Database Info

Re lock bootloader and back to stock.

Hi everyone, please help me I read so much post on xda and I don't know how to re lock or lock the bootloader and back from android 7.0 to 6.0. The only modifications I do to my honor 8 FRD-L04 C567 B360 is I unlocked the bootloader and installed via fastboot TWRP 3.0.2 but this version can't flash only read function is operating. So I flash via fastboot the original recovery for my version extracted from the full package of android 6 MM. So I tried to install the full firmware via dload method but the system tell me is that not the correct version to my phone and I'm sure is the correct version. I still do not re lock the bootloader because I read that some people had a brick left after the re lock process. I need to sell my phone because of I need to pay debts. Please help me to restore my phone as new.

ZicoRamirez77 said:
Hi everyone, please help me I read so much post on xda and I don't know how to re lock or lock the bootloader and back from android 7.0 to 6.0. The only modifications I do to my honor 8 FRD-L04 C567 B360 is I unlocked the bootloader and installed via fastboot TWRP 3.0.2 but this version can't flash only read function is operating. So I flash via fastboot the original recovery for my version extracted from the full package of android 6 MM. So I tried to install the full firmware via dload method but the system tell me is that not the correct version to my phone and I'm sure is the correct version. I still do not re lock the bootloader because I read that some people had a brick left after the re lock process. I need to sell my phone because of I need to pay debts. Please help me to restore my phone as new.
Click to expand...
Click to collapse
Look up FRD-L04 Rollback package
Get that, extract to dload folder, flash
After that is done, put full package in dload folder, flash
Sent from my FRD-L04 using XDA-Developers Legacy app

This is for all the process or just for back from android 7 to android 6?

ZicoRamirez77 said:
This is for all the process or just for back from android 7 to android 6?
Click to expand...
Click to collapse
This Will take you back to 6, relock bootloader. Everything
Sent from my FRD-L04 using XDA-Developers Legacy app

IlluminaTimmy said:
This Will take you back to 6, relock bootloader. Everything
Click to expand...
Click to collapse
Thank you my friend, I'll do the roll back in a few hours and I tell you it all works perfectly. Thanks again

The Rollback
ZicoRamirez77 said:
Thank you my friend, I'll do the roll back in a few hours and I tell you it all works perfectly. Thanks again
Click to expand...
Click to collapse
Did the roll back work?!!

Whin77 said:
Did the roll back work?!!
Click to expand...
Click to collapse
Yes my friend, but first off all, I do the rollback 75 MB aproximelity via dload method, next to do that I have to re lock the bootloader via fastboot with the unlock code. And to finish, I install the full software of Android marshmallow via dload method (make sure that the software is in the micro SD, not in the intern memory) 3.70 GB aproximelity. My phone was like new.

Awesome
Great to hear! I managed to work out my issue with mine! I appreciate your response!

Just passing by, this is the wrong forum to post to. Here is everything related to development, not Q&A. Flagging this thread. Sorry.

Reverting to stock [SOLVED]

I have been trying to revert to stock with no luck. What I want to do is install the latest update, but I can't because I had twrp installed. I flashed the original recovery. The problem is when I try to use eRecovery I get "Getting package info failed" error. when I try to download the b385 full update for the FRD-L04 I get a dead link. I was able to download the rollback package, but will I be able to get back to the latest version after I install the rollback package? when I try to use other update packages for my phone I get "Incompatibility with current version" error. Do I need to lock my bootloader in order to update? The good news is that my phone works fine, bad news is that I can't up date.
build number: FRD-L04C567B385
Thanks

this link will help you
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445

alimir98 said:
this link will help you
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
Click to expand...
Click to collapse
Thanks for the link, I just been to heck and back with this phone. first I uninstalled Magisk. After that my phone wouldn't boot, it would just hang on the blue screen after the initial boot screen. I tried to find a stock boot Image for my version. Once I installed that my phone would boot loop so I managed to get into fastboot and flash TWRP. Once in TWRP I restored my B360 backup and got my phone working again. Then I flashed the stock recovery. Tried to boot into the stock recovery but that wouldn't load. Some how I got it to install the rollback package and now i'm at version B300. Good news is I'm back to stock and can boot int the stock recovery. Time to see if I can update to the latest version.
Edit I think I might have a problem. It won't let me update also it shows my phone as "FRD-L04C900" not "FRD-L04C567" is there any way I can fix this?

