Related
http://theglass-m.com/
Ordered from here and received yesterday. Shipping was very fast and has a cut out for proximity sensor and back camera. Apparently its gorilla glass and fits great. Has a nice anti finger print coating. I have been searching for a glass back protector and finally found one. I can post pics if people want but the price is great and fit is also good.
Is it just me or that website look dodgy to say the least...
http://cdn.shopify.com/s/files/1/0252/5983/products/07_1_1024x1024.jpg?568 <--- is there the "Sony" logo?
How much it's thickness?
if you put the glass on both side, is it can fit the docking ?
wawyed said:
Is it just me or that website look dodgy to say the least...
Click to expand...
Click to collapse
Yep thought the same thing, but since it had paypal I said I'm covered so what the hell. To my surprise it was delivered in three days lol.
As for the docking station I have not has any issues with mine but it is the ten dollar one off ebay. It doesnt say the thickness but my uess would be 4mm
EmeraldTimer said:
http://cdn.shopify.com/s/files/1/0252/5983/products/07_1_1024x1024.jpg?568 <--- is there the "Sony" logo?
Click to expand...
Click to collapse
No SONY logo on glass. I took my ASF off
bodson66 said:
Yep thought the same thing, but since it had paypal I said I'm covered so what the hell. To my surprise it was delivered in three days lol.
As for the docking station I have not has any issues with mine but it is the ten dollar one off ebay. It doesnt say the thickness but my uess would be 4mm
Click to expand...
Click to collapse
Hi, how about the touch responsiveness? is it any issue?
touch125 said:
Hi, how about the touch responsiveness? is it any issue?
Click to expand...
Click to collapse
No issues at all very smooth and responisve
bodson66 said:
No SONY logo on glass. I took my ASF off
Click to expand...
Click to collapse
Ohw, Bad :c
Do you have to remove the ASF can't it be used over it ?
venky716 said:
Do you have to remove the ASF can't it be used over it ?
Click to expand...
Click to collapse
You could put it over the asf, I did it with another brand glass protector. Just makes sure it clean and dust free. These one came with a big sticker to remove any dust.
Can you please put a Picture of the Phone in a way we can see how much the glass is in thickness compared to the Phone looking Just at the sides?
How abt scratches and fingerprints ?
I found this http://www.evolutivelabs.com/
Seems a bit better, also funded from kickstarter so kinda trustable.
venky716 said:
How abt scratches and fingerprints ?
I found this http://www.evolutivelabs.com/
Seems a bit better, also funded from kickstarter so kinda trustable.
Click to expand...
Click to collapse
I have had rhino shield on my nexus 4 and nexus 7 also for my xperia z. The first generation where not very good. They scratched easily and also got dented easily. On my nexus they didn't cover much of the screen and on my xperia the one they sent had issue with the back protector. I have ordered the second generation since they were giving the people who backed them on kick starter free second gen ones. I have not received them yet so cannot comment on them as of now.
These have been very good so far they are apparently made of gorilla glass so they are scratch resistant and have anti finger print coating. The best I have used so far. These are 9H and rihino shields are I beleive 5H.
knightpt said:
Can you please put a Picture of the Phone in a way we can see how much the glass is in thickness compared to the Phone looking Just at the sides?
Click to expand...
Click to collapse
Here ya go hope that helps.
bodson66 said:
Here ya go hope that helps.
Click to expand...
Click to collapse
Thank you, they seem quite thin from the pictures. While we can notice it's there, it's actualy quite OK in therms of thickness.
It's a case that the pros outweight the cons by a large margin.
Ordered now.
Let see how it perform compared to my old SGP one.
Hexs said:
Ordered now.
Let see how it perform compared to my old SGP one.
Click to expand...
Click to collapse
Did you order back and front?
bodson66 said:
Did you order back and front?
Click to expand...
Click to collapse
Yes, both side.
I also have a charging dock so let see if it still fit or not with both side of glass protector.
Hexs said:
Yes, both side.
I also have a charging dock so let see if it still fit or not with both side of glass protector.
Click to expand...
Click to collapse
Do you have the sony dock or the knock one. I had to take out the spring loaded tabs to get mine to work properly it would charge but a slight knock on my night stand would sometimes stop it from charging.
I am seeing a lot of screen protectors coming out on amazon, that are from small companies, was wondering if anybody has ever tried them and which one is the best one? Should I go try some of them out or wait for Zagg to come out of one of their own for the Moto Z/Z force?
