Install instruction:
Frist uninstall other audio mod
Open magisk
Go to module
Add module jdsp(link in this tread, add www to download file )
install
Reboot
Enjoy))
Tested on huawei p20 pro clt-09
Download:
.dropbox.com/s/kiyy6iax9nckg0k/jdsp_v1.7.4.zip?dl=0
Nice, I'd tried 1.7.2 but it would FC whenever I tried to open it, 1.7.4 is now opening. I've not had time to test it out though.
Does it work on a ctl-l29 too?
Gesendet von meinem CLT-L29 mit Tapatalk
Hansl1 said:
Does it work on a ctl-l29 too?
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
Yes it works
Works on L09 like a charm, thanks!
P0sixSplo1t_2 said:
Install instruction:
Frist uninstall other audio mod
Open magisk
Go to module
Add module jdsp(link in this tread, add www to download file )
install
Reboot
Enjoy))
Tested on huawei p20 pro clt-09
Download:
.dropbox.com/s/kiyy6iax9nckg0k/jdsp_v1.7.4.zip?dl=0
Click to expand...
Click to collapse
I tried on 9.0, is not workin. Stuck at HUAWEI logo
mauritz1972 said:
I tried on 9.0, is not workin. Stuck at HUAWEI logo
Click to expand...
Click to collapse
Here the same, thats why i went back to 8.1.
Gesendet von meinem CLT-L29 mit Tapatalk
mauritz1972 said:
I tried on 9.0, is not workin. Stuck at HUAWEI logo
Click to expand...
Click to collapse
The module has been updated today. Can somebody confirm it now works on EMUI 9.0?
dark_saian said:
The module has been updated today. Can somebody confirm it now works on EMUI 9.0?
Click to expand...
Click to collapse
Latest 1.9.8 update causes me to be stuck in Huawei logo on my p20pro. Older 1.9.7 works ok on pie on my p20 pro with .168 ROM
UPDATE : Managed to get it working by flashing 168 patched_boot.img, but I can no longer run JDSP on .197 rom without getting stuck on Huawei logo...
To anyone who faced the same problem of getting stuck in Huawei logo after installing, flash back an earlier patched_boot.img (in my case 168), then flash the latest.
I strongly believe Huawei made some changes in the 19x rom causing it to stuck.
Did anyone managed to get it working on the latest ROM?
P0sixSplo1t_2 said:
Install instruction:
Frist uninstall other audio mod
Open magisk
Go to module
Add module jdsp(link in this tread, add www to download file )
install
Reboot
Enjoy))
Tested on huawei p20 pro clt-09
Download:
.dropbox.com/s/kiyy6iax9nckg0k/jdsp_v1.7.4.zip?dl=0
Click to expand...
Click to collapse
Installed fine on AOSIP (Honor 10 ROM) on p20 pro.
Cheers.
PS: had a thought in the back of my head that it may fix stereo but nah, all good.
Oreo 8.1
Latest 2.0 stuck on Bootlogo P20 Pro 9.0.0.203
How to remove flashed file?
House.m.d said:
Latest 2.0 stuck on Bootlogo P20 Pro 9.0.0.203
How to remove flashed file?
Click to expand...
Click to collapse
This working:
Install from magisk manager.
1-install Ainur_JamesDSP
2-install AINUR SAURON [MK III]
3-install Audio_Modification_Library
4-reboot
auras76 said:
This working:
Install from magisk manager.
1-install Ainur_JamesDSP
2-install AINUR SAURON [MK III]
3-install Audio_Modification_Library
4-reboot
Click to expand...
Click to collapse
I tired this and when I go to open JamesDSP it opens and closes straight away.
CaseyS said:
I tired this and when I go to open JamesDSP it opens and closes straight away.
Click to expand...
Click to collapse
Install on this order and should work,tested on mate 20 pro
auras76 said:
Install on this order and should work,tested on mate 20 pro
Click to expand...
Click to collapse
I did it in the order as followed. This is a P20 Pro thread which is what I tested it on and it doesn't work
auras76 said:
This working:
Install from magisk manager.
1-install Ainur_JamesDSP
2-install AINUR SAURON [MK III]
3-install Audio_Modification_Library
4-reboot
Click to expand...
Click to collapse
Works for me on my P20 Pro EMUI 9.0 build 251 --> https://forum.xda-developers.com/hu...awei-p20-pro-charlotte-l29c432b131-8-t3809964
cadkey said:
Works for me on my P20 Pro EMUI 9.0 build 251 --> https://forum.xda-developers.com/hu...awei-p20-pro-charlotte-l29c432b131-8-t3809964
Click to expand...
