Is rooted. Big thanks to you and Murali Dharan and that's how it's done. Here is some point
Es file explorer can't excess root of my phone even if I hit allow.
All other root app are working fine
Can I reflash super user zip of kingo root I am asking coz there was additional files with superuser files u provided to fix twrp
I have lost ur channel put links n I will like n subscribe

CheifX said:
Wahooooooo I it happened. Its done TWRP flashed successfully n my phone Is rooted. Big thanks to you and Murali Dharan and that's how it's done. Here is some point
Es file explorer can't excess root of my phone even if I hit allow.
All other root app are working fine
Can I reflash super user zip of kingo root I am asking coz there was additional files with superuser files u provided to fix twrp
I have lost ur channel put links n I will like n subscribe
Click to expand...
Click to collapse
Hii ,
When you open SuperSu app first time , Please select Expert Mode otherwise root will not work even after granting permission.

ankitnandgavia said:
Hii ,
When you open SuperSu app first time , Please select Expert Mode otherwise root will not work even after granting permission.
Click to expand...
Click to collapse
Hallooooo!
I have already selected expert mode and other root apps working perfectly fine.

CheifX said:
I have already selected expert mode and other root apps working perfectly fine.
Click to expand...
Click to collapse
Then please update or install busybox or you have to restart device after installing busybox or try changing es explorer app version..Es file explorer with root is working fine in mine smartphone.

ankitnandgavia said:
Then please update or install busybox or you have to restart device after installing busybox or try changing es explorer app version..Es file explorer with root is working fine in mine smartphone.
Click to expand...
Click to collapse
I will try busybox later what about reflashing kingo root supperuser.

Es explorer root mot work in xolo era 4g ..same with me........can u provide cwm for my phone 5.1....plzzz

CheifX said:
I will try busybox later what about reflashing kingo root supperuser.
Click to expand...
Click to collapse
Flashing kingo root superuser is not a bad idea, you can try it but be aware of risks so take a backup through TWRP.You can try anything new after taking backup,if something goes wrong then restore your backup.Good luck.

Need latest twrp recovery
I want the latest version of recovery for xolo era 4g and want some custom roms....plz make it.....plzz

I'm facing an issue with the OEM Unlock toggle in developer options. When I toggle it On and select OK for the pop-up box that comes. It automatically disables it. Can u help me out with this and tell me why I'm facing this issue?

yes.. i was too facing this problem but if u are trying to install custom rom then u can flash 5.1 version through SPD Upgrade Tool and then toogle that option then install ur custom rom...
no option is there!

[ROOT][RECOVERY]Asus Zenfone Max ZC550KL Qualcomm Snapdragon 615 MSM8939

Guide for rooting and Twrp installation for Zenfone max ZC550KL 615 MSM 8939 :
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
FILES NEEDED
DRIVERS\TOOLS
a. adb setup; http://www.mediafire.com/file/jsbx6isfpgle319/adb-setup-1.4.3.exe
b. Android usb drivers ;http://www.mediafire.com/file/57fzehmcfqk0y7t/ASUS_Android_USB_drivers_for_Windows_20150212.zip
c.minimal adb and fastboot : http://www.mediafire.com/file/0h36wb7e8aoimvb/minimal_adb_fastboot_v1.3.1_setup.exe
d. Asus bootloader unlock tool for 8939 device : http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
TWRP\ROOT FILES
e. custom recovery image file (Twrp) :
https://www.mediafire.com/file/1kyk0q3b99kcrue/Twrp_3.0.2.img
f. SuperSU file (root) : http://www.mediafire.com/file/dchiph3qkml3u8g/PRO-SuperSU-v2.67.zip
STEP BY STEP GUIDE
1. Download and install adb and Android usb drivers if you don't have them already installed, otherwise, you can skip
2. Download and install minimal adb and fastboot and put icon on desktop
3. Download the Asus bootloader unlock tool .apk file to your device and install like an application in order to unlock bootloader(follow on-screen messages)
4. Boot device into CSC MODE(fastboot\bootloader) and connect to PC via usb cable. (To boot into CSC MODE , press and HOLD "volume up key+power key")
5. open minmal adb and fastboot and enter the following commands:
Code:
[COLOR="Red"]fastboot devices[/COLOR]
hit enter on keyboard and the serial number of your device SHOULD show in minimal adb window, if it does'nt then you've not installed your Android usb drivers correctly !
Code:
[COLOR="Red"]fastboot flash recovery[/COLOR]
after this command press the SPACE KEY ON KEYBOARD AND DRAG THE "CUSTOM RECOVERY IMAGE FILE TO THE MINIMAL ADB WINDOW then hit the enter key on your keyboard and Twrp will be flashed .
IMPORTANT !!
After flashing the TWRP file, you should boot directly into recovery by holding VOLUME DOWN+POWER BUTTON do not allow device to boot into home screen at first boot, otherwise stock recovery will be restored !!!
6. After booting into TWRP , FLASH THE ROOT FILE IMMEDIATELY !
WARNING !
if you don't flash the root file once in twrp, you might encounter a bootloop!
some users report a password prompt while in Twrp, just press "cancel" then go to twrp home screen , WIPE-FORMAT DATA, after formatting data , go back to twrp home screen -REBOOT-RECOVERY , after that flash the root file (make sure your root file is on an external sd card .

