Database Info

Need stock recovery from B119

Hi my phone came with 4.4.2 V100R001C00B119 and i tried some things and ended up with bricked device.
The only thing that is working is TWRP recovery, i tried lots of stuff even flashing full room over fastboot img by img but no luck.
Currently phone can go into fastboot and there i can flash TWRP, and thats it. Bootloader is unlocked. It just shows huawei logo and rebots and its like that for last 3h.
So from what i discovered i need to flash recovery that was originaly there when i took the phone to play with, but its just that it is impossibile to find this firmware out there.
Any help will be much appreciated.
Thanks
Alex

OnePlus one does not go into recovery after updating it

Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.

Molex69 said:
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Click to expand...
Click to collapse
I guess you didn't read the OP of Oxygen Os correctly,he clearly mentioned that this 'Tuga Power Recovery' is patched to work with Oxygen Os's firmware and one should not flash any other recovery.Now,what you can do is this,
https://drive.google.com/file/d/0B-ikULjZZlloNHpOdVBrTzQxZzQ/view?usp=drive_web
> Download This file, install it somewhere and run Revert-2-CM.exe. Make sure you have fastboot drivers installed or it wont work.Avoid using any Antivirus program while doing this as they might give false alarms.After this you'll be restored to TWRP then you can flash any rom you want.The reason due to which you weren't able to find 'TugaPower Recovery' on TWRP page is because this is an Unofficial Recovery.

Question
What does the program do with the OPO?

If you are familiar with fastboot commands, this method should work. Had my OnePlus in the same situation last night messing around with Efidroid. Phone was bootlooping. Efidroid boot menu as well as recovery mode were both inaccessible. I had tried several other things but none worked for me. *CAUTION: this method did ERASE my userdata.* I downloaded a fastboot-able stock full firmware zip, then manually reflashed device. My beloved OnePlus is no longer my daily driver but still my fave device to experiment with so I just used COS 13.1 file. After full reboot, I downloaded and flashed official TWRP. Device is fully functional again, but without OOS installed.

Molex69 said:
What does the program do with the OPO?
Click to expand...
Click to collapse
It'll change your firmware and alter your recovery to a functional TWRP.You'll lose Oxygen Os after doing this.Though you can use this anytime when not being able to flash TWRP.

What should i do
Thanks a lot thanks to the method you told me my OPO has recovery again really thanks, but I have a question, I still in the TugaPower recovery, should I flash the stock recovery or the newest version of TWRP?
Because I do not know if flashing again the TWRP will happen the same

i accidentally flashed a custom rom over oxygenos lol help (really though help)

Hi.
So this was pretty stupid of me. I was trying to flash LiquidRemix onto my OP6, but I forgot to wipe the system partition. Flashed the rom, then blu_spark twrp, and rebooted into recovery to flash gapps and all. Got a black screen with a static LED. Didn't think that was a big issue cause this has happened before with normal TWRP on OB6 or OB7. Tried hard resetting to see if I could get into system, same result. Tried fastboot flashing 9.0.2, no help. And finally tried flashing OB9 via fastboot, and also no help.
I've reverted back to my tiny S6 and have sent repair request to OP. I haven't gotten anything back yet, so I thought in the mean time, I'd look for help on XDA and try to fix it before having the chance to send it in.
Any help/advice would be greatly appreciated.
Cheers
// EDIT
Figured out how to fix it. Used the MSMDownloadTool to unbrick my device. Worked wonders. Thanks to r/oneplus Discord

I did something like that I had to format data after I flashed the stock rom

mightyblazer said:
I did something like that I had to format data after I flashed the stock rom
Click to expand...
Click to collapse
How did you get to format? I really can't get into the OS or recovery at all

I was actually able to boot into TWRP maybe you can get into fastboot? And try flashing TWRP again

mightyblazer said:
I was actually able to boot into TWRP maybe you can get into fastboot? And try flashing TWRP again
Click to expand...
Click to collapse
I'm able to get into fastboot, but even if I fastboot boot [insert twrp file name here], it'd still result in the blank screen and static LED

Hmm I don't know then sorry

Try
fastboot flash boot twrp.zip
Then
fastboot reboot
You will need to use full stock rom first before doing anything else though.

I was in the same boat as you the other day. I flashed different versions of twrp until i managed to boot one because some twrp isn't compatible with pie.

Lol I never wipe system...

Might sound like a "hard-bricking" issue since you cant boot into the OS nor recovery. There 's a hard brick recovery guide, but it'll put you down to oreo OOS: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
As long as you can boot into fastboot, you can follow the guide's process with no problem.

Fastboot Bootloop

I got my OnePlus 7 Pro today and tried to install Magisk by patching the boot.img. After trying to flash the patched image, I now have an issue where rebooting the devices leads me straight back to the bootloader. Trying to enter recovery also leads me straight back to the bootloader. I tried flashing the original boot.img I extracted from the OTA update file provided by OnePlus, but it still isn't working. I do not have TWRP or any custom recovery installed. Any help would be much appreciated. I noticed similar threads, however they all installed twrp, though I haven't yet as trying to run "fastboot boot twrp.img" always resulted in it booting to a screen saying "fastboot mode" which wasn't terribly helpful.
Edit: Its not the tmobile/5g/carrier version. I purchased it through OnePlus' website though I forget the exact model number.

Well, "fastboot boot twrp.img" does not work on all devices, sometimes you have to use: fastboot flash boot insert_twrp_img_name_here.img​Learned that the hard way, also use the unofficial twrp from mauronofrio.
Had the same problem as you have, and fixed it with that unofficial twrp.