Click to collapse
Did you do something different or you just installed them and restart?
CaseyS said:
I tired this and when I go to open JamesDSP it opens and closes straight away.
Click to expand...
Click to collapse
Works flawlessly on EMUI 9.0.0.236.
nikifeto said:
Did you do something different or you just installed them and restart?
Click to expand...
Click to collapse
just install and reboot
Working for me too.
cadkey said:
Works for me on my P20 Pro EMUI 9.0 build 251 --> https://forum.xda-developers.com/hu...awei-p20-pro-charlotte-l29c432b131-8-t3809964
Click to expand...
Click to collapse
After the update to Pie .251, delete all modules that were installed in oreo. Install Ainur Sauron, JamesDSP, AudioMOD library and reboot. Everything works perfect.
Related
Anyone can help me to root Honor 8 FRD-L09 B389? I have bootloader unlocked and twrp 3.0.2-3 frd installed but after I install supersu is not rooted
C0oL3r said:
Anyone can help me to root Honor 8 FRD-L09 B389? I have bootloader unlocked and twrp 3.0.2-3 frd installed but after I install supersu is not rooted
Click to expand...
Click to collapse
First of all flash twrp 3.1.1-1 from one of the threads. You can flash it from your current twrp. Then google supersu 2.82 emui 5. You'll find a thread in the huawei p9 section of xdaforums and flash that. Its modified to work with emui. Then you're good to go
I solved, I installed twrp 3.0.2 and I flashed supersu r275 and I installed from google store phh supersu and now it s rooted
Good, does it work properly?!
C0oL3r said:
I solved, I installed twrp 3.0.2 and I flashed supersu r275 and I installed from google store phh supersu and now it s rooted
Click to expand...
Click to collapse
Please update it to 3.1.1-1, some bugs are fixed on that version.
C0oL3r said:
Anyone can help me to root Honor 8 FRD-L09 B389? I have bootloader unlocked and twrp 3.0.2-3 frd installed but after I install supersu is not rooted
Click to expand...
Click to collapse
U need a specific version of supersu to have rooted perfect
Yes , that supersu is separately build for emui . If u can be of some help . U can make a guide for rooting just on emui
Not mine my frn. It was build by an other dev. Search can help u .
You can actually use the latest SuperSU but first install the latest TWRP. It will work. The problem is that the vendor partition is unmounted by default. With the latest TWRP, the vendor is always mounted.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
You can actually use the latest SuperSU but first install the latest TWRP. It will work. The problem is that the vendor partition is unmounted by default. With the latest TWRP, the vendor is always mounted.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Exactly,Also the Official Supersu Works good link-->http://www.supersu.com/download
venugopalu007 said:
Exactly,Also the Official Supersu Works good link-->http://www.supersu.com/download
Click to expand...
Click to collapse
That's right. :cyclops:
Sent from my Honor 8 using XDA Labs
Does the latest magisk work with MagiskHide? I've found a version on the official thread but it isn't builded by @topjohnwu
ScardracS said:
Does the latest magisk work with MagiskHide? I've found a version on the official thread but it isn't builded by @topjohnwu
Click to expand...
Click to collapse
U can test that urself , if all goes well we can answer someone else.
gopinaidu77 said:
U can test that urself , if all goes well we can answer someone else.
Click to expand...
Click to collapse
I've test it... Sadly CTS fails
Hey,
I've created a small magisk module, with that you can use the Argument Reality function inside the Google Camera.
It works on LOS 15 and LOS 15.1, it works maybe also on nougat but I can't guarantee.
When you want to test it on other devices than the Mi5s, please don't forget to make a backup.
Installation instructions:
Every module can easily flashed inside the Magisk Manager or with TWRP.
Additional informations for all downloads:
Android 8.1:
Mini version:
only Includes the necessary configurations and changes in the build prop, to get it fully working you need additionally the Apps Package
Full version:
Includes everything you need, in one module.
(Modded GCam, ARCore, ARStickers and all configurations)
Android 7.0-8.0
Only one module with all necessary configurations you have to flash additionally the Apps module.
