Complete idiot - HTC U12+ Questions & Answers

So, I successfully unlocked my bootloader, rooted with Magisk, got Adaway working and all was good.
Decided to change my system fonts, per a suggestion here I used the FontFix app.
Downloaded a font to my sd card, changed it in the app, and rebooted
After reboot I get the normal boot animation and then it hangs on the green HTC screen, nothing after that.
I can reboot to download/bootloader but nothing else.
I was on 1.30.617.2, should I flash that boot image or an RUU to get me back to stock?

If you flash a RUU image you will wipe everything and revert to a clean stock image of your phone. It should work properly, but like a brand new phone (with that version on it, depending on what RUU you flashed).
That means that your customization and internal memory will be wiped.

geoffwoerner said:
So, I successfully unlocked my bootloader, rooted with Magisk, got Adaway working and all was good.
Decided to change my system fonts, per a suggestion here I used the FontFix app.
Downloaded a font to my sd card, changed it in the app, and rebooted
After reboot I get the normal boot animation and then it hangs on the green HTC screen, nothing after that.
I can reboot to download/bootloader but nothing else.
I was on 1.30.617.2, should I flash that boot image or an RUU to get me back to stock?
Click to expand...
Click to collapse
Created a system image backup in TWRP? If not you should use a RUU to get it working properly again.
Sent from my HTC U12+ using XDA Labs

