Related
what are the benefits of doing super-CID (i.e. 11111111)
If i do superCID can I again restore to stock CID..
Please help
abhishek89 said:
what are the benefits of doing super-CID (i.e. 11111111)
If i do superCID can I again restore to stock CID..
Please help
Click to expand...
Click to collapse
Certain things, e.g. RUUs, need to have the correct Carrier ID on the phone in order to install via the bootloader or recovery using the PG58IMG.zip process. The Latest Firmware packs for example are grouped together into sets, this is to allow you to install them if you don't have SuperCID. If you have got SuperCID you can install any of them as all the CID checks pass.
Another reason to change the CID if to allow you to install a generic RUU instead of the one that came with the phone, this allows you to remove the bloatware. For example I'm on Vodafone and I installed the generic Euro RUU purely to get rig of the Vodafone crap that came pre-installed.
The process to change it back is identical to the way you write the SuperCID just using your original CID (mine for example is VODAP001). IIRC HTC__01 is the generic CID
gol_n_dal said:
Certain things, e.g. RUUs, need to have the correct Carrier ID on the phone in order to install via the bootloader or recovery using the PG58IMG.zip process. The Latest Firmware packs for example are grouped together into sets, this is to allow you to install them if you don't have SuperCID. If you have got SuperCID you can install any of them as all the CID checks pass.
Another reason to change the CID if to allow you to install a generic RUU instead of the one that came with the phone, this allows you to remove the bloatware. For example I'm on Vodafone and I installed the generic Euro RUU purely to get rig of the Vodafone crap that came pre-installed.
The process to change it back is identical to the way you write the SuperCID just using your original CID (mine for example is VODAP001). IIRC HTC__01 is the generic CID
Click to expand...
Click to collapse
So how do I install roms from different carriers
fatswaller4451 said:
So how do I install roms from different carriers
Click to expand...
Click to collapse
first you need to S-OFF then supercid
after that you can use any ruu.exe
Super Cid
rzr86 said:
first you need to S-OFF then supercid
after that you can use any ruu.exe
Click to expand...
Click to collapse
Hey thanks for your response
Ok so I have s-off and super Cid just a few more questions if u don't mind
1. can i install any ruu for any android phone or am I limited?
2. Will installing a ruu for another phone effect the way my current phone works
3. When installing a ruu.exe for another phone will I have to follow the same bootloader unlock method for that phone or my phone?
Sorry for the newbie questions but I have limited knowledge of super cid however I have been rooting for years now
I heard some bad things about super cid but have not had any issues thus far, the guide was very easy to follow and in fact just to make sure it was working I was able to ruu backwards
Thanks for your expertise you r awesome
fatswaller4451 said:
Hey thanks for your response
Ok so I have s-off and super Cid just a few more questions if u don't mind
1. can i install any ruu for any android phone or am I limited?
2. Will installing a ruu for another phone effect the way my current phone works
3. When installing a ruu.exe for another phone will I have to follow the same bootloader unlock method for that phone or my phone?
Sorry for the newbie questions but I have limited knowledge of super cid however I have been rooting for years now
I heard some bad things about super cid but have not had any issues thus far, the guide was very easy to follow and in fact just to make sure it was working I was able to ruu backwards
Thanks for your expertise you r awesome
Click to expand...
Click to collapse
1)with s-off and supercid you are not limited
2)it won't affect anything at all
But probably you will have some official updates from the specific carrier(if you have)
3)I think it depends from the carrier of the Ruu you have chosen
But actually there is no need to unlock the bootloader because you are on s-off
Edit:in second and third question what do you mean by another phone?
I assume you mean another carrier
If yes then yes
If you mean another device(for example Samsung)then absolutely no
Of course you can use any ruu but only from sensation's devices
Sent from my HTC Sensation using xda premium
super cid
rzr86 said:
1)with s-off and supercid you are not limited
2)it won't affect anything at all
But probably you will have some official updates from the specific carrier(if you have)
3)I think it depends from the carrier of the Ruu you have chosen
But actually there is no need to unlock the bootloader because you are on s-off
Edit:in second and third question what do you mean by another phone?
I assume you mean another carrier
If yes then yes
If you mean another device(for example Samsung)then absolutely no
Of course you can use any ruu but only from sensation's devices
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
So I have verified that I have super cid on my evo 4g lte by ruuing backward, however when I try flashing an htc one ruu i get an error message that its the wrong file, so i tried flashing an original evo 4g ruu and still get the same message
I am still s-off
relocked bootloader
super cid
hboot 2.0.9
latest firmware
am i missing something?
Thanks
fatswaller4451 said:
So I have verified that I have super cid on my evo 4g lte by ruuing backward, however when I try flashing an htc one ruu i get an error message that its the wrong file, so i tried flashing an original evo 4g ruu and still get the same message
I am still s-off
relocked bootloader
super cid
hboot 2.0.9
latest firmware
am i missing something?