Just followed instructions word by word and successfully rooted my Asus Max SD 615 !
Thanks !:good:

Plez upload video..
Please upload video for how to root,twrp and adb installing..because i m a android beginner.

Nandha2335 said:
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Click to expand...
Click to collapse
Well i guess if you follow it step by step there won't be any problem.If you get stuck at some point just comment here.And installing adb is just like the normal installation of any setup files in windows.Regarding the flashing of twrp there is nothing much to do than the steps mentioned above.If you still need a video go for this.https://youtu.be/kmq2Eyzl3wA NOTE:This video makes use of files for the sd410 model,so don't use the files in that video.Get the files from this post.This video can make you familiarize the process,but steps mentioned here is slightly different.

Nandha
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..

Nandha
Thank u so much bro ..i m following as per u r procedure now my mobile was rooted ...

Nandha2335 said:
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Click to expand...
Click to collapse
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).

Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193

jide1 said:
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
Click to expand...
Click to collapse
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Bro how to change notification panel ..and status bar

Nandha2335 said:
Miui 8 rom properly working or not
don't ask me, i didn't post any rom here, ask him https://forum.xda-developers.com/showthread.php?p=73339833
Click to expand...
Click to collapse

Nandha2335 said:
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Bro how to change notification panel ..and status bar
Click to expand...
Click to collapse
Try using gravity box after installing xposed framework.There a lot of graphical tweaks in gravity box.

Internal Storage Files Missing
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.

Place the root file on an external sd card.

jide1 said:
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Click to expand...
Click to collapse
Thank for your fast reply. By following your steps, I was successful in rooting the phone but when rebooting back to home screen, the black screen's still there.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
I guess you have copied the super su file to external sd card.Formatting data as mentioned by jide1 did remove the encryption for me.If it doesn't work do advanced wipe with only the data,cache and dalvik cache boxes checked.Note:don't check any other box.Then reboot into twrp.Go to mount in twrp and see that your external sd is mounted.Now access the external sd card in install option and you will find the files of super su.

How to get into twrp recovery?
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost

6goyal said:
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
Click to expand...
Click to collapse
Flash twrp again ,disconnect usb cable from pc, then press and HOLD "volume down" AND "power button" when device vibrates, RELEASE "power button" WHILE still holding "volume down" , that should do the job.

Need stock boot.img
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.

Volker802 said:
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Click to expand...
Click to collapse
Download the official firmware from Asus website and unpack the zip file, and you'll see the boot.img file there.