srgrusso said:
Thanks for the link, I just been to heck and back with this phone. first I uninstalled Magisk. After that my phone wouldn't boot, it would just hang on the blue screen after the initial boot screen. I tried to find a stock boot Image for my version. Once I installed that my phone would boot loop so I managed to get into fastboot and flash TWRP. Once in TWRP I restored my B360 backup and got my phone working again. Then I flashed the stock recovery. Tried to boot into the stock recovery but that wouldn't load. Some how I got it to install the rollback package and now i'm at version B300. Good news is I'm back to stock and can boot int the stock recovery. Time to see if I can update to the latest version.
Edit I think I might have a problem. It won't let me update also it shows my phone as "FRD-L04C900" not "FRD-L04C567" is there any way I can fix this?
Click to expand...
Click to collapse
I think you will have to restore you oeminfo partition backup through twrp.

On mr FRD-L09, I had to relock my bootloader, then get the rollback package and put the .app on my SD card and hard flash it, then do the same with the rom .app file. Thet got me back to stock marshamllow, and I just let all the updates run through until I'm now on the latest.
Stock is missing some bits, and has some irritations, but the camera is sooo much better than custom roms, and GPS works, as does Android Pay etc. I've not bothered rooting, AdGuard does the ad-blocking and the rest is liveable.

Well I think I'm my phone is screwed. I can't boot into recovery and when it boots it bootloops once and then it is stuck on the "your device is unlocked and can't be trusted. Fastboot still works fine I can lock and unlock the bootloader. I can flash Recovery and TWRP in Fastboot but neither one will boot. I think I might have flashed the wrong update or it happened when I flashed the rollback package. I want to try DC Phoenix but they won't let me buy credits because my PayPal account is unverified. I have downloaded the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" from the hihonor.com site. I extracted it and flashed the recovery, boot, and system image through fastboot. The phone still won't boot into recovery or boot into the OS. Is there a way to fix this or is it time for a new phone.
Thank you everybody for your help.

Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.

srgrusso said:
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
Click to expand...
Click to collapse
How did you flash the file you mentioned above? Did you put it on the SD card and used TWRP?
Also, what is so special about that file?
I have the L14 (64gb US version) and just about the same exact problem you describe.
If you have any extra steps that would help me recover mine that would be great.

anosis said:
How did you flash the file you mentioned above? Did you put it on the SD card and used TWRP?
Also, what is so special about that file?
I have the L14 (64gb US version) and just about the same exact problem you describe.
If you have any extra steps that would help me recover mine that would be great.
Click to expand...
Click to collapse
Sorry for replying so late, hopefully you fixed your phone if not here is a link with some more information.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
I followed the instuctions for the honor 7. I would recommend finding the full update firmware for your phone. It took me a lot of googling to find it. Make sure it is the correct firmware, you need to match the numbers before the B-- for me it was (FRD-L04C567) and for you it would be (FRD-L14????) I hope this helps.

hi sir
srgrusso said:
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
Click to expand...
Click to collapse
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04

sunneellkumar said:
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
Click to expand...
Click to collapse
After you flash the firmware, you must format data with emui recovery, and it will boot up

After trying different methods, this one works
Download
1 .Honor 8_FRD-L04_Rollback_Package_from_Android7.0 to Android 6.0_C900B300
2. Honor_8_Firmware_FRD-L04_Android_6.0_EMUI-4.1_C567B122_United_States_Nonspecific
Put on dload (sd card) #1 after shutdown the phone and put on the folder dload (Sd card) #2. after reboot your phone starts with android 6.0

Try this
sunneellkumar said:
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
Click to expand...
Click to collapse
Ok so i had the exact problem, im not sure if this will help but what I did was flash my cust recovery system and boot through bootloader, I then put the dload folder on my sdcard with the update.app in it, from there I put my phone into download mode so hold all 3 buttons until it goes into download mode. Once there it will automatically install the update.app, and you should be good to go. If not than go to recovery mode do a factory reset and wipe the cache and see if that works.

