Sirs
My j7 nxt just turns off after blinking for a second I cant flash it. And also when I go to recovery I see
Unknown volume for path [/odm]
Unknown volume for path [/vendor]
Can't mount system
Please help I am stucked badly
gkyummer said:
Sirs
My j7 nxt just turns off after blinking for a second I cant flash it. And also when I go to recovery I see
Unknown volume for path [/odm]
Unknown volume for path [/vendor]
Can't mount system
Please help I am stucked badly
Click to expand...
Click to collapse
Download stock firmware from Sammobile website and flash using odin .. it will solve
Aikyo Gohain said:
Download stock firmware from Sammobile website and flash using odin .. it will solve
Click to expand...
Click to collapse
After flash stock rom... also same thing happened
gkyummer said:
Sirs
My j7 nxt just turns off after blinking for a second I cant flash it. And also when I go to recovery I see
Unknown volume for path [/odm]
Unknown volume for path [/vendor]
Can't mount system
Please help I am stucked badly
Click to expand...
Click to collapse
This prob is easly solved open your odin and select the .tar file for j7 nxt and go the pit section in your left hand side on odin and unselect the autoreboot device then flash your file and remove the bettery and u done...
Related
when i'm install cwm-root-gtab2a.zip it showing message E: signaturing verification failed, please can someone help me solve this problem??
Ardyanto said:
when i'm install cwm-root-gtab2a.zip it showing message E: signaturing verification failed, please can someone help me solve this problem??
Click to expand...
Click to collapse
in the flashing zip menu (Recovery Mode)
you will see "Toogle signature veryfication"
after that you can flash the cwm-root-gtab2a.zip
PRESS THANKS IF I HELP
i have search other forum, looks like i'm still using e3 recovery mode, but i already install CWM using odin, why it's still haven't change to CWM ??thx before
Same issue on my GT-P5100
More info on issue
Butcurrently no solution.
Done by downgarding to stock version P5100XXALD6
For manual see This Thread
Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
LocDog39 said:
Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
Click to expand...
Click to collapse
you can't do anything about it :crying:, just take it to the shop from where you bought it and tell them it's not working and wish they replace your phone and don't tell them that you have flashed a rom.
Okay thanks
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
LocDog39 said:
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
Click to expand...
Click to collapse
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
http://androidlegend.com/update-samsung-galaxy-y-duos-s6102-with-gingerbread-2-3-6-ddld4/ follow this link
groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
Tried and works! THANKS MAN!
my galaxy y duos is dead, it was not rebooting and goes only to downloading mode. i try flash with the custom rom but still it doesnt booting .
plzz help me
rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
i tried these thing that you say ..but my samsung galaxy y duos is still stuck at logo ...in recovery mode
" --appling Muti-csc --
E : failed to mount /system (invalid argument)
E : failed to mount /system (invalid argument ) " is written ..what can i do ..please tell me ..
my phone is stuck (boot LOGO) , after flasing !
hey ,,
can anyone sort this out for me ..please !
tried flashing new rom Boyzz v2.0(http://forum.xda-developers.com/showthread.php?t=2507406) via CMW recovery.., tried flasinh the same rom twice , will it work if flash my stock rom ???
tried clearing everything on my SD card , formatted n tried flashing it again .
n when i charge after switching off ..a circle comes inside that battery logo instead of that green stuff .
i can boot into recovery mode after i remove the battery and reinsert it again .
w
i Rooted my samsung s duos 2 with Kingoroot and then flashed with Rashr flashing app. Then i rebooted it in recovery mode but now it has got stuck on samsung logo screen and unable to go in recovery mode or download mode please help . :crying::crying::crying::crying::crying::crying::crying:
I am unable to enter recovery mode and not able to start up my device also . The screen got stuck on Samsung logo . please any one help
Same problem!! Don't know when I'll get the solution...
defyreborn said:
i Rooted my samsung s duos 2 with Kingoroot and then flashed with Rashr flashing app. Then i rebooted it in recovery mode but now it has got stuck on samsung logo screen and unable to go in recovery mode or download mode please help . :crying::crying::crying::crying::crying::crying::crying:
I am unable to enter recovery mode and not able to start up my device also . The screen got stuck on Samsung logo . please any one help
Click to expand...
Click to collapse
Same problem brother.. If you get any solution then please do post or text me +919668450825 WA
Download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy
Vishal Shrivastav said:
Download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy
Click to expand...
Click to collapse
will this erase all the data on the phone?
aquabigo said:
will this erase all the data on the phone?
Click to expand...
Click to collapse
No
Yesterday My galaxy grand duos suddenly got turned off and
Then it got struck in a bootloop for no reason !!!
When I boot into twrp then it doesn't mounts system/ preload and data partition ... And shows invalid argument....
I had aicp 6.0 installed(custom ROM)
Help please I can't loose my device ...
pratyaksh tyagi said:
Yesterday My galaxy grand duos suddenly got turned off and
Then it got struck in a bootloop for no reason !!!
When I boot into twrp then it doesn't mounts system/ preload and data partition ... And shows invalid argument....
I had aicp 6.0 installed(custom ROM)
Help please I can't loose my device ...
Click to expand...
Click to collapse
Best thing to do is flash stock rom via odin and start again - this will wipe the phone and restore stock firmware
You will need
odin
your phones firmware
usb cable
samsung usb drivers
a windows pc
Best search your device specific xda forum for firmware and how to's or you can get firmware via the sammobile website
Can't I flash a zip file...
How to flash firmware ... Through Odin can you elaborate
Which file is needed for that... I know how to flash recovery but not firmware
pratyaksh tyagi said:
Can't I flash a zip file...
How to flash firmware ... Through Odin can you elaborate
Which file is needed for that... I know how to flash recovery but not firmware
Click to expand...
Click to collapse
like I said - look at your phone device specific forum for how to's
https://forum.xda-developers.com/showthread.php?t=2751369
https://forum.xda-developers.com/showpost.php?p=61733408&postcount=3
you can google how to use odin but the instructions are on the first link given with odin itself in the post attachment
Hey buddy I am not able to flash through Odin can you please help..
every time I get struck on initialising or setup connection..: messgage
pratyaksh tyagi said:
Hey buddy I am not able to flash through Odin can you please help..
every time I get struck on initialising or setup connection..: messgage
Click to expand...
Click to collapse
Either
1 - you have not put your phone into download mode and pressed vol up to start connection
2 - you have not installed the samsung usb drivers
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
if everything in odin is working you will see com:number in a coloured box under com:id on the left hand side of odin when your device is connected
The com:5 is visible ...
Kies is also not detecting my phone
I'll try after installing drivers
Not able to flash !!!
hey i tryed to install combination file wizh odin and i got a error after than i power of my phone and now when i push volume up down and power on i get samsung logo and after that 1s android logo and a yello error.
hamidd212 said:
hey i tryed to install combination file wizh odin and i got a error after than i power of my phone and now when i push volume up down and power on i get samsung logo and after that 1s android logo and a yello error.
Click to expand...
Click to collapse
Can anybody helps me