Related
First thank beforehand all for your help, now I want to tell my problem I hope you can help
EMUI happens that was 4.1 b330 and I wanted to make a downgrade to EMUI 4.0 b180 perform the tutorial which teaches droidth return to EMUI 4.0 using a rollback update.app calling him perform all the steps to the letter, ie first perform flashing the update.app (rollback) then I wipes with recovery stock then when I went to flash the rom b330 he'll stay in a bootloop droidth says in his video that is normal to be made nuevaemnte wipes I brought the wipes but remained the same in the bootloop.
flash and try to b330, B100, B192's, do all the tuto again, try flashing by ADB manually with a tool called Knife and nothing as usual hope your help please! I'm desperate and do not know what else
my phone is a HUAWEI MATE 8 NXT-L09
Beforehand MIL THANKS AND PUBLIC APOLOGIES IF THIS IN THE WRONG SITE
my phone is a HUAWEI MATE 8 NXT-L09
Beforehand MIL THANKS AND PUBLIC APOLOGIES IF THIS IN THE WRONG SITE
Are you on a 4.0 firmware right now? If so..
Try to flash a Emui 4.0 L-09 Cust,system,boot,recovery files through the bootloader. You might need your bootloader code just in case it locked up, and Huawei Update Extractor to extract the files from a Update.app. After flashing make sure you factory reset if it gets stuck.
Do it manually using flash commands, I had the same issue. This is what worked for me.
After doing a factory reset with TWRP (including /data), I flashed the custom ROM, as it got stucked in a bootloop, I tried to install stock firmware. I tried so using the dload method on external SD and internal storage as well. But both get to 5% and fail. I restored my backup but without /data because TWRP did not allowed me to back it up. Now it's running but without many apps. I would like to go back to stock. Any ideas?
My version is MHA-L29C636B158
For the mate 9 there actually are 2 Offline Firmwares available. a Chinese for the MHA-L00 and the other one is the international version, C636. Offline says they don't need the verification which for you fails at 5 percent. They will go through for sure using the dload method. Just ask Google for " Mate 9 offline firmware C636"
another solution for your problem is to download the specas data for your specific firmware using Firmware Finder ( Google play ) and flash it via TWRP.
Once done your phone should run regular.
You will get an error within TWRP but you may ignore it, the flash process will success, even it it shows something else.
Last step Wipe cache and dalvik cache, then reboot
WieserZ1C said:
For the mate 9 there actually are 2 Offline Firmwares available. a Chinese for the MHA-L00 and the other one is the international version, C636. Offline says they don't need the verification which for you fails at 5 percent. They will go through for sure using the dload method. Just ask Google for " Mate 9 offline firmware C636"
another solution for your problem is to download the specas data for your specific firmware using Firmware Finder ( Google play ) and flash it via TWRP.
Once done your phone should run regular.
You will get an error within TWRP but you may ignore it, the flash process will success, even it it shows something else.
Last step Wipe cache and dalvik cache, then reboot
Click to expand...
Click to collapse
Thanks! I tried downloading public/update_data_full_public.zip from Firmware Finder, i flashed it with TWRP but everything looks the same. So now I´m downloading this ffirmware https://drive.google.com/file/d/0B9GG_Oe0gQDyUWlCS3lTRm5IOUE/view , that i found on this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656 thread, so i will try updating it with that. Should I flash hw_data for c636b136 (my actual version is c636b158),after flashing the previus step, as said on that thread?
for the international c636 you need the update_full_hw_spcseas.zip and the update_vendor.app
linorallo1 said:
Thanks! I tried downloading public/update_data_full_public.zip from Firmware Finder, i flashed it with TWRP but everything looks the same. So now I´m downloading this ffirmware https://drive.google.com/file/d/0B9GG_Oe0gQDyUWlCS3lTRm5IOUE/view , that i found on this https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656 thread, so i will try updating it with that. Should I flash hw_data for c636b136 (my actual version is c636b158),after flashing the previus step, as said on that thread?
Click to expand...
Click to collapse
Use this instead https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
It will let you update to the latest C636 build.
You'll have to unlock bootloader again after it's finished, and reflash twrp.
Though if you just want to use AurRom the one you downloaded will be enough.
And yes you will need too flash B136 hw and Public.
