[ROM][X52x][OFFICIAL][9.0.0][s2] LineageOS 16.0 - LeEco Le 2 ROMs, Kernels, Recoveries, & Other Deve

[ROM][X52x][OFFICIAL][9.0.0][s2] LineageOS 16.0 - LeEco Le 2 ROMs, Kernels, Recoveries, & Other Deve

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
Encryption
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Official build: download.lineageos.org/s2
GApps: OpenGapps
XDA:DevDB Information
Lineage OS 16.0, ROM for the LeEco Le 2
Contributors
Rk585, The_Mard
Source Code: https://github.com/rk779/android_kernel_leeco_msm8976
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest TWRP
Version Information
Status: Stable
Current Stable Version: 16.0
Stable Release Date: 2018-10-02
Created 2018-10-02
Last Updated 2020-01-04

Screenshots

Gonna have a try

Is this for x620 ?

Wow! Stable Release! No alpha or betas! xD

gvvv947 said:
Is this for x620 ?
Click to expand...
Click to collapse
No. Only for snapdragon model.

Camera is not buggy ? Camcorder works fine?

Thanks for working on the ROM.
Do we need to flash a root solution?
Edit - installed magisk, and it works.
Noticed a couple of bugs -
1) the root option in system settings does nothing.
2) the network traffic monitor isn't working.

Amazing ROM! Thanks devs!

Do we need flash lazy flasher?

Bluetooth calling works?
Volume button control the ring volume?
Vpn works?
Gcam works?

Hi @Rk585,
Phone was running lineage 15.1 20180811 build with no issues.
I clean flashed the lineage 16 20181002 build with open gapps pico .
On this build , microphone, speaker/ earpiece does not work for calls.
Only way to get audio in calls in lineage 16 is to use the provided type c to 3.5mm adapter with an earphone.
This was using Airtel and Vodafone sims.
I reverted to the prior 15.1 build (clean flash) and calls work with the microphone, speaker/ earpiece.
Only change was the lineage os.
My phone is indian le 2, with 19s bootloader.
TWRP was 3.2.3 IIRC.
If you get the time, please look into it.

waiting for good feedbacks
nice one lineage team for developing android pie in such a short period of time.
observe mode

It's been about 12 hours since I flashed it, and so far most things seem to work fine, though there are a few bugs.
Calling works fine for me.
I've been having problems with my primary Airtel number for some time, and can't hear the other person if I'm in one of the back rooms of my house. But if I go to a different area and toggle airplane mode it works fine. I've got a secondary Vodafone SIM too, and that hasn't given me any problems.
The camera gave me a little trouble. The stock camera app doesn't work well. On 15.1 Footej was slow, but stable. Last night I tried using it on 16, but after working for a few minutes it kept FC'ing. Resetting the app didn't help. This morning I reinstalled it, and now it's working again. The only change in my settings is that I didn't enable stabilization this time.
For me restarting the phone is iffy. Sometimes it restarts, sometimes it hangs, sometimes it just stays off. But if I power off, and then reboot there's no problem. I had a similar problem with 15.1, which I used for about 2 days before installing this.
I'm using the latest magisk. Also since I'm not using GAPPS, I've had to make the UnifiedNLP app a system app to get navigation to work. Maybe that's what's causing the reboot issue.
Getting a GPS lock was really slow in 15.1 and used to take about 10-15 minutes. It's improved a lot in 16, and takes only a couple of minutes. But, it was almost instantaneous in Lineage 13.
There were a couple of times the phone stopped responding. It hadn't hung, and the hardware buttons still registered touches, but I couldn't exit the app. This happened with the Footej gallery app and the KORE remote for Kodi. Sorry, I don't have the log files for them as I couldn't reproduce the issue.
Battery backup seems to be really good. On 15.1, and this ROM there was hardly any overnight drain. But for me the battery percentage began varying a lot between restarts, showing 4% at one reboot, and then, without charging, showing 50% at the next reboot. I've wiped all my caches, so I'm not sure what the problem is. BatteryBot Pro says my battery is healthy, and it lasts me more than a day with about 4 hours SOT.
Fast charging seems to work too. As does the hotspot.
Thanks @Rk585 for this ROM.

Dark and black theme not working, can't scan codes, camera blurry, force closed on settings until duly sign up on Google play store before stable, no Sim deactivation or toggle as it was call

Feedback (daily use here):
- Sometimes Youtube and Spotify not playing (codec problem?);
- huge battery consumption;

[email protected] said:
It's been about 12 hours since I flashed it, and so far most things seem to work fine, though there are a few bugs.
Calling works fine for me.
I've been having problems with my primary Airtel number for some time, and can't hear the other person if I'm in one of the back rooms of my house. But if I go to a different area and toggle airplane mode it works fine. I've got a secondary Vodafone SIM too, and that hasn't given me any problems.
The camera gave me a little trouble. The stock camera app doesn't work well. On 15.1 Footej was slow, but stable. Last night I tried using it on 16, but after working for a few minutes it kept FC'ing. Resetting the app didn't help. This morning I reinstalled it, and now it's working again. The only change in my settings is that I didn't enable stabilization this time.
For me restarting the phone is iffy. Sometimes it restarts, sometimes it hangs, sometimes it just stays off. But if I power off, and then reboot there's no problem. I had a similar problem with 15.1, which I used for about 2 days before installing this.
I'm using the latest magisk. Also since I'm not using GAPPS, I've had to make the UnifiedNLP app a system app to get navigation to work. Maybe that's what's causing the reboot issue.
Getting a GPS lock was really slow in 15.1 and used to take about 10-15 minutes. It's improved a lot in 16, and takes only a couple of minutes. But, it was almost instantaneous in Lineage 13.
There were a couple of times the phone stopped responding. It hadn't hung, and the hardware buttons still registered touches, but I couldn't exit the app. This happened with the Footej gallery app and the KORE remote for Kodi. Sorry, I don't have the log files for them as I couldn't reproduce the issue.
Battery backup seems to be really good. On 15.1, and this ROM there was hardly any overnight drain. But for me the battery percentage began varying a lot between restarts, showing 4% at one reboot, and then, without charging, showing 50% at the next reboot. I've wiped all my caches, so I'm not sure what the problem is. BatteryBot Pro says my battery is healthy, and it lasts me more than a day with about 4 hours SOT.
Fast charging seems to work too. As does the hotspot.
Thanks @Rk585 for this ROM.
Click to expand...
Click to collapse
Did you play any music ..
Music from speaker does not work fine
Only one time a song played that too from retro music player then when it stopped no sound came
Ringtones work incoming call works
No issue of network stability
I tried graphene kernel it works fine but music issue was still there

Music works fine for me, as does bluetooth. I connected to my cars audio, and could use it to make calls.
I think the problem I had earlier with the hardware buttons not responding has to do with system profiles. The recent apps button would stop responding randomly, and even a restart wouldn't fix it. I disabled profiles about 7-8 hours back, and the problem hasn't cropped up again. I use profiles to keep the phone unlocked when I connect to my home wifi, so maybe it's a permissions thing.
Also, I changed my GPS backend, and now I get a fix instantly.
And it's still showing negligible idle battery drain. I'm not using GAPPS, or any social networking apps, so that may be why.
The only issues I have now are with apps not being Pie ready. My banking app says my version of Android is too new, and to wait for an update. Keepass2 FC's if I try to use fingerprints to unlock the database. And Lawnchair launcher isn't very smooth.

camcorder is crash

[email protected] said:
Also, I changed my GPS backend, and now I get a fix instantly.
And it's still showing negligible idle battery drain. I'm not using GAPPS, or any social networking apps, so that may be why.
Click to expand...
Click to collapse
What does this mean, changed my GPS backend? Could you explain?