Thanks
Click to expand...
Click to collapse
wait man man
for which device are we talking about?
not for sensation?
EVO 4g lte
Sent from my EVO using xda app-developers app
fatswaller4451 said:
EVO 4g lte
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
no maaaaannnnn
don't use any ruu for sensation to evo 4g
go to the evo 4g's thread and see there for ruu.exe files
this forum is only for sensation/xe/4g
i thought you were talking about sensation devices
Ok thanks for the info but I was talking about super cid and installing roms from different carrier's
Sent from my EVO using xda app-developers app
---------- Post added at 12:14 PM ---------- Previous post was at 12:06 PM ----------
I was following a previous thread
Sent from my EVO using xda app-developers app
to reduce the confusion
NO- you cant/shouldn't flash another model phone's RUU on another
there is a high chance of bricking the device if you do that
Does SuperCID also network unlocks the phone?
There is a lot of confusion on the internet about SuperCID. I have HTC One S which is locked to T-Mobile and I want to get it network unlocked. the "strings -n 8 /dev/block/mmcblk0p6" method did not show unlock_code for my phone (though it has worked for some other people). While googling I found that doing SuperCID by changing mmcblk0p4 can also network unlock the phone. Please let me know if you have some idea. Thanks.
gol_n_dal said:
Certain things, e.g. RUUs, need to have the correct Carrier ID on the phone in order to install via the bootloader or recovery using the PG58IMG.zip process. The Latest Firmware packs for example are grouped together into sets, this is to allow you to install them if you don't have SuperCID. If you have got SuperCID you can install any of them as all the CID checks pass.
Another reason to change the CID if to allow you to install a generic RUU instead of the one that came with the phone, this allows you to remove the bloatware. For example I'm on Vodafone and I installed the generic Euro RUU purely to get rig of the Vodafone crap that came pre-installed.
The process to change it back is identical to the way you write the SuperCID just using your original CID (mine for example is VODAP001). IIRC HTC__01 is the generic CID
Click to expand...
Click to collapse
Hi guys!
I hope it's not a problem I opened a new thread but I haven't really found a fully answered topic to my question. (I might be blind, anyway...)
So I own a Vodafone UK Branded HTC Sensation. I am thinking to root the device. I do not want to use any custom rom, I'm happy with the official one (at the moment...) and I would only like to have "ROOT Access". So, am I right that I do not need to "S-OFF"?
In this case as I understand:
1.) I have to unlock bootloader (HTCdev)
2.) Follow this guide: http://forum.xda-developers.com/showthread.php?t=1632553 to root the device
Is that right?
After the root had been done, will I be able to remove all the applications, boot image... pre-installed by Vodafone? (Kind of "de-brand" the device) Or will I be able to install a "EU RUU" or only the "Vodafone RUU". I'm really sorry if I'm totally wrong but I have been reading the threads for couple of weeks now and I already got absolutely confused... I appreciate any help, explanation. Thank you very much in advance!
matekaneve said:
Hi guys!
I hope it's not a problem I opened a new thread but I haven't really found a fully answered topic to my question. (I might be blind, anyway...)
So I own a Vodafone UK Branded HTC Sensation. I am thinking to root the device. I do not want to use any custom rom, I'm happy with the official one (at the moment...) and I would only like to have "ROOT Access". So, am I right that I do not need to "S-OFF"?
In this case as I understand:
1.) I have to unlock bootloader (HTCdev)
2.) Follow this guide: http://forum.xda-developers.com/showthread.php?t=1632553 to root the device
Is that right?
After the root had been done, will I be able to remove all the applications, boot image... pre-installed by Vodafone? (Kind of "de-brand" the device) Or will I be able to install a "EU RUU" or only the "Vodafone RUU". I'm really sorry if I'm totally wrong but I have been reading the threads for couple of weeks now and I already got absolutely confused... I appreciate any help, explanation. Thank you very much in advance!
Click to expand...
Click to collapse
Hi,
From having a quick look at the guide in the link you don't even need to unlock the bootloader via HTCdev. Just follow the guide. I personally unlocked my bootloader and S-off'd via revolutionary.io who did a great job of beating HTCdev to the punch within months of the sensation coming out.
Here's a "Super noob guide to unlocking bootloader and s-off" which may ease your confusion. Although for the HTC Rezound , the concept for all HTC Bootloaders is the same, Just don't follow that guide verbatim otherwise bad things may happen. :laugh:
You should be able to de-bloat ( probably the search term you want to use ) your rom after root. There's also a guide for carrier unlocking knocking around somewhere which I also did, Unlocking it from 3UK grips
Good Luck
You could have probably asked your questions in the guide thread but meh, no one died and I don't think anyone's losing sleep over this post at least you've spent some time trying to figure it out on your own before calling for help
trevd said:
Hi,
From having a quick look at the guide in the link you don't even need to unlock the bootloader via HTCdev. Just follow the guide. I personally unlocked my bootloader and S-off'd via revolutionary.io who did a great job of beating HTCdev to the punch within months of the sensation coming out.