I just flashed a RUU and went from there, more of a pain than anything

Related

[Q] CWM wipe s-on Brick

Long time listener, first time caller.
I have the latest hboot 1.45.0013, S-On, Unlocked with HTC Dev Tool.
I used the Hasoon2000 tool to install SU, CWM, and a recovery image. I then used the instructions in the thread (http://forum.xda-developers.com/showthread.php?t=1508556) to install ICS and obtain root installing pyr-o-ice sense 1.1.1 (http://forum.xda-developers.com/showthread.php?t=1469615) Everything worked, created nandroid backup and installed titanium.
Some buttons didn't work, so I looked for updates and found Virtuous ROMs. So, I used CWM to clear dalvic, flashed boot image of the Virtuous Inquisition then used CWM to install zip. Bootloop. ROM just hangs on black screen with white V for 15 to 20 minutes.
MT4GS thread stated that Primadonna and Inquisition were comparable, so I followed the same proceedure, flashed Primadonna boot image then installed ROM through CWM. This time there was tmobile splash screen, but the same system hang.
At this point I tried to restore a recovery, but CWM could not find one. Used Astro to delete all boot images from SD root, assuming this may be the problem, and flashed a Virtuous ROM again. Same problem.
Based on this thread, I thought it might be the kernal, and tried flashing the pyr-o-ice boot image that worked initially. (http://forum.xda-developers.com/archive/index.php/t-1628171.html). No dice. CWM could not install the ROM (error 1)
So, at this point, I used CWM factory reset and wipe all data. And of course that made things worse, because the SD card with recoveries was wiped. I used adb to push the recoveries from Hansoon's toolkit, but stock recovery was not available (red triangle screen hang) and cwm could not mount the SD card.
So, at this point I used CWM to format SD card (blank anyway), and at this point adb failed to recognize the decive and I could no longer fastboot into recovery or hboot through adb. (volume down + power stopped working with pyr-o-ice install)
if i remove the battery and hold power + volume while using an adb reboot hboot command i can get into hboot about every 10th attempt. adb doesn't recognize the device ("waiting on device", or adb devices yields a blank list); however the phone in hboot will transfer to usb fastboot when connected with a cable.
i looked at pushing a zip file through adb to the sd root, but that was ineffective (adb does have write access to the sd root, maybe because i am s-on?). i purchased a second sd card, and copied the recovery images from hansoons toolkit and rebooted into recovery. still went to tmobile splash, followed by V-screen bootloop.
i looked at placing a stock ruu on the sd and naming the file PG59IMG.zip, but because i'm S-on i can't flash radios, so that's out.
So, here we are. Iffy access to fastboot, 2 sd cards, a lot of determination, and a persistent bootloop.
Can someone, PLEASE help me?
Thanks!
AFAIK, you cannot flash the boot.img with CWM if you are S-ON, you *MUST* use Fastboot to flash that. So, before you messed it all up, if you had just extracted the boot.img from the ROM and flashed it using Fastboot, it likely would have worked just beautifully.
Try booting into recovery and doing a regular flash of the ROM, THEN a fastboot flash of the boot.img.
SOLVED!!
Thanks to the folks heading up the HTC Unbricking Project (http://forum.xda-developers.com/showthread.php?t=1627881) ESPECIALLY Dexter93!! who patiently unraveled this for me, and Blue6IX for the Restore to Stock instructions in the Developers Reference Guide (http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24) I'm back to stock, and ready to try it all again!
Can someone send me an apk that automatically clicks the thanks button for selected developers at regular intervals?
Thanks again!
Solved???
Fuzi0719, thanks for your reply. I may have written this inappropriately, but what coded in the command prompt was "fastboot flash boot boot.img".
The ROM zip file was placed on the SD card, and I rebooted into recovery, and used CWM to install zip from SD. I'm new to this so I may have used the wrong term for installing the zip through CWM, the boot image file was always handled through the above command.
I'm back to "stock" at this point, but when I boot into the bootloader, the phone looks for PG59DIAG.zip and PG59DIAG.nbh before PG59IMG.zip.
It then asks if I want to install the update. (This is after I have already installed the "update", and the phone reset itself even with my old wallpaper.) When I got to the home screen there was a white circle in upper left corner of the status bar, with "check content" message. Each time the screen locked (default 30 seconds) unlocking it took me to the mytouch splash screen with the green circle and white background for about 10 seconds before resuming.
Each time I check to see if the phone registers requiring any updates. It doesn't. Two installs of the PG59IMG.zip. "recovery" eliminates the unlock splashscreen, and wiped any customizations. However, the phone will not manually boot into the bootloader; I have to use adb. Hboot reinstalls the PG59IMG.zip as an update every time.
If I accept it reboots within seconds like a fresh doubleshot. If I decline the "update" it reboots to the Tmobile MyTouch 4G Slide text splash screen, then moved to the green circle screen for a few minutes before I get to the homescreen.
Blue6IX was looking for help with these last month (http://forum.xda-developers.com/showthread.php?t=1580077), so maybe they are just extraction files that HTC sends with the OTA update that would prevent my phone from trying to install the "update" every time?
In any case, my question at this point is after coming from such an unstable point with my phone, is this what every relocked bootloader does? Or, is this a problem that means something else is still wrong with the system? Because taking it back to stock has not solved this.
Thanks.
Thanks for clarifying, you wouldn't believe the number of people who fail to follow that one simple step of fastboot flashing the boot.img, so that's why I stated that. So, now you have the phone relocked, and running a stock ROM (the 1.55?), but with CWM 5.0.2.7? Were you wanting to update to the 1.63 ROM? I'm unclear on what it is you want to do. For one thing, if you've already flashed the PG59IMG then I would delete it off the sd card so it doesn't keep trying to load it.
Yup.
It was just that simple.
Mainly I wanted to make sure that my phone was stable before I went back to unlock the bootloader, etc.
Went back to HTC, got a new token (just in case), and I'm creating a nandroid backup right now. Thanks.
I really appreciate it.
Hopefully the next time I get stuck, it's just as simple to fix, but far less embarrassing.

[solved] OTA update (176.44.1) fails w/ CWM or ends in bootloop w/ stock recovery

Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Kleo2 said:
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Click to expand...
Click to collapse
If your phone is rooted or there is a CWM installed or there is any change in system files then ota will fail till you flash stock rom. You can't just bring back stock recovery. You have to "delete" root as well.
There is some info http://forum.xda-developers.com/showpost.php?p=47495650&postcount=6
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
CromoPT said:
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
Click to expand...
Click to collapse
Hi, thanks for your replies. Because of your report and others, who state the same (installing stock recovery only to get the update working) I was hoping to get around going back to full stock. It always takes a lot of time to configure the phone the way it was configured before essentially wiping.
Just to repeat what I did: when I try to install the OTA while CWM is installed there's just an error message in CWM, the update fails, but the phone is working normally afterwards. It's just not updated.
When I try with stock recovery the update process finishes without errors, but the phone get stuck during the boot animation.
Maybe there's a way to fix the boot loop?
Looking forward to any suggestions
Cheers, Kleo2
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Kleo2 said:
I tried again and found a way without going back to full stock.
Click to expand...
Click to collapse
Thanks. :good: Did 1 to 3 and phone booted just fine (not stuck on boot animation)
My phone: No logo fix, root, Xposed Framework
After update root was still there, Xposed needed a new install
total noob
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Papshmir said:
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Click to expand...
Click to collapse
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Thanks!
Kleo2 said:
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Click to expand...
Click to collapse
Thanks,
Wiping cache and dalvik cache did the trick for me. You saved my day
Please please help
I have the same problem. I've tried to update the new OTA and failed. After restoring full stock rom, the system simply doesn't boot!
I had Faux Kernel and GravityBox but I didn't revert anything. I thought that a full stock rom would clear all system settings.
This is my version of stock (Blur_Version.174.44.9.falcon_umts.Retail.en.GB) and I tried to flash it several times now. No success. I get stuck on the boot logo.
I tried to downgrade to 4.3 using version Blur_Version.14.71.8.falcon_umts.Retail.en.GB. I was able to boot and see the initial setup but I have no WIFI! I was trying to install 4.3 then try to update via OTA but OTA only works with WIFI so I'm stuck.
I also tried installing the 24th Feb nightly build of Cyanogen and the device also booted but with no WIFI.
I really don't know what to do! Please help me. I've tried other stock images out of despair but none with sucess.
Does anyone have a clue to what might be to problem and how to revert it?
Thank you
draco259 said:
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Click to expand...
Click to collapse
Before flashing stock ROM try to clear/format all your partitions with a custom recovery!
Sent from my XT1032 using xda app-developers app
I installed the OTA update using the CWM recovery but not root, I changed the update-script to not give error during installation
Hui91 said:
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
Click to expand...
Click to collapse
At part 8, I am getting an image of the android guy with his stomach open with a big red '!'. That's 'no command' right?
Any ideas? I have no idea what I am doing
Guys, a really easy way to update is:
1. Install Philz recovery - http://forum.xda-developers.com/showthread.php?t=2639583
2. Reboot and then download the OTA update when prompted - select Install when prompted
3. It will now reboot into Philz recovery, install the update and reboot
4. You'll see Android is Upgrading...
5. Re-boot back into recover and re-install faux kernel
I have just upgraded my XT1032 on 174.44.9 en GB (rooted + faux008) to 176.44.1 using this... worked like a dream! All I had to do was re-install faux kernel as that was overwritten by the OTA, but Root was in-tact...
i have root, twrp recovery and faux kernel, the problem is only faux kernel? Or I must remove all? (root recovery etc)

[Q] M8 Frozen During Boot

Just received this phone yesterday with most recent OTA from Verizon, got home and immediately rooted with WeakSauce2 unlocked/s-off with Sunshine and installed latest TWRP with Flashify (no issues encountered). Booted into recovery and did full wipe before realizing I didn't have InsertCoin on the SD card (careless mistake) and tried to reboot so I could download the ROM and install it, but the phone always froze at the first white HTC screen and would not boot. I put my SD card back in my old GS3 and downloaded the ROM and put it on the card that way, put the SD card back in the M8 and went into recovery, wiped and installed the ROM (Aroma installer ran, said everything was fine). I am now trying to reboot and the phone is still getting stuck on that first white boot screen. Thoughts on this issue? I have access to bootloader and recovery.
prinzmetal6 said:
Just received this phone yesterday with most recent OTA from Verizon, got home and immediately rooted with WeakSauce2 unlocked/s-off with Sunshine and installed latest TWRP with Flashify (no issues encountered). Booted into recovery and did full wipe before realizing I didn't have InsertCoin on the SD card (careless mistake) and tried to reboot so I could download the ROM and install it, but the phone always froze at the first white HTC screen and would not boot. I put my SD card back in my old GS3 and downloaded the ROM and put it on the card that way, put the SD card back in the M8 and went into recovery, wiped and installed the ROM (Aroma installer ran, said everything was fine). I am now trying to reboot and the phone is still getting stuck on that first white boot screen. Thoughts on this issue? I have access to bootloader and recovery.
Click to expand...
Click to collapse
There's always the ruu option so you can at least get a booting phone. You can run it via pc or off your sd card in boot loader.
Sent from my HTC6525LVW using Tapatalk
dottat said:
There's always the ruu option so you can at least get a booting phone. You can run it via pc or off your sd card in boot loader.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply, that's the route I went and now I'm on 4.4.4 stock rooted, still unlocked and s-off and I've realized (after testing with multiple roms) that when I try to install anything custom it always freezes on first boot screen. Until I figure it out, it looks like I'll be on stock
prinzmetal6 said:
Thanks for the reply, that's the route I went and now I'm on 4.4.4 stock rooted, still unlocked and s-off and I've realized (after testing with multiple roms) that when I try to install anything custom it always freezes on first boot screen. Until I figure it out, it looks like I'll be on stock
Click to expand...
Click to collapse
Can you double verify your boot loader is in fact unlocked?
dottat said:
Can you double verify your boot loader is in fact unlocked?
Click to expand...
Click to collapse
Verified just now, unlocked and s-off
prinzmetal6 said:
Verified just now, unlocked and s-off
Click to expand...
Click to collapse
Can you show me the output of
Fastboot getvar all
Edit out your imei and serial number.