WieserZ1C said:
for the international c636 you need the update_full_hw_spcseas.zip and the update_vendor.app
Click to expand...
Click to collapse
Great, so i should download the update_full_hw_spcseas.zip for C636B158 from FF, and the update_vendor.app from the offlline C636 firmware. But i don´t quite understand the steps.
should i do like this?:
1- Flash offline C636, using dloader´s method .
2-Flashing TWRP
3-Flash update_full_hw_spcseas.zip from C636B158.
4-Done?
Sorry for so many questions but never had a Huawei before, and this is more complex than I expected.
Thanks all, the flashing via dloader´s method succeded, but now i have the b110 its not a problem.
you may update it through systemupdate if your system is untouched.
Any huawei apps now working?
WieserZ1C said:
you may update it through systemupdate if your system is untouched.
Any huawei apps now working?
Click to expand...
Click to collapse
I tried but, it doesn't detect any update. I think I will have to update manually, so far anything has worked
I accidentally wiped my Honor 8 with TWRP. Is it possible to get my Honor 8 back to the default OS?
Raxcu said:
I accidentally wiped my Honor 8 with TWRP. Is it possible to get my Honor 8 back to the default OS?
Click to expand...
Click to collapse
Is the bootloader unlocked? Do you know which model you had? Do you know which version of EMUI you had? Also for future reference do not make new threads without looking in guides because I think the answer is right here. https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445 . Next time you post try to be more helpful because everyone here will try to help you if you help them help you. Some people may not respond if you do not leave information, or communicate that you need help to provide the information.
If you know you had EMUI 5, this should work (assuming you use the correct firmware files and have unlocked bootloader still). What did you wipe in TWRP?
FeeningRootPriv said:
Is the bootloader unlocked? Do you know which model you had? Do you know which version of EMUI you had? Also for future reference do not make new threads without looking in guides because I think the answer is right here. https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445 . Next time you post try to be more helpful because everyone here will try to help you if you help them help you. Some people may not respond if you do not leave information, or communicate that you need help to provide the information.
If you know you had EMUI 5, this should work (assuming you use the correct firmware files and have unlocked bootloader still). What did you wipe in TWRP?
Click to expand...
Click to collapse
yes, the bootloader is unlocked, I had the FRD-L09 model, I had the EMUI 5.0. I wiped everything accidentally with advanced wipe.
Raxcu said:
yes, the bootloader is unlocked, I had the FRD-L09 model, I had the EMUI 5.0. I wiped everything accidentally with advanced wipe.
Click to expand...
Click to collapse
Next time be more careful. Here are some steps for you
1. Flash TWRP 3.1.1-1 (fastboot flash recovery twrp.img)
2. Download Firmware (If you are in Europe The L09 firmware up top should be what you use. If you are in Asia use the L09 firmware at the bottom.)
3. Move the firmware to your External SD if present and name the folder "Stock Firmware" using TWRP MTP
4. Factory Reset in TWRP (NOT ADVANCED WIPE)
5. Flash your region file before update.zip
6. Reboot to recovery in twrp, this will run EMUI stock recovery
7. Tap factory reset, wait.
You may need to Unlock the bootloader again, but your phone should be okay.
Raxcu said:
yes, the bootloader is unlocked, I had the FRD-L09 model, I had the EMUI 5.0. I wiped everything accidentally with advanced wipe.
Click to expand...
Click to collapse
Based on the method given above, were you able to restore the device? It would be new learning for me as i would go for dload but he suggested which was something new for me and i would definitely follow this instructions if i mess up or dload doesn't work.
Hi guys,
I am currently trying to figure out how to reinstall a clean version of the B385 for my FRD-L04. I have downloaded these two files from the Nougat Update for FRD-L04 Honor 8 (USA):
Full ROM – http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1585/g104/v83098/f1/full/update.zip
Data File – http://update.hicloud.com:8180/TDS/...FRD-L04_hw_usa/update_full_FRD-L04_hw_usa.zip
I have tried to flash them both from TWRP, but I always get the error: Updater process ended error 7
Can anyone please guide me through the process and let me know what I'm doing wrong?
I have look for a guide or post where this is detailed, but without luck. Can anyone link me to a guide on how to reinstall the stock firmware in my Honor 8 FRD-L04?