Here's a "Super noob guide to unlocking bootloader and s-off" which may ease your confusion. Although for the HTC Rezound , the concept for all HTC Bootloaders is the same, Just don't follow that guide verbatim otherwise bad things may happen. :laugh:
You should be able to de-bloat ( probably the search term you want to use ) your rom after root. There's also a guide for carrier unlocking knocking around somewhere which I also did, Unlocking it from 3UK grips
Good Luck
You could have probably asked your questions in the guide thread but meh, no one died and I don't think anyone's losing sleep over this post at least you've spent some time trying to figure it out on your own before calling for help
Click to expand...
Click to collapse
Thank you very much for your reply! My Hboot version is 1.27. As far as I know I am unable to use the "revolutionary" method to S-OFF and unlock the bootloader. Anyway I will go for the htcdev one once I'm back from work! Thank you for your help again!
matekaneve said:
Thank you very much for your reply! My Hboot version is 1.27. As far as I know I am unable to use the "revolutionary" method to S-OFF and unlock the bootloader. Anyway I will go for the htcdev one once I'm back from work! Thank you for your help again!
Click to expand...
Click to collapse
Hi,
Please check my signature (☺ A great starting point for all new Sensation owners ☺) for a good list of guides to s-off.
I would suggest ganesh or kgs methods.
You will also need to install a custom recovery.
Check out joaquinf's guide to installing 4EXT.
malybru said:
Hi,
Please check my signature (☺ A great starting point for all new Sensation owners ☺) for a good list of guides to s-off.
I would suggest ganesh or kgs methods.
You will also need to install a custom recovery.
Check out joaquinf's guide to installing 4EXT.
Click to expand...
Click to collapse
Just an update! I managed to root my device! Now I'm a happy chappy! :victory: Thank you guys for all the help and guides! I used this guide: http://forum.xda-developers.com/showthread.php?t=1497404
I have root access, unlocked bootloader and 4ext installed. :good: I might try S-OFF another time...
Thank you again!
Hello everyone.
I am new to this part of the forum for i just received a somewhat non working AT&T HTC ONE XL from a friend.
I presume he did not read much into his issue at the time and messed up this phone one way or the other.
Basically the phone works, just not as a phone.
So i will take my time to explain the whole situation with as much detail as possible.
I am personally familiar with rooting, setting up recovery and installing custom roms on android phones (just not on this model yet).
The phone details in its current state are:
- android version 4.0.4
- htc sense version 4.0
- software number cleanrom 4.5 beta2
- htc extension version htcextension_403_1_ga_20
- kernel 3.0.8-01564-gdc95f45
- baseband 0.16.32.09.01_3_10.79.32.08L
As soon as i received the phone, i contacted at&t to ask for an unlocking code, they gladly oblige.
I insert the new SIM card (non AT&T) and the phone asks me to insert the code. After correctly inserting it, the phone accepts the code and proceeds to reboot. After the reboot i get the phone locked screen again and asks me for the code one more time.
At this point i start searching online for the official firmware from htc for this specific model and find the 4.2.2 version and proceed to install it according to their requirements and steps (in manual mode from a desktop pc since the rom installed doesn't have the update feature).
The process gets locked at a point and cannot proceed further.
Phone boots normally again and i decide to do a factory reset. This i when i notice a teamwin custom recovery was installed which is what is blocking the official rom installation.
So at this point i am open for ideas.
I'm positive the issue is not very hard to solve but i also know that i am missing the original recovery. I can only guess no official updates were installed so the phone was running the original 4.0.4 version.
Meanwhile i will be scouting this forum on how this phone exactly works for i understood that there were two forms of recoveries for it (one full and one partial).
I still don't know the recovery version, if it's good, how to access it (different combinations of volume and power pressing didn't work for me).
Finally your opinion on how to make the phone unlocking code work, as in would i need to go back to official, or would a custom different rom work as a solution.
Wish you guys a good day and awaiting your feedback.
Cheers.
Need more info. Boot into bootloader by holding down both the volume down rocker and the power button. After the power button is held for a few seconds, you should see the capacitive buttons flash a few times, and the phone will reboot. Let go of the power button, but DO NOT let go of the volume down rocker until the while hboot screen comes up. When you see the hboot screen, tell us what it says.
In particular, we need to know if it says s-off or s-on, if it says CID 11111111, and hboot version. Also, if it says LOCKED, UNLOCKED, or RELOCKED.