How to flash via TWRP a stock ROM in my problematic phone

Hi everyone.
I am facing a LOT of troubles with my phone (as stated in this thread).
Anyway now I have again unlocked bootloader, installed TWRP 3.1.1, rooted but I have a strange ROM installed by a service tech shop after the phone became unusable.
The problem is that this ROM does not show an update option in settings so I am stuck at 1st march security patches.
Here attached my actual Build Prop file.
The ROM seems to be a BLN-L21C900B300 (never heard of this and not even found on Firmware Finder) and the fingerprints show a "test keys" rom:
device: HWBLN-H
Display: BLN-L21C900B300
Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys​
If I try to flash via TWRP a BLN-L21C432B360 (which was my previous stock ROM) it does not work and on TWRP appears the following:
......
write radio image
check_write_data_to_partition
write data error
E; unknown command (errno)
update_huawei_pkg_from_ota_zip: update package from zip failed
updater process ended with ERROR: 7
error installing zip file '/external_sd/update_full_BLN-L21_hw_eu_zip'​
I cannot flash the FULL zip file with the core of the ROM but I can luckily flash the data, so I could get back Radio Fm and possibility to install themes....
To make the story short: is there someone who knows what this error is? Maybe I can get a solution.
Moreover: maybe this strange "device: HWBLN-H Display: BLN-L21C900B300 Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys" is preventing me to flash?
Changing build prop file can be useful?
Thanks to all.

Diamantes said:
Hi everyone.
I am facing a LOT of troubles with my phone (as stated in this thread).
Anyway now I have again unlocked bootloader, installed TWRP 3.1.1, rooted but I have a strange ROM installed by a service tech shop after the phone became unusable.
The problem is that this ROM does not show an update option in settings so I am stuck at 1st march security patches.
Here attached my actual Build Prop file.
The ROM seems to be a BLN-L21C900B300 (never heard of this and not even found on Firmware Finder) and the fingerprints show a "test keys" rom:
device: HWBLN-H
Display: BLN-L21C900B300
Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys​
If I try to flash via TWRP a BLN-L21C432B360 (which was my previous stock ROM) it does not work and on TWRP appears the following:
......
write radio image
check_write_data_to_partition
write data error
E; unknown command (errno)
update_huawei_pkg_from_ota_zip: update package from zip failed
updater process ended with ERROR: 7
error installing zip file '/external_sd/update_full_BLN-L21_hw_eu_zip'​
I cannot flash the FULL zip file with the core of the ROM but I can luckily flash the data, so I could get back Radio Fm and possibility to install themes....
To make the story short: is there someone who knows what this error is? Maybe I can get a solution.
Moreover: maybe this strange "device: HWBLN-H Display: BLN-L21C900B300 Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys" is preventing me to flash?
Changing build prop file can be useful?
Thanks to all.
Click to expand...
Click to collapse
U should use dload method
Sent from my BLN-L22 using Tapatalk

arshilhonor6x said:
U should use dload method
Click to expand...
Click to collapse
I forgot to mention: dload not working. Always error.
That's why I think TWRP is the only solution

B300 (at least for the BLN-L24) is the first of two update packages to rollback from Nougat to MM. The first update will take you from the latest firmware to B300 and then the second update will complete the rollback to your device's stock firmware.
dload this package to complete the rollback then do a factory reset and wipe cache partition in stock recovery. After that download and update to the latest firmware and proceed to unlock BL and flash twrp and you should be good to go.

Dazed No More said:
B300 (at least for the BLN-L24) is the first of two update packages to rollback from Nougat to MM. The first update will take you from the latest firmware to B300 and then the second update will complete the rollback to your device's stock firmware.
dload this package to complete the rollback then do a factory reset and wipe cache partition in stock recovery. After that download and update to the latest firmware and proceed to unlock BL and flash twrp and you should be good to go.
Click to expand...
Click to collapse
but you mean that I have to downgrade from Nougat to MM again?
And before doing it I have to flash the stock recovery?
My phone was, we can say, flashed in some way by the tech shop to this strange version of Nougat and with the "test keys" fingertips.
With the files you provide I should "dload"?
I do not understand your post.
please explain better.
Thanks.

Diamantes said:
but you mean that I have to downgrade from Nougat to MM again? Yes
And before doing it I have to flash the stock recovery? No
My phone was, we can say, flashed in some way by the tech shop to this strange version of Nougat and with the "test keys" fingertips. Like I said they did half of the rollback process which is why you are on B300 firmware that you cant find available for download
With the files you provide I should "dload"? Yes
I do not understand your post.
please explain better.
Thanks.
Click to expand...
Click to collapse
Download the zip I linked above from Huawei website. Extract the update.app and put it in dload folder on your external SD card and force flash (power vol - vol +). It will flash all the stock images and return your phone to factory firmware android 6.0 EMUI 4.1. It might bootloop after this but booting into stock recovery (power vol +) and perform factory reset followed by wipe cache partition will get you booting. Then you can OTA update to latest firmware and root again.