Downloads:
Android 8.1
https://drive.google.com/folderview?id=1SnsVQPuKyWQwJcMkWAO5pJaBJz6InrYH
Android 8.1 V2:
https://drive.google.com/file/d/1wuzRqYjG0uaB35kdyYaLK3-K-tW9Iag9/view?usp=sharing
Android 8
https://drive.google.com/folderview?id=1xz8CQD71B-i2jbzy08t9UY5CqJ8eZSJw
[Test] Android 7.0 -7.1.2
https://drive.google.com/folderview?id=1QeSXy9Du3RkZnhnTa_Z2eiVxAV6RdlbJ
Apps Module (for Android 7.0 - 8.0 and the 8.1 mini module)
https://drive.google.com/folderview?id=1YY97M5Y-r9MqJ6art8aYBQDWPLi8Hb6C
Apps Module V2:
https://drive.google.com/file/d/19rtu2nUAcH2WKCBbGbm2F75uXsfwKXt4/view?usp=sharing
Do not thank me, just thank him @Arnova8G2
Screenshots:
jigs4wkiller said:
Screenshots:
Click to expand...
Click to collapse
can you record a video, mine crashes.
357662149 said:
can you record a video, mine crashes.
Click to expand...
Click to collapse
Yes
jigs4wkiller said:
Yes
Click to expand...
Click to collapse
What rom are you using?
357662149 said:
What rom are you using?
Click to expand...
Click to collapse
Latest LOS 15.1 build.
jigs4wkiller said:
Latest LOS 15.1 build.
Click to expand...
Click to collapse
Me too, but get crashing when stop recording.i don't know why.
I can't record video too, it records and saves movie but it can't play. LOS 15.1 LASTEST BUILD.
Crash when i switch ar stickers menu, I'm in lates miui.eu develop btw.
i am using 15.1 and flash did not work with TWRP?
mrducluan said:
i am using 15.1 and flash did not work with TWRP?
Click to expand...
Click to collapse
Do you have magisk installed ?
I have installed magisk, and flash the latest TWRP and success. Thanks
Don't work on MIUI
Sadur said:
Crash when i switch ar stickers menu, I'm in lates miui.eu develop btw.
Click to expand...
Click to collapse
Same problem here. MIUI 9 global developer
Which version of Gcam is being used?
Also crashing on MIUI 9.3 (Xiaomi.eu latest) !
n0thing722 said:
Also crashing on MIUI 9.3 (Xiaomi.eu latest) !
Click to expand...
Click to collapse
At the moment I am using MIUI to find a fix.
This mod is work on HTC U11 too.
Thank you for share.
Android 8.0 Magicsk V 15.2
Updated OP.
V2 Modules are know made with Magisk 15 template and I updated the Gcam.
jigs4wkiller said:
Updated OP.
V2 Modules are know made with Magisk 15 template and I updated the Gcam.
Click to expand...
Click to collapse
Thanks bro, but still not working on MIUI 9 :/
Sent from my MI 5s using Tapatalk
I flashed android 8.1 v2, but i dont get the gcam
---------- Post added at 01:22 PM ---------- Previous post was at 01:16 PM ----------
Where to get the gcam?
REQUIREMENTS
1-MI A1 RUNNING OREO
2-MUST BE ROOTED WITH MAGISK
3-GIVEN FILES
PROCEDURE
AS EVERYONE VIPER IS ONE OF THE BEST AUDIO MODS EVER FOUND WHICH WORKS ON PERMESSIVE SELINUX ....
NOTE:- YOU MUST DISABLE ALL MAGISK MODULE BEFORE STARTING.
SO FIRSTLY U NEED TO FLASH SELINUX.ZIP THROUGH MAGISK
THEN REBOOT YOUR DEVICE
SECONDLY FLASH THE VIPER.ZIP THROUGH MAGISK
ONCE AGAIN REBOOT YOUR DEVICE
VOLA!!
VIPER IS INSTALLED ND WORKING TOO...
OPEN VIPER4ANDROID APP AND CHECK DRIVER STATUS IT MUST BE INSTALLED AND ENABLED
PROFIT?
BETTER AUDIO
ENJOY!!?
Does it fix audio hissing on headphones?
Doesn't work
coolkoushik07 said:
Doesn't work
Click to expand...
Click to collapse
Working great
p.chandra284 said:
Working great
Click to expand...
Click to collapse
Show me ur magisk version, oreo version
Sent from my Mi A1 using Tapatalk
coolkoushik07 said:
Show me ur magisk version, oreo version
Look
Click to expand...
Click to collapse
p.chandra284 said:
coolkoushik07 said:
Show me ur magisk version, oreo version
LookView attachment 4390213
View attachment 4390214
Click to expand...
Click to collapse
Dont know but its not working for me.. can u show me ur magisk modules list?
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
coolkoushik07 said:
p.chandra284 said:
Dont know but its not working for me.. can u show me ur magisk modules list?
....
Click to expand...
Click to collapse
Click to expand...
Click to collapse
How do I know if this works? I dont see any viper app after reboot. Also messes up the mi a1 sound tweaks. There are less volume steps with yours
Edit: Got it to work, but I have to disable ARcore modules
Hi, can you help me with my problem ?