Official RUU will not run if the bootloader is UNLOCKED (needs to be RELOCKED or LOCKED). But be aware, if the phone is superCID and s-on, running a Jellybean RUU or OTA will brick the phone. Which is one of the reasons we need the bootloader info.
RUU does not need to have stock recovery to run, only OTA does. My guess is your bootloader is unlocked, or its the wrong RUU. Any error message when the RUU fails (if so, what does it say)?
Hi, thank you for your quick reply.
I'm going to write down all that is written in the recovery for i still don't understand what locked or unlocked means, s-on or s-off.
anyway, here goes:
tampered
unlocked
evita pvt ship s-on rl
hboot-1.09.0000
radio-0.16.32.09.01_3
opendsp-v25.1.0.32.0405
emmc-boot
i can't find anything related to cid and i'm still not used to this recovery just yet. wouldn't want to press anything just yet.
i hope i gave enough info and i guess it doesn't look too good just yet.
thank you again for your help.
you should remind me to reduce the use of "just yet".
i'm doing some more reading about superCID and S-on or S-off.
I understand there's a utility from this thread that could determine the supercid status.
http://forum.xda-developers.com/showthread.php?t=1672284
again i'd like to point out i have no clue what has been done to this phone so i am trying to handle it with as much care as possible in order not to brick it.
in case superCID is 1111111 and naturally i don't have the original CID, where would that leave me?
As i am understanding slowly how this phone works, if the previous user managed to install a custom rom and a custom recovery on it, would only make sense to assume the superCID has been modified? (i'll be running the tool shortly unless someone jumps and says NOOOOOOOOO don't do it!!!)
I also noticed the teamwin recovery installed is 2.1.8.1
next is understanding what s-on and s-off are all about.
i have a feeling my chances of reverting to stock firmware are slimming. this is quite a complicated phone, nice challenge.
i'm going to point out again what my main problem is: i can't unlock the sim using the code provided by at&t since as soon as the phone reboots it asks me again. so i don't mind whichever route to take, whether custom or stock, as long as i can unlock the sim the simple way.
cheers.
srasiroslayer said:
At this point i start searching online for the official firmware from htc for this specific model and find the 4.2.2 version and proceed to install it according to their requirements and steps (in manual mode from a desktop pc since the rom installed doesn't have the update feature).
The process gets locked at a point and cannot proceed further.
Phone boots normally again and i decide to do a factory reset. This i when i notice a teamwin custom recovery was installed which is what is blocking the official rom installation.
Click to expand...
Click to collapse
This is not correct (the text I've bold faced above). OTA requires stock recovery, but RUU does not.
What stopped the RUU from working, is that you bootloader is unlocked (as indicated by the "unlocked" text in hboot). But in your case, you are lucky, since if you were trying to run the 3.18 Jellybean RUU, if it had gotten past the bootloader lock check, it would have bricked the phone (known bug) if you have SuperCID (which is pretty likely).
To reiterate: DO NOT try to relock the bootloader and run the 3.18 RUU, as with S-on and SuperCID, this will brick your phone.
If you have a working adb/fastboot environment, you can easily check CID with the command: fastboot getvar all
---------- Post added at 10:26 AM ---------- Previous post was at 10:23 AM ----------
srasiroslayer said:
i have a feeling my chances of reverting to stock firmware are slimming.
Click to expand...
Click to collapse
That is far form the truth. Getting back to stock is not that hard.
But if you only want to SIM unlock, I'm not sure that going stock will necessarily help you. You are on CleanROM now, which is pretty close to stock, and I don't think there have been many issues getting SIM unlock on CleanROM.
redpoint73 said:
This is not correct (the text I've bold faced above). OTA requires stock recovery, but RUU does not.
What stopped the RUU from working, is that you bootloader is unlocked (as indicated by the "unlocked" text in hboot). But in your case, you are lucky, since if you were trying to run the 3.18 Jellybean RUU, if it had gotten past the bootloader lock check, it would have bricked the phone (known bug) if you have SuperCID (which is pretty likely).
To reiterate: DO NOT try to relock the bootloader and run the 3.18 RUU, as with S-on and SuperCID, this will brick your phone.
If you have a working adb/fastboot environment, you can easily check CID with the command: fastboot getvar all
---------- Post added at 10:26 AM ---------- Previous post was at 10:23 AM ----------
That is far form the truth. Getting back to stock is not that hard.
But if you only want to SIM unlock, I'm not sure that going stock will necessarily help you. You are on CleanROM now, which is pretty close to stock, and I don't think there have been many issues getting SIM unlock on CleanROM.
Click to expand...
Click to collapse
Wunderbar,
Thank you again for clarifying things up.