Never felt like paying the premium for Zagg stuff; I've been using Skinomi protectors on my last three phones (it's the same material as Zagg/GadgetGuard etc). Have the TechSkin on my Z Force and it fits PERFECTLY, right up to the edge. Tried the MatteSkin once, but found it de-contrasted my screen way too much.
AngDR01D said:
I am seeing a lot of screen protectors coming out on amazon, that are from small companies, was wondering if anybody has ever tried them and which one is the best one? Should I go try some of them out or wait for Zagg to come out of one of their own for the Moto Z/Z force?
Click to expand...
Click to collapse
I have just ordered 4 or 5 of them from the small companies that I have never heard of. I'm planning to review them. They start arriving this weekend and my moto z arrives on Tuesday. Can't wait to get started as I tried the phone in BestBuy answer was really impressed.
emcdow said:
I have just ordered 4 or 5 of them from the small companies that I have never heard of. I'm planning to review them. They start arriving this weekend and my moto z arrives on Tuesday. Can't wait to get started as I tried the phone in BestBuy answer was really impressed.
Click to expand...
Click to collapse
Thanks! Leave a link here for the reviews to show other people which one to get as well!
emcdow said:
I have just ordered 4 or 5 of them from the small companies that I have never heard of. I'm planning to review them. They start arriving this weekend and my moto z arrives on Tuesday. Can't wait to get started as I tried the phone in BestBuy answer was really impressed.
Click to expand...
Click to collapse
Highly interested in what some thoughts are. Please post opinions.
Sent from my XT1254 using XDA Free mobile app
Well crap. I thought it was the Force that had the 2.5D screen edges. We aren't ever going to get a decent glass screen protector for this phone. My S7 was just like this and as popular as it is doesn't have a good glass screen protector.
Anybody tried Nillkin H+ Pro? They offer discount today.
http://nillkin.org/smartphones-acce...o-z-accessories/nillkin-motorola-moto-z-h-pro
olegfusion said:
Anybody tried Nillkin H+ Pro? They offer discount today.
http://nillkin.org/smartphones-acce...o-z-accessories/nillkin-motorola-moto-z-h-pro
Click to expand...
Click to collapse
I've ordered one... it seems a good product to me. Still waiting for it... :fingers-crossed:
enetec said:
I've ordered one... it seems a good product to me. Still waiting for it... :fingers-crossed:
Click to expand...
Click to collapse
Nice, I think I will order it too.:good:
olegfusion said:
Nice, I think I will order it too.:good:
Click to expand...
Click to collapse
Received today. Great package! It includes a protection for Moto Z back too. For free.
enetec said:
Received today. Great package! It includes a protection for Moto Z back too. For free.
Click to expand...
Click to collapse
how is the fit?
I wish I would have come across this thread before I bought the IQ Shield Tempered Glass protector. Clarity and feel are amazing but the edges don't seal!! It really grinds my gears.
Just bought a generic tempered glass (I highly doubt it is real tempered glass, maybe just some plastic). It is really cheap, not prone to fingerprints, and it makes the screen look great. Adhesion is nice, no abnormal lifts from the sides. Here are some pictures and the price tag.
I'm jealous, that seal looks perfect! I paid twice as much and mine is lifted on the left, right, and bottom edges.
treyy said:
how is the fit?
Click to expand...
Click to collapse
Installed today... The front screen protector is of good quality and attach perfectly on screen even if it is a bit small in size in all directions in my opinion. Great transparency and print resistance too...
The back one is like old screen protections and it's impossible to fit it without a lot of bubble...
Too much for me so I removed... It's a pity since it had a good print resistance too... that was really needed.
Anyone found a screen protector that covers the entire front?
enetec said:
Installed today... The front screen protector is of good quality and attach perfectly on screen even if it is a bit small in size in all directions in my opinion. Great transparency and print resistance too...
The back one is like old screen protections and it's impossible to fit it without a lot of bubble...
Too much for me so I removed... It's a pity since it had a good print resistance too... that was really needed.
Click to expand...
Click to collapse
Did you try a mod on the back with the screen protection on? Did it still work?
---------- Post added at 10:42 AM ---------- Previous post was at 10:29 AM ----------
nole4ever said:
Anyone found a screen protector that covers the entire front?