Well, I will try this weekend. Now the risk to stay without phone during working days is too high
Ah, BTW, thanks for suggestion.

Dazed No More said:
Download the zip I linked above from Huawei website. Extract the update.app and put it in dload folder on your external SD card and force flash (power vol - vol +). It will flash all the stock images and return your phone to factory firmware android 6.0 EMUI 4.1. It might bootloop after this but booting into stock recovery (power vol +) and perform factory reset followed by wipe cache partition will get you booting. Then you can OTA update to latest firmware and root again.
Click to expand...
Click to collapse
Well, I changed my mind and tried anyway now. I was just too curious.
result:
Software install failed.
Incompatibility with current version.
please download the correct update package.​
As usual. Huawei sucks. Full stop.

Diamantes said:
Well, I changed my mind and tried anyway now. I was just too curious.
Click to expand...
Click to collapse
Haha I know the feeling. First time I went to rollback i jumped the gun and said screw it only to have my phone brick and no access to adb/fastboot until the next morning.
As usual. Huawei sucks. Full stop.
Click to expand...
Click to collapse
I agree 100%
Since you have nothing to lose right now just try the whole rollback process. Here is the update that the service center used to get your phone to BLN-L21C900B300. You can try flashing that again through dload or skip to trying to flash this. There are two different firmwares listed as the 2nd part of the rollback and you already said the last one I gave you failed so give this one a shot. Let me know how it works out for you:good:

Dazed No More said:
Haha I know the feeling. First time I went to rollback i jumped the gun and said screw it only to have my phone brick and no access to adb/fastboot until the next morning.
I agree 100%
Since you have nothing to lose right now just try the whole rollback process. Here is the update that the service center used to get your phone to BLN-L21C900B300. You can try flashing that again through dload or skip to trying to flash this. There are two different firmwares listed as the 2nd part of the rollback and you already said the last one I gave you failed so give this one a shot. Let me know how it works out for you:good:
Click to expand...
Click to collapse
nothing mate.
I tried, gives me always error after entering erecovery. Same as above,
Software install failed.
Incompatibility with current version.
please download the correct update package.​
Will try another method suggested in another thread.
Will keep you updated just for your curiosity...
Cheers

Diamantes said:
nothing mate.
I tried, gives me always error after entering erecovery. Same as above,
Software install failed.
Incompatibility with current version.
please download the correct update package.​
Will try another method suggested in another thread.
Will keep you updated just for your curiosity...
Cheers
Click to expand...
Click to collapse
Have you tried the Team MT huawei multitool to flash the images from the firmware? Use the Huawei update extractor tool to get the boot,cust,recovery,system and userdata.img from the firmware you tried to flash and then put them in the unbrick folder in the multi tool. Put phone in fastboot and run the Multi tool and use the unbrick option. I know your phone is not bricked but this way it will flash all 5 images in order through fastboot. You could actually try and flash the most current firmware with this method and avoid having to system update from MM to Nougat.

yes, exactly, I am trying with multitool . another bro suggested me how to do it even if with a slightly different method.
"You need flash the oeminfo via multi tool and then same firmware file for your current version via dload. It should be fixed".
WTF....never sweat so much for a phone. And never had those problems flashing samsung... and I was flashaholic

Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.

Diamantes said:
yes, exactly, I am trying with multitool . another bro suggested me how to do it even if with a slightly different method.
"You need flash the oeminfo via multi tool and then same firmware file for your current version via dload. It should be fixed".
WTF....never sweat so much for a phone. And never had those problems flashing samsung... and I was flashaholic
Click to expand...
Click to collapse
Thats me i guess :silly:
---------- Post added at 08:13 AM ---------- Previous post was at 08:12 AM ----------
Dazed No More said:
Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.
Click to expand...
Click to collapse
I am still learning and everytime its different result . Someitmeit works and sometimes it doesn't

Dazed No More said:
Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.
Click to expand...
Click to collapse
When I go to multitool "unbrick", it asks for custom.img, but in no update.app of my firmware is present.
Moreover now I just can enter erecovery. It does not boot. I can enter fastboot only. Multitool is now not recognizing the phone. Do you know how to proceed?
I put in dload the firmware .app, but it says "software install failed"