Infinix Zero 5/Zero 5 pro (X603) TWRP Recovery 3.1.1 With OTA Support

Touch is Working Now. (Finally) with OTA Support only for zero5 indian varient
Join Telegram group for further development : https://telegram.me/infinixzero5
This is Ported TWRP Recovery from a same Mt6757 chipset model. which i used to port it for our Infinix X603.
Thanx @topjhonwu for magisk.
Thanx for @majorkid for making OTA supportable
TWRP for non indian and global version for necessary changes. (Need to test)
Warning:-
I am not responsible for bricked devices.
Your warranty will void now. Do it at your own Risk.
Unlocking Bootloader
- Make sure your Bootloader is Unlocked. If already unlocked jump to how to flash.
Process to unlocking.
1. go to settings/about phone/build number (tap build no for 7 time now developer option available in settings)
2. go to developer option turn on usb debugging and OEM unlocking.
3. then go to pc download and extract and copy adb fastboot driver folder in Drive C. (or install form net.)
4. Go in fastboot folder which is copied to C. press and hold shift key on your key board and click right key on your mouse it will show option open cmd here or open power shell window here.
5. Click it, A cmd or power shell window will open.
type "adb devices" - it show some no of your device just give permission from your phone screen)
type "adb reboot bootloader" your phone reboot in bootloader mode.
type "fastboot oem unlock" follow onscreen instruction on phone, press volume + to confirm. thats it but it will erase all your data.
Reboot phone by pressing power button for 10 sec. setup it as temporarily.
Flashing of TWRP
1. Download the Latest TWRP Recovery Image and extract it (Attached). Use correct version for your device for OTA support.
For India (Indian) For Global (Global)
(Insert a SD card in your phone to take stock boot.img backup it will required for OTA in Future.)
2. Go in adb fastboot folder which is copied to C. copy twrp_recovery.img here then press and hold shift key on your key board and click right key on your mouse it will show option open cmd here or open power shell window here.
3. Click it, A cmd or power shell window will open.
4. Flash it via fastboot cmd (fastboot flash recovery Twrp_recovery.img) don’t use bracket.
It will flash recovery on your phone. Now type fastboot reboot in cmd window and press and hold vol+ button and hit enter.
Phone will reboot in twrp recovery.
Note : After flashing first time it will ask for password due to phone is encrypted.
a. just cancel it and allow to modify system by swiping arrow at down and select 2nd last option at right side then select globe icon on right and chose your language English.
(First take Boot.img backup Via backup option in TWRP in SD Card. (bcz internal storage shows 0 mb here at this movement.) It will use for OTA so save it.
b. then flash magisk manager.zip file attached here. (it will remove dm-verity and force encryption from boot.img) and give root access.
c. then go to Wipe and select format Data it will erase all data on your internal storage. remember it will erase your data in ext4 format so go to wipe advance select data and change file system to f2fs. Ext4 data not supported by kernel so you got loop to recovery so It must to repair data in f2fs.
d. Done Reboot to recovery and you got mounted storage.
Another Method.
- Flash it via SP flash tool. (use version 5.1744 recommended)
How to use SP flash tool :
Install Vcom media tek driver on your pc.
More detail and download available on following link
https://spflashtool.com/
IF ANYONE GOT LOOP IN BETWEEN TO RECOVERY MEANS PROCESS NOT FOLLOWED PROPERLY.NOT BOOTING PHONE JUST FLASH STOCK RECOVERY. YOUR PHONE WILL BOOT THEN DO PROCESS AGAIN.
OTA-
1. When ota available just download it. Don’t start flashing.
2. Location of OTA downloaded file in Root so use any root file explorer.
3. File can be found in :-
a. Root/cache/update.zip
b. Root/data/data/com.google.android.gms/app_download/update.zip
4. Copy file name is update.zip to your sd card or phone memory.
5. Reboot to recovery and flash first stock boot.img which you already taken backup and saved before when flashing twrp.
6. now flash update.zip via TWRP (dont reboot after flashing otherwise you will currept your system)
7. After flashing update.zip, first again take backup of your boot.img for future ota update.
8. After taking backup of boot.img flash magisk.zip and reboot. (If you did not flash magisk then your data again encrypted and u lose all data)
6. Done you are on latest version.
Note:- Always remember to flash magisk.zip at last before reboot.
OTA SUPPORTABLE TWRP Link for zero 5 global varient by @majorkid -
https://androidfilehost.com/?fid=890129502657578792
OTA SUPPORTABLE TWRP Link for zero 5 pro global varient by [MENTION=7078341]majorkid[/
https://androidfilehost.com/?fid=890129502657578807
Update: Last updated on 27/01/2018 (With almost all stock stuff with OTA support)

Thank you for your efforts I don't know why but it didn't work (i searched and downloaded alot and it's the only recovery that gave me a response but the screen was flipped and the touch was disabled, also the stock recovery is working well)

XDAdeveeloopers said:
Thank you for your efforts I don't know why but it didn't work (i searched and downloaded alot and it's the only recovery that gave me a response but the screen was flipped and the touch was disabled, also the stock recovery is working well)
Click to expand...
Click to collapse
flip screen was old but i updated it with working twrp. is it showing vernee mix 2 name on top?
can you send screen shot.
its working perfectly.
just match the zip size which you downloaded (if it is 13.23 mb then it is old)
download current version attached above is 15.31 mb in size.
Screen Shot is also updated
Let me know your success.............................

flipped screen fixed !
Ok, now it's not flipped but the touch is still disabled
again, thank you for your efforts. I've attached the screenshots. it tells me to enter the password but the touch is disabled and i couldn't type anything.

At this stage only cancle button will work. Dont type anything just press cancle button.
It shows next screen.
I chek if issue is there.