Related

[RS988][ROM][UNOFFICIAL] LineageOS 14.1 [06/15]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void.
I am neither responsible for bricked devices, dead SD cards,
thermonuclear war, nor you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! You alone are choosing to make these modifications.
If you point the finger at me for messing up your device, I won't laugh at you, but I'll try to work with you to fix it.
Thank you Rashed97 for your RS988 device tree!
This is an unofficial LineageOS 14.1 ROM for the LG G5 RS988 . This is my first ROM, so things may go awry, but I haven't seen much evidence for that yet.
Working:
Brightness
Cameras
Fingerprint reader
Flashlight
Microphone (calling w/ Google Voice/Hangouts seems to work--that's what I use)
LED
Wi-Fi
Wi-Fi Hotspot
Quick Charge (users are reporting faster-than-stock speeds. I have experienced this as well)
Video recording (thanks @T3MPEST)
Not Working:
NFC, which includes Google Pay, etc. (thanks @-lukin-)
Loud static noise when using BT devices in calls (thanks @goast)
GPS — issues locking location while using Google Maps, etc.
Buggy media codecs preventing proper music playback; use third-party music players instead (thanks @LucklessCebu)
Audio recording (both pre-installed and third-party app) Working as of 3/10
Battery charging animation missing; "loops" LG logo (thanks @mattintoronto) Working as of 3/10
In The Works:
FM Radio Radio is apparently not included in any of the U.S. variants
Magisk Working w/ flashable .zip
Substratum Theme Engine Development on LineageOMS is currently inactive
Downloads:
I make direct links whenever possible for those of you with download managers.
20180615: MD5: db6f5cae64311f74425de7dff4f13dda
Updates: 5 June security patch, upstream Lineage updates
Android File Host
20180415: MD5: 1315911cb5c4bb875c2d1ab1b9eaa8ac
Updates: Security patch updates, upstream Lineage updates
Android File Host
20180327: MD5: e492de44bb789121916b22353a436dcc
Updated Lineage sources. Fixes double-tap to wake, screen tearing, etc.
Android File Host
20180310: MD5: 10b5c19def693e83203d5d8e07358ba6
Updates: Switched to current Lineage sources, which should fix a lot of things. Clean install will be necessary.
Android File Host
20180204: MD5: da2b6a9cd9265177566470aab2bc3aa0
I have been developer-approved! I have removed the Google Drive links in favor of Android File Host.
Android File Host
XDA:DevDB Information
[RS988][ROM][UNOFFICIAL] LineageOS 14.1, ROM for the LG G5
Contributors
NextDroid, Rashed97
Source Code: https://github.com/imasaru/android_device_lge_rs988
ROM OS Version: 7.x Nougat
ROM Firmware Required: Bootloader Unlocked, Latest TWRP installed
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-02-04
Last Updated 2018-06-18

Reserved.

NextDroid said:
Reserved.
Click to expand...
Click to collapse
Do you own Bluetooth devices? Specifically Android Wear and headphones? Just wanted to see if the Android Wear connected and worked and to see what Bluetooth calls were like. I'll back up and flash

Darn it @goast! I was just about to make another "reserved" post! Haha, just kidding. It's fine
I'll test my headphones right now and report back.
EDIT: It seems to work. Playback and the microphone on my BT headphones work.

NextDroid said:
Darn it @goast! I was just about to make another "reserved" post! Haha.
I'll test my headphones right now and report back.
EDIT: It seems to work. Playback and the microphone on my BT headphones work.
Click to expand...
Click to collapse
I'm sorry bro so everything I tested works. Bluetooth during call didn't. I have to use for work. So I restored my stock backup. I know this is a long standing upstream issue. Caller complained of loud scratching sounds during call.
If you need anymore info or anything for testing pm me and I'll respond

goast said:
I'm sorry bro so everything I tested works. Bluetooth during call didn't. I have to use for work. So I restored my stock backup. I know this is a long standing upstream issue. Caller complained of loud scratching sounds during call.
If you need anymore info or anything for testing pm me and I'll respond
Click to expand...
Click to collapse
Alright! Thanks.

Wy Wi-Fi is not woking
After flashing this Rom, my wi-fi is not working any longer. It turns on, but it won't connect.
Any Ideas?
edit: I am in Europe so I guess that's the deal... I'll flash another one

SuperQvas said:
After flashing this Rom, my wi-fi is not working any longer. It turns on, but it won't connect.
Any Ideas?
edit: I am in Europe so I guess that's the deal... I'll flash another one
Click to expand...
Click to collapse
Hm. I assume they use different frequencies 2.4/5GHz band for their wireless networks along? I'm not too sure.
Here in the U.S., WiFi works for me on the 5GHz band.
goast said:
I'm sorry bro so everything I tested works. Bluetooth during call didn't. I have to use for work. So I restored my stock backup. I know this is a long standing upstream issue. Caller complained of loud scratching sounds during call.
Click to expand...
Click to collapse
Adding to main post.

NextDroid said:
Hm. I assume they use different frequencies 2.4/5GHz band for their wireless networks along? I'm not too sure.
Here in the U.S., WiFi works for me on the 5GHz band.
Adding to main post.
Click to expand...
Click to collapse
I say I know I didn't look but all the other cm or aosp rooms had it too
Probably could be fixed but I know nothing about how to do it.
Edit: pmed u

Finally some light for RS988
NextDroid said:
Darn it @goast! I was just about to make another "reserved" post! Haha, just kidding. It's fine
I'll test my headphones right now and report back.
EDIT: It seems to work. Playback and the microphone on my BT headphones work.
Click to expand...
Click to collapse
Finally, someone is taking efforts to port ROM to this device.
Thanks @NextDroid
Will try out this rom coming weekend.
More keen on the battery performance.

rahuldg said:
Finally, someone is taking efforts to port ROM to this device.
Thanks @NextDroid
Will try out this rom coming weekend.
More keen on the battery performance.
Click to expand...
Click to collapse
Thank you!
Speaking of battery performance, I made this observation about an hour ago and was just about to post on it.
So I tried @waau 's Typhon kernel (M5 RC1) for RS988 earlier today to see whether it would work with this build of LOS. I found that Bluetooth would not work properly (as I wrote in the main post).
Thus I decided to return back to the 3.18 kernel that was built with LOS. I didn't have a .zip or an .img handy, so I reflashed the ROM to get the kernel and my Bluetooth back.
My phone was on low battery a while ago at 13%, and so I connected the charger and did something else for five minutes or so. When I got back, it was at 22%! I opened up Ampere to find something interesting... (attached photo)
Is this a feature of the stock kernel or did my reflashing "overlay" Typhon and keep Quick Charge from it? It would be nice to retest pure stock and see what happens (@goast?)
Either way, this is definitely a win-win.