I've been taking this time to read more about this phone on this thread:
- http://forum.xda-developers.com/showthread.php?t=1671237
So i am starting to understand how it works.
i have to admit that i should consider myself lucky for if the phone had a locked bootloader, it would've been bricked.
i've been reading a bit about superCID and i don't have a working linux environment (other than virutal) running right now.
but i'll figure out how to check if it's superCID or not (more likely yes).
now that i've figured out one way or the other that the simlock has nothing to do with the firmwares or recovery........... what could cause it?
again i just want it to work and then i'll take the time to play with the custom roms.
I have the correct unlocking code from AT&T since it wouldn't have accepted it to reboot the phone if it was wrong.
so what could be messing it up?
Cheers
srasiroslayer said:
Wunderbar,
i've been reading a bit about superCID and i don't have a working linux environment (other than virutal) running right now.
but i'll figure out how to check if it's superCID or not (more likely yes).
Click to expand...
Click to collapse
You don't need a Linux environment to get fastboot/adb working. And you will need them if you want to get s-off or change the CID (which would be the solutions to your problem of running the RUU).
To get fastboot/adb going, I'd suggest you start here: http://forum.xda-developers.com/showthread.php?t=1754018
There are some apps what will read the phone's state including CID. Others here have mentioned the name of one (or more) such app, but I can't recall, and I don't use it. I'm used to using fastboot.
srasiroslayer said:
now that i've figured out one way or the other that the simlock has nothing to do with the firmwares or recovery........... what could cause it?
again i just want it to work and then i'll take the time to play with the custom roms.
I have the correct unlocking code from AT&T since it wouldn't have accepted it to reboot the phone if it was wrong.
so what could be messing it up?
Click to expand...
Click to collapse
Not sure. Going back to stock might help. Its all I can think of. But don't be disappointed if it still doesn't work.
Alright,
So i figured out my CIDnum is 1111111111 using fastboot.
I understand there's a tool that can revert that.
I should also switch to s-off next.
Then at the end lock the bootloader using the adb commands.
Am i on the right track?
At this point i'll try running the RUU and cross my fingers.
My question is, shouldn't i have the original CID number?
and another off topic point, i have no clue what s-on or s-off are.
i'll get into that reading mode again in a bit.
Thank you again, i feel i'm on the right track now and confident.
Cheers
P.S.: do you need me to post the "fastboot getvar all" results? or only thing missing to be sure of was the CID?
Hang on, you're s-on and SuperCID, don't run the RUU or you'll brick your phone. You need to do some reading and research all this before you try these things.
Sent from my Evita
Guys I am Vivek Rajput, from India. I have AT&T HTC oneX. Anything related to internet is not working except whatsapp. Every app is showing network error msg. Showing some data here which i got after reading here. Assume me complete novice about software/cellphones.
***LOCKED***
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19as.320911_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012,14:36:28
Click to expand...
Click to collapse
Have you checked your APNs?
Sent from my Evita
srasiroslayer said:
Alright,
So i figured out my CIDnum is 1111111111 using fastboot.
I understand there's a tool that can revert that.
I should also switch to s-off next.
Then at the end lock the bootloader using the adb commands.
Am i on the right track?
At this point i'll try running the RUU and cross my fingers.
Click to expand...
Click to collapse
If you are going to s-off, you DO NOT want to change the CID. SuperCID (11111111) is needed to s-off.
As mentioned, make sure you s-off before RUU, or you will brick.
Once you are s-off, it shouldn't matter whether you lock the bootloader or not. S-off means all security checks are bypassed, including the check for bootloader lock.
srasiroslayer said:
and another off topic point, i have no clue what s-on or s-off are.
Click to expand...
Click to collapse
s-off, as mentioned above means all security checks are off. There are good and bad points to this.
The good, is that you will be safe of the SuperCID + RUU brick condition. Custom ROMs will also be easier to flash, if you are interested in doing that (do not need to flash boot.img separately).
The bad of s-off, is that because all security checks are off, there are no safety checks to prevent you from flashing the wrong things. You have to be very careful you don't flash something that is not intended for the device, as it may brick the phone.
Are you are okay with that, then proceed with s-off. If not, the alternate solution is to change the CID back to the proper AT&T CID (cws__001). This will also prevent the SuperCID + RUU brick condition. But may make the phone harder to s-off in the future, if you later choose that route.
It looks like then that the s-off route is the one to take, since i will definitely in the future be interested in flashing custom roms.
And it looks relatively easy as per:
http://forum.xda-developers.com/showthread.php?t=2155071
After doing some reading, it also looks safe to achieve s-off on custom roms such as my case.
I'm still reading if s-off will work on my bootloader version or if there are any specific versions to run it at. (so far no mention so good)
I'm guessing i will run s-off today and if everything works out as it should will post my results here.
Only then will i proceed to run the RUU which i downloaded from htc for the at&t model specifically (no chance i could go wrong with that).
Thank you for all the help, i honestly don't think i would've found my way around easily without guidance.
Cheers
Yes, the s-off method is easy, and it should work on any hboot version.