Driver won't instal because I/O error, can u help me.
I am on Oreo Jan patch and having the same problem - "Driver won't instal because I/O error".
Any suggestion please.
p.chandra284 said:
coolkoushik07 said:
Show me ur magisk version, oreo version
Look
Click to expand...
Click to collapse
Which Susbtratum theme is it that u are using?
Click to expand...
Click to collapse
vikash1994b said:
p.chandra284 said:
Which Susbtratum theme is it that u are using?
LoNe 4SuBs
Click to expand...
Click to collapse
Click to expand...
Click to collapse
edkmho said:
I am on Oreo Jan patch and having the same problem - "Driver won't instal because I/O error".
Any suggestion please.
Click to expand...
Click to collapse
Remove first if you have a pin or pattern or password. It will work.
It's installed properly.
Now can you please tell me the best settings for it.
p.chandra284 said:
Remove first if you have a pin or pattern or password. It will work.
Click to expand...
Click to collapse
I just had the same problem here. Removed the password and then it installed with zero problems. Working fine. THANK GOD! How I missed Viper
after restarting again the io error comes in. should I leave it without password all the time??
Can i Flash this in Selinux - Enforcing Rom ?
Guys, this is old method, open magisk, search viper v1.6.9 by viper520 and install it.
Description
All you need to get NFC on GSI ROM's for Kirin 655 devices.
It's tested on Huawei P8 Lite 2017 (Kirin 655) while running phhusson's AOSP.
Download
Pie
Magisk:
Magisk's Official Repo
NFC4PRA-GSI.zip
TWRP: NFC4PRA-GSI-TWRP.zip
Oreo
Magisk: NFC4PRA-GSI-OREO.zip
TWRP: NFC4PRA-GSI-OREO-TWRP.zip
Changelog
v3.0
Removed unnecessary libs
v2.0
Bump to Pie (9.0)
v1.0
Initial release
Troubleshooting
If stuck at boot, simply reboot once and see if boot resumes
If boot fails again, please provide device and Magisk logs
Credits
topjohnwu for Magisk and its module template
Darkest-Dark for his Magisk Module that inspired this work
dil3mm4 for his version of LineageOS where the v1 files belonged to
haky86 for his version of AOSiP where the v2 files belonged to
kountry83 for his Pie NFC fix and where the v3 files belong to
Source
Magisk: GitHub
I'm honestly curious.
I will take a look, good try as first contribution here.
Welcome to Huawei strange world.
EDIT: Really nice contribution, tested and working.
Using this magisk module on resurrection remix o 6.1.0 when I press the fingerprint my pra-lx1 write a equal sign (=)! Will the twrp zip gives the same problem?
ZzManRoolez said:
Using this magisk module on resurrection remix o 6.1.0 when I press the fingerprint my pra-lx1 write a equal sign (=)! Will the twrp zip gives the same problem?
Click to expand...
Click to collapse
I believe your problem is not related with this module. Could you please check if this topic solves it?
Already done that thing to disable fingerprint navigation, the equal sign problem shows only when I activate this module on magisk, if the module is disabled there are no problem with fingerprint! I have asked because disable a module in magisk is a easy thing, remove a twrp installed patch is different!
ZzManRoolez said:
Already done that thing to disable fingerprint navigation, the equal sign problem shows only when I activate this module on magisk, if the module is disabled there are no problem with fingerprint! I have asked because disable a module in magisk is a easy thing, remove a twrp installed patch is different!
Click to expand...
Click to collapse
I am sorry, but I cannot help you. Is there any navigation gesture feature enabled on your ROM?
On phhusson's AOSP I don't have such problem. It is really weird as no files related with fingerprint handling are included in this module.
I agree with you on that, flashing a TWRP patch is different than flashing a Magisk module but you can always revert by flashing the system image from your ROM again.
Sorry, I have tryed another module and gave me the same problem, I don't know why but it seems related to magisk modules, I've installed Huawei camera module and The equal sign was here! Sorry for the trouble!
P.S. It seems that any Huawei related module activates fingerprint gestures, I have deactivate the gestures but everytime I install one of those two modules the gestures are activated! So strange!
does P8 Lite 2017 have NFC hardware?
panariga said:
does P8 Lite 2017 have NFC hardware?
Click to expand...
Click to collapse
Yes
Noel.89 said:
Yes
Click to expand...
Click to collapse
on all variants?
I have PRA-LA1 and NFC seems not working.
Which kernel you use and what system image? 8.1 or 9?
panariga said:
on all variants?