Cancle is not working too

XDAdeveeloopers said:
Cancle is not working too
Click to expand...
Click to collapse
just use it as temp. bcz after flash touch not working.
Touch is disabled in kernel for recovery partation by infinix.
for temp use cmd.
fastboot boot recovery.img
will update soon..........

when i connect my mouse via otg or flash it temporarily it works fine except that it shows that the internal storage is 0mb and when i try to install something it tells me that it's unable to mount /data as rw
also can you tell me how to get the password required in the first screen ?

XDAdeveeloopers said:
when i connect my mouse via otg or flash it temporarily it works fine except that it shows that the internal storage is 0mb and when i try to install something it tells me that it's unable to mount /data as rw
also can you tell me how to get the password required in the first screen ?
Click to expand...
Click to collapse
Read OP carefully. You need to format data partition completly first time and need to patch boot img via lazy flasher.
Showing 0mb bcz it is encrypted. You can use memory card.
If you want root then go for magisk root till recovery updated.

OK, now I removed the encryption, installed magisk and the root worked but when I try to install busybox and some other apps it doesn't work. When I try to install supersu zip it doesn't work (extracting ramdisk failure aborting) , isn't there any way to install supersu in order to get apps working correctly?

XDAdeveeloopers said:
OK, now I removed the encryption, installed magisk and the root worked but when I try to install busybox and some other apps it doesn't work. When I try to install supersu zip it doesn't work, isn't there any way to install supersu in order to get apps working correctly?
Click to expand...
Click to collapse
which busybox your trying and what error.
currently supersu have some error with new devices. which version you tried it should be 2.82 or above.

I downloaded SuperSU-v2.82-201705271822.zip
Busybox pro 61
MagiskManager-v5.4.3.apk

XDAdeveeloopers said:
I downloaded SuperSU-v2.82-201705271822.zip
Busybox pro 61
MagiskManager-v5.4.3.apk
Click to expand...
Click to collapse
Use busybox form playstore stericson.

I downloaded both free and pro versions of stericson's busybox and neither of them worked.
Also I downloaded supersu 2.82 and it also didn't work.

Finally the Touch is updated and working now.
I enabled touch in kernel which is disabled for recovery partition.

XDAdeveeloopers said:
I downloaded both free and pro versions of stericson's busybox and neither of them worked.
Also I downloaded supersu 2.82 and it also didn't work.
Click to expand...
Click to collapse
System is encrypted.
Use magiskmanager beta 14.5 or flash lazyflasher via twrp then one time you need to wipe data partition.
Always remember when you flash orignal boot.img you need to flash lazyflasher or magisk otherwise your system will become encrypted again.

Thank you, now touch is working perfectly <3

XDAdeveeloopers said:
I downloaded both free and pro versions of stericson's busybox and neither of them worked.
Also I downloaded supersu 2.82 and it also didn't work.
Click to expand...
Click to collapse
you can use ndk busybox from magisk app there is option download module.
But currently there is problem with module with this phone. the data partition is in F2FS format and its kernel is not handling f2fs properly.
TWO option for use magisk module.
1. wait for kernel update via infinix. or
2. format data partition as Ext4 from twrp.
Super su does not work correctly with f2fs currently.

But when I format data partition it resets my phone

XDAdeveeloopers said:
But when I format data partition it resets my phone
Click to expand...
Click to collapse
yes formatting data will reset it.

Japanese S7 Edge SCV33/SC-02H Magisk root and other tweaks!