Pheew...I managed to have again that fuc..ng C900B300.
I entered fastboot and repeated the unlock bootloader process. That way the phone got a hard reset and started over. Believe me when I say I tried all the methods I knew.
I think there is something locked somewhere in my partitions (I am not an expert of course) that prevent me to do deep modifications. Now I just can TWRP data but not the core. And again I have no update option. I think I am stuck forever at this stage with 1st march patches and nougat 7.0.
I do not think I will be ever able to have Oreo.
Amen. I am really tired to waste my time with this s**t. Next phone will be again a Samsung or One+. Full stop. Stop chinese brands.

Where are you located, Europe?

Yes

Ok bro I really hope this is it. Full firmware BLN-L21C432B151. I already downloaded it myself and checked with extractor tool it has all the images you need. Since you have fastboot back use the multi tool unbrick again and now that you have all the necessary images cross your fingers it will work.
And I agree with you about the phone. Made up my mind im giving this turd to my sister and getting the OP5T in a few weeks.

Thanks. I will do it this weekend. Today I spent 5 hours to get back my configuration after the hard reset with the apps I use for work. Cannot risk again tomorrow.
In another thread, sashank suggested to change OEM file because probably phone doesn't recognize the firmware I want to install.
It didn't work and lead me to start from scratch with the same strange build.
I will try your method but first I must study better the procedure because I don't want to mess up everything and risking to throw the phone in the garbage (where it belongs in the end...).
Thanks.

Honor 8 (FRD-L09) brick help.

Hello.
I need a help with my Honor 8, it's been bricked and I honestly don't know if there is much to do in my current situation.
So the phone has locked bootloader and stock recovery.
Fastboot always returns 'Command not allowed'
What exactly happened:
I was running Stock ROM, rooted, TWRP Recovery with unlocked bootloader.
An official OTA update popped-up on my phone, I was in a rush and I missclicked (don't even ask lol) and the update started installing, I knew I'm screwed.
So I was about to play with fastboot, but it always returned 'Command not allowed'.
And probably the worst mistake happened a few minutes ago (6:00 am trying to fix it half a sleep), I was reading some posts about the dload method, >>FASTFORWARD I installed an official update using the dload method and locked my bootloader by doing this.
QUICK SUMMARY:
So I'm stuck on a bootloop.
The 3 button combo works.
Stock Recovery works as well.
Fastboot does NOT work. (I tried flashing, unlocking, temp-booting.. but nothing)
adb always returns error:
Code:
device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
Is there ANYTHING I can do in my current situation? :crying:
Thanks in advance for any help.
Have a nice day.

Hello, as long as you have an official recovery, a proper BOOT.IMG and the dload method is working there is still a chance( i hope), the only thing you need to know is that if the firmware is the wrong for your phone it will deny it. It means that is if you try to install an android 6.0 based stock ROM over a 7.0 ROM , it will say software upgrade failed or something like that.
You need to know under which Android version you were and install the same or maybe a more recent one but not to far away from your actual ROM, try the next one. You can also try to downgrade USING a rollback package that you can download on honor official site. Make sure that's the the correct file for your phone.
Hope you'll make it bro, let me know how the situation evolve
(sorry for any language mistake, english isn't my native language.)

Rayan19997 said:
Hello, as long as you have an official recovery, a proper BOOT.IMG and the dload method is working there is still a chance( i hope), the only thing you need to know is that if the firmware is the wrong for your phone it will deny it. It means that is if you try to install an android 6.0 based stock ROM over a 7.0 ROM , it will say software upgrade failed or something like that.
You need to know under which Android version you were and install the same or maybe a more recent one but not to far away from your actual ROM, try the next one. You can also try to downgrade USING a rollback package that you can download on honor official site. Make sure that's the the correct file for your phone.
Hope you'll make it bro, let me know how the situation evolve
(sorry for any language mistake, english isn't my native language.)
Click to expand...
Click to collapse
Woohoo, after a few tries & factory resets I was able to boot my phone again using the dload method :victory: The TWRP recovery has vanished and it seems like there is no sign of root(?) either, I'm gonna redo everything again, thanks so much for your help, you saved me bro <3 Have a wonderful day.