Also, there weren't any camera issues on the stock kernel (before I flashed Typhon). Zoom worked and everything.

NextDroid said:
Thank you!
Speaking of battery performance, I made this observation about an hour ago and was just about to post on it.
So I tried @waau 's Typhon kernel (M5 RC1) for RS988 earlier today to see whether it would work with this build of LOS. I found that Bluetooth would not work properly (as I wrote in the main post).
Thus I decided to return back to the 3.18 kernel that was built with LOS. I didn't have a .zip or an .img handy, so I reflashed the ROM to get the kernel and my Bluetooth back.
My phone was on low battery a while ago at 13%, and so I connected the charger and did something else for five minutes or so. When I got back, it was at 22%! I opened up Ampere to find something interesting... (attached photo)
Is this a feature of the stock kernel or did my reflashing "overlay" Typhon and keep Quick Charge from it? It would be nice to retest pure stock and see what happens (@goast?)
Either way, this is definitely a win-win.
Click to expand...
Click to collapse
Those two things were broken on other devices before Typhon was made. I'd be willing to guess it some artifacts left over from Typhon. Maybe someone else can elaborate

I had no camera focus issue with stock kernel on this rom. I'm not sure about the quick charge though. I have 5 batteries so I rarely plug it in.

first custom rom i've tried on my RS988 that has worked so far. i am very impressed at the results. it just feels a lot quicker than stock nougat. sure as hell helps to not have 345830 pre-installed bloatware garbage apps.
also, my charging speed is a lot faster than stock nougat as well! normally accubattery shows my charge speed capping out at 2,480mA and right now on LineageOS i am capping out at 3,010 mA ! at that speed I could go from a dead battery to 100 percent in one hour. incredibly impressive. i don't use NFC at all and barely use bluetooth so i haven't bothered to test those things yet. so far everything else works for me. FANTASTIC WORK!

jungle35 said:
first custom rom i've tried on my RS988 that has worked so far. i am very impressed at the results. it just feels a lot quicker than stock nougat. sure as hell helps to not have 345830 pre-installed bloatware garbage apps.
also, my charging speed is a lot faster than stock nougat as well! normally accubattery shows my charge speed capping out at 2,480mA and right now on LineageOS i am capping out at 3,010 mA ! at that speed I could go from a dead battery to 100 percent in one hour. incredibly impressive. i don't use NFC at all and barely use bluetooth so i haven't bothered to test those things yet. so far everything else works for me. FANTASTIC WORK!
Click to expand...
Click to collapse
Well this is great news! Thank you for trying this out I'm glad it's working out!
@goast Maybe this is an indication that this is the Lineage kernel and not Typhon. Now that I think about it, the kernel is compiled at buildtime into a single file, which is stored in the boot partition. I doubt that it is a system of directories that could have some files overwritten.
Also, I think I see the BT calling problem you were talking about. I attempted to make a recording with both the preinstalled Recorder and a third-party app and I got static. When I made a call over Wi-Fi using Hangouts, though, I had no issues.
Also, final thing: have any of you tried to flash a Magisk .zip or SuperSU? I have tried countless times but have not had any success :/

NextDroid said:
Well this is great news! Thank you for trying this out I'm glad it's working out!
@goast Maybe this is an indication that this is the Lineage kernel and not Typhon. Now that I think about it, the kernel is compiled at buildtime into a single file, which is stored in the boot partition. I doubt that it is a system of directories that could have some files overwritten.
Also, I think I see the BT calling problem you were talking about. I attempted to make a recording with both the preinstalled Recorder and a third-party app and I got static. When I made a call over Wi-Fi using Hangouts, though, I had no issues.
Also, final thing: have any of you tried to flash a Magisk .zip or SuperSU? I have tried countless times but have not had any success :/
Click to expand...
Click to collapse
I think it is LineageOS itself in regards to the quick charge. I went from stock Nougat -> flashed the stock Nougat 21c build for RS988's via TWRP -> flashed LineageOS and from the first time booting up into LineageOS the quick charge was working already. It won't tell you it's quick charging in the notifications the same way stock Android does, but if you monitor it with Accubattery or a similar app you will see the charge rate is definitely quick charge.
In regards to Magisk, that is how I am rooted right now. Using the patched bootloader method caused me to boot loop so I just flashed Magisk 15.3 via TWRP then installed Magisk Manager and it worked perfectly. No problems with root at all and all the apps I've tried so far that required root access have worked. I am really really liking this setup a lot. Overall this is much faster for me than stock Android was due to how many bloatware apps LG included by default.
Will continue to test it out during my day to day use and see if I come across any problems. Once again, great work @NextDroid !!

NextDroid said:
Well this is great news! Thank you for trying this out I'm glad it's working out!
@goast Maybe this is an indication that this is the Lineage kernel and not Typhon. Now that I think about it, the kernel is compiled at buildtime into a single file, which is stored in the boot partition. I doubt that it is a system of directories that could have some files overwritten.
Also, I think I see the BT calling problem you were talking about. I attempted to make a recording with both the preinstalled Recorder and a third-party app and I got static. When I made a call over Wi-Fi using Hangouts, though, I had no issues.
Also, final thing: have any of you tried to flash a Magisk .zip or SuperSU? I have tried countless times but have not had any success :/
Click to expand...
Click to collapse
Cool. If you can get me a log of the issue I can pass it along if you can't figure out a solution
If you think you have one and run a test build let me know too lol

First off all, thanks for your work, this is a big step in having more roms developed since a couple of them follow the lineage branch.
I'm not a dev so probably this is just a stupid idea, but seeing that the main problems for the bugs appears to be the base kernel, maybe something can be ported from the LG V20 kernel in order to fix those problems since both phones share mainly the same specifications and the V20 has official lineage branch.
Also maybe check the wifi/bluetooh drivers in custom V20 kernels for lineage.
My previous phone was a motorola verizon droid turbo, and a lot of its development was thanks to the nexus 6, and moto x repository.
Just a thought.