This thread is for Japanese s7 edge scv33 that’s being booted up with SC-02H firmware after carrier unlocking.
This guide covers/ will help you
• Install Latest available Twrp recovery (Caution: will Trip Knox!)
• Magisk Root
• Remove Japanese carrier bloatwares.
• Make the default device language to English.
• Install latest available updates via default or, will add additional useful Samsung apps (will update the device stock apps like SMS, Touch wiz launcher, AOD, Contacts, etc to latest available.
• Various tweaks like sms delivery options turned on by default, always on display turned on by default etc-etc.
Overall, this guide is to help your Japanese S7 Edge scv33/SC-02H to look more like a standard international model.
So let’s begin.
Step 1:
All required files can be downloaded from here
https://drive.google.com/open?id=1XElzbRcvlqf1CXjGK8Oiu6rmlnAvcphY
Caution. Backup all of your personal data. This process will need you to factory reset or will erase all of your data including your personal photographs, apps, videos etc.
You will also require to have a fresh piece of sd card (16 gb or more recommended) to store the twrp nandroid backup if anything goes wrong.
So, First, you will need to remove the modifications that were made to your device stock boot image. If you have flashed the modified kernel or have rooted using super-su, then, you will need to undo all the changes. You can flash the stock boot image file only but I would recommend you to flash the whole latest firmware that you can find easily over UPDATO Firmware website to start better all over again.
Here is the link to the latest SC-02H android 7.0 firmware:
http://updato.com/firmware-archive-select-model?record=AD3D69507E2D11E7963AFA163EE8F90B
Download and extract it. You will find 5 files. You can ignore the HOME……. file. Flash the 4 firmware file using latest Odin.
After flashing, let it boot up. Finish the setup wizard and turn off the device.
Step 2:
Flash the TWRP that you downloaded from here. Download Link is same as above.
https://drive.google.com/open?id=1XElzbRcvlqf1CXjGK8Oiu6rmlnAvcphY
Twrp Bug: Device will reboot to twrp recovery if you choose to power down the phone from recovery option. You will have to choose “Reboot System” from twrp menu to solve this.
After installing, boot into twrp recovery. Go to Wipe and at the bottom right, you will have option to format data. Perform a Format data process. Then, make a TWRP backup to your sd card.
I repeat. Make a backup. This will help u a lot if anything goes wrong
Step 3:
Time to install magisk.
Extract root.zip file and there you’ll see magisk.zip
Flash this magisk installer file from twrp and reboot the device.
Install the latest magisk manager app apk.
Now your device is rooted with the latest magisk available.
Step 4:
Time to remove the bloatwares.
You will need ES file manager and System app remover from playstore.
Grant super-user access to both apps. Navigate to device/system/preloadFactoryResetOnly using es file manager and delete all the contents inside that folder.
Download the apps.zip file from here
https://drive.google.com/open?id=1XElzbRcvlqf1CXjGK8Oiu6rmlnAvcphY
Extract it to your pc. Copy all the extracted apps including their folder to your device and paste it inside the same path i.e, device/system/preloadFactoryResetOnly folder.
Important: You will need to change the copied each app file permission to RW-R-R.
You do-not need to change the folder’s permission. But you will need to change the each apk’s permission one by one. Long press on the apk and then go to properties. Tick mark on (read-write, read, read).
But there will still remain some Japanese DoCoMo bloatwares. You will not be able to remove it by simply using system app remover.
So, use the system app remover app to track down the bloatware’s location by long pressing and delete it by using es file manager. Remember, only delete the bloatwares that are found in device/system/priv-app and device/system/app folders.
Caution:
You do-not need to super trim down your system in hopes for getting more internal space or whatsoever by deleting the bloatwares that you don’t know. Just delete the DoCoMo apps that you can see in the app drawers.
So be aware.
Factory reset after the above step.
Step 5:
Now comes the last part:
CSC Tweaks:
Download the 3 modified csc files from above link. Copy and replace them to path device/system/csc
Change the copied file permission to (rw-r-r).
To change the default device language and set the sms delivery option on by default, copy the Customer.xml file to your pc and edit it by using Notepad++.
Find the line as shown as in the picture below and modify as in it. Save it and replace it back to where it was from which will be device/system/csc and change its file permission again to rw-r-r.
Now turn off your device and boot into TWRP recovery. Perform a factory reset and reboot.
You will have latest apps with all the custom changes including your default language changed to English.
No need to install magisk manager apk as it is already there in the apps.zip folder.
Done!
Credit goes to all the rightful owners.
Special thanks to Mr. Buddha Tuladhar again for the phone.

Android 8.0 rom..and root/ twrp for scv33/sc-02h
Stock rom is in the link given
then flash
TWRP_3.1.1_hero2qltedcm.tar ( Wipe Data ->yes)
Boot to twrp and install:
1: no-verity-opt-encrypt-6.0.zip
2: Magisk-vXX.X.zip
Download link for all files
https://www.mediafire.com/folder/kn5cg1rolfjas/

Well done sir! thank you very much.
It would be wonderful if you can upload an odin flashable all in one file.
Appreciate your time and effort very much!

01. Flash 2017.03.07_SC02HOMU1BQC4 with Odin (upload by tienquynh93)
02. Flash 2017.04.07_1BQC4_Gobal_ManhIT.zip with Odin (upload & rebuild by ManhIT)
03. Flash 2017.03.17_TWRP_3.1.0 with Odin (AP) (Rebuild by ManhIT)
3.1 Reboot to TWRP Flash:
3.2 MaGisk to root (topjohnwu)
3.3 xPosed SDK 24 (Android 7.0) (rovo89)
This rom support multilanguage with defaulft vietnamese.
Lasest firmware: 2017.12.12_SC02HOMU1BQL3