Click to expand...
Click to collapse
I bought this one and they claim full coverage.
https://www.amazon.com/gp/product/B01GUKLPRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it and will install in on Monday. I can let you know.
corerwh said:
Did you try a mod on the back with the screen protection on? Did it still work?
---------- Post added at 10:42 AM ---------- Previous post was at 10:29 AM ----------
I bought this one and they claim full coverage.
https://www.amazon.com/gp/product/B01GUKLPRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it and will install in on Monday. I can let you know.
Click to expand...
Click to collapse
Thanks!
corerwh said:
Did you try a mod on the back with the screen protection on? Did it still work?
Click to expand...
Click to collapse
Yes, with no problem at all... but I removed it because of bubbles....
corerwh said:
I bought this one and they claim full coverage.
https://www.amazon.com/gp/product/B01GUKLPRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it and will install in on Monday. I can let you know.
Click to expand...
Click to collapse
Looking at the pic it seems so. :fingers-crossed:
nole4ever said:
Thanks!
Click to expand...
Click to collapse
So the link I posted last week, I realized that was for the Moto Z Force and I just have the Moto Z/Moto Z Droid. So I purchased this one and will be returning the other one.
https://www.amazon.com/gp/product/B01GUKL5W0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Here are some photos to show how much it covers the phone: https://goo.gl/photos/fokxXnJzSq58zKAU6
I didn't get it on exactly perfect but if I did then I think it would have been pretty close to full coverage. I'm considering pull it off and replacing it. Also, I bought a full body protector so that I could put something on the back to protect from scratches and some finger prints. When I pulled it out and looked at it before applying it to the phone then I noticed there was no hole for the gold connection pins to pass through. I was very disappointed. Here is a link to the full body protector.
https://www.amazon.com/gp/product/B01GUKL5Y8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I just got my S10+ and installed this and the fingerprint sensor barely works with the screen protector. I would not recommend buying this at all. I'm about to take mine off and ask for a refund.
steelersmb said:
I just got my S10+ and installed this and the fingerprint sensor barely works with the screen protector. I would not recommend buying this at all. I'm about to take mine off and ask for a refund.
Click to expand...
Click to collapse
did you redo the finger prints after the install?
cflip2x said:
did you redo the finger prints after the install?
Click to expand...
Click to collapse
Was going to ask the same thing. You need to re-register your fingerprints after installing the screen protector
steelersmb said:
I just got my S10+ and installed this and the fingerprint sensor barely works with the screen protector. I would not recommend buying this at all. I'm about to take mine off and ask for a refund.
Click to expand...
Click to collapse
I just installed mine yesterday I actually had it able to read my prints after installing it. I did add 4 prints index, left thumb and 2 right thumb when I got the phone on wed. I have had about 4 domes on my s8+ and installed it on friends phones so I was comfortable with the process.
Can someone check their s10+ with the UV light and tell me if their screen looks like this. This is without any protector on.? Just want to see if this is normal. It's like a rectangular box on the screen. This can only be seen under uv only.
hellboy2232 said:
Can someone check their s10+ with the UV light and tell me if their screen looks like this. This is without any protector on.? Just want to see if this is normal. It's like a rectangular box on the screen. This can only be seen under uv only.
Click to expand...
Click to collapse
It was the same for me. I wouldn't worry.
I've installed the Whitestone Dome Glass. I put it on even before I set up the phone.. At first I was annoyed, but my phone updated today & it's awesome now.
cflip2x said:
It was the same for me. I wouldn't worry.
Click to expand...
Click to collapse
Yeah I was freaked out and called Samsung and they want me to take it to the ubreakifix place. At first I thought it was the Whitestone so I took it off. Good thing I got the 2 pack.
hellboy2232 said:
Can someone check their s10+ with the UV light and tell me if their screen looks like this. This is without any protector on.? Just want to see if this is normal. It's like a rectangular box on the screen. This can only be seen under uv only.
Click to expand...
Click to collapse
That is 5he fingerprint scanner
Sent from my SM-G973U1 using Tapatalk
hellboy2232 said:
Can someone check their s10+ with the UV light and tell me if their screen looks like this. This is without any protector on.? Just want to see if this is normal. It's like a rectangular box on the screen. This can only be seen under uv only.
Click to expand...
Click to collapse
Hellboy, there is a demon living in your phone.