I have PRA-LA1 and NFC seems not working.
Which kernel you use and what system image? 8.1 or 9?
Click to expand...
Click to collapse
Don't know if all have it my pra-lx1 Variant does I'm on oreo cr droid can't get NFC to work on my phone with 9. 0
ZzManRoolez said:
Sorry, I have tryed another module and gave me the same problem, I don't know why but it seems related to magisk modules, I've installed Huawei camera module and The equal sign was here! Sorry for the trouble!
P.S. It seems that any Huawei related module activates fingerprint gestures, I have deactivate the gestures but everytime I install one of those two modules the gestures are activated! So strange!
Click to expand...
Click to collapse
This issue seems related with an incompatibility between phhusson's fingerprint navigation implementation and Magisk itself.
Please refer to this link - https://github.com/topjohnwu/Magisk/issues/521
panariga said:
on all variants?
I have PRA-LA1 and NFC seems not working.
Which kernel you use and what system image? 8.1 or 9?
Click to expand...
Click to collapse
Noel.89 said:
Don't know if all have it my pra-lx1 Variant does I'm on oreo cr droid can't get NFC to work on my phone with 9. 0
Click to expand...
Click to collapse
I believe NFC is not related with the device's kernel.
Currently, this module only supports Oreo (8.1).
In a couple of hours I will upload a Pie (9) version.
OP updated with Pie version!
Check the first page for the download links
I installed this module but I can't activate NFC..
How doest this work?
Mate 10 pro on RRos beta 3
Marcuss4 said:
I installed this module but I can't activate NFC..
How doest this work?
Mate 10 pro on RRos beta 3
Click to expand...
Click to collapse
This is exclusively for Kirin 655. Your device is a Kirin 970...
ponces said:
This is exclusively for Kirin 655. Your device is a Kirin 970...
Click to expand...
Click to collapse
Aah I thought I had a 655 too.
Sorry!!
Thanks for the response!
ponces said:
OP updated with Pie version!
Check the first page for the download links
Click to expand...
Click to collapse
Module v1.0 is working great on oreo rom on my kirin 950.
But... one slight problem : in magisk manager, v2.0 "update" is to be avoided as it is for pie. As it is for a different system, it's not actually an update.
Would it be possible to make 2 distinct modules, one for Oreo and one for Pie, so Oreo users don't have to skip the update ?
Thanks !
pix106 said:
Module v1.0 is working great on oreo rom on my kirin 950.
But... one slight problem : in magisk manager, v2.0 "update" is to be avoided as it is for pie. As it is for a different system, it's not actually an update.
Would it be possible to make 2 distinct modules, one for Oreo and one for Pie, so Oreo users don't have to skip the update ?
Thanks !
Click to expand...
Click to collapse
That was why I configured to be mandatory to use v2.0 with Magisk 17.0 or above only. But I guess you're already using Magisk 17 on Oreo, right?
Sent from my PRA-LX1 using Tapatalk
ponces said:
That was why I configured to be mandatory to use v2.0 with Magisk 17.0 or above only. But I guess you're already using Magisk 17 on Oreo, right?
Click to expand...
Click to collapse
Right, latest stable magisk is 17.1, i indeed use it on oreo
What magisk modules you guys are using care to share some? So far here's mine
Debloater works properly on Realme UI?
Madhuvrata said:
Debloater works properly on Realme UI?
Click to expand...
Click to collapse
Yes it works fine on realme UI I uninstalled the google bloatwares
How do you install magisk on realme ui? I thought twrp doesn't support android 10 yet
nickycarlo69 said:
How do you install magisk on realme ui? I thought twrp doesn't support android 10 yet
Click to expand...
Click to collapse
Im on a unlocked bootloader before I upgrade to android 10 i unlocked my bootloader as for the twrp its working fine im using this https://forum.xda-developers.com/realme-5-pro/development/recovery-twrp-3-3-x-realme-5-pro-realme-t4067113
Viper4android doesn't work after realme ui update.
Driver not installed and tried different methods without a result.
Any suggestions?
mido hamdy said:
Viper4android doesn't work after realme ui update.
Driver not installed and tried different methods without a result.
Any suggestions?
Click to expand...
Click to collapse
No Idea about that mate as I haven't used viper
have you tried using other audio mods im sure there are other's on magisk
killerhaha100 said:
Yes it works fine on realme UI I uninstalled the google bloatwares
Click to expand...
Click to collapse
What about realms bloatwares?
Madhuvrata said:
What about realms bloatwares?
Click to expand...
Click to collapse
Haven't touch the other realme software as I don't know what is needed might break some function