SuperQvas said:
After flashing this Rom, my wi-fi is not working any longer. It turns on, but it won't connect.
Any Ideas?
edit: I am in Europe so I guess that's the deal... I'll flash another one
Click to expand...
Click to collapse
I know i had trouble connecting to my 5GHz wifi at home until I set my router to only use one channel. Currently its using channel 36, and its been working just fine ever since i changed that.

[9][UNOFFICIAL][BETA] CarbonROM | cr-7.0 [z3c]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
NOTICE: THIS IS AN EARLY BUILD. There will be changes in the release branches like changed/removed features or similiar.
BUGS:
We found the camera to be a little wonky on occasion. Working on that. Currently waiting between pictures is working around the issue.
Video Recording is not working
Please feel free to look, build, and use our code at CarbonROM's GitHub...
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! These builds are experimental and can contain Bugs (as listed above). Make sure to do backups.
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
5) Please keep bugreports to this thread or Discord. Do NOT create a Jira ticket. This is still in early development so we don't accept any bugreports yet.
Download
Download Mirror
Join the CarbonROM Discord server
Meet us on Telegram
GitHub
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the Sony Xperia Z3 Compact
Contributors
Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: AOSP
Version Information
Status: Beta
Created 2019-03-02
Last Updated 2020-02-08

I'm so hyped for this rom, using cr 6.1 so far and its rock stable while beeing smooth. Will test 7.0 soon.
Thank you

delete, wrong theme.

Yes! So excited to see this

Just pointing out that Double-tap to wake is still broken in the latest build. Battery drain that started with the previous build is also still the same (nearly 20% over a 6 hour night).
Thanks for the good work otherwise and keeping older devices up-to-date!

reserved

yxagasasgas said:
Battery drain that started with the previous build is also still the same (nearly 20% over a 6 hour night).
Click to expand...
Click to collapse
Why must accudrain so poor in custum rom? Actual i`m back to stock and drain over a 12h night is only 2%.

heross said:
Why must accudrain so poor in custum rom? Actual i`m back to stock and drain over a 12h night is only 2%.
Click to expand...
Click to collapse
This is a new-ish issue that started with the end of January build, in previous builds of CR7 (that aren't hosted anymore), battery usage was just fine, and I would expect that to get fixed again.

Tried it for the last day, was on CARBON-CR-7.0-TBA-UNOFFICIAL-z3c-20190129-1316.zip for the last month. And I've noticed some great improvements so far:
the great news:
I wasn't able to reproduce the lockscreen and notification bar bugs anymore.
docking the phone seems to work now also without problems
viewing .gif and videos directly in Whatsapp is working again
performance is splendid
the bugs still present:
battery drain seems to be still present (but no problem getting over a day with moderate screentime for me)
the camera: video recording is not working at all. changing between front and back camera multiple times doesn't crash anymore, which is great. The bug about the second picture crash while using the stock camera app is still present. Taking multiple pictures directly in whatsapp is working. Frontcam does show a correct live picture and taking a picture does work as long as you don't try to use the display flash (stuck on display flash).
double tap to wake doesn't work
Not tested: USB and Wifi tethering
Well, I can live with the few bugs listed above for now, as long as you don't use the camera too often or just use Whatsapp for taking pictures directly, nothing is stopping me from using this rom anymore.
Thanks for keeping my favourite phone up to date!

Big thanks to @Myself5 and the team to keeping z3c alive!
Clean flashed the 29/01, dirty flashed 02/03 and dirty flashed 21/05 (using modules from here). Regarding to bugs these are the most visible that I encountered so far:
battery drain still high in my view but I'm still investigating (It seems a bit better than the last CR6.1 tho)
video recording is kinda broken!? I don't know how but I managed once to get video from front camera, using back camera it didn't work at all till now. Switching between cameras and modes also make the camera stops. While playing music I tried to record videos and when the camera stopped the music switched or also stopped every time (don't know if it matters or not). Fixed on 21/05/2019 build
manual network selection not working (cannot select network but it connects fine on automatic mode) Still present on 21/05/2019 build
clock overlay even after changed its position, after taking screenshot or pulling down the status bar it disappears (minor bug) Fixed on 21/05/2019 build
I suspect there might be an issue with alarm since I set up it to 6:12 and it rang at 6:22... I'll keep investigating trying to get logs..
No FM Radio..
Every time a new app is installed using 'files', screen freezes (trying to get logs)..
Offline charging not working(?)
Logs and screenshots are attached. Will update this as I find more relevant things...
Cheers!

The latest build (0302) brings big improvements to GPS navigation. It seems to be working now. The bugs I've faced are the following:
1 - WiFi tethering is still not working for me. After toggling it on, it starts the process, turning the WiFi radio off, but it is automatically toggled off right afterwards, and WiFi is turned back on.
2 - Screen cast seemed to connect, at first attempt. My smart TV showed the connection screen, but my Z3C phone undergone a soft reboot. Further attempts showed no TV sets available in my local WiFi network.
I'm keeping this ROM, anyway. Thank you very much!

hi, nfc payement is working on this release?

First impressions
@Myself5: Thanks a lot for making cr-7.0 for the Z3c! :victory: I know that it's not finished yet, so I want to share my own first impressions.
Since I have a spare second Z3c, I used my working cr-6.1 installation from my first Z3c (which I transferred via TWRP backup) and installed cr-7.0 plus 9.0 Gapps ontop of it.
Basically it works, but I have a big problem using an SD card. If I already have it inserted when booting up cr-7.0, the phone reboots at lock screen or soon after unlocking. If I don't have an SD card inserted when booting up, everything is fine and I can use the phone, but as soon as I insert a card, it reboots.
This behaviour stays the same even after freshly formatting the SC card on my PC. And - before anyone asks - I have the same problem after clean-flashing cr-7.0, so it's not caused by dirty-updating from cr-6.1.
Does anyone else have such SD card / reboot problems and knows how to solve them?
I just did another test after fully removing the partition from the SD card by using a partition tool on the PC and then letting the cr-7.0 phone do the formatting. Now it seems to work well, no reboots anymore. Now the card is formatted in FAT32, whereas before it was formatted in ExFAT, so probably ExFAT support is missing or buggy!?
About battery usage: As some users already wrote, so far it's worse than on cr-6.1. During standby at night, the cr-6.1 phone had a battery drain of only about 0,3 %/h, whereas the cr-7.0 phone had a battery drain of about 1,8 %/h. On the cr-7.0 phone, the mobile network ("Mobilfunk") consumes more than on the cr-6.1 phone, so maybe that's the culprit?
About double tap to wake: It's working for me, but I had to activate it via Kernel Adiutor.
About camera: I have the same problems which have already been mentioned.
General: CarbonROM 7.0 already seems to run smooth and stable. What's great is that I can use EdXposed (I mainly need it for the Disable Desk Dock module because otherwise I wouldn't be able to properly use my car holder) but at the same time still pass SafetyNet and use banking apps (putting them on the black list of EdXposed).
For now, I will stay on cr-6.1 for daily usage until the battery drain and camera problems have been fixed, but I will update cr-7.0 on my second Z3c and see how the development goes on. I likely will also make and maintain a "user experiences and issue list", like I did on the cr-6.1 thread (I already reserved post #6 for this.)
Keep up the great work!

okij said:
Basically it works, but I have a big problem using an SD card. If I already have it inserted when booting up cr-7.0, the phone reboots at lock screen or soon after unlocking. If I don't have an SD card inserted when booting up, everything is fine and I can use the phone, but as soon as I insert a card, it reboots.
This behaviour stays the same even after freshly formatting the SC card on my PC. And - before anyone asks - I have the same problem after clean-flashing cr-7.0, so it's not caused by dirty-updating from cr-6.1.
Does anyone else have such SD card / reboot problems and knows how to solve them?
Click to expand...
Click to collapse
Same here. I did a clean flash and I couldn't manage to pass the lockscreen. I didn't have such a problem on the 20190129 version.