Thanks! :good:
The best way (if you don't want to unlock bootloader) is to flash a downgrade package first, then dload the Marshmallow update and finally your preferred Nougat update though Firmware Finder.
hackslash said:
The best way (if you don't want to unlock bootloader) is to flash a downgrade package first, then dload the Marshmallow update and finally your preferred Nougat update though Firmware Finder.
Click to expand...
Click to collapse
Thanks for the response. In my case, my phone is rooted, so I don't mind unlocking the bootloader. Would you please elaborate on how to do it that way?
Sent from my FRD-L04 using Tapatalk
juanboja said:
Thanks for the response. In my case, my phone is rooted, so I don't mind unlocking the bootloader. Would you please elaborate on how to do it that way?
Click to expand...
Click to collapse
Unlock your bootloader and follow this guide:https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306/
Choose the B385 firmware or any newer firmware available for your region.
So I decided to finally reinstall the stock firmware in my Honor 8 FRD-L04 in B389, and this is where the nightmare began.
- I made a full backup with TWRP just in case and I decided I wanted to start from the earliest firmware possible available.
- I started unrooting my phone using the UnSU zip by Osmosis.
- Then I flash via bootloader the recovery and boot image of the firmware B360.
- I flashed the rollback package from the Huawei official site with the B122 firmware also available at the same place. I saved the rollback package in my root directory in the dload folder, and loaded it with the 3-button method. After this I wasn't able to boot my phone normally, I was stuck in a boot loop. I still continue with the next firmware, the B122, and it was successfully loaded (this also relocked my bootloader).
- It is important to say I clear many times the cache and wipe/erase data through stock recovery options, and also tried to erecover but I wans't able to connect to the WiFi. I guess something was missing (at this point I was already going crazy).
- I was still stucked at a boot loop after loading the B122, so I decided to unlock my bootloader and flash the twrp 3.1.1-1-frd.img
- From there I tried to wipe data and cache and system and everything, but I wasn't able because an error saying unable to mount always appeared.
- After rebooting, since I already had unlocked the bootloader, the initial message prompting: "press power to continue, press for 3 seconds for erecovery, etc..." appeared.
- I enter the erecovery options with the hope it will do something... and it did!!! I could connect this time through WiFi and the system asked to update the firmware and many other things it said at that moment. This was the first time I felt relieved through the night.
- The phone updated perfectly, it started at the firmware B122 and I kept updating it until I reached the B389.
- I unlocked the bootloader again and rooted the phone. And everything is running smooth as silk!
I know this is a very long story, but I just want to get it out there in case anyone is facing the same problem I just passed. Hope this helps someone and brings peace to them! =) Good luck!
I believe B385 is not functional with TWRP. Flash B360 and reboot to recovery. This should go to stock recovery, where you will have to do a factory reset. I got EMUI working, but it refuses to update to any newer version (it does show B380 but doesn't update). Also there should be updates after making that update. The updates did work for other people, so you may be able to have it working.
juanboja said:
Hi guys,
I am currently trying to figure out how to reinstall a clean version of the B385 for my FRD-L04. I have downloaded these two files from the Nougat Update for FRD-L04 Honor 8 (USA):
Full ROM – http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1585/g104/v83098/f1/full/update.zip
Data File – http://update.hicloud.com:8180/TDS/...FRD-L04_hw_usa/update_full_FRD-L04_hw_usa.zip
I have tried to flash them both from TWRP, but I always get the error: Updater process ended error 7
Can anyone please guide me through the process and let me know what I'm doing wrong?
I have look for a guide or post where this is detailed, but without luck. Can anyone link me to a guide on how to reinstall the stock firmware in my Honor 8 FRD-L04?
Thanks! :good:
Click to expand...
Click to collapse
Try flash B360 then OTA to 388 or 391 (If 391 singed).
blackbuffalo said:
Try flash B360 then OTA to 388 or 391 (If 391 singed).
Click to expand...
Click to collapse
Thanks for the replies, any link to where I can find the B360?
Sent from my FRD-L04 using Tapatalk
juanboja said:
Thanks for the replies, any link to where I can find the B360?
Sent from my FRD-L04 using Tapatalk
Click to expand...
Click to collapse
http://pro-teammt.ru/firmware-database/?firmware_model=FRD-L04&firmware_page=0
blackbuffalo said:
http://pro-teammt.ru/firmware-database/?firmware_model=FRD-L04&firmware_page=0
Click to expand...