Faith1105 said:
Well, "fastboot boot twrp.img" does not work on all devices, sometimes you have to use: fastboot flash boot insert_twrp_img_name_here.img​Learned that the hard way, also use the unofficial twrp from mauronofrio.
Had the same problem as you have, and fixed it with that unofficial twrp.
Click to expand...
Click to collapse
Did you need to completely revert to stock after the issue, or did flashing twrp fix the fastboot loop?
Edit: Trying to flash the stock fastboot rom currently as flashing twrp did nothing probably because me trying to fix it broke everything. Hopefully the stock rom will get everything back to a working state where I can try again, just this time flashing twrp.
Also using windows this time instead of linux....

mnbvcxzl90 said:
Did you need to completely revert to stock after the issue, or did flashing twrp fix the fastboot loop?
Edit: Trying to flash the stock fastboot rom currently as flashing twrp did nothing probably because me trying to fix it broke everything. Hopefully the stock rom will get everything back to a working state where I can try again, just this time flashing twrp.
Also using windows this time instead of linux....
Click to expand...
Click to collapse
Ok, so, trying to restore stock seems to have failed miserably.... any advice is most welcomed qq

OK.... so trying to unbrick the device using the msm stuff, I couldn't even make it to the downloader screen. After holding volume +/- and powering off, my screen is now black HOWEVER the phone gets detected by windows when I plug & unplug it. I have no idea what to do anymore. Someone please help

Figured I'd give the solution here in case someone else is in the same exact problem as me:
Follow the instructions over at https://forum.xda-developers.com/oneplus-7-pro/how-to/op7pro-collection-unbrick-tools-t3956595
I tried to de-brick it using the fastboot roms and all that, no dice. The only thing that seems to have worked was following the above and using the msm tool. Everything wiped, but hey, at least the phone is bootable again and now I have a way to fix it should this happen again. Yay for happy endings.
Edit: Also, following Faith1105's advice, flashing twrp to boot instead of trying to just boot it first worked successfully and from there I was able to install magisk.
Edit 2: Now wifi isn't working.... why life, why...
Edit 3: OK: EVERYTHING IS GOOD NOW. Twrp ran into a boot loop issue, used twrp to flash the most recent android 10 zip, rebooted and was greeted by stock recovery, then used that to wipe absolutely everything and reboot. After skipping through initial setup and making use wifi was working I rebooted again and this time tried booting twrp the way the usual instructions say to, this time it worked for whatever reason so once that started I used twrp to flash twrp's installer and magisk. It looks like everything is working correctly now. If you have the same issue maybe this stuff will work for you or maybe not: I don't know, and honestly I'm now brain dead lol.

OnePlus 6 suddendly stucks on boot animation

Hey folks,
I have a big problem.
My OnePlus 6 suddenly stopped responding today and then the power went out. When I restart I can no longer get out of boot animation. Although I thought I had a custom recovery this is also stock again and unfortunately I also no longer know for sure which Android version I last had.
So I downloaded the firmware here and wanted to flash it via fastboot.
Software Upgrade - OnePlus.com
Get the latest OxygenOS updates for your device.OxygenOS is always evolving. Learn about the latest features and improvements, and get even more out of your device.
www.oneplus.com
I can switch to fastboot mode, but I read that I can't flash full OTA zips there. So I wanted to try it via adb, but the stock recovery does not seem to have this function.
Fortunately I do not often have problems, but that's why I'm stuck now.
If possible I don't want to lose any data.
I hope someone can help.
Thanks!
mcdy

Download official twrp, use Fastboot to boot into it
Fastboot boot twrp.img

vkass said:
Download official twrp, use Fastboot to boot into it
Fastboot boot twrp.img
Click to expand...
Click to collapse
Hey, so TWRP works meanwhile officially on actual Android versions? Last time I tried only mods maybe works. Thx

Hey @vkass
haven't time to do it earlier.
The part with the TWRP works well but when I try to flash "OnePlus6Oxygen_22.J.52_OTA_052_all_2103022341_f3ff04643ea24e51.zip" after reboot the phone is only able to boot into Recovery (of cource default recovery).
Do I need to install Magisk?
Would have tried with the "Magisk-24.2.zip", but TWRP says it is invalid.
Thanks!
mcdy

Because you flashed an old android 10 zip.
OnePlus6Oxygen_22.J.62_OTA_0620_all_2111252336_14afec75dd6fa.zip | by OPTeam for OnePlus 6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com

Hey @vkass
thanks for your fast reply.I thought that's the last version becouse it is linked here: https://www.oneplus.com/at/support/softwareupgrade/details?code=PM1574156173727
Anyway I now downloaded the last version from Android Filehost: https://androidfilehost.com/?fid=7161016148664850007
But unfortunately, that just brings me back to my original problem.
I see now again the boot animation and since I unfortunately do not know any method with which I could see where there are problems, I only could wait for some time an hope.
Any other ideas?
Thanks!

Backup what you can with twrp, factory reset and reflash

Hey @vkass
I was afraid you were going to say that.
Because of WhatsApp, Googe Authenticator App and other banking apps it would have been great to get access again. But, since the system unfortunately does not provide any info at boot time, I do not know what else would be possible.
Somehow strange that there are no logs.
I would have also tried to reinstall Magisk and also uninstall it, but unfortunately without success. For whatever reason I come after the installation of TWRP via TWRP now even again only directly into the recovery (but no password query comes) and a boot of the system does not work at all.
Thanks!