Confused.
DariasLuc said:
01. Flash 2017.03.07_SC02HOMU1BQC4 with Odin (upload by tienquynh93)
02. Flash 2017.04.07_1BQC4_Gobal_ManhIT.zip with Odin (upload & rebuild by ManhIT)
03. Flash 2017.03.17_TWRP_3.1.0 with Odin (AP) (Rebuild by ManhIT)
3.1 Reboot to TWRP Flash:
3.2 MaGisk to root (topjohnwu)
3.3 xPosed SDK 24 (Android 7.0) (rovo89)
This rom support multilanguage with defaulft vietnamese.
Lasest firmware: 2017.12.12_SC02HOMU1BQL3
Click to expand...
Click to collapse
Is it necessary to flash 2017.03.07_SC02HOMU1BQC4 and 2017.04.07_1BQC4_Gobal_ManhIT.zip ? Or can i just simply flash the latest firmware 2017.12.12_SC02HOMU1BQL3 and root my phone?

Thank you, great job on compiling all this! It took quite a bit of study, but I understand now. Thanks again.

This root works.. but it kills NFC and Beam, Is that a known issue?
I tried this out about 15-20 different times this weekend. I was trying to get obtain root without losing NFC or Beam. (I need NFC on a daily basis).
Galaxy S7 Edge SC-02H (Docomo)
I have no problem installing TWRP. I can get root by either SuperSU or Magisk. Both kill NFC though.
I have tried so many different procedures.
1) Flash stock room (see below *) using Odin 3.12.3 and 3.12.5 (.5 works better)
As soon as installation was complete, I tested out NFC to make sure it works. It does. Then configured Developer options.
2) Then install TWRP (3.1.1 and 3.2.1) via Odin 3.12.5
3) Format then wiped (I also tried wipe without formatting)
4) Installed Magisk via TWRP. (I tried SuperSU as well)
5) Rebooted to system. I also tried Wiped cache, then reboot to system.
6) Once booted up, the first thing I did was check and see if NFC or Beem work. No.
Next I installed Magisk Manager app. I tried the one posted here. Also tried updating to the latest. And also tried installing the latest version of Magisk first.
I tested out root by using ES explorer and opening up the root directory. It worked.
I checked to see if NFC or Beam worked afterwards.. no.
7) Deleted bloatware. Followed this post's Step 5 exactly as is. Root stilled worked. NFC still didn't work.
So as much as I tried.. is it a known that NFC will not work if rooted?
* Firmwares tried:
SC02HOMU1BRG1
SC02HOMU1BRE1
SC02HOMU1BQL3
SC02HOMU1CRH5 (8.0)
SC02HOMU1BQC5 (Travis82's Nougat firmware)
SC02HOMU1BQC5 (the one posted on this thread)

Hi
audioqueso said:
This root works.. but it kills NFC and Beam, Is that a known issue?
I tried this out about 15-20 different times this weekend. I was trying to get obtain root without losing NFC or Beam. (I need NFC on a daily basis).
Galaxy S7 Edge SC-02H (Docomo)
I have no problem installing TWRP. I can get root by either SuperSU or Magisk. Both kill NFC though.
I have tried so many different procedures.
1) Flash stock room (see below *) using Odin 3.12.3 and 3.12.5 (.5 works better)
As soon as installation was complete, I tested out NFC to make sure it works. It does. Then configured Developer options.
2) Then install TWRP (3.1.1 and 3.2.1) via Odin 3.12.5
3) Format then wiped (I also tried wipe without formatting)
4) Installed Magisk via TWRP. (I tried SuperSU as well)
5) Rebooted to system. I also tried Wiped cache, then reboot to system.
6) Once booted up, the first thing I did was check and see if NFC or Beem work. No.
Next I installed Magisk Manager app. I tried the one posted here. Also tried updating to the latest. And also tried installing the latest version of Magisk first.
I tested out root by using ES explorer and opening up the root directory. It worked.
I checked to see if NFC or Beam worked afterwards.. no.
7) Deleted bloatware. Followed this post's Step 5 exactly as is. Root stilled worked. NFC still didn't work.
So as much as I tried.. is it a known that NFC will not work if rooted?
* Firmwares tried:
SC02HOMU1BRG1
SC02HOMU1BRE1
SC02HOMU1BQL3
SC02HOMU1CRH5 (8.0)
SC02HOMU1BQC5 (Travis82's Nougat firmware)
SC02HOMU1BQC5 (the one posted on this thread)
Click to expand...
Click to collapse
Hi, what Twrp Work in Android 8.0 you can Shared whith me?

3.1.1, 3.2.1 and 3.2.3
They all worked. I had originally started working with 3.1.1 and 3.2.1. However, I tried the latest 3.2.3 because I couldn't get NFC to work. I did it just to give it a try.
But all three versions that I listed had no problem installing.
Are you having trouble installing TWRP?