I am really glad that you get your phone back on track ! And yh the dload method bring you to stock everything, stock recovery,stock system etc etc.
Have a nice day

crepnik said:
Woohoo, after a few tries & factory resets I was able to boot my phone again using the dload method :victory: The TWRP recovery has vanished and it seems like there is no sign of root(?) either, I'm gonna redo everything again, thanks so much for your help, you saved me bro <3 Have a wonderful day.
Click to expand...
Click to collapse
Hi Crepnik,
Even I am facing the same issue. Can you please tell me which ROM did you download.
My phone was update to Nougat EMUI 5.0
Thanks

[email protected] said:
Hi Crepnik,
Even I am facing the same issue. Can you please tell me which ROM did you download.
My phone was update to Nougat EMUI 5.0
Thanks
Click to expand...
Click to collapse
Try to flash the rollback package and then an EMUI 4.x ROM. They're both available on honor official site

Rayan19997 said:
Try to flash the rollback package and then an EMUI 4.x ROM. They're both available on honor official site
Click to expand...
Click to collapse
Hi Ryan,
Thank you so much for responding.
I could see two ROM in the official site http://www.hihonor.com/in/support/
HONOR 8 Firmware (FRD-L02, C675B130CUSTC675D002, India)
HONOR 8 Firmware (FRD-L02, Android 6.0, EMUI 4.1, C675B160, India Channel)
I tried with both the ROMs but no luck
I placed the update.APP file inside sdcard but the update stops at 5% showing that it has failed.
I also tried flashing the recovery.IMG in fastboot mode.
I have lost all the hopes in my new phone
In the rescue mode it says UNLOCKED.
Please guide me with some detailed steps.
Thanks

Flash the stock recovery of the ROM that was previously installed on your phone , then with dload method flash the rollback package downloaded from honor site , and finally flash one of the two ROM, it may resolve your issue because the phone won't accept a lower firmware without flashing the rollback package first. As long as you can use dload method it should be fine.
If it doesn't work try to flash boot.img , recovery.img, cust.img, vendor.img and system.img extracted from a clean firmware downloaded on honor official site
Let us know how the situation evolve

Need help fixing an Honor 8. Stuck on EMUI 4.0 after failing with custom ROMs

Hello! So I tried flashing a custom ROM to my friends Honor 8 after reading around a bit and such but it ultimately failed and now we're trying to get it back to the default ROM. We found a ROM download but it was for the version FRD-l09C900B120 which was running EMUI4.0 and Android 6.0. I also read that the "C" version he has doesn't receive any further updates, I'm failing to find anything on the correct "C" version anywhere. If anyone could guide me through the installation process for the correct and latest firmware it would be great!
On another note, the build in eRecovery doesn't seem to want to install the update package. It always fails pretty early on after connecting to WiFi, any fix for that would be great. Thanks!
Thanks for any help!

On which ROM was the custom ROM based? You should try to flash the rollback package with dload method and then flash B120 or another EMUI 4.X ROM with same method

Rayan19997 said:
On which ROM was the custom ROM based? You should try to flash the rollback package with dload method and then flash B120 or another EMUI 4.X ROM with same method
Click to expand...
Click to collapse
The custom ROM was Linageos 14.1, so it wasn't anything EMUI based.
I'm gonna try and manually flash the ROM from an update.app that we downloaded from the app Firmware Finder.

ZelafAry said:
Hello! So I tried flashing a custom ROM to my friends Honor 8 after reading around a bit and such but it ultimately failed and now we're trying to get it back to the default ROM. We found a ROM download but it was for the version FRD-l09C900B120 which was running EMUI4.0 and Android 6.0. I also read that the "C" version he has doesn't receive any further updates, I'm failing to find anything on the correct "C" version anywhere. If anyone could guide me through the installation process for the correct and latest firmware it would be great!
On another note, the build in eRecovery doesn't seem to want to install the update package. It always fails pretty early on after connecting to WiFi, any fix for that would be great. Thanks!
Thanks for any help!
Click to expand...
Click to collapse
You did not make any twrp backup??
You are on twrp recovery right now??
Which firmware number you were on before going to custom??

hassanjavaid8181 said:
You did not make any twrp backup??
You are on twrp recovery right now??
Which firmware number you were on before going to custom??
Click to expand...
Click to collapse
We did not make a twrp backup (In hindsight we should've....)
We don't have twrp on it right not but can be fixed if needed.
We were on the latest update available to the phone which should be latest today as well. (OTA)

Flashing it manually made the phone enter a bootloop. It didn't even start the firmware. Any suggestions?
EDIT: We got into Fastboot. What are our options?

