I have been using this phone for 4 months and it was pretty stable, but somehow when I installed xposed framework. It triggered a message "Encryption unsuccessful". I tried to press the reset button, it switched me back to TWRP but it won't work and ended up with "Unable to mount /data"
Later on, I tried to install stock rom, but it said that my device wasn't compatible because it is not WW_Phone but a "omni_z01G"
I didn't encrypt my phone by the way, the phone do it itself.
Please help. Would be a pleasure if someone do know how.
Oops, wrong section
Sorry, posted in wrong section.
Related
Last night I decided to switch to ART from Dalvick runtime. Ever since, when android finishes loading, I get the error message "Unfortunately, Android System has Stopped." I've tried returning to stock (I'm rooted) and neither of my windows computers can see my phone which is weird because I unrooted my LG G3 recently with no problems. I've performed a hard (factory) reset numerous times. Sometimes the android system loads up OK but as soon as I reboot or power down I have the error message again. I'm at my wit's end. I can't return the phone because it's still rooted and I can't get it to work. When it boots, the LG screen appears normally. The At&t screen appears normally. Please help! I'm desperate.
If you're okay with losing info, give this a shot. I'm not sure exactly why it's doing this unless you had xposed framework before. Anyway, follow the steps and it should fix it. I'm not sure if you've tried going into the boot loader yet and doing a factory reset through there. So you can try whatever you like
http://forum.xda-developers.com/showthread.php?t=2785089
I can't get a computer to recognize the phone. I have tried a hard reset and I still get the error message. Any other ideas?
I had the same issue after I tinkered with something I shouldn't have tinkered with. I think I installed GravityBox, didn't like what it did, tried to factory reset, and started getting the Android System error consistently.
That link mcnick posted will serve you well. I would however use this thread since it's tailor made for the AT&T variant.
http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
First of all, I am sorry for making new thread. But it seems that I've tried searching everywhere for the solution but I couldn't find any.
Here is my problem,
Last few month, I flashed my P3100 to OmniRom. It works perfectly!
But for a past few weeks, I got gapps suddenly stopped working. As I know what to do, I reset my P3100 by wiping all data using Philz recovery.
And then it worked fine again.
Unfortunately, for last three days. It happened again.
So I repeated the same whole thing as I did again.
The problem is, when I tried to reset all data, it won't work. I mean, it looked like I didn't reset anything. Thus, my tablet keeps on showing this message such as gapps has stopped.
I tried to download new ROM. And flashed it via Philz recovery. But it's not working. It remain the same as if nothing happened. I'm still haven't sleep for 3 days looking for a solution. Would somebody here help me? As I really really need to know what is happening with it.
Solutions I've tried but failed:
1- Wipe all data but failed as it looked like nothing happened.
2- Wipe everything everywhere but still remain still
3- Flashing stock rom via Odin but failed.
4- Flashing another version of recovery via Odin but failed
P/S: I've noticed that E:Unknown volume for path [EXT-SD] when I'm doing full wipe.
No one can help me?
Good day, I dont know what happened to my phone. I'm just charging and this message popped out.
"Encryption was interrupted and can't be completed. As a result, the data on your phone is no longer accesible.
To resume using your phone you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up on your Google account." and a reset phone button.
I already did reset the phone, but the said message is still there,
i tried many things like flashing twrp through fastboot and then format data but it says cant mount storage,
flashed stock rom thru miFlash but same message appears, flashed custom rom but all apps are crashing and rebooting, flashed china rom still the message is there.
any suggestions? need help badly.
thankyou.
Sound alike the devices corrupted its self. Known to happen with Xiaomi devices. The hardware just ends up failing after a short amount of time.
Time to send it back for repair.
Ok Masters, so I am having the same issue that this guy here:
https://forum.xda-developers.com/ga...mand-error-samsung-galaxy-j7-prime-s-t3929850
I can install any rom. However, the pin to register either face or fingerprint, does not work. So I cannot even get to the fingerprint screen because it returns me to enter pin, and when I re-enter it, it says is wrong. I guess it has something to do, the fingerprint so far, had just worked on Cerberus AOSP rom, but neither on one UI nor 8.1 based roms work. on 8.1 I get setting had stopped.
So, flash stock over odin was already tried and it gets stuck there. Already flashed no verity, no luck, flashed, bbos, godness, venom, no luck.
Any other advice? Seems that somehow I messed up with the encryption and that is making not registering the pin or pattern.
I managed to pass the screen with Magisk, but as soon as system boots and I try to set fingerprint, it says settings stopped. I am really frustrated now.
Thanks,
This was already solved. If anyone is interested in getting more details he they are:
The no command was because someway somehow, the system partition was "busy " or non-writteable, at least that was the message that I was able to read. I don't know how it got to that state, but my solution was the following:
- Select system partition in twrp and tapped on repair file system. I got an error immediately that twrp could not read system block. I changed file system to ext2 and rebooted twrp.
- once again I clicked on repair file system. No errors this time. Rebooted twrp. Changed file system to ext4. Rebooted twrp. Repaired file system again and rebooted twrp once again. Downloaded an aosp 8.1 rom and setted screen lock after the set up, it worked. Then, installed apollo v1. Screen got frozen for a second when setting pin, but it let me pass to set my fingerprints.
Then I knew that it was already working. Installed a One Ui rom to try and it worked again my screen lock with finger print.
Hopefully this helps someone as I found no solution whatsoever in any part of forums or internet, this was pure trial an error over 4 days.
Hi guys, please I need your help. I got a samsung A7 (2018) device which doesn't connect to network though SIMs worked even showing my contacts.
I made research and found out I have root the device since the IMEI has been tampered. I rooted with Magisk, i.e patched my AP with magisk right on my phone then flashed with odin. After rooting I downloaded Super Tool as per instructions cause I read alot of articles and watched alot of videos.
Now that's when I messed up, all I know is, I clicked "Restore original IMEI" while my device was in download mode. And upon reboot I was greeted with an error message telling me something like "update failed, connect to Smart Switch, then click on Emergency Software Recovery".
Tried that, didn't work. I reflashed using Odin several times, with even using PIT and NAND Erase but still nothing. It's just stucked at boot logo and whenever I reboot to stock recovery, this "E:failed to mount /.system" message along with other writings like "#no data on recovery_cause#" show up.
I tried many methods found here on XDA and other sites but still nothing worked. I even installed the PBRP Recovery I saw here on XDA, though that worked but it still didn't fix my problem. And it failed to install zip. 'Cause I tried installing my firmware, said "zip verification failed" and other zip files I don't even understand the message it gave.
I tried wiping cache and formatting, change file system and repair file system, still nothing.
Whenever I try the "Run graphics test" in stock recovery it shows "Installing system update" along with gage, then "Error", then "No command" then "Erasing" along with gage and then back to Recovery.
and whenever i try "wipe cache partition" option
Wipe cache partition->
--Wiping cache...
E:[PDP] lstat /c____/pdp_b__:0 - No PDP Scenario
Formatting cache...
cache wipe complete.
cache wipe complete.
I cut the story short for convenience, but I know you quite understand all procedures I took.
Please help me with anything you have, I would appreciate it.
I tried everything myself cause I want to know how everything works and because I want to study Computer Science. I'm faily familiar with codes.
I'm really sorry if you find my English hard to read or digest, I didn't mean to make it hard for you to understand me.
Thank y'all.