Good luck.
Could just having S-off fix my sim locked issue?
In any case new questions arise in my head such as since my model number is PJ8310000 and that with s-off i will be installing PJ8312000-OneX.zip, will that affect running the RUU later on?
srasiroslayer said:
Could just having S-off fix my sim locked issue?
Click to expand...
Click to collapse
I doubt it. SIM lock and s-off are not related, to my knowledge.
srasiroslayer said:
In any case new questions arise in my head such as since my model number is PJ8310000 and that with s-off i will be installing PJ8312000-OneX.zip, will that affect running the RUU later on?
Click to expand...
Click to collapse
Once you are s-off, all security and safety checks are off by definition. As long as you are running an RUU meant for EVITA, you will be safe, and it should run properly.
Looks like i got the 99 error thing.
at first i had the error 92 and all was working good but after the final reboot didn't get s-off
the second try i'm getting error 99.
I'm going to read more into it.
I'm still s-on so.......
So here are the current updates.
As i mentioned in the previous post, running it the first time resulted in error 92 which is normal, followed instructions and didn't get s-off.
second time i had error 99. still no s-off.
I turn off the device and power it back on, run the script all over again with a real good attention and precision (i usually don't f*ck things up).
This time i get the error 92 again and still no success at the end. (did this over 4 times now and no s-off).
would i be logical for me to assume that once the rom is booted it's messed up somewhere? hence the last part of the script not working and also hence sim unlock not working?
what's a good custom rom that would i could install using recovery and not brick my phone?
maybe just installing one would solve all my issues.
Cheers
What ROM are you attempting s-off on?
PS. Asking for a suggested/best/favourite ROM isn't allowed here.
Sent from my Evita
timmaaa said:
What ROM are you attempting s-off on?
PS. Asking for a suggested/best/favourite ROM isn't allowed here.
Sent from my Evita
Click to expand...
Click to collapse
Hi,
I'm trying it on CleanROM 4.5 beta2.
And by best rom in my case was asking one that would be compatible with my situation, as in hboot 1.0.9, teamwin 2.1.8.1 recovery, supercid, unlocked, s-on.
Cheers.
Hi everybody first of all excelent website...
I never had problems but when happens I look all over ethe Google or sea developers but this time I realy can't seem to get it done.
Moving from Samsung galaxy to HTC one x I can't unlock bootloader in order to flash a recovery and a Rom
I have try several tut but nnothing dosent change CID to unlock trought htcdev or the one click method or all one kit
And yes I search in all xda I like I say I don't get it right
Can someone help me, my info is:
Hboot 2.14
Android 4.1.1
Firmware version 3.18
At&t HTC one x
Thanks to everybody
Darkpikasso said:
Hi everybody first of all excelent website...
I never had problems but when happens I look all over ethe Google or sea developers but this time I realy can't seem to get it done.
Moving from Samsung galaxy to HTC one x I can't unlock bootloader in order to flash a recovery and a Rom
I have try several tut but nnothing dosent change CID to unlock trought htcdev or the one click method or all one kit
And yes I search in all xda I like I say I don't get it right
Can someone help me, my info is:
Hboot 2.14
Android 4.1.1
Firmware version 3.18
At&t HTC one x
Thanks to everybody
Click to expand...
Click to collapse
There is a thread HTC one x noobs u check that I hvnt searched enough unlocking is a simple process and it's all over the xda
Here is the url
http://forum.xda-developers.com/showthread.php?t=2567916
Or just search root method for 3.18 HTC one x
Sent from my HTC One X using XDA Premium 4 mobile app
It's an at&t phone, the at&t CID is blocked by htcdev so you need to get SuperCID before being able to unlock the bootloader. Click the Everything Evita link in my signature and bookmark that thread, it's a resource thread that contains everything you'll ever need. Once you're in that thread navigate to the root section and find the 3.18 root method, this is the only method that'll work with your current firmware. Follow the instructions in that thread and then you can unlock your bootloader.
Once you have an unlocked bootloader you can install TWRP recovery which will allow you to root your stock ROM or install custom ROMs. If you need instructions on this click the How-To Guide For Beginners link in my signature, it's a thread I put together detailing some basic operations. If you have any questions feel free to ask in my Noob Friendly Q&A + General Help thread.
Sent from my One X using Tapatalk
You need to use the correct root method that corresponds to your firmware version in order to change your CID. Trying other methods you randomly Google around for is not going to work.
Use my Index thread, look under "ROOT" and find the method that matches your firmware number (3.18).
http://forum.xda-developers.com/showthread.php?t=1671237
There is not one-click method that works for firmware 3.18. Trying methods that don't match your firmware number is a waste of time.
Also, when asking for help, you need to be absolutely specific as to what you have tried, and what you haven't (including the result such as error messages, etc). If you don't give us specifics, it makes it even harder for us to help you.