Right now your best option in my opinion is to flash Boot.img, recovery.img,cust.img and system.img that you will extract from the UPDATE.APP of your CURRENT Rom. Then just try the dload method again and again, it may not accept the firmware you try to flash but in this case just try another, but not a lower one because you need the rollback package to do that

Rayan19997 said:
Right now your best option is to pray for USB debugging to be enabled and then unlock the bootloader if you didn't do it earlier. After that you should try to flash TWRP
Click to expand...
Click to collapse
What should we do after we've flashed TWRP? When I tried flashing LineageOS 14 it decided to fail the installation somehow and be at an endless boot animation. So I'd like to get the phone restored to EMUI5.0.

Sorry, what I said was garbage, I just edited my comment, you're so quick lol

Rayan19997 said:
Sorry, what I said was garbage, I just edited my comment, you're so quick lol
Click to expand...
Click to collapse
Well currently there's a broken firmware on it of FRD-L09C432B943... Or something like that.
I think at this point he's looking at getting a new phone all together.

No matter if the firmware inside isn't working properly, with fastboot you can manually flash each partition that is needed as long as USB debugging is enabled and bootloader unlocked. After flashing these cleans parts you can properly use the dload method , and if you get an error using dload method can you tell me which one is it? At least the device behavior.
I have to sleep, I'll be right back on the morning hope you'll make it this night , if don't , please be more specific and accurate when you describe the errors you faced, that way we will be more efficient when answering
Sorry for language mistakes, English isn't my native language :silly:

Rayan19997 said:
No matter if the firmware inside isn't working properly, with fastboot you can manually flash each partition that is needed as long as USB debugging is enabled and bootloader unlocked. After flashing these cleans parts you can properly use the dload method , and if you get an error using dload method can you tell me which one is it? At least the device behavior.
I have to sleep, I'll be right back on the morning hope you'll make it this night , if don't , please be more specific and accurate when you describe the errors you faced, that way we will be more efficient when answering
Sorry for language mistakes, English isn't my native language :silly:
Click to expand...
Click to collapse
Currently there's no working OS on it so I'm gonna see if I can find a firmware that I can flash. Do you have any idea where I can get one?

Yeah on honor official site: Hihonor
Or with firmware finder

ZelafAry said:
Currently there's no working OS on it so I'm gonna see if I can find a firmware that I can flash. Do you have any idea where I can get one?
Click to expand...
Click to collapse
If you need a full firmware then you should visit official honor site..

If you flash LineageOS on a phone without OS it won't work just because LineageOS patch the current installed System, if there is no system there is no way it will boot

hassanjavaid8181 said:
If you need a full firmware then you should visit official honor site..
Click to expand...
Click to collapse
I can't find any Honor 8 FRD-L09 downloads anywhere on the Huawei sites or Honor sites. They must've removed the downloads just like they did with the Honor 7..
Rayan19997 said:
If you flash LineageOS on a phone without OS it won't work just because LineageOS patch the current installed System, if there is no system there is no way it will boot
Click to expand...
Click to collapse
I get that now and I know how to proceed in the future.
On another note, I got a good UPDATE.APP available but it refuses to install using the dload method because the versions are different. Does anyone know which partition the USERDATA.img file goes to?

You don't have to flash each single partition but dude in my opinion it's better to flash the whole UPDATE.APP, just use the rollback package and flash a lower EMUI.
Another thing: I'm currently on honor official site and I can download firmwares, you're searching in the wrong place.
www.hihonor.com/fr/support/search-result/index.html?keywords=honor 8

Rayan19997 said:
You don't have to flash each single partition but dude in my opinion it's better to flash the whole UPDATE.APP, just use the rollback package and flash a lower EMUI.
Another thing: I'm currently on honor official site and I can download firmwares, you're searching in the wrong place.
www.hihonor.com/fr/support/search-result/index.html?keywords=honor 8
Click to expand...
Click to collapse
Thank you for that link, I downloaded it and flashed it, I couldn't find it on any other hihonor site but this French one had it.
Again, thank you, it worked flawlessly installing and it updated instantly. You saved me from a lot of worrying and anxiety about breaking my friends phone lol.

I'm really glad to read that dude

thanks for the firmware been looking for it for very long!
btw you just saved another honor 8