Whitestone dome doesn't work for me either.
The whitestone dome glass doesn't work well for me either, my finger print hits are less than 50%, sometimes as long as 10%. It is really frustrating. I've done everything to make this work, including re-registering prints, enabling touch sensitivity and obtaining all the software updates. The company is also incredibly hard to get a hold of.
I found this on yt and it did work for me
I did the registration of my thumbs 2x per thumb BEFORE THE INSTALLATION and it works PERFECTLY, I did NOT register my fingerprint after the installation.
Hope this helps someone!!!
Phsyclone79 said:
I found this on yt and it did work for me
I did the registration of my thumbs 2x per thumb BEFORE THE INSTALLATION and it works PERFECTLY, I did NOT register my fingerprint after the installation.
Hope this helps someone!!!
Click to expand...
Click to collapse
Yes, I want to try that but I would need a new tempered glass, removing the old one to reapply after a week doesn't seem like a good idea (dust sticking to the bottom of the tempered glass that will now be full of LOCA glue). If whitestone sends a new kit/glass then I'm willing to give them a try again.
Just to caveat that press down on the finger print sensor is new instructions that was not in the original instructions when I bought the kit.
johnny_debt said:
Yes, I want to try that but I would need a new tempered glass, removing the old one to reapply after a week doesn't seem like a good idea (dust sticking to the bottom of the tempered glass that will now be full of LOCA glue). If whitestone sends a new kit/glass then I'm willing to give them a try again.
Just to caveat that press down on the finger print sensor is new instructions that was not in the original instructions when I bought the kit.
Click to expand...
Click to collapse
You're correct. Those instructions were not in the box.
I bought the 2 pack from Amazon and they will replace mines so I'm good. But the 1 that I have on now is good to go!
Also, the have a guaranteed on their screens, I think is something along the $10 for a new screen with proof of purchased
hellboy2232 said:
Can someone check their s10+ with the UV light and tell me if their screen looks like this. This is without any protector on.? Just want to see if this is normal. It's like a rectangular box on the screen. This can only be seen under uv only.
Click to expand...
Click to collapse
My s9+ looked like that as well.
hellboy2232 said:
Can someone check their s10+ with the UV light and tell me if their screen looks like this. This is without any protector on.? Just want to see if this is normal. It's like a rectangular box on the screen. This can only be seen under uv only.
Click to expand...
Click to collapse
Yes, you can watch JerryRigsEverything on yt and he shows the internals.
That's normal.
Phsyclone79 said:
You're correct. Those instructions were not in the box.
I bought the 2 pack from Amazon and they will replace mines so I'm good. But the 1 that I have on now is good to go!
Also, the have a guaranteed on their screens, I think is something along the $10 for a new screen with proof of purchased
Click to expand...
Click to collapse
How did you get them to replace yours? They have been ignoring my communication.
Be careful on their guarantees, i have not heard good things about that.
johnny_debt said:
How did you get them to replace yours? They have been ignoring my communication.
Be careful on their guarantees, i have not heard good things about that.
Click to expand...
Click to collapse
I've had my previous glass replaced by them on my Note 9 due to an error on my part.. They were pretty quick about their response. I did have to pay shipping. However, I've emailed twice about the S10+ and the FPS and I haven't heard anything back yet either.
For 50, its a ripoff. Just get a good case and a wet install and be careful.
Sent from my iPhone using Tapatalk
Still haven't heard back from Whitestone. Not sure what is going on.
Has anyone tried the method of pressing down the fingerprint area after the 15 sec UV flash? Has it made a difference? I don't want to remove the existing one if it's not going to get any better.
What are your thoughts on this glass?
InvisShield True Fit for Samsung Galaxy S10 and S10 Plus
Mod Edit
Seems the same as Whitestone with a few exceptions. I do like that the camera cutout isn't there but I feel like Whitestone is easier to install with the kits they provide.
Might be a good idea to install that way! Thanks for the share. I ordered something similar from AliExpress, gonna take forever to get here and has some bad and good news for the fingerprint sensor
Im not going to blow money on these gimmicks. Tempered glass has soo many advantages too but the reality is- there is no great solution for the curved screen except a wet install and good case+ extreme care like not walking and using phone, not holding phone while getting out of car in gravel driveway, etc.
Sent from my iPhone using Tapatalk
Outbreak444 said:
Seems the same as Whitestone with a few exceptions. I do like that the camera cutout isn't there but I feel like Whitestone is easier to install with the kits they provide.