Yes, recovery is not remplace
Will you have a link and instructions for Android 8?

How to install TWRP on Galaxy S7 Edge (SC-02H)
TWRP Installation:
1) Download and installed Odin 3.12.5 (or the latest)
2) Turn off phone. Pressed and hold Volume Down+Home+Power at the same time to get to Download Mode. Once you see the Download Mode page, let go of the buttons. Press Volume Up to accept. (To cancel, press Volume Down )
3) Open Odin and click on AP. Load the TWRP file from your computer.
4) On the second tab of Odin, uncheck "Auto-reboot" (you need to have auto reboot disabled in order to successfully install TWRP). Press 'Start'.
5) Once the Odin status changes to a green "Pass", the installation is complete.
At this point, your phone will still be in Download Mode screen. For this step only, you will need to do two steps back to back. First, press and hold Vol.Down+Home+Power in order to get the phone out of the Download Mode screen.
As soon as the screen changes, press Volume UP+Home+Power.
You will see TWRP load.
That's it. You have successfully loaded TWRP.
From here on out, you will need to press Vol. Up+Home+Power in order to boot into TWRP. If you reflash your phone back to stock firmware using Odin, you will lose TWRP and will need to repeat these steps in order to install TWRP again.

audioqueso said:
TWRP Installation:
1) Download and installed Odin 3.12.5 (or the latest)
2) Turn off phone. Pressed and hold Volume Down+Home+Power at the same time to get to Download Mode. Once you see the Download Mode page, let go of the buttons. Press Volume Up to accept. (To cancel, press Volume Down )
3) Open Odin and click on AP. Load the TWRP file from your computer.
4) On the second tab of Odin, uncheck "Auto-reboot" (you need to have auto reboot disabled in order to successfully install TWRP). Press 'Start'.
5) Once the Odin status changes to a green "Pass", the installation is complete.
At this point, your phone will still be in Download Mode screen. For this step only, you will need to do two steps back to back. First, press and hold Vol.Down+Home+Power in order to get the phone out of the Download Mode screen.
As soon as the screen changes, press Volume UP+Home+Power.
You will see TWRP load.
That's it. You have successfully loaded TWRP.
From here on out, you will need to press Vol. Up+Home+Power in order to boot into TWRP. If you reflash your phone back to stock firmware using Odin, you will lose TWRP and will need to repeat these steps in order to install TWRP again.
Click to expand...
Click to collapse
Could you provide a link to the latest version of twrp?

Joslem said:
Could you provide a link to the latest version of twrp?
Click to expand...
Click to collapse
http://bfy.tw/KPwS

For Root SC02HOMU1CRH5
TWRP_3.1.1_hero2qltedcm.tar ( Wipe Data ->yes)
no-verity-opt-encrypt-6.0.zip
Magisk-vXX.X.zip
From: https://itok01.com/2018/09/23/root-sc-02h/

Global Rom for SCV33/SH-02H 8.0
https://drive.google.com/uc?id=1MiYK-VSYLRH_9T43sYbfgfvvKqqwRJjO&export=download
Go to Recovery and run "graphic test" > "Format Data" > ReBoot.
Install Magisk to root:
https://forum.xda-developers.com/showpost.php?p=77942910&postcount=14

DariasLuc said:
For Root SC02HOMU1CRH5
TWRP_3.1.1_hero2qltedcm.tar ( Wipe Data ->yes)
no-verity-opt-encrypt-6.0.zip
Magisk-vXX.X.zip
Click to expand...
Click to collapse
it works, thank you very much!!

S7 Edge Docomo sc-02h lost imei after factory reset
Sorry for being off topic, but please cam someone help me out in the regard that my S7 Edge Docomo sc-02h lost imei after just the factory reset. Any recommendation what i can do to get it back as my sim signals are now gone as well that means i cant make any calls or msg whatsoever.
Thanks in advance

usmann93 said:
Sorry for being off topic, but please cam someone help me out in the regard that my S7 Edge Docomo sc-02h lost imei after just the factory reset. Any recommendation what i can do to get it back as my sim signals are now gone as well that means i cant make any calls or msg whatsoever.
Thanks in advance
Click to expand...
Click to collapse
you just need working 3G sim card to fix your imei... after put 3g sim card to your phone and reboot imei will appear and you can use your normal sim again!