Hasoon2000's all-in-one toolkit should work on 3.18. But if this is the one you tried, you haven't told us what happens when you try to use it.
To make it easier, here's the link to the 3.18 root method:
http://forum.xda-developers.com/showthread.php?t=2285086
You'll still want to bookmark the Everything Evita thread linked in my signature.
Sent from my One X using Tapatalk
Thank you everybody
When I try the all in one kit gave the error of waiting for the device, updated the adv drivers and still dosent show the CID change
In htcdev give me the MID not allowed error
In most cases, all in one method, Jose method, motoXchopper method dosent seems to work what I'm going to try is to uninstall all the drivers for HTC one x and install again
Darkpikasso said:
In most cases, all in one method, Jose method, motoXchopper method dosent seems to work what I'm going to try is to uninstall all the drivers for HTC one x and install again
Click to expand...
Click to collapse
What the heck is "Jose method"? Again, I think your are fumbling around with methods that aren't even intended for your device or firmware version.
Do you have a working adb environment? What is the response if you use the command:
adb devices
ruffain said:
There is a thread HTC one x noobs u check that I hvnt searched enough unlocking is a simple process and it's all over the xda
Here is the url
http://forum.xda-developers.com/showthread.php?t=2567916
Or just search root method for 3.18 HTC one x
Sent from my HTC One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Come on, you of all people shouldn't be giving attitude to this guy telling him he hasn't searched enough. You've asked me multiple questions that could have been answered if you had searched for the answer, including how to unlock your bootloader, that's kinda like the pot calling the kettle black.
It's easy for you to say unlocking the bootloader is an easy process once you've done it. The fact is that it isn't that simple for someone who is unaware that there are different methods for different firmware versions.
Sent from my One X using Tapatalk
redpoint73 said:
What the heck is "Jose method"? Again, I think your are fumbling around with methods that aren't even intended for your device or firmware version.
Do you have a working adb environment? What is the response if you use the command:
adb devices
Click to expand...
Click to collapse
Thank you for all the responses
The error that gives me still is the same mid not allowed
Still having problems, but someone told me that it is first to root and then change the CID to superCID 1111111 and then run a all in one program to unlock
Is it thruth?
You've been told quite a few times now that you can't unlock your bootloader until you have SuperCID. You need to use the 3.18 root method that I linked you to a few posts ago. Forget about the toolkits, just go to that thread and follow the instructions.
Sent from my Evita
Darkpikasso said:
Thank you for all the responses
The error that gives me still is the same mid not allowed
Still having problems, but someone told me that it is first to root and then change the CID to superCID 1111111 and then run a all in one program to unlock
Is it thruth?
Click to expand...
Click to collapse
Ok I had the same issue several months ago. I have AT&t One x as well. I noticed I could unlock the bootloader and S-OFF when my phone was carrier unlocked. I used the roadrunner method I believe (it's been awhile). I am certain Timaaaa knows what he is saying, but if you can't find a solution, that may be your other answer as well. Worked for me.
Roadrunner? I don't think such a method exists for this device. You can't get s-off without root, you can't get root without an unlocked bootloader, you can get an unlocked bootloader without SuperCID, the only way to get SuperCID on his firmware is to use the 3.18 root method. Hence the reason that's been stated over and over again in this thread. It's the only solution. Carrier unlocking has absolutely nothing to do with the bootloader unlock / root process.
Sent from my Evita
timmaaa said:
You've been told quite a few times now that you can't unlock your bootloader until you have SuperCID. You need to use the 3.18 root method that I linked you to a few posts ago. Forget about the toolkits, just go to that thread and follow the instructions.
Sent from my Evita
Click to expand...
Click to collapse
Got it, first root and then unlock
Keep you update and thanks a lot for the help
No, SuperCID, unlock, custom recovery, root.
Sent from my Evita
timmaaa said:
No, SuperCID, unlock, custom recovery, root.
Sent from my Evita
Click to expand...
Click to collapse
Thanks everybody for the help but I can't get superCID
The htc dosent let him write and all the exploits to change it ether dosent find the device or dosent allow to write the commands
I really don't know what is the problem
I already install new drivers uninstall the ones from Samsung that I had and nothing
Not even my phone has the option to put it in charge only it has various opcitions but none of them are charge only
What do you mean by "all the exploits"? Which exploits have you tried? Did you try the 3.18 root method I gave you the link to?
Sent from my Evita
lemonfugu said:
Ok I had the same issue several months ago. I have AT&t One x as well. I noticed I could unlock the bootloader and S-OFF when my phone was carrier unlocked. I used the roadrunner method I believe (it's been awhile). I am certain Timaaaa knows what he is saying, but if you can't find a solution, that may be your other answer as well. Worked for me.
Click to expand...
Click to collapse
I got it....