Click to expand...
Click to collapse
i think the front facing camera is optimised as is, adding extra glass will affect that.
Can you give us some pics and review please
FINALLY GOT MY GLASS TODAY AND IT WORKS!!
I tried first with standard way and fingerprint didn't work. Second try followed that video the mods took down and it worked perfectly!! I didn't even re-register my fingers. It's a little less accurate but I'd rather not have a cracked screen when i get careless over the next 3 years I own this phone.
Death Inducer said:
FINALLY GOT MY GLASS TODAY AND IT WORKS!!
I tried first with standard way and fingerprint didn't work. Second try followed that video the mods took down and it worked perfectly!! I didn't even re-register my fingers. It's a little less accurate but I'd rather not have a cracked screen when i get careless over the next 3 years I own this phone.
Click to expand...
Click to collapse
Could you share the link to buy it?
Sent from my SM-G975W using Tapatalk
rodcool said:
Could you share the link to buy it?
Click to expand...
Click to collapse
Here you go
Anyone tried a Whitestone glass protector?
Thank you. I bought 2 glasses, 3 glue bottles and screen protector for the back cams. I hope they work
Sent from my SM-G975W using Tapatalk
highaltitude said:
Anyone tried a Whitestone glass protector?
Click to expand...
Click to collapse
I'm using it. My only issue with the glass in this thread is the absence of the camera cutout. I know before I had stated it seemed nice but my Whitestone has lifted up around the top while still actually being adhered to the phone. If I didn't have the cutouts then my front camera would be blurry. I assume this company would use similar glue and would end up with the same results later on.
get an insurance for it, and save money on your case!!!!
Samsung Premium Care Rocks
I have whitedome
It's a masterpiece
Did you take off the stock one that came from Samsung?
ravijob said:
What are your thoughts on this glass?
InvisShield True Fit for Samsung Galaxy S10 and S10 Plus
Mod Edit
Click to expand...
Click to collapse
I recomend I have one in my s10 plus and I love and the fingerprint work with no problem
Did you notice that the Note 20 Ultra has a built in screen protector out of the box?
I won't have mine in hand for a bit over 24 hours from time of this post...
However, I did notice Zach (JerryRigEverything) posed a durability "test" as usual and it appears to have the same type of protection as earlier models starting with the S10 series last year.
how many threads do this forum need about this? take a little time to search and not be so selfish and lazy.
marctronixx said:
how many threads do this forum need about this? take a little time to search and not be so selfish and lazy.
Click to expand...
Click to collapse
First day on XDA?
---------- Post added at 09:33 AM ---------- Previous post was at 09:27 AM ----------
dilgit said:
Did you notice that the Note 20 Ultra has a built in screen protector out of the box?
Click to expand...
Click to collapse
None of the demo models I saw had one, and the review units on YouTube didn't appear to have one either.
But a member here received his early in the United Arab Emirates, and he said it had a factory installed screen protector just like the S20 and the Note 10. On Jerry Rig Everything, Zach showed that it came with a factory installed screen protector as well.
I ordered some screen protectors just in case. You will need them. Gorilla Glass Victus scratches just as easy as previous versions.
Mr. Orange 645 said:
I ordered some screen protectors just in case. You will need them. Gorilla Glass Victus scratches just as easy as previous versions.
Click to expand...
Click to collapse
Which ones did you order?
It does, but it's extremely thin & I doubt it will be very effective long-term.
Well I got mine today and I cannot see or feel on edge of device if there is one installed. There is no cutout around front facing camera. I have been searching since mine arrived several hours ago and I am finding nothing that says for sure that one is installed.
Sent from my SM-N986U using Tapatalk
butchieboy said:
Well I got mine today and I cannot see or feel on edge of device if there is one installed. There is no cutout around front facing camera. I have been searching since mine arrived several hours ago and I am finding nothing that says for sure that one is installed.
Click to expand...
Click to collapse
that makes my decision easy, I left the factory one on my note 10 plus and the fingerprint scanner worked on the first try maybe 70% of the time.
finally took it off as it wore and boom worked on the first try almost always..huge difference.
so i hadn't decided when my 20 ultra came (caved and ordered the 512gb even though black sucks) if Id leave it or ditch it immediately.