Click to collapse
Thank you very much for this info!
Sent from my FRD-L04 using Tapatalk
Plz can anyone help me debranding my Bln-L21?
MAK7246 said:
Plz can anyone help me debranding my Bln-L21?
Click to expand...
Click to collapse
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
read also the lasts posts
Bro My one is Bln-l21 which rom should I debrand to can anyone give me link for the firmware?
MAK7246 said:
Bro My one is Bln-l21 which rom should I debrand to can anyone give me link for the firmware?
Click to expand...
Click to collapse
Follow this post:
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
the B340 update.app link is in the one right after.
If you don't have/know about TWRP recovery:
[GUIDE] Root Huawei Honor 6X and install TWRP custom recovery (EMUI 5.X)
Note- Applicable for Windows 7, Windows 8 and Windows 10 Similar steps are applicable for EMUI 4.X as well but TWRP file will change. Hi Folks, There are few threads but most of them are old or for EMUI 4.X and users having issues while...
forum.xda-developers.com
the unlock code for your bootloader is available throught "DC unlocker" software for 4 € .
Will my device get EMUI 8 after debrand?
MAK7246 said:
Will my device get EMUI 8 after debrand?
Click to expand...
Click to collapse
Nope, you would just have done step 2 of the following post, you also have to do step 3 then:
Thread '[HONOR 6x EMUI 8.X Oreo] Installing EMUI 8.X on Honor 6X EMUI 5.X and RAM extend via SD Card' https://forum.xda-developers.com/t/...-emui-5-x-and-ram-extend-via-sd-card.4237453/
Bro where can I get stock recovery and stock erecovery
Cause I successfully debranded!
MAK7246 said:
Bro where can I get stock recovery and stock erecovery
Cause I successfully debranded!
Click to expand...
Click to collapse
they sould be in HUawei "full" rom package. Use the soft "huawei update extractor"
Djiban said:
they sould be in HUawei "full" rom package. Use the soft "huawei update extractor"
Click to expand...
Click to collapse
Bro do u have the full emui 8 firmware for Honor 6x?
@Djiban bro my build is same though it updated to emui 8 for not having the full firmware package!Do u have the full firmware?
Bro my build no. Is still same after upgrading from emui 5.0.1 to emui 8 because of not having the full firmware.do u have the full firmware package for Emui 8 honor 6x?
MAK7246 said:
Bro my build no. Is still same after upgrading from emui 5.0.1 to emui 8 because of not having the full firmware.do u have the full firmware package for Emui 8 honor 6x?
Click to expand...
Click to collapse
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Djiban said:
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Click to expand...
Click to collapse
My current one is B520 just the bui
Djiban said:
ok, there is a more recent EMUI stock firmware (B520):
Honor6X-BLN-L22HNC675CUSTC675D2B520 (8.0.0.520) - Shared with pCloud
Keep all your files safe, access them on any device you own and share with just the right people. Create a free pCloud account!
e.pcloud.link
you can use https://www.dropbox.com/s/via9iigwa5q37rf/HWOTA_BLN_Eng.zip
to install it. Some infos about that here.
You should be able to use dload official update, and somehow "Huawei updater" software or "Huawei Firmware Finder" soft or app, also to instal it.
BUT ANYWAY, you should have stock recovery already with the build you install to get EMUI 8 !!! Did you check? That would be the case, after installing the above B520.
If not, look inside those B520 zip files (using "Huawei update extractor" software for update.app if I remember well, google "Huawei update extractor" for all infos), you will get recovery .img files. Flashable with Fastboot or twrp recovery.
But I thnik you are already on stock recovery, or will be after B520 update
Click to expand...
Click to collapse
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
MAK7246 said:
My current one is B520 just the bui
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
Click to expand...
Click to collapse
you are not on B520 obviously, install the B520 provided in my previous post. You should have stock recovery afterwards
MAK7246 said:
My current one is B520 just the bui
Bro I updated to emui 8 using the update.zip and huru updater using howtabln the one which u have given but after updating the build number was supposed to be b520 but it remain unchanged I don't know the reason but emui was successfully updated to emui 8!
Click to expand...
Click to collapse
Bro is the rom indian or Chinese?
