Hi folks.
Since I'm on Oxygen OS 9.0 there are a lot of soft reboots. I was looking for the reason but everything I tried won't affect the system. LogCat in the attachment.
Local update to 9.0 , stock Kernel, rooted with Magisk 17.2 Beta the latest TWRP Blu_spark.
Related
So I experienced a "little" trouble after the Pie update, when trying too root my phone again.
Which one of you Oneplus 6-ers with rooted and "normal" phones also had problems after the Pie update?
And which one of you had the perfect update?
Perfect update here.
Coming from 5.1.5 straight to 9.0
Flashed bluspark.zip while still on 5.1.5, reboot to twrp, flashed Android Pie + twrp.zip + magisk 17.2, reboot twrp flash Android Pie + twrp.zip + magisk.zip again in second slot, reboot system.
Worked without any issues
From 5.11 to 9.0 with no issues. Updated to blue spark TWRP. Flashed full ota. Flashed TWRP again and Magisk 17.2. rebooted to TWRP, flashed TWRP and Magisk again and all was perfect. After first reboot I flashed EX Kernel 3.01 for pie and no Hicks and same insanely good battery life. No rogue apps (68 apps) at all.
Perfect here.
Updated dirty flash from twrp from 5.1.8 - 5.1.9 - beta 1 - beta 2 - beta 3 - stable pie - beta 4 never had an issue beside the device is corrupted message, i just ignored that one.
Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
paul0909 said:
Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
Click to expand...
Click to collapse
After updating OOS you need to re-flash TWRP (stock recovery after OOS update), then Magisk.
What Magisk modules are you using? Most likely the issue if you did what I mentioned above (unclear from your post.
Not many modules, vanced youtube, a call recorder, i honestly can't remember the others, when i get this fixed I'll tidy it up.
To be honest I only wanted magisk for YouTube vanced and installed it before I knew there was a non root option.
PS, I did flash TWRP then magisk, it's been working since I got the phone the week they came out, but the last 2 or 3 software updates have not been smooth like they used to and I get a bootloop
I'm wondering if I can install Android 10/Q over Pie without having to clean flash. On the Pixel 3 there were issues during rooting when there wasn't a clean update.
gvsukids said:
I'm wondering if I can install Android 10/Q over Pie without having to clean flash. On the Pixel 3 there were issues during rooting when there wasn't a clean update.
Click to expand...
Click to collapse
I'd say try it out. I just installed Android 10 yesterday via ADB sideload over Android Pie with TWRP. As always, perform a backup in TWRP before going forward with anything.
Edit: to clarify as well, I was rooted with Magisk and TWRP on Android Pie. Using TWRP/adb sideload, the OS updated without any issues. After that, I installed TWRP and Magisk v. 20.1 again and have been fine for 16 hours.
Hi, hoping a kind soul out there will help to confirm a few things about moving to Android 10 from Android 9
I haven't bothered keeping my phone up to date for around a year, and I'm just looking into updating to stock OOS 10 for now.
I'm currently rooted with TWRP & Magisk running an old Android 9 custom ROM, and there seems to be a bit of confusion around TWRP and updating to android 10. I'm looking to completely format the phone, not worried about loss of data as I'll just restore titanium backups, so my plan is this to get a clean install with TWRP + Magisk+Gapps:
1) Reboot to current bluspark TWRP, Flash OOS 10.3.0, Flash twrp-3.3.1-16 mauronofrio installer.zip, Reboot to recovery
2) Flash OOS 10.3.0, Flash twrp-3.3.1-16 mauronofrio installer, flash Magisk 20.3, flash GApps arm64 10.0 nano, reboot to system & enjoy.
This was always my normal update process so i'm pretty comfortable with this way if it will work.
Can anyone confirm if this will cause issues due to TWRP not working properly with android 10 when i preform my first reboot to recovery? My thinking is that if I flash it after installing android 10 then any issues caused by android 10 should be fixed, is this correct?
Thanks!
There is no confusion at all.
Everything is clear since months ago that 10.3 was released.
Upgrade firstly to the latest 9.x Rom, then flash the latest TWRP and then u are ready for flashing 10.3 and latest magisk.
Sent from my ONEPLUS A6003 using Tapatalk
ok, so I have to go to OOS 9.09 with twrp-3.3.1-16-enchilada-Pie-mauronofrio, before upgrading to 10..3.0 & twrp-3.3.1-16-enchilada-Q-mauronofrio, even if I want to just do a full wipe and start fresh on 10.3.0?
Paratax said:
ok, so I have to go to OOS 9.09 with twrp-3.3.1-16-enchilada-Pie-mauronofrio, before upgrading to 10..3.0 & twrp-3.3.1-16-enchilada-Q-mauronofrio, even if I want to just do a full wipe and start fresh on 10.3.0?
Click to expand...
Click to collapse
This is the latest TWRP: twrp-3.3.1-x_blu_spark_v9.108_op6
The rest has already been discussed.
Sent from my ONEPLUS A6003 using Tapatalk
Hello
Strange think for me, maybe not for you
I switch from carbon 8 and came back to lineage 16.
I'm not able to achieved installation with latest lineage 16, lineage microG or lineage17. Flashing the new rom works well, but after lineage home screen, the phone reboot to recovery.
With an lineage16 old version from 03/2019,install is ok and phone boot well.
I've suspected an old twrp version, but I'm on 3.3.1.0.
Any idea ?
thank you
it's the same with an old twrp version 3.2.
Ok, solved. You shouldn't install twrp as an app before rebooting to new os version.