SD card worked without issues for me, 32GB FAT32.
Can also confirm that enabling DTTW from within Kernel Adiutor works.

@Myself5, about the so far not working exFAT on Pie: They seem to have the same issue on the LineageOS 16 thread:
NeoArian said:
There is another build uploading to the usual folder, it has sdFat driver and uses it also for exFat, i hope it can solve the problems with sdcard's. Please report back if there is any luck
Click to expand...
Click to collapse
But unfortunately it's not solved yet.
Maybe you and @NeoArian could work together to fix this issue? :fingers-crossed:

New build
Just finished uploading a new build.
Small Changelog:
March ASB
Hotspot fix thanks to @NeoArian
Other reported bugs are currently WIP. E.g. we made some breakthroughs on Video recording, more on that soon.

Hi myself5. The new release of ROM does not work for me. I flashed clean, but after some seconds after first boot the phone rebootet (home screen was already appeared). And it robots anytime shortly after boot. I can e.g. just insert sim pin, but at least then the phone is booting again.
I tried first flashing with gapps, but also without flashing gapps, so only ROM, shows same result.
Greetings Odiad

odiad said:
Hi myself5. The new release of ROM does not work for me. I flashed clean, but after some seconds after first boot the phone rebootet (home screen was already appeared). And it robots anytime shortly after boot.
Click to expand...
Click to collapse
I bet that you are using an exFAT formatted SD card, since I faced the same problems.
Your only options ATM are not to use an SD card or to format it in FAT32 file system (which has some drawbacks of e.g. not supporting files > 4 GB in size).
Hopefully the devs will get it fixed soon. :fingers-crossed:

okij said:
I bet that you are using an exFAT formatted SD card, since I faced the same problems.
Your only options ATM are not to use an SD card or to format it in FAT32 file system (which has some drawbacks of e.g. not supporting files > 4 GB in size).
Hopefully the devs will get it fixed soon. :fingers-crossed:
Click to expand...
Click to collapse
I turned my Z3C phone, running the latest 0310 build, off, then, for test purposes, inserted an exFAT formatted card into its slot, and turned it back on. For me, a specific popup message came up stating that that card was not supported, but no unexpected reboots. I wonder what might cause reboots in your case? The Gapps package, perhaps? I use the opengapps mini one.

[9.0] ResurrectionRemix Official 7.0.2 [whyred]

Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.

Reserved

Just flashed no issues running well

Welcome again...
Sent from my GM1917 using Tapatalk

Thank you for updating this ROM.

Two things are noticable :
LED notification does not work during charging
Battery consumption is agressive
But overall it's a beast ! Kudos to the development team .

IMHO best rom for Whyred. Thanks dev! I have not found any relevant bug as of now, absolutely recommended for daily usage

Thanks for the update, im using it right now run smooth and no bugs found.

I have random signal drop, this happens often also on other custom roms except some. For example not on Arrow Os.. can we investigate?

0lorenzo said:
I have random signal drop, this happens often also on other custom roms except some. For example not on Arrow Os.. can we investigate?
Click to expand...
Click to collapse
i have the same problem, try to change kernel and firmware, but still the same, do you found the solution ?

Whatsapp freezes on my device. Ive attached screenshots of the system log. Is it a problem with the ROM or the app? I'm using the beta version btw. But it worked completely fine on PE ROM.Pls help. Thanks

Horrible signal performance, crazy signal drops even tough I live close a signal antenna

DRAKUL666 said:
Horrible signal performance, crazy signal drops even tough I live close a signal antenna
Click to expand...
Click to collapse
Someone will come along and tell you that is not possible, since the modem drivers are in the FW. And you may be sitting there with several ROMs which you can just reload from a backup and compare. Even the time it takes to log onto network or GPS can differ. You watch and hear the difference. But whom am I, only :silly:
Serious, if you are on 10.3.2 and it's drops connection re-flash FW, and if still does not work, then try another ROM.

Facing call issues on this rom. Neither can i nor the other person is able to hear or talk properly. Pls tell me a solution for this. I cant talk to anyone properly. Will have to switch ROMs if there's no solution .

Since I flashed 9/15 update, display is flickering when I reboot system and I cannot see lockscreen. Every funtion is not working.. So sad...

I dirty flashed it from 20190714 directly to 20190915 (to do this I had to update firmware which was never updated before to V10.3.2.0.PEIMIXM) and have been using this ROM for 4 days. Till this morning I noticed only one problem – LED notification doesn’t work at all including notifications for new events and charging light. Other things, like battery life, performance, camera, sound, Bluetooth, Wi-Fi/mobile signal is awesome.
But this morning I find out that my phone had turned off by itself during night time and morning alarm have had not work as well. When I powered up phone it just came back as normal (boot sequence, request for decryption password, further boot sequence, asked for pin for both of the sim cards). During the day phone also works just fine, no unexpected reboots and/or shutdowns. So for this random shutdown I’m going to blame not the ROM itself but weather condition (room window was opened so room temperature was about 5-8 degrees cesium maybe that caused phone shutdown). Do you experience any random reboots and/or shutdown using this ROM?
So one more time – this ROM is AWESOME, thank you for your incredible work Looking forward for future updates.

