I have the gear s3 connected to my oneplus 3t by BT only.
Whenever i go into my car (have a BT speaker), both watch and car speaker appear as connected.
However, "phone audio" is always picked by the watch and not by the car speaker.
The best way i found to switch BT audio back to the car is doing it manually from the BT menu which is not a realistic solution.
Is there anyway to "prioritize" BT phone audio in a way that when i get into my car the speaker will automatically be chosen?
It has been discussed before in this link https://forum.xda-developers.com/showthread.php?t=3650826
Related
I am looking for a quick and easy way to integrate my trinity with my car.
Currently I have have a generic car mount with charger. However, I find that TomTom and telephone calls over the speakers are too quiet.
I was thinking of installing a Parrot MK6000 in my car as a method to stream audio from my trinity to the car stereo whilst also acting as a car kit for hands free use while driving. Has anybody had any experience with wiring up this kit? is it easy for a moderate level electronics users (able to solder wires proficiently etc.) to wire up?
Alternatively does anybody know of other solutions to integrate the trinity with the car stereo?
Hello:
I installed this hands free in my car, and it works really fine as a hands free. The audio streaming works well too, but the sound is quite methalic. With tomtom, there is a delay in the sound, the first word it says, for example "...Turn on the left in...." you listen "...urn on the left in ..." and it hanpens allways when tomtom starts to talk.
My OS version is wm5 and I read that wm6 solves this problem.
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
stormyb said:
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
Click to expand...
Click to collapse
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
esackbauer said:
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
Click to expand...
Click to collapse
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
stormyb said:
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
Click to expand...
Click to collapse
Actually I bought the Sony because it supports A2DP. And with MortPlayer it works flawless when listening music. With activated Bluetooth Stereo (Headphone Symbol in top bar) Tomtom still uses the internal speaker.
Hello, my new car has a bluetooth support, that if I keep my fuze with bt turned on, when the fuze rings it ring on the car's sound, if I answer it works by car's sound and the BT integrated mic, and when I call also, it works the same way.
I'd like to transmit my fuze's sound I hear on WMP, or TCMP right to the car's sound, so I think I would have to configure car's sound as a handsfree.
Would anybody know if the bluetooth's sound would have a good quality? And if there is a away for transmit it?
Thanks
if the car's bt support a2dp you can choose it as wireless stereo under bluetooth settings
if it don't support that you cant
I can't see any configuration about it. what is this a2dp?
My car's bt is only a button, that u press two times to call, and one time to answer, it configures automatically, and I can not see anything about it.
http://en.wikipedia.org/wiki/Bluetooth_profile#Advanced_Audio_Distribution_Profile_.28A2DP.29
Rudegar is right - if your car supports a2dp you can connect the device to your cars stereo. However some car maufacturers offer upgrades for BT-audio for their car stereos (Audi for example) if it´s not buil in originally.
I have a Sony car stereo (BT5100) and tried it with my touch pro. The sound quality however is fairly poor. I have tried different audio players with no improvement.
hippokrates, any idea if the built in bluetooth in a BMW M6 supports a2dp?
I found a PDF-File on the BMW Homepage. Apparently they don´t support a2dp (even though they don´t specificcally mention it) but offer so called snap-in adapters for a bunch of cellphones. Unfotunately the TP is not one of them. However, they tested the BT-functions (hands free protocoll and SIM-card access) and they are officially working with the touch pro. But I suppose you found that out allready ;-)
H, thanks for that. I couldn't find it on the BMW site. The bluetooth does work well with my TP in the M6. I only use it for the phone, which works very well. I'll have to experiment with the music and see if I can get that working. I'll report back.
Hi, I'm new here and this first post is a really weird question.
Here's the story.
I am connecting my NS to my car audio deck using the 3.5" jack to the AUX in the car. The NS will detect that a headset is connected. I am able to listen to music or internet radio from my NS in the car.
Now I pair my BT handsfree earpiece to the NS for phone calls when driving. Pairing is fine.
Here's the situation.
When a call comes in I can answer the call by pressing the button on the BT earpiece, BUT once on the call it actually uses the headset for output and mic. There is no mic, so I can only hear the caller from the car speakers, but not be able to talk to them.
I will need to actually select output to bluetooth on the NS in order for it to switch over to the actual BT earpiece and have it work properly.
So the question, is there a setting that will always have the preference for bluetooth first?
If I only have the BT handsfree connected, it will connect to the BT unit without issues.
My car audio deck does not have BT and I wouldn't want to fiddle with the phone while I'm driving (it's against the law in some places and it's dangerous).
Hello!
I would like to use the SmartWatch 3 in the car, hands-free calling. In addition I have the SmartWatch connected to the mobile phone and the mobile phone connected to the AUX port of my car-radio. Now I can hear the caller over the car-speaker, but he me not. The integrated microphone in the watch not work.
Can help my?
No one has an idea?
Times an example without a watch: If you connect the phone to the AUX output and someone calls, then you hear the voice over the car speaker, but he does not hear me. The microphone is then switched always silent. Why is that? Is that a problem with the cable?
The watch microphone has one and only function: translate your voice into commands for Google Now.
If you attach your phone to the aux port of your car stereo, depending on the phone itself, the phone mic will shut off or work as always.
In Xperia phones, the headphone jack doesn't exclude the microphone as long as it's not connected to a headset.
If I connect my Xperia Z Ultra to the Aux port of my car stereo, I can hear the caller and he can hear me if I keep the phone mic at a reasonable distance.
To keep things way better and simpler, I had a SBH20 bluetooth headset laying around, connected to the car stereo, and placed in the middle of the car.
That way I can stream music and call hands free without worrying about the position of the phone itself, cause the headset has its own mic, obviously. [emoji6]
Sent from my C6833 using Tapatalk
Is there a easy way without opening up Bluetooth connections to disconnect my Bluetooth headset ?
The problem is I maybe playing a game and listening to audio from the game and for some reason the headset kicks in. "The On/Off switch of my Bluetooth handset is not great"
I lose my Audio my phone, then I got to open the Bluetooth connections and disconnect the headset.
Sometimes I want the device to ignore Bluetooth accessories and just use the internal speaker; my old OnePlus this was easy but not so much with the Pixel 4a.
Got to be so annoying I am thinking about buying a new headset.