Multiple recoveries installed

I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
theoden144 said:
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
Click to expand...
Click to collapse
To solve this, you could get phone into Fastboot and flash Dottat's RUU for the M8 - he made several versions.
For sure, add HTC_Fastboot.exe to your ADB folder and use it, NOT regular fastboot.
It will overwrite your previous recovery with stock and fix your phone. Then later, you could flash TWRP 2.8.7 thru Fastboot.
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
cntryby429 said:
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
Click to expand...
Click to collapse
I would flash firmware or ruu, if indeed he flashed recovery to wrong partition, that partition needs the correct one which firmware wlil do, and ruu will 100% do.
Personally I'd run ruu, go to stock recovery and run a factory reset.
theoden144 said:
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
Click to expand...
Click to collapse
Gotta use ADB and HTC_Fastboot.exe
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
theoden144 said:
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
Click to expand...
Click to collapse
Twrp manager is not a safe way to flash recovery because they aren't flashing by block name yet. They are still hard-coded to block number. The partitions have changed during ota already...so the app does hose things up a bit.
Sent from my Nexus 6 using Tapatalk

HTC one A9 boot loop

So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
PHYN1X said:
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
Click to expand...
Click to collapse
What version of SuperSU did you attempt to install? It sounds like you may have used a version that didn't patch dm verity and attempted to install to system, or something went wrong with the installation process.
I suggest you boot to download mode and flash the latest RUU for your version. You'd then have a clean slate to flash TWRP and the latest SuperSU to.
PHYN1X said:
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
Click to expand...
Click to collapse
I would also suggest starting over with the RUU for your model. Once you get TWRP back however you may want to take a look at this thread http://forum.xda-developers.com/one-a9/development/rom-a9-base-roms-recovery-flashable-t3282335 for some pre-rooted stock ROMS. I'm running the Sprint one with Xposed/GravityBox right now and it's great.
CSnowRules said:
What version of SuperSU did you attempt to install? It sounds like you may have used a version that didn't patch dm verity and attempted to install to system, or something went wrong with the installation process.
I suggest you boot to download mode and flash the latest RUU for your version. You'd then have a clean slate to flash TWRP and the latest SuperSU to.
Click to expand...
Click to collapse
I used 2.46
I ordered a micro sd to usb stick so I'll be able to actually get the RUU file onto the sd card so it can flash it, I have to do it the SD card way because it isnt recignized by my computer because it doesnt trust it
Did you try re-installing drivers and flashing new recovery with fastboot?
PHYN1X said:
I used 2.46
I ordered a micro sd to usb stick so I'll be able to actually get the RUU file onto the sd card so it can flash it, I have to do it the SD card way because it isnt recignized by my computer because it doesnt trust it
Click to expand...
Click to collapse
I believe SuperSU 2.46 was your problem and that a RUU is not required to fix this. The older SuperSU broke the dm-verity for your system partition, which is enforced by your kernel. Flash SuperSU 2.76 (the latest stable release). This will automatically patch your boot partition. You will not be able to take an OTA until flashing the stock system image, though.
You just need to fastboot flash TWRP back to your device, first (fastboot flash recovery twrp.img) just like the first time from download mode--not the bootloader. Unlike ADB, your phone doesn't need to trust your computer.
If fastboot doesn't work, check what creusset said.
creusset said:
Did you try re-installing drivers and flashing new recovery with fastboot?
Click to expand...
Click to collapse

Categories

Resources