No internet
ROM is super great, but won't be able to use internet, but you can use Wi-Fi, but mobile data always show "No internet" except for 3G sometimes

Can I get kernel recommendation that matches this piece of art Rom? (To balance battery consumption and performance)

Hi, thanks for reopening the thread again. I still keep using RR even when it is keep updating silently.
I currently use TWRP 3.3.1-1, Magisk 19.3, fw MIUI Pie 10.3.2.0, stock kernel from each ROM version. I clean flash when coming to the first RR which use pie firmware. I want to report several version bugs
1. Forgot since which pie version (still fw oreo), the network speed indicator still disappear after each reboot. And sometimes it also disappear by itself, intermittenly and without any specific cause. When I set Resurrection Tools > Status Bar > Clock > Date > Normal Font size (or small), it seems to disappear more frequently. It seems like the statusbar is not enough wide, although I have already set the display font size to the smallest. (I still have a lot of free space in statusbar). I still have the bug till now.
2. 20190829 : When using bluetooth headset, I face random freeze and then auto full reboot. This happens only when the bluetooth is streaming audio, not when standby connected. It also occured in 20190915. I got this approximately twice a week.
3. 20190915 : I just try this last sunday. I am using wifi all the time.
- On Monday, when I turn off wifi and turn on mobile data, suddenly the phone soft-reboot (it just blackout, dark for about 7-10 seconds, then back to lock screen and ask for password).
- After a while, it loop back again to blackout and to the same lockscreen.
- I immediately know this is because the mobile data. But it freak me out, because it is very difficult to unlock and turn off mobile data while it lags when loading the soft-reboot.
- After several tries, I managed to unlock and then quickly turn on airplane mode. Then phone now don't soft-reboot anymore
- I am curious. I disable the lock pattern state temporary using Automagic (so I don't have to erase the password or fingerprint), then try again. Still the same soft-reboot after turning on mobile data.
- Using wifi, I have no problem at all. If I have wifi on and connected, even mobile data turned on, it won't reboot.
- But as soon as I turn off wifi and the mobile data is connected, the looping soft-reboot happen again.
- Trying to flash previous 20190829 boot.img, still the same problem
- I dirty flash back tto 20190829, the problem disappear immediately. Now mobile data connected and phone still run fine.
- My Primary sim card with mobile data is Smartfren, which operate only at LTE FDD 850 Mhz and TDD 2300 Mhz. Second SIM card doesn't have internet (I have disabled the service), and doesn't cause soft reboot.
I wonder if there is anything wrong with the TWRP, magisk, firmware or anything other. Logcat text file is attached : View attachment 4832885

e.r.e.d said:
i have the same problem, try to change kernel and firmware, but still the same, do you found the solution ?
Click to expand...
Click to collapse
No... Waiting for a response/clarification

[ROM][UNOFFICIAL][11.0][ I9305 ][ LineageOS 18.1 ][BETA][TREBLELIZED]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 18.1 for our Samsung Galaxy S3 (I9305).
At first I want to thank @rINanDO, @ChronoMonochrome for all your work.
This Rom is based on I9300 LOS 18.1 .
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
GSI flash
NFC
BT headset call
Tethering
much more...
Spoiler: Whats not working
Screen Cast, Chromecast did work, Samsung TV not
Random reboots
SD-Card can't be formatted as a storage expansion, your device will crash
Maybe more
Spoiler: Links
TWRP
I9305 ROM
Magisk zip file
Spoiler: Changelog
26.10.2021
09.11.2021
10.12.2021
06.01.2022
19.01.2022
22.02.2022
20.04.2022
If you are going to use Gapps,
here you can download them:
Open Gapps
For the others, you can use microG.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][I9305][BETA] LineageOS 18.1, ROM for the Samsung Galaxy S3 LTE
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2021-10-08
Last Updated 2022-04-20

If you're interested in flashing your first GSI, follow this thread (also alpha):
[GSI][11][ EXYNOS4 SMDK4412 ][N8000, N801X, N8020, I9300, N5100, N51XX, N7100, ...][ALPHA] [EOL]
Here you will find my exynos4 compatible GSI's. This work is based on the magic of @phhusson, so thank you very much for this. Don't forget, that you need an treblelized ROM to support this. Do you like my work? Than you can simply hit...
forum.xda-developers.com

First test build is online, have fun .

html6405 said:
First test build is online, have fun .
Click to expand...
Click to collapse
Thank you!
Clean-installed lineage-18.1-20211008-HTML6405-i9305 and it's looking really good.
I've installed LOS and the same apps as when trying out the 19300 build. No Gapps or Magisk.
All of the things I observed as not working with the i9300 build on this device are now working:
Hardware buttons are now working
Home button now wakes device
Wifi connects automatically to dual-band network and seems stable
GPS is working. I haven't tested thoroughly, but it does see satellites, which it couldn't before
Camera works and photos are right-side up
Screen rotation is working correctly (once I turned on 270 degrees in rotation settings - other angles were already on).
Audio volume is still low on internal speakers, but fine on Bluetooth.
I haven't yet tested telephony (which didn't work on the i9300 build). Going to leave the device on for a while to see if it's stable.

lpedia said:
Thank you!
Clean-installed lineage-18.1-20211008-HTML6405-i9305 and it's looking really good.
I've installed LOS and the same apps as when trying out the 19300 build. No Gapps or Magisk.
All of the things I observed as not working with the i9300 build on this device are now working:
Hardware buttons are now working
Home button now wakes device
Wifi connects automatically to dual-band network and seems stable
GPS is working. I haven't tested thoroughly, but it does see satellites, which it couldn't before
Camera works and photos are right-side up
Screen rotation is working correctly (once I turned on 270 degrees in rotation settings - other angles were already on).
Audio volume is still low on internal speakers, but fine on Bluetooth.
I haven't yet tested telephony (which didn't work on the i9300 build). Going to leave the device on for a while to see if it's stable.
Click to expand...
Click to collapse
Update: saw a random reboot after ~4 hours during which the device was continuously playing music via a Bluetooth speaker.

lpedia said:
Update: saw a random reboot after ~4 hours during which the device was continuously playing music via a Bluetooth speaker.
Click to expand...
Click to collapse
Thanks for testing, but you can't compare these two builds because of different hardware .
If you're facing a random reboot, it would be great to create a last_kmsg file and send it to me,
otherwise I can't debug anything.
lpedia said:
Audio volume is still low on internal speakers, but fine on Bluetooth.
Click to expand...
Click to collapse
You could change the Speaker Boost Volume level from 6 to 7 in the /vendor/etc/sound/i9305 file,
this will increase the audio volume.
I will include this in the next build.

html6405 said:
Thanks for testing, but you can't compare these two builds because of different hardware .
Click to expand...
Click to collapse
Yes, I wasn't intending to suggest that they are directly comparable - just confirming that everything that's supposed to be working is working.
Telephony is working, I can now confirm. The SIM was visible but not active on reboot after inserting the SIM, and after a second reboot it became active.
html6405 said:
If you're facing a random reboot, it would be great to create a last_kmsg file and send it to me,
otherwise I can't debug anything.
Click to expand...
Click to collapse
Good - I was going to ask just what logs you'd like me to collect re the reboots. I'll grab last_kmsg next time it random reboots.
There've been two random reboots since install, both while it'd been playing music over bluetooth continuously. The first was after ~4 hours and the second ~2 hours. I will just leave the device idle now and see if it happens when it's in deep sleep. There are no tombstone files, by the way.
html6405 said:
You could change the Speaker Boost Volume level from 6 to 7 in the /vendor/etc/sound/i9305 file,
this will increase the audio volume.
I will include this in the next build.
Click to expand...
Click to collapse
Thanks! That does help (after a reboot). Still not loud, but it is more audible.

