Database Info

MT6589 - FiX IPS LCD High Rate Auto Brightness

FiX Anormal IPS LCD AUTO Screen Brightness
Well i don't know how many of u are using the device thl w100 at night.
but when do well the IPS lcd screen it shows a very bright light and exposing uor eyes to this crap well we might end blind, because the crappy IPS displays a very, very bright light and for looking into device in complete obscure/darkness it will ill uor eyes.
So if a company don't care for such a (after my opinion) a very delicate true
related to our health and care, some others do care.
​Here it is.
FiX Anormal IPS Screen Brightness
Protect Uor Eyes from creepy high exposed brightness
Improve Battery with many %
now u can use the device in obscure or night without forcing uor eyes anymore​ Basic aprox calculation based on using the device in obscure environment or into the night:​ ThL or MT6589 or Default Any Other IPS LCD AUTO Brightness Settings​ without charger = warning ! creepy high dangerous value (will ill our eyes)
with charger = warning ! creepy high dangerous value (will ill our eyes)​
​ RO.EDi alternative​ without charger = reduced by 25%
with charger = reduced by 62%​
​ Conclusion: RO.EDi's Alternative is Safer & Acceptable for our Eyes / Health
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

App to change resolution to safe battery HTC one M8 battery

You can safe battery more on HTC M8 by set the screen resolution and dpi.
recommend setting for M8 is 720x1280 dpi 320..
you can use app below to set it.
and this app also have power menu soft key for power off,reboot and reboot recovery your phone..
this app require phone rooted.... and require grant acces for super user
You can download this app from google play
https://play.google.com/store/apps/details?id=com.bobo.Resolution_power&hl=th
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

first of all I am sorry about that picture
secondly the link is down
thirdly I dont think this would affect battery by any mean it may slow the cpu or gpu a little bit but wont affect dramaticlly as the screen will still be 1080 pixels hungry for power
cheers,

RedBlackPellet said:
first of all I am sorry about that picture
secondly the link is down
thirdly I dont think this would affect battery by any mean it may slow the cpu or gpu a little bit but wont affect dramaticlly as the screen will still be 1080 pixels hungry for power
cheers,
Click to expand...
Click to collapse
Update link and have some update version on this app.
this app can help more battery safe on G3 with coming with 4k resulotion. and help a bit 10-15% on my wife's M8.
After set new resolution try to re-boot phone with disable both option "apple default before power off" and "Re-apply setting after power on" ,then it will get small icon and screen on M8.

Now have the update version for improve setting

How much screen bleeding is normal?

Hello,
I bought the RN6P recently and noticed there were some reports about a backlight bleeding issue like on the Poco F1 on the internet. But I also saw other people mention, that a certain amount of bleeding is normal, since the screen is being lit from the side.
So I took a picture and I want you opinions on this. The 'bleeding' appears on the chin (maybe 1 - 2 mm; you can see it fading away towards the corners of the screen) and on the top (not really visible on the picture) of the phone, is this a normal ammount or should I try to return it?
From the Xiaomi Forums (better pic quality):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mine:

well usually there are some bleed mostly around notch as you must have read it, but I am not sure if this yellow ting on the down side is real or just present on this photo - however if it is seen in real this yellow-ish like, it is quite not normal, as it is not close to the screen end, but is rather centered .. I would try to return/replace the piece at the reseller, if possible.

clemenza011 said:
well usually there are some bleed mostly around notch as you must have read it, but I am not sure if this yellow ting on the down side is real or just present on this photo - however if it is seen in real this yellow-ish like, it is quite not normal, as it is not close to the screen end, but is rather centered .. I would try to return/replace the piece at the reseller, if possible.
Click to expand...
Click to collapse
That yellowish stuff are just the apps on the screen. I was reffering to the chin, where it's the most obvious. It's not as bad as with the Poco F1, but it still catches my eye time to time.

Display size

Does anybody know where i can find the Display size option? i want to make it smaller but i only found the font size.
Like this one in xiaomi devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

If you're referring to DPI, it's located in Settings\More Settings\Developer options look for Drawing and Minimum Width within Drawing section. You enter your numbers in there. Just remember the phone screen DPI is 388. Never experimented with it but give it a try and let us know. Don't know if the screen with default to an acceptable number if you go overboard with your numbers.

Saloei said:
If you're referring to DPI, it's located in Settings\More Settings\Developer options look for Drawing and Minimum Width within Drawing section. You enter your numbers in there. Just remember the phone screen DPI is 388. Never experimented with it but give it a try and let us know. Don't know if the screen with default to an acceptable number if you go overboard with your numbers.
Click to expand...
Click to collapse
Thanks. thats exactly what i wanted. My default was 360 on Nex S global and i went to 403 and everything seems to be working. The stock camera beauty icon position is abit off but everything is working. No app crashes.
Now i can see more stuff on screen with everything smaller

also im not sure if its a placebo effect but my fingerpring is working better now or maybe im getting the hang of it.

Good to know you can go higher. I'll give it try and see if I get the finger scanner placebo effect too.

Power-saving feature | How to completely disable?

Having a very annoying issue with my 5 II where it does not show the correct time on the ambient display. It can be over an hour or two behind sometimes, specially at night, but sometimes during the day as well. I figured might have something to do with a battery saving option somewhere so I went through the settings and turned everything possible off.
In the Battery usage setting page both Screen and Ambient Display are on top naturally and both have "Power-saving feature" Applied. When I tap on it to change it loads a long list of apps, most of which also have the feature applied. However, there is no Screen and there's no Ambien Display in either list where I could change the setting to Excepted instead of Applied. So I went one by one and disabled the feature on all the apps in the list, but unfortunately Screen and Ambient Display still show that the feature is applied.
Where can I change this setting? How do I disable Power-Saving feature completely? Am I even looking at the right things to solve this issue?
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

To solve the ambient display notifications + clock lag, please try this:
Settings - Display - Lock screen preferences - Ambient display - When to show Ambient display - select "Smart activation"
This is something that happens on many phones, including Google Pixel 2 XL.
This setting prevents deep-sleep for ambient display.