I see yes and I see no. Friend of mine called Verizon they said no due to the new Gorilla Glass
Sent from my SM-N986U using Tapatalk
I got my phone today and yes it has one. Mine does not however because I took it off. It really does affect the finger print reader.
kangi26 said:
Which ones did you order?
Click to expand...
Click to collapse
Ringke Dual Easy
Yes there is screen protector out of the box for Singapore set. But sadly no case
Keive said:
It does, but it's extremely thin & I doubt it will be very effective long-term.
Click to expand...
Click to collapse
I find the pre-installed Screen Protectors decent for what they are. I had one on my Wife's S9, S10 and S20 and my Note 9 and Note 10. They seem to last about a year before they start to get bubbles. But short of that no complaints.
Looking the reviews over and it seems the rabid gerbils at Samsung seem to think this phone should sit screen down.
If you put it back down, there's it is pivoting on the cam hump like some misbalanced freak of nature.
Case and screen protector or it will get all beat to hell...
Doubtful I'll upgrade from the Note 10+ in spite of the 20's really cool specs and features.
I expect better, worse all the added off balanced bulk and NO 3.5mm jack. Samsung doesn't listen...
Got mine today and just has the protective film with holes cut out of it for camera and fingerprint sensor. I'm tempted to run it without one lol
Sent from my SM-N975U1 using Tapatalk
oneandroidnut said:
Got mine today and just has the protective film with holes cut out of it for camera and fingerprint sensor. I'm tempted to run it without one lol
Sent from my SM-N975U1 using Tapatalk
Click to expand...
Click to collapse
Cool.... it looks like great fun
The fact the factory screen protector has a cut out for the fingerprint sensor though is troublesome.
Sand is the biggest screen scratch culprit.
I'd use a wet apply urethane protect like IQ Shield once the factory one wears out which could be many months from now.
Definitely would get a good case that has slightly raised on the ends to protect the screen on flat surfaces.
I use the Bolt on my 10+ and it works very well. However the factory screen protect saved it from a nasty faceplant the 2nd day I had the phone.
Many who run phones like these naked end up replacing cracked screens as there's very little bevel to protect them from corner impacts... my 10+'s favorite landing spot are its case corners or to faceplant.
No reviews yet, the Bolt for the 10+ is excellent. Not sure about the one for the 20 ultra:
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672
This wet apply soft screen protector works very well although it requires some time to properly install. Edges stay down and if a edge lifts can be sealed back down with touch and a tad of moisture. Have 3 months on my 10 and it still looks great with no scratches.
Compatible with the Bolt.
https://www.iqshield.com/iq38298-samsung-galaxy-note-20-ultra-phone-screen-protector.html
Installed my Ringke Easy Dual screen protector today, since the US models don't come with one pre-installed.
Love this Ringke screen protector. It's invisible and has no effect on the fingerprint reader at all. Highly recommend it.
force70 said:
that makes my decision easy, I left the factory one on my note 10 plus and the fingerprint scanner worked on the first try maybe 70% of the time.
finally took it off as it wore and boom worked on the first try almost always..huge difference.
so i hadn't decided when my 20 ultra came (caved and ordered the 512gb even though black sucks) if Id leave it or ditch it immediately.
Click to expand...
Click to collapse
Got mine yesterday. And it indeed has a cut off at the camera, so it must be there.
Also my fingerprint scanner seems to be like your 70%. (Identical with my note 10, haha we are the same early adapters.)
So I will pull it off.
Huib
p.s. just pulled it off. It is very thin. I never had scratches on my Note 10, so no worries.
And my fingerprint works 100% now!
---------- Post added at 07:06 AM ---------- Previous post was at 06:55 AM ----------
Sword Fish said:
I got my phone today and yes it has one. Mine does not however because I took it off. It really does affect the finger print reader.
Click to expand...
Click to collapse
Fully agree. Did the same. There is a difference in fingerprints quality however. The older a person gets the worse they get. I tested it with my children.
So if you ar young and beautiful maybe you can leave the screen protector.
Huib
Isn't the one installed just a shipping protective film?
Phones used to be packed in a plastic or fabric type cover before putting in the box. These days they aren't and I think the film is just to protect the screen during transit. I believe that because it's just too flimsy to be a proper screen protector.
.
I had left the film over the screen on as it was unnoticeable but removed it after reading this thread.
The finger print sensor is MUCH better now! ?