@html6405 - I have a logcat and last_kmsg from a strange half-hung event this morning. Should I upload here, or would you prefer a PM?
The device had stayed up without a random reboot overnight (and ~75% deep sleep). I connected the Bluetooth speaker and started the VLC media player. For a while, all seemed well. Then I pressed Home to send the player to the background, and instead, bootanimation started. Very briefly - didn't complete half a loop - then the screen went blank, hardware buttons were lit, and no response to buttons or quick press of power button.
adb could still connect to it, so I grabbed the logcat and last_kmsg before trying anything else. htop worked, but none of the running processes seemed to be using an unusual amount of memory or processor, so I didn't try killing any.
I had to force-restart (Power and Volume Down) to get it to respond.
Now it tells me there are new updates. Is that expected?

@html6405 - the 9 October OTA update dowloaded and installed via TWRP, and the system booted OK. I connected the bluetooth speaker and started playing music via VLC media player. The system rebooted almost immediately. The attached zipfile contains last_kmsg (called last_kmsg-2) taken after that reboot, plus the last_kmsg and logcat from the 8 October build, mentioned in my previous post.

lpedia said:
Now it tells me there are new updates. Is that expected?
Click to expand...
Click to collapse
Sure, I've set the audio volume to the maximum.
lpedia said:
The system rebooted almost immediately
Click to expand...
Click to collapse
Ok, this was a modem crash, thanks for your log, I will take a deeper look into it.
I'm not sure why the crash happened.

html6405 said:
Sure, I've set the audio volume to the maximum.
Ok, this was a modem crash, thanks for your log, I will take a deeper look into it.
I'm not sure why the crash happened.
Click to expand...
Click to collapse
@html6405 - the device got another OTA update today. Thank you - and I like the fact that they install automatically via TWRP!
It has had quite a few random reboots now, and ALL have been while it's playing music files continuously. It does this with LOS's music player and with the VLC app, and it doesn't matter whether the audio files are local or on a network fileserver, or whether the output is bluetooth speaker, wired headset, device speakers, or muted. After a variable length of time playing - usually 15-30 minutes - the device will suddenly reboot.
But it doesn't seem to do it when playing video continuously. I haven't tested this thoroughly, but yesterday VLC played video files from a network fileserver for over four hours without any reboot. I'll try it again today to see if that's consistent.
Do you need any more last_kmsg files - or only if it reboots under different conditions?

lpedia said:
Do you need any more last_kmsg files - or only if it reboots under different conditions?
Click to expand...
Click to collapse
Sure, just send them to me via PM and then I will analyze them, maybe they will help me to find the root cause.

for the GSI there is no i9305 images
Where to find em,or they are avaiable at treble info?

Noobmaster20 said:
for the GSI there is no i9305 images
Where to find em,or they are avaiable at treble info?
Click to expand...
Click to collapse
The GSI from the linked thread and all coming GSI's should fit for all exynos4 devices.
But I had no time to test it on the I9305, there will come updated versions soon.

Update 26.10.2021:
Fixed modem crash issue in Kernel, the connection still get's lost sometimes and you still have to reset the APN settings after every boot, I'm working on this...

I'm testing this ROM right now, unfortunately I lost my SIM card day ago so can't say anything about mobile data etc. In 2 hours of listening music on youtube, using social media apps and browsing web there wasn't any reboot. I didnt encounter any major bugs, one thing that is happening to me is when i try to send photo (directly from camera, not gallery) in messenger app, when i click to send photo it is jest restarting messenger application, I will test how it is with other apps and edit this post. In overall this ROM is working really nice. Thank you for working on this ROM. Maybe it is now not the smoothest or fastest working ROM but it is usable and gave me "fresh feeling" of this old phone
EDIT: sending photos from camera works on instagram

Is it possible to get the GPS time fixed?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ducks1 said:
Is it possible to get the GPS time fixed? View attachment 5443741
Click to expand...
Click to collapse
Where are you facing this issue?
I will check this!

html6405 said:
Where are you facing this issue?
I will check this!
Click to expand...
Click to collapse
The screenshot is from an app called GPSTest https://github.com/barbeau/gpstest

ducks1 said:
The screenshot is from an app called GPSTest https://github.com/barbeau/gpstest
Click to expand...
Click to collapse
Hmm ok,
I've downloaded the GPSTest app from the playstore and I didn't get this message,
do I have to do anything to see this?
For sure I've tried GPS outside.

[ROM][11.0][UNOFFICIAL][M7-ALL] LineageOS 18.1 for MicroG [STABLE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This ROM includes MicroG. The microG project creates an alternative to installing Gapps, which install and execute closed-source blobs on our phones. This ROM is a fork of LineageOS with just the necessary changes to have microG built-in. Find out more on https://lineage.microg.org
It is strongly advised not to install GApps as this ROM includes a replacement for them.
This ROM is based on the build of @tarkzim (see here: [ROM][11.0][UNOFFICIAL][M7-ALL] LineageOS 18.1 [STABLE])
If you are looking for a build without microG, see my other build here : [ROM][11.0][UNOFFICIAL][M7-ALL] LineageOS 18.1 [STABLE]
Bugs
What's working:
Boot
NFC
Audio Playback
GNSS GPS
RIL (LTE/CALL/SMS)
DT2W (Double tap to wake), for now you have to use Kernel Adiutor or other kernel tweak apps to enable it.
Camera / Camcorder
WiFi
Hotspot (2.4Ghz / 5Ghz)
Bluetooth
USB (ADB/MTP/PTP)
IR Blaster
Sensors
Proximity / Light Sensor
Touch
SELinux is enforcing
What's not working:
Hardware Encryption
Wifi won't connect to WPA2 / WPA3 mixed mode networks
FM Radio
You tell me.
Installation instructions
Download the zip(s).
Install newest TWRP
Perform a TWRP backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash ROM.
Do not install Gapps!
F-droid is already included. Install Aurora-Store via F-droid to access and install usual apps.
If you'd like to sync Google Calender and Contacts use this tutorial [Google Sync Adapters] How to sync them with microG or this Magisk module: GoogleSyncAdapters for Magisk
If you'd like to hide Magisk from certain apps, use the Magisk module Shamiko (Magisk is not included in this ROM, you have to root the device yourself)
Supported models:
m7: m7ul, m7spr, m7vzw
Downloads
Recovery : Official TWRP
Rom : Download
Sources
HTC MSM8960 Android Dev
Donate
DONATE to tarkzim
Donate to me
Big Thanks
LineageOS Team.
@tarkzim
@ Flyhalf205
@ icxj1
@ R1ghtC
@ gimmeitorilltell
All M7/MSM8960 contributors.
Source Code: https://github.com/LineageOS4microg
ROM OS Version: Android 11
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 5.X
Based On: LineageOS for MicroG
Changelogs
2022/04/09
Updated Android with April 2022 security patches.
2022/05/13
Updated Android with May 2022 security patches.
Selinux set to enforcing
2022/06/01
Corrected several Selinux denials
2022/06/04
Fixed several ueventd permission errors
2022/08/20
Updated Android with August 2022 security patches.