I uninstall the drivers and install again there's were got the connection and unlocked but it says TEMPERED
Is that ok? Later in the afternoon I'm going to install custom recovery s-off and root
Yeah that's totally normal. I'd suggest you have a look at my How-To Guide For Beginners thread (link in my signature), it has some good instructions on your next steps.
Sent from my Evita
timmaaa said:
Roadrunner? I don't think such a method exists for this device.
Click to expand...
Click to collapse
Probably is referring to the Rumrunner s-off method. And yes, carrier (SIM) unlock has nothing to do with bootloader unlock and/or s-off. Probably just a coincidence that that person was able to bootloader unlock after doing SIM unlock.
Thank you very much for the help now I have it everydone unlock, custom recovery, root and s-off.
I was having problems with faceoff to s-off but nothing big
I already have install viperxl with beastmode kernel
Sent from my HTC One X using xda app-developers app
Is there any twrp recovery for this phone yet? Or how do I root it
I am also interested in this. Please can someone point me in the right direction? Maybe device is too new right now? Not sure, thanks
jaypeg123 said:
Is there any twrp recovery for this phone yet? Or how do I root it
Click to expand...
Click to collapse
Aloha Jay,
I'm also looking daily for TWRP recovery for the A9. I did stumble across this link for rooting, but haven't tried it yet. (http://orlandopython.com/how-to-root-htc-one-a9-guide/). I don't know how reliable this is, maybe someone can chime in if they used it for other devices. I have not gotten my unlocked device from HTC yet, anyways I'm a Verizon subscriber and have to wait for the software availability. I did check the hidden website and the boot loader unlock is there. I have a reliable person waiting for me the ship my device to him for S-off. I'm trying to get everything lined up before the release.
Hope this helps.
Mahalo
Ok interesting but... The bootloader can be unlocked from htc dev site, and when that is done you probably can install supersu from the pc. But I want the twrp and control it better. And s-off to.
Probably won't be long for TWRP, but few people even have the phone at this point
I'm s-off on my unit
Sent from my unknown using Tapatalk
Cj719 said:
I'm s-off on my unit
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
How did you do that?
twrp
Cj719 said:
I'm s-off on my unit
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
Can you please share how you have done this? I've been searching everywhere and can't seem to find a custom recovery let alone s-off the device, lol
That's how my unit shipped
Sent from my unknown using Tapatalk
Cj719 said:
That's how my unit shipped
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
Is it shipped s-off, unlocked bootloader and unlocked carrier? I thought it was just the Sim that was unlocked
I have a carrier unit I don't believe they ship that way only the unlocked version
Sent from my unknown using Tapatalk
1) TWRP - current issue building twrp is no kernel source is available at this time, so touch functions dont work. If no one else posts a recovery soon, I will.
2) Root - At this time, the only actual way to root the device is the guide i just posted http://forum.xda-developers.com/one-a9/development/root-htc-a9-t3244141
twrp
Hi jcase
Thank you for the heads up on rooting the a9. I have a unlocked gsm version of the phone purchased in Europe. Please can you send me the boot image I need in order to root the device. I'll leave all the details below, and please please can you also send me or post a custom recovery as I believe I will need that as per your instructions in order to get this done. Many thanks in advance for your time and input.
htc_hiaeuhl pvt s-on
LK-1.0.0.0000
[email protected]_29.05_F
OpenDSP-5.8.4.00190-8952_0922
OS-1.10.401.7 CL635503 release-keys
Oct 13 2015,23:56:17(635503)
Hope this is everything you need. Await for your reponse. Thank you
Added directions for requesting model/carrier/firmware variants added to my op, get the fingerprint and boot.img per my directions, and I will do it when time allwos
madzee said:
Hi jcase
Thank you for the heads up on rooting the a9. I have a unlocked gsm version of the phone purchased in Europe. Please can you send me the boot image I need in order to root the device. I'll leave all the details below, and please please can you also send me or post a custom recovery as I believe I will need that as per your instructions in order to get this done. Many thanks in advance for your time and input.
htc_hiaeuhl pvt s-on
LK-1.0.0.0000
[email protected]_29.05_F
OpenDSP-5.8.4.00190-8952_0922
OS-1.10.401.7 CL635503 release-keys
Oct 13 2015,23:56:17(635503)
Hope this is everything you need. Await for your reponse. Thank you
Click to expand...
Click to collapse
twrp
Hi jcase
adb shell
cd /dev/block/platform/{something here, depends on your device}/by-name
dd if=boot of=/tmp/boot.img
exit
adb pull boot.img
Little confused here as you have said "something here, depends on your device by-name". In my case being the A9, do I type a9, htc a9 etc after the command? And "dd if=boot of=/tmp/boot.img" do I write that straight after the "device name" or is it one or the other?
Sorry if this is a noob question but never rooted like this before hence the question. Thanks