Djiban said:
you are not on B520 obviously, install the B520 provided in my previous post. You should have stock recovery afterwards
Click to expand...
Click to collapse
@Djiban bro but the link which u have given in china variant,Indian variant does not have HNC in build number,am I right?
@Djiban can u send the screenshot of ur system info I mean build info of honor 6x!
I m getting getting package info failed in erecovery since debrand can anybody help me fix this?model bln 22 emui 8 debranded from BLN-L22.
Djiban said:
Follow this post:
[Guide] Debranding to India variant BLN-L22 (successful case)- Noob Friendly
Update- Please flash the OEMINFO and Custom bin from - https://mega.nz/#!qYtlzawK!Ab86GUO40JpUZ8scGnaIszhA-3gf6bN4NdfuHb8IeBU via TWRP and then flash the B340 update.app file from download section via dload method. if you face any issue, follow...
forum.xda-developers.com
the B340 update.app link is in the one right after.
If you don't have/know about TWRP recovery:
[GUIDE] Root Huawei Honor 6X and install TWRP custom recovery (EMUI 5.X)
Note- Applicable for Windows 7, Windows 8 and Windows 10 Similar steps are applicable for EMUI 4.X as well but TWRP file will change. Hi Folks, There are few threads but most of them are old or for EMUI 4.X and users having issues while...
forum.xda-developers.com
the unlock code for your bootloader is available throught "DC unlocker" software for 4 € .
Click to expand...
Click to collapse
Hello, I am having trouble using the DC-Unlocker software. I am trying to follow this tutorial from their official website to unlock the bootloader of my Huawei Mate 9 Lite (BLL-L23) but HiSuite does not seem to work. It shows a pop-up saying "HiSuite will be installed in your device" and then another saying "Instalation error. System version is too old". And then nothing happens, and HiSuite doesn't even recognize my phone.
I have Android 6.0 Marshmallow and I'm trying to upgrade to Android 7.0 Nougat. Also, I have EMUI 4.1.3, and if I'm not mistaken, I should be able to upgrade it to EMUI 5.0.
EDIT: HiSuite seems to have installed the drivers 'Android Adapter PCUI' and 'DBAdapter Reserved Interface' despite the error, but not the 'Android Adapter Modem #2' one, and I don't know how to install it. I'd like to know I have everything needed to proceed successfully before paying the 4.00 €.
thedolanduck said:
Hello, I am having trouble using the DC-Unlocker software. I am trying to follow this tutorial from their official website to unlock the bootloader of my Huawei Mate 9 Lite (BLL-L23) but HiSuite does not seem to work. It shows a pop-up saying "HiSuite will be installed in your device" and then another saying "Instalation error. System version is too old". And then nothing happens, and HiSuite doesn't even recognize my phone.
I have Android 6.0 Marshmallow and I'm trying to upgrade to Android 7.0 Nougat. Also, I have EMUI 4.1.3, and if I'm not mistaken, I should be able to upgrade it to EMUI 5.0.
EDIT: HiSuite seems to have installed the drivers 'Android Adapter PCUI' and 'DBAdapter Reserved Interface' despite the error, but not the 'Android Adapter Modem #2' one, and I don't know how to install it. I'd like to know I have everything needed to proceed successfully before paying the 4.00 €.
Click to expand...
Click to collapse
the tutorial you're following is the good one.
What is the OS version of your computer ? try another one!
Try also to install diectly the huwei drivers without hisuite:
Huawei_Android_USB_Driver
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Djiban said:
the tutorial you're following is the good one.
What is the OS version of your computer ? try another one!
Try also to install diectly the huwei drivers without hisuite:
Huawei_Android_USB_Driver
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
Thank you for replying.
My PC runs on Windows 10, so I don't think that is a problem. I could try a Virtual Machine with another one though, which one do you recommend?
As for the instalation, do I have to uninstall my current drivers in order to install the ones you are providing me? Or does it not matter? I will try them ASAP.
P.S.: I found this thread in the DC-Unlocker forums of someone saying not all phones have the 'Android Adapter Modem #2' drivers and it should be possible to read the bootloader code of a Honor 6X without it (I am assuming that Mate 9 Lite == Honor 6X at this point). Should I trust this?
I apologize for the amount of questions, you just seem like an experienced person, and I thank you again for taking the time and having the patience of answering.