Thanks for that zsoerenm.
I have tried it and it seems to work at a first impression. Unfortunatly I need the play store so I hat to switcheback to tarkzim's version without microg so it has run only short at my phone without haveing any problems regarding sim card detection wifi and so on.

Have you tried Aurora Store?
You can also download apps, that you have already purchased, if you log in with your Google account in Aurora Store.

New build released
Updated Android with May 2022 security patches.
Selinux set to enforcing
This update can be dirty flashed (Clear cache and Dalvik cache)

There seems to be a problem with selinux still. After some suspend time the display won't wake up and surfaceflinger has 100% CPU usage and deadlocks. I, therefore, recommend to use the 2022/04/09 build or manually set selinux to permissive with setenforce 0 (You'll need to do this after every reboot and you'll need to enable root debugging in developer options).
I'm not totally sure how to debug this issue. Unfortunately, dmesg doesn't reveal any denied requests, that could be a problem. I've already allowed other denied requests, that were visible in dmesg, but they did not solve the problem.

New build released
Corrected several Selinux denials
This update can be dirty flashed (Clear cache and Dalvik cache)

New build released
Corrected several ueventd permission errors
Finally, this seems to fix the wake up issue that I described above.
This update can be dirty flashed (Clear cache and Dalvik cache)

@beanpeti
I've created a new build release without microG (see here: [ROM][11.0][UNOFFICIAL][M7-ALL] LineageOS 18.1 [STABLE])
Let me know what you think.

zsoerenm said:
New build released
Corrected several ueventd permission errors
Finally, this seems to fix the wake up issue that I described above.
This update can be dirty flashed (Clear cache and Dalvik cache)
Click to expand...
Click to collapse
zsoerenm said:
New build released
Corrected several ueventd permission errors
Finally, this seems to fix the wake up issue that I described above.
This update can be dirty flashed (Clear cache and Dalvik cache)
Click to expand...
Click to collapse
Installed previous build and now updated. Seems reliable so far. Thanks

Thanks for that, zsoerenm. After your "advertisment" I've read about microG and the Aurora store and will give it a try if it works for me.
Do you plan to develop both versions in parallel?

Yes, I plan to support both version in parallel.

which version is best for battery performance? (MicroG or Normal)
and can you work on battery drain? in tarkzim version a little darin in battery, (if it work like original 5.0.2 version is very good)
and another problem in tarkzim version is call in speaker mode and Bluetooth call mode (its Voice echoes and poor qaulity in other hand listen to me)

I haven't compared the battery performance to the exact values. I think both have outstanding good performance in battery. I have replaced my old battery with a new one about 3 years ago though. Without much usage it lasts longer than 20 hours. My guess is that microG has better battery performance.
I have recognized voice echoes and poor quality using bluetooth call, too. If I have time, I will tackle this issue.

I'm using the recent version with magisk now since 8 weeks and want share some points I've recognized:
- Reboots and sometimes black screens occour about 1-2 times a day. For me it is somehow ok.
- WiFi hangs up and cannot be disabled anymore so a manuell reboot is needed 1-3 times a day. The problem is, that the phone phone is offline and it is not recognizable.
- Battery usage seems normal. But after a reboot it shows sometimes significant lower SoC. Looks like an calibration issue. I will change the battery with a new one the next days and will see if it is due to the old battery.
- the sim PIN is always asked 2 times, but you have to input it once. Is this meant to be for dual sim verions, which my phone isn't?
- bluetooth headsets do not work for phone calls at all. Tried Sony, Jabra and my car. Bluetooth audio playback is working.
All this I think also occour with tarkzims 18.1 rom as well.
I'm happy to got rid of the play services and play store. I really miss nothing.
All in all many thanks to making me able to extend this phones live as it has all i need (especially the good speakers) and I'm not able to find a good successor.

New build released
Updated Android with August 2022 security patches.

beanpeti said:
I'm using the recent version with magisk now since 8 weeks and want share some points I've recognized:
- Reboots and sometimes black screens occour about 1-2 times a day. For me it is somehow ok.
- WiFi hangs up and cannot be disabled anymore so a manuell reboot is needed 1-3 times a day. The problem is, that the phone phone is offline and it is not recognizable.
- Battery usage seems normal. But after a reboot it shows sometimes significant lower SoC. Looks like an calibration issue. I will change the battery with a new one the next days and will see if it is due to the old battery.
- the sim PIN is always asked 2 times, but you have to input it once. Is this meant to be for dual sim verions, which my phone isn't?
- bluetooth headsets do not work for phone calls at all. Tried Sony, Jabra and my car. Bluetooth audio playback is working.
All this I think also occour with tarkzims 18.1 rom as well.
I'm happy to got rid of the play services and play store. I really miss nothing.
All in all many thanks to making me able to extend this phones live as it has all i need (especially the good speakers) and I'm not able to find a good successor.
Click to expand...
Click to collapse
I have reboots and black screen very seldomly (once a week or so)
Yes, I've also observed WiFi hang ups. Those are actually quite annoying. Apparently the wpa_supplicant is going into state D. I was unable to find the root cause of this. If someone has an idea, I'm will be happy to dig further.
I haven't got a bluetooth headset, so I cannot test it.
I'm glad that you like the ROM nonetheless.

There are a few thing I haven't tried yet but so far this seems to run beautifully. Performance is better than I ever would have expected from this phone and my battery life is also much better than the last ROM I came from. Bluetooth earphones seem to work fine so far, the only bug I've noticed is that if i turn on the torch, it switches off shortly after saying something about the camera being in use. I'm really surprised by how good this is, thank a lot!

Nice ROM. Had "No SIM" issue, solved by flashing lineage 17.1, then wiping everything and installing this ROM. Thanks

Bug report: when I open flashlight, it will turn on the flashlight but show "camera in use" message after it turn on and then turn off the flashlight immediately.

Hi, I'm still using this ROM since a few months now.
I got my bluetooth headsets to work but still facing often reboots or wifi hang ups. Sometimes the sim got lost and I have to reboot.
As the internal flash memory has run out of space I have freed space and it seems that it has run more stable after that.
But sduddenly since yesterday it refuses to boot again after the htc boot logo.
Will install it again and try if I will get it to work again. Hope my spare battery is still good because I try to change the old one (second in life). I'm not sure if it's because a weak battery which was recognized with very random soc.
Is this ROM still maintained? Would be great but I guess this device will die out due to it's high age.

Database Info

welcome