everyonesweird said:
This thread is for Japanese s7 edge scv33 that’s being booted up with SC-02H firmware after carrier unlocking.
I need help in order to compile all of these tweaks into an Odin flashable file so that users can simply flash it and make the changes.I would also like to add App-lock feature and international Samsung keyboard with secondary symbol in but can’t seem to make it work. So, if you are interested or have tried, please let me know.....
Click to expand...
Click to collapse
Very thank, im removed almost bloat of AU. But, what happen if i dont have CSC folder? and how to add Vietnamese laguage to SCV33 (AU) stock rom?

audioqueso said:
This root works.. but it kills NFC and Beam, Is that a known issue?
I tried this out about 15-20 different times this weekend. I was trying to get obtain root without losing NFC or Beam. (I need NFC on a daily basis).
Galaxy S7 Edge SC-02H (Docomo)
I have no problem installing TWRP. I can get root by either SuperSU or Magisk. Both kill NFC though.
I have tried so many different procedures.
1) Flash stock room (see below *) using Odin 3.12.3 and 3.12.5 (.5 works better)
As soon as installation was complete, I tested out NFC to make sure it works. It does. Then configured Developer options.
2) Then install TWRP (3.1.1 and 3.2.1) via Odin 3.12.5
3) Format then wiped (I also tried wipe without formatting)
4) Installed Magisk via TWRP. (I tried SuperSU as well)
5) Rebooted to system. I also tried Wiped cache, then reboot to system.
6) Once booted up, the first thing I did was check and see if NFC or Beem work. No.
Next I installed Magisk Manager app. I tried the one posted here. Also tried updating to the latest. And also tried installing the latest version of Magisk first.
I tested out root by using ES explorer and opening up the root directory. It worked.
I checked to see if NFC or Beam worked afterwards.. no.
7) Deleted bloatware. Followed this post's Step 5 exactly as is. Root stilled worked. NFC still didn't work.
So as much as I tried.. is it a known that NFC will not work if rooted?
* Firmwares tried:
SC02HOMU1BRG1
SC02HOMU1BRE1
SC02HOMU1BQL3
SC02HOMU1CRH5 (8.0)
SC02HOMU1BQC5 (Travis82's Nougat firmware)
SC02HOMU1BQC5 (the one posted on this thread)
Click to expand...
Click to collapse
I am also struggling about this. I think the problem only concerns TWRP or Root. However I think the problem is TWRP, because when I flash stock rom, nfc ok. Next, i flash TWRP (not root yet), nfc has been disabled now. So i think TWRP causes this problem. However, if i reflash stock recovery, everything remains unchanged, NFC is still turned off. so it is very contradictory.
Now I think of a test, after installing all (root), backing up all android. Then flash again with stock rom, check NFC. Finally, restore the backup. The goal is to completely remove the TWRP from the process but still root the device. I hope it will work. Will try if i have the time

Samsung Galaxy J8

Please can someone guide how to root Samsung Galaxy J8.
Sent from my SM-J810G using Tapatalk

I am trying to root my J810M but no sucess. CF autoroot not working to. It says passed but no root.... [emoji26]

J8 wifi/Bluetooth problem
I need some help .. i have the j810m. Everytime i comnect my bluetooth headset the wifi will still be connected but will not work once i disconnect the headset then it would work back as normal .. what to do i am getting really frustrated

Use firmware. Mobi
Backup your phone as you will lose everything
Enable Dev mode in settings
Enable oem unlock(enabling this will reset your phone but do not set up your phone in this reset stage)
Enable USB debugging
Go to firmware.mobi site and download your device's correct software's boot.img
Move that to your phone
Install magisk manager apk
Select patch img
Move the patched file to computer
Rename the file to boot.img and convert into a.tar format (use 7zip)
Flash using odin(phone must be in download mode)
Reboot your device and it will ask you to reset
Now reset and set up your phone as you would do to a new one
Download magisk manager again and this time click install and it will reboot
Check using root checker and volia
You are rooted :laugh:

sathvik989 said:
Backup your phone as you will lose everything
Enable Dev mode in settings
Enable oem unlock(enabling this will reset your phone but do not set up your phone in this reset stage)
Enable USB debugging
Go to firmware.mobi site and download your device's correct software's boot.img
Move that to your phone
Install magisk manager apk
Select patch img
Move the patched file to computer
Rename the file to boot.img and convert into a.tar format (use 7zip)
Flash using odin(phone must be in download mode)
Reboot your device and it will ask you to reset
Now reset and set up your phone as you would do to a new one
Download magisk manager again and this time click install and it will reboot
Check using root checker and volia
You are rooted :laugh:
Click to expand...
Click to collapse
Hi! I know that this thread is old. The instruction is working. But after successfully rooting the device. I cannot login to my samsung account and the pattern/pin/password for lockscreen is not validating the